PRODUCT SPECIFICATION
analog systems and controls
CM9770 Series Matrix
MICROPROCESSOR-BASED SWITCHER/CONTROLLER; 2,048 INPUTS; 512 OUTPUTS
Product Features
• Microprocessor-Based, Full Cross-Point Video Matrix
• High-Density Architecture Supports up to 256 Cameras and
32 Monitors in Each Bay
• Control up to 2,048 Cameras and 512 Monitors in a Single Node or
Expand Camera Capacity with a Multi-Node System (up to 24 Nodes)
• Full System Reports From CM9700-MGR Provide System Wiring and
Configuration Details
• Sixteen RS-422 COM Ports (Expandable to 120) and Two RS-232
Full-Duplex Ports Available on the CPU
• System Diagnostic LEDs Displayed on Front Panel
• Flash Technology Eases System Maintenance and Upgrades
• Logical Camera Selection and Priority Level Operation
• Multiplexer and DVR Control Via Keyboard
• Built-in Video Loss Detection
• Windows
• Factory Tested Prepackaged Systems
• ASCII Data Input to Interface Access Control and Other External
• Powerful Macro Programming
®
-Based System Management Software (Windows 2000,
XP) Includes Multilanguage Menus and On-Screen Help
Computer-Based Systems
The 9770 System is a full-featured video matrix switching control
system that allows users to view and control up to 2,048 cameras
and 512 monitors on a single node. Expanded monitor capacity in
the matrix bay allows implementation of larger systems with a
smaller footprint (less hardware) than other matrix systems.
The base configuration for the 9770 System is made up of a central
processing unit (CC1), matrix switching bay(s) (MXBs) with video
input/output modules, and keyboard controllers (KBDs). Optional
components can be added to enhance system capabilities.
Preconfigured, prepackaged systems make installation fast and
simple. The 9770 System features a user-friendly Windows-based
management system, which allows for easy system programming
and maintenance.
Optional Accessories
• “Hot Switch” and Backup CPU Ensure Uninterrupted Operation
• Redundant Power Supplies for Switching Bays
• Coaxitron
• Responds to 5,000 Alarms
• Network Interface Unit Allows Multiple Systems to Share Video and
• DVR Management
®
Translator Allows PTZ Communication Over Standard
Coaxial Cable
Control
All CM9770 Series systems require installation by a Pelco Certified Dealer/
Installer . This spe cific at ion s hee t ma y be us ed for pur pos e of info rma ti on only
and does not constitute approval or certification of receiving party. Proof of
certification must be provided pri or to shipmen t of CM9770 Sys tems contained
herein.
Macros allow activation of events based on schedule or alarm.
Macros may call system-wide sequences (tours); activate preset
positions on properly equipped cameras; and activate external
relays to control auxiliary functions such as locking doors (additional
equipment may be required).
The 9770 System also includes built-in video loss detection and
system diagnostic features, indicated by LEDs on the front panel of
the matrix bay. Flash technology incorporated into the system
design allows for easier system maintenance and upgrades.
Optional DVR management allows DVRs to be controlled directly
from the system keyboards. Suitable DVRs can be monitored for
operational conditions ensuring continuous recording.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C1555 / REVISED 11-2-10
SYSTEM COMPONENTS/TECHNICAL SPECIFICATIONS
Diagnostic Monitor Output One VGA
I/O Ports Sixteen RS-422 ports (expandable to 32); total
system capability is 120 ports*
Two RS-232 ports
One parallel printer port
One VGA output port
Two PC-AT compatible keyboard ports
CENTRAL PROCESSING UNIT (CC1)
The central processing unit communicates with external devices and accepts
commands from external computers, keyboards, graphical user interfaces
(GUIs), access control systems, casino data systems, programmable logic
controllers (PLCs), and lighting and intercom systems. An internal VGA card is
included for displaying system diagnostics and for programming. RS-422
COM ports are provided for communication with external devices such as
matrix switching bays, pan/tilt or dome receivers, and keyboards.
ELECTRICAL
Input Voltage 120 VAC, 60 Hz or 230 VAC, 50 Hz, autoranging
Power Consumption 57 W
MATRIX SWITCHING BAY
Each bay includes a power supply and mounting baffle and will support
modules for up to 256 camera inputs and 32 monitor outputs. Multiple bays
can be used to expand a single CPU system to a maximum of 2,048 camera
inputs and 512 monitor outputs. An optional backup power supply module
(MPS) can be installed in each bay to provide redundancy.
ELECTRICAL
Input Voltage 100-240 VAC, 50/60 Hz, autoranging
Power Consumption 60 W maximum (fully populated)
Communication Full duplex RS-422 using an RJ-45 connector
VIDEO
Bandwidth 15 MHz
Signal-to-Noise Ratio -70.5 dB
Adjacent Channel Crosstalk -60.9 dB at 3.58 MHz
Differential Gain 0.51%
Differential Phase 0.38 degrees
Line Tilt 0.40%
Field Tilt 0.59%
Switching Time 16 mS
Inputs Card slots support up to 256 inputs per bay
Outputs Two output card slots for supporting 32 outputs
per bay
Video Input Level 0.5 to 2 Vp-p, RS-170 composite video
Impedance 75 ohms terminating (looping versions
available)
GENERAL
Operating Temperature 32° to 120°F (0° to 49°C)
Dimensions 19.50" D x 19.00" W x 7.00" H
Mounting Fits 19-inch EIA-standard rack (4 RUs)
Unit Weight 29.7 lb (13.5 kg)
Shipping Weight 43 lb (19.5 kg)
CERTIFICATIONS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
V-Sync The Pelco V-Sync signal (sent up the coax
Vertical Drive Input connector available on rear panel
Overall Frequency Response Flat to 8 MHz
Luminance Nonlinearity 20%
GENERAL
Operating Temperature 32° to 122°F (0° to 50°C), non-condensing
Dimensions
Matrix Bay 21.70" D x 19.00" W x 10.50" H
Mounting Baffle** 24.00" D x 19.00" W x 1.75" H
Mounting Fits 19-inch EIA-standard rack (matrix bay:
Unit Weight 33 lb (14.99 kg)
Shipping Weight 44 lb (19.96 kg)
CERTIFICATIONS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
(49.53 x 48.26 x 17.78 cm)
cable) provides a synchronization pulse which
allows roll-free switching between cameras
within the same matrix bay
(55.10 x 48.26 x 26.67 cm)
(60.96 x 48.26 x 4.45 cm)
6 RUs; mounting baffle: 1RU)
52 lb (23.59 kg), fully populated
62 lb (28.12 kg), fully populated
*The CM9700-CC1 is equipped with 16 RS-422 COM ports; total capacity can be expanded to 32 ports by adding two CM9700-SER serial communication cards (8 ports each).
Total system capability can be expanded to 120 RS-422 COM ports by adding three CM9700-SER-32 port expansion units (32 ports each) to the CC1.
**Included with each MXB unit. Total height of MXB with baffle installed is 12.25 inches (31 cm).