Peerless Industries PAP 113, PAP 113-S, PAP 113-W User Manual

Installation and Assembly - Projector Adapter Plate for
Mitsubishi
Models: PAP 1 13, P AP 1 13-S,
P AP 1 13-W
IMPORT ANT! Read entire instruction sheet before you start installation and assembly.
Before you start check the parts list below to make sure all of the parts shown are included.
Parts List
Description
AA adapter plate BB M4 x .7 x 12 mm socket pin screw CC 4 mm security wrench (for PAP only) DD L bracket EE M4 x .7 x 6 mm socket pin screw FF adhesive foam pad
Note: Actual parts may appear slightly different than illustrated.
*Notch indicates front of projector. Turn projector upside down. Attach adapter plate (AA) to projector using three screws (BB).
Qty.
1 3 1 2 2 2
PAP 113
055-1186 520-1079 560-9646 055-1212 520-1059 570-0008
PAP 113-S
055-4186 510-2079 560-9646 055-4212 520-2059 570-0008
WARNING
• Installer must verify that the ceiling will safely support four times the combined weight of all attached equip­ment and hardware.
PAP 113-W
055-2186 510-2079 560-9646 055-2212 520-2059 570-0008
BB
CC
Adhere foam pads (FF) to L-brackets (DD). Secure projector by attaching two L-brackets to adapter plate (AA) using two screws (EE). Tighten all screws using 4 mm security allen wrench (CC).
EE
DD
FF
AA
BB
EE
AA
AA
*
ADHERE PADS TO L-BRACKETS
1 of 1
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
© 2004 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark of Peerless Industries, Inc. All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED:10-30-01 SHEET#: 055-9063-6 08-05-04
Loading...