Pelco CM9700UTP16A Specsheet

PRODUCT SPECIFICATION

video transmission

CM9700UTP Series Multichannel Video Receiver

ACTIVE VIDEO TRANSMISSION OVER UNSHIELDED TWISTED PAIR

Product Features

• 16- or 32-Channel Active Video Receiver

• Full Motion Color/Black-White Video up to 4,000 ft (1,219 m)

• Adaptive Video Equalization Technology Within Deﬁned Distance

Range

• Video, Fan, and Temperature Indicators and an Audible Alarm

• UTP Range Selection and Indicators

• Each Channel Has a BNC Connector for Video Output

• Compatible with All Pelco Cameras, Enclosures, and Domes

Equipped with Twisted Pair

• Video Ribbon Cable Connectors for Connecting to a

CM9700 Series Matrix

• Easy Termination with RJ-45 UTP Connectors

• Optional Patch Panels Convert RJ-45 Connections to Individual

Screw Terminal Connections

The

CM9700UTP Series

32-channel unit that can receive live video over unshielded twisted pair (UTP) cable. The or black-white video up to 3,000 ft (900 m) using Cat5 or 4,000 ft (1,200 m) using Cat5e or Cat6 UTP cable. The unit can be connected to the optional TW3016-PATCH1 or TW3032-PATCH1 patch panel. Each unit can be connected to a CM9780-MXB matrix using the provided video ribbon cable connectors.

The

CM9700UTP Series

the unit quick and easy to conﬁgure and use. The unit provides a rotary switch and LED for each channel. Use the rotary switch to select a UTP cable distance: 1,000 ft (300 m); 2,000 ft (600 m); 3,000 ft (900 m); or 4,000 ft (1,200 m).

For optimal tuning, adjust the rotary switch to the correct color video range position; the device automatically adjusts the gain and adapts to the cable length. The channel LED glows green when color video is received over UTP and the unit is properly tuned, orange when blackwhite video is received, and red when no video is received over UTP.

CM9700UTP Series

multichannel active receiver is a 16- or

receives full motion color

front panel controls and indicators make

CM9700UTP16A

CM9700UTP32A

• Supports NTSC and PAL

• Built-In Surge Suppression for UTP Video Inputs

• Can Be Mounted into a Standard EIA 19-Inch Rack

The

CM9700UTP Series

power. If a fan fails or the unit operating temperature rises above 95°F (35°C), the Pelco badge ﬂashes and an alarm sounds. Additionally, each fan is equipped with an LED that glows red to indicate fan failure.

The unit's adaptive video equalization technology ensures high-quality video processing by correcting for video transmission losses over UTP cable within the selected distance range. The automatically adapts to cable lengths within the selected range for composite signals with colorburst, and it allows ﬁxed-equalization settings for video signals without burst. The device also compensates for low frequency and chroma band losses.

Conveniently make video input and output cable connections through the unit’s back panel. The 32-channel BNC video output connectors and eight RJ-45 UTP video input ports (four video inputs per port). One or two video ribbon cable connectors, depending on the model, are provided for interfacing the

CM9700UTP Series

Pelco badge glows blue when the unit has

CM9700UTP Series

to a CM9780-MXB matrix.

provides 16- or

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C3646 / REVISION 8-10-09

TECHNICAL SPECIFICATIONS

MODEL

CM9700UTP16A 16-channel active receiver; 16 BNC

connectors, four RJ-45 video input connectors, and one ribbon cable connector

CM9700UTP32A 32-channel active receiver; 32 BNC

connectors, eight RJ-45 video input connectors, and two ribbon cable connectors

A sufﬁx of -US, -UK, -EU, or -AU is added to the model number when ordering a region-speciﬁc power cord. For example, CM9700UTP32A-US is the base model with a power cord for use in the United States. Refer to the following table.

Sufﬁx Part Number Region

-US US-320-C13 United States

-UK UK-320-C13 United Kingdom, Ireland, and Hong Kong

-EU EU-320-C13 Most of continental Europe

-AU AU-320-C13 Australia and New Zealand

SUPPLIED ACCESSORIES

1 power cord (USA, UK, EU, or AU) 8 UTP Cat5e cable assemblies, 2.0 ft (0.61 m) Rack hardware

VIDEO

Video Standards NTSC/PAL/EIA/CCIR composite Video Outputs

CM9700UTP16A 16 BNC and 1 ribbon cable connector

CM9700UTP32A 32 BNC and 2 ribbon cable connectors Frequency Response 50 Hz to 6 MHz Common Mode/Differential

Mode Rejection >60 dB

Video Output 1.2 Vp-p

ELECTRICAL

Input Voltage 100 to 240 VAC, 50 to 60 Hz, autoranging Input Current

CM9700UP16A 0.38 A

CM9700UPT32A 0.75 A Wire Type UTP (24 AWG minimum) Wire Category Cat5, Cat5e, or Cat6 Wire Distance

Cat5 3,000 ft (914 m)

Cat5e and Cat6 4,000 ft (1,219 m) DC Loop Resistance 20 ohms per 328 ft (100 m) Differential Capacitance 6.6 nF/328 ft (100 m) maximum Transient Immunity 300 W peak pulse power (8/20 US) Single wire (solid) 24 AWG (0.25 mm2) Stranded wire (ﬂexible) 24 AWG (1.0 mm2)

MECHANICAL

Connectors

BNC Video output Ribbon Cable Connector Video output RJ-45 UTP input

Power Connector IEC connector Construction Steel chassis, aluminum front panel Finish Black matte ﬁnish

FRONT PANEL INDICATORS/FUNCTIONS

Pelco Badge

Power Blue

Temperature and Fan Status Flashes blue

Alarm Status Audible Video Status Green, red, orange Fan Alarm Red

ENVIRONMENTAL

Operating Temperature 32° to 95°F (0° to 35°C) at unit air intake Relative Humidity 90% maximum, noncondensing

Note:

The temperature at the unit air intake can be signiﬁcantly higher than room temperature. Temperature is affected by rack conﬁguration, ﬂoor layout, air conditioning strategy, and other issues. To prevent performance failure and unit damage, make sure the temperature at the unit is continuously within the operating temperature range.

PHYSICAL

Dimensions 9.00" D x 18.80" W x 1.72" H

Weight (approximate) Unit

CM9700UTP16A 8.10 lb (3.68 kg) 13.00 lb (5.90 kg) CM9700UTP32A 9.25 lb (4.19 kg) 14.00 lb (6.40 kg)

(23.00 x 47.80 x 4.37 cm)

Shipping

CERTIFICATIONS/RATINGS

• CE, Class B

• FCC, Class B

• UL/cUL Listed

• C-Tick

OPTIONAL ACCESSORIES

TW3001P Single-channel passive transceiver TW3004P 4-channel passive transceiver TW3008P 8-channel passive transceiver TW3016P 16-channel passive transceiver TW3032P 32-channel passive transceiver TW3001AT Active transmitter TW3016-PATCH1 16-channel patch panel TW3032-PATCH1 32-channel patch panel

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

Tel: (800) 289-9100 • FAX: (800) 289-9150

Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120

All product names and services identiﬁed throughout this document are trademarks or registered

trademarks of their respective companies. The absence of a trademark or registered trademark

from this document does not constitute a waiver of intellectual property rights.

Pelco and the Pelco logo are registered trademarks of Pelco, Inc.

Product speciﬁcations and availability subject to change without notice.