Peerless Industries PAP 121-W, PAP 121, PAP 121-S User Manual

Installation and Assembly - Projector Adapter Plate for	Models: PAP 121, PAP 121-S,
Sharp™ model PG-M15X and Net TV LCD Projectors	PAP 121-W

IMPORTANT! Read entire instruction sheet before you start installation and assembly.

Before you start check the parts list below to make sure all of the parts shown are included.

WARNING

•Installer must verify that the ceiling will safely support four times the combined weight of all attached equipment and hardware.

Parts List

	Description	Qty.	PAP 121	PAP 121-S	PAP 121-W
AA	adapter plate	1	055-1207	055-4207	055-2207
BB	1/4 - 20 x 3/8" socket pin screw	1	520-1109	520-2109	520-2109
CC	M3 -.5 x 25 mm thumb screw	1	560-1139	560-7139	560-7139
DD	4 mm allen wrench	1	560-9646	560-9646	560-9646
EE	retaining spacer	1	590-1128	590-2128	590-2128
FF	spacer	1	590-0108	590-0108	590-0108
GG	M3 - .5" x 6 mm phillips pan	1	520-1028	520-2036	520-2036

Note: Actual parts may appear slightly different than illustrated.

CC	BB AA
CC
	DD
GG	EE
	FF

Flip projector upside-down and attach adapter plate (AA) using one socket pin screw (BB) and one phillips screw (GG) as shown. Tighten screw (BB) using 4 mm allen wrench (DD).

*Notch indicates front of projector.

Secure adapter plate with thumb screw (CC), spacer (FF) and retaining spacer (EE) in remaining hole.

AA BB

1 of 1	ISSUED: 12-27-01 SHEET #: 055-9073-5 03-09-05
Visit the Peerless Web Site at www.peerlessindustries.com	For customer service call 1-800-729-0307 or 708-865-8870.

All other brand and product names are trademarks or registered trademarks of their respective owners