Panasonic WV-CU50 Operating Instructions

Remote Controller

16

Remote Controller

WV-CU50

LOCK

LINK

COPY

SET

REC

PREVIEW

SEQUENCE

GROUP

SELECT

ALARM

SEARCH

ALARM

RESET

DISPLAY

REC

STOP

REC

FWD

STOP

PLAY/ PAUSE

INDEX

EL-ZOOM

SPOT

MULTISCREEN

MULTISCREEN

SELECT

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

please read these instructions carefully and save this manual for future use.

Before attempting to connect or operate this product,

CAUTION

Read the label on the bottom of the unit for identification
of the product and the power ratings .

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead sym­bol, within an equilateral triangle, is
intended to alert the user to the pres­ence of uninsulated "dangerous voltage"
within the product's enclosure that may

SA 1965

SA 1966

be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilat­eral triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the appli­ance.

Model No.

WV -CU50

For U.S.A

NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device, pur­suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harm­ful interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio com­munications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will
be required to correct the interference at his own
expense.

FCC Caution: To assure continued compliance, (exam­ple - use only shielded interface cables when connecting
to computer or peripheral devices). Any changes or mod­ifications not expressly approved by the party responsi­ble for compliance could void the user’s authority to
operate this equipment.

The serial number of this product may be found on the
bottom of the unit.
You should note the serial number of this unit in the
space provided and retain this book as a permanent
record of your purchase to aid identification in the event
of theft.

Model No.
Serial No.

REMOTE

16151413

121110

9

5678

4321

PAUSE

Remote Controller

WV-CU50

FWDREV

LINK

RECPLAY/STOP

STOP

REC

ALARM

SEARCH

INDEX

GROUP

EL-ZOOMSEQUENCE

PREVIEW

REC

MULTISCREEN

SELECT

SPOT
MULTISCREEN

COPY

LOCK

SELECT

!1

q

w

e
r

t
y

@2

i

u

o

!0

!2

!3

!6

!5

!7
!8

!9

@0

@1

@3

ALARM
RESET

SET

!4

DISPLAY

■General

The WV-CU50 Remote Controller is designed for exclusive control of the WJ-HD500 Digital Disk Recorder.
The Jog-Shuttle and buttons on the panel enable the operator to control the Digital Disk Recorder remotely. Setups for the
Disk Recorder cannot be input with the Remote Controller.
For details refer to the operating instructions supplied with in the Disk Recorder.

■Appearance

q Lock Button (LOCK)

Toggles to enable or disable the button lock func­tion on both front panels of the Disk Recorder and
Remote Controller.
The LED indicates the status as shown below.

On: The button lock is enabled.
Off: The button lock is disabled.

While On, the button lock will be released only if the
preset password is entered in the password inquiry
window.

w Monitor Selection Button

(SPOT / MULTISCREEN)

Selects either the Spot or Multiscreen Monitor for
which you wish to control the display on the screen.
The LED indicates the status as shown below.

On: The Spot Monitor is selected.
Off: The Multiscreen Monitor is selected.

e Multiscreen Selection Button

(MULTISCREEN SELECT)

Selects the multiscreen pattern to be displayed on
the Multiscreen Monitor.
Pressing this button will change the screen pattern
as follows.

4 → 7 → 9 → 10 → 13 → 16 → 4 screen segments

r Recording Preview Button (REC PREVIEW)

Use this button to display the playback image with
the live images on the Multiscreen Monitor.
The LED indicates the status as shown below.

On: The selected playback image is displayed
Blinking: Prompts you to select the numeric button

for displaying the playback image.