Pelco CC3701H-2 User Manual

PRODUCT SPECIFICATION

camera solutions

CC3701H-2 Series Digital CCD Color Camera

1/3-INCH, HIGH RESOLUTION WITH EDR, 480 TVL (NTSC/PAL)

Product Features

• Sony® Super HAD™ Technology

• Extended Dynamic Range (EDR)

• 1/3-Inch Format CCD Imager

• C/CS Lens Mount

• DC/Video Drive Auto Iris Lens Compatibility

• 24 VAC/12 VDC Power

• Line Lock with Phase Adjustment

• Automatic Gain Control (AGC)

• Backlight Compensation

• Electronic Iris

• Horizontal Resolution of 480 TV Lines

• Digital Signal Processing

• Low Proﬁle Top/Bottom Mount

• Optional Integral Feedthrough Mount

CAMERA MOUNTED ON

PCM100 CAMERA MOUNT

(LENS AND MOUNT NOT SUPPLIED WITH CAMERA)

(REAR COVER REMOVED)

The

CC3701H-2 Series

purpose digital camera with 480 TV lines. The camera features two color balance settings, automatic gain control, digital signal processing, automatic backlight compensation, and line lock. To adjust one of the camera’s many ﬁne-tuning features, just reset the corresponding DIP switch, which is readily available on the left side of the camera.

Utilizing innovative technology (patent pending), the

Series

camera provides an extended dynamic range over conventional high resolution cameras, without sacriﬁcing sensitivity, color imagery, or resolution. Extended dynamic range (12X) allows the camera to provide a picture in many extreme light applications.

The

CC3701H-2 Series

other full-featured CCD cameras. In order to keep the camera as small as possible, Pelco engineers designed the camera components to ﬁt within the external dimensions of the unit. Since the BNC, power, and lens connectors stay within the boundaries of the case, the compact camera and a lens ﬁt perfectly inside one of Pelco’s smaller enclosures (EH100, EH3508, EH2508, EH2020, and EH2100). Pelco also has a variety of lenses available to meet your installation requirements.

is a high resolution, high sensitivity, general

CC3701H-2

digital color camera is smaller than most

The

CC3701H-2 Series

generation of 1/3-inch CCD imagers, accepts DC and video drive auto iris lenses, and has adjustable back focus to accommodate C or CS lenses. Back focus adjustment is easy with the lockable thumb wheel, which is accessible from the top or bottom of the camera.

The

CC3701H-2 Series

and its distinctive design is ideal for use in conﬁned spaces. The camera has a quick-connect power connection, BNC video connector, and a removable mount adapter for top or bottom mounting.

Accessories include the PCM100 camera mount designed speciﬁcally for the

CC3701H-2 Series

cabling or hardware. All cable is integrated in the unit making installation quick and easy. The PCM100 can be installed directly to a wall or ceiling, or it can be adapted to a standard 2 x 4-inch (5.08 x 10.16 cm) electrical box.

digital camera also includes the latest Sony

digital camera is quick and easy to install,

. This adjustable mount has no exposed

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C1937 / REVISED 12-29-10

TECHNICAL SPECIFICATIONS

MODELS

CC3701H-2 1/3-inch high resolution digital color CCD

camera, 480 TVL, NTSC format

CC3701H-2X Same as CC3701H-2 except PAL format

GENERAL

Imaging Device 1/3-inch interline transfer CCD Picture Elements

CC3701H-2 768 (H) x 494 (V) CC3701H-2X 752 (H) x 582 (V)

Scanning System

CC3701H-2 525 lines, 2:1 interlace CC3701H-2X 625 lines, 2:1 interlace

Synchronization System

CC3701H-2 Internal or line lock CC3701H-2X Internal or line lock

Horizontal Resolution 480 TV lines Iris Control Electronic/passive Minimum Illumination 0.5 lux, f/1.2, 40 IRE, AGC on, 75% reﬂectance Signal-to-Noise Ratio 52 dB Gain Control Automatic Vertical Phase Adjustable 0° ±1 20° Automatic Gain Control Selectable by DIP switch Backlight Compensation Selectable by DIP switch Signal Processing DSP Auto Iris Lens Type DC/video control Video Output 1 Vp-p, 75 ohms Iris Control Range 1/60 to 1/100,000 second Auto White Balance Range 2,500° to 9,500°K

ELECTRICAL

Power Requirements 18 to 30 VAC or 10 to 36 VDC Power Consumption Less than 4 W Power Connector 2-pin terminal strip, push-in type, with

screw lock Video Connector BNC Lens Jack 4-pin connector (miniature square)

MECHANICAL

Lens Mount C/CS mount (adjustable) Camera Mount 1/4-inch UNC-20 screw, top and bottom of

camera housing

RECOMMENDED MOUNTS

BS1750/CM1750/ CM1750S/TB1750 Adjustable swivel head camera mounts for

wall, ceiling, or pedestal mounting.

C10-UM C10 Series universal wall/ceiling/rail mount

kit

PCM100 Adjustable camera mount for wall or ceiling

application; includes integrated cable for easy plug and play operation; can also be adapted to a standard 2 x 4-inch (5.08 x 10.16 cm) electrical box

RECOMMENDED POWER SUPPLIES

TF2000 Power supply for one 24 VAC camera, 20 VA MCS Series Multiple 24 VAC camera power supply, indoor WCS Series Single/multiple 24 VAC camera power supply,

outdoor

RECOMMENDED LENSES

13VA, VD Series Varifocal lenses, 1/3-inch format

13ZD Series Motorized zoom lenses, 1/3-inch format

VA (manual iris); VD (auto iris, DD)

(auto iris, DD)

4.25

(10.79)

2.01

(5.10)

ENVIRONMENTAL

Operating Temperature 14° to 122°F (–10° to 50°C) Storage Temperature 14° to 158°F (–10° to 70°C)

PHYSICAL

Weight (without lens) 0.77 lb (0.35 kg) Shipping Weight 2 lb (0.9 kg) approximate

CERTIFICATIONS/PATENTS

• CE, Class B

• FCC, Class B

• UL/cUL Listed

• S Mark for Argentina

• U.S. Patent D460,773

NOTE: For outdoor camera installations, a Pelco enclosure is recommended.

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada International www.pelco.com

Tel (800) 289-9100 Fax (800) 289-9150

Tel +1 (559) 292-1981 Fax +1 (559) 348-1120

2.65

(6.73)

2.93

(7.44)

2.45

(6.22)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its afﬁliates. All other product names and services are the property of their respective companies. Product speciﬁcations and availability are subject to change without notice.