Panasonic WJ-ND400-4000T4 Specsheet

Network Disk Recorder

Version 1.03

WJ-ND400

WJ-ND400 (120 V AC) WJ-ND400 (220 ~ 240 V AC)

High performance Network Disk Recorder for Megapixel i-Pro Network Cameras with 9 Serial ATA HDD slots

Key Features

• MPEG-4 and JPEG multi format

• Up to 64 network cameras can be connected without extra license fee and their images can be recorded simultaneously.

• 200 Mbps high throughput: Best match with Megapixel i-Pro Network Cameras

•

Various Recording Modes: Manual, Schedule including Event (Pre/Post), Emergency. Schedule mode includes eight recording programs with individual recording mode for each camera, and 6 time schedules per day.

• Panasonic camera control: Pan/Tilt, Zoom, Focus, Brightness, Preset Position, Auto mode (depending on camera model).

• Audio from i-Pro network cameras can be recorded and played back, G.726 (ADPCM) 32 kbps.

•

Cameras can be assigned to one of the 8 groups for easier browsing.

• Flexible playback controls: Goto Date (Jump to specific time/date), Goto Last (Jump to 5 sec. ~ 5 min. before the record end).

• Various display modes: Spot, Quad (16 patterns), Spot Sequence, Quad Sequence (Live).

• Filtered search: Time & Date, Event Type, Camera number.

•

VMD search: Motion in a specified area in the recorded images can quickly be searched (works with supported i-Pro cameras and WJ-NT314).

• 2x, 4x Digital zoom (Live/Playback)

•

Recorded images can be downloaded to a PC. Downloadable viewer software allows playback of images downloaded from the recorder.

•

Various alarm sources include 32x Terminal inputs, 64x Camera alarms, Panasonic Alarm Protocol. Flexible alarm actions include Event recording,

E-mail notification, Alarm message, Camera positioning, FTP image transfer,

Terminal output, Panasonic alarm protocol output, Buzzer and LED.

•

2x built-in network interfaces (10Base-T / 100Base-TX / 1000Base-T for camera recording and client access

•

Up to 16 clients can monitor images and control WJ-ND400 simultaneously.

• FTP client function enables periodic live image transfer or recorded image transfer in response to an alarm.

•

Performance measurement function for appropriate recording frame rate setup

• Images recorded in the SD memory card in i-Pro network cameras can be transferred to the recorder automatically even when the recorder is in recording status.

• Setup can be made with the user friendly browser GUI. Multilingual

• User/Host authentication, 4 programmable user levels, 16 user

• Alteration detection and recorded data encryption for data security

• Multi-recorder-Multi-site-system can be made with optional WV-

• Up to 9 Serial ATA HDDs can be installed.

•

• Disk partitioning including Normal, Event, Pre-Event, Copy for

• RAID5/6 redundant recording for data security

•

Standard Accessories

)

Optional Accessory

options include English / French / Spanish / Germany / Italian / Russian / Chinese / Japanese.

priorities and User-Camera View/Control partitioning set up for sophisticated user management. Up to 32 user registrations

ASM100 i-Pro Management Software.

With hot plug support, the HDDs can be removed without interrupting the recording. HDD capacity is expandable up to 54 HDD slots (9 HDD slots in the main unit and 5 optional WJ-HDE400 Hard Disk Extension Units each with 9 HDD slots).

flexible record management

Superior reliability with an embedded OS compared to PC-based system

• CD-ROM* ...................................... 1 pc.

• Installation Guide .......................... 1 pc.

• Quick Reference Guide................. 1 pc.

The CD-ROM contains the operating instructions (PDFs)

The following are for installation:

• Power Cord (NTSC model) ........... 1 pc.

• Key .............................................. 2 pcs.

Hard Disk Extension Unit

WJ-HDE400

• Label ............................................ 1 pc.

• Rack Mounting Bracket .............. 2 pcs.

Rack Mounting Bracket fixing screw

• Handle for Rack Mounting Bracket

•

• Handle fixing screw for

Rack Mounting Bracket ............... 4 pcs.

• Washer ....................................... 4 pcs.

... 6 pcs. ... 2 pcs.

Specifications

TV System NTSC PAL Supported

Supported Cameras Panasonic i-Pro series Network cameras (Contact Panasonic for BB series and Axis

Cameras

Supported Image Format Supported Image Resolution Supported Audio Format Maximum Number of Cameras

Recording

Recording Mode Manual, Schedule including Event (Pre/Post), Emergency Pre-Event Recording Up to 15 minutes with dedicated HDD for Pre-Event.

Scheduled Recording Mode Frame Rate/Camera Camera Control

Browser GUI REC/Playback Control REC, PLAY, Rev PLAY, Pause, Stop, FF, REW, Prev Record, Next Record,

Search Mode Filtered search: Time date, Event type, Camera number

Display Mode Camera Grouping 8 groups each with 16 characters title Image Download Recorded data of selected camera and time range can be downloaded

SD Memory Data Images recorded in the SD card in the i-Pro series cameras can be

Download transferred to the recorder automatically. Copy Camera Title

Clock Display

Alarm Control Reset, Suspend

Digital Zoom 2x, 4x

System Log Operator access (100), Network error (1,000), Error (100), Event (750)

System Setup

GUI Language English, French, Italian, Spanish, German, Russian, Chinese, Japanese

Supported OS Microsoft

Supported Browser Windows

Alarm/ Alarm Source 32x Terminal inputs, 64x Camera alarms, Panasonic Alarm Protocol Event Event Mode Alarm / Activity / OFF

Alarm Action

Alarm Control Reset, Suspend Event log 750 Network Network Interface

Maximum Band Width Total 200 Mbps

Bandwidth Control (Client Port)

Supported Protocol TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, RTP

E-mail Upon Alarm or Warning FTP Client Upon alarm or Periodic transfer

No. of Simultaneous Users User Registration Up to 32 users User level 4 Levels (Programmable) Partitioning User - Camera (View only, View & Control, No Access)

Security Method

External

Alarm Connector Interface

(D-sub25pin)

Alarm/Control Alarm

Connector Control Emergency recording input*1, Power outage detection input*1, External

(D-sub25pin) recording mode switching

EXT Storage

Other

Time Synchronization Terminal (Master or Slave), NTP (Server/Client)

Functions

Summer Time User definable (using menu setup)

HDD Type

Maximum Capacity 54 HDD slots (with 5x WJ-HDE400 Extension Units, 9x HDDs installed in each unit)

RAID RAID 5/6 supported Partitioning Normal / Event / Pre-Event / Copy

Viewer Playback Control Software Additional Functions Alteration detection, Save as JPEG, Two times zoom, Print

Supported OS, Language

General

Safety/EMC Standard UL (UL60065), FCC (Part15 ClassA), CE (EN60065, EN55022 ClassB,

Specifications

Power Source 120 V AC, 60 Hz 220 ~ 240 AC, 50 Hz Power Consumption approx. 170 W

Ambient Operating Temperature

Ambient Operating Humidity

Maximum Operating Altitude Dimensions 430 mm (W) x 132 mm (H) x 400 mm (D)

*1: Non-voltage make contact, +5 V pull-up 150 Ω *2: Open collector output, 24 V max., –100 mA *3:

Weight

High (+5 V ~ +12 V, 6.3 mA maximum) *4: 52 kΩ, 5 V pull-up, –100 mA / make contact *5: 200 mA at maximum

MPEG-4, JPEG, M-JPEG 1,280 x 960, 960 x 720, 640 x 480, 320 x 240 (Depending on the camera) G.726 (ADPCM) 32 kbps 64

Shorter Pre-Event recording is possible without dedicated HDD. 8 programs, 6 time zones/day, Independent setup for each day of the week Up to 30 ips (Depending on the Camera) Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256), Auto mode

Prev Image, Next image, Goto Date, Goto Last (5 sec. ~ 5 min.), Area select

VMD search: one detection areas per search (works with supported i-Pro cameras and WJ-NT314) Spot/Quad (16 patterns) / Spot Sequence / Quad Sequence (Sequence: Live only)

to a PC. Viewer software can be downloaded separately.

Recorded data of selected cameras and time date range can be copied to the COPY partition. On the browser, Up to 16 Characters On the browser. Time: 12 H/24 H, Date: 3 formats (YY.MM.DD, MMM.DD.YY, DD.MMM.YY)

Setup page in English, French, Italian, Spanish, German, Russian, Chinese, Japanese

Windows Vista® Bussiness 32 bit Microsoft® Windows® XP Home Edition SP2 Microsoft® Windows® XP Professional SP2 The language of the OS must be same as selected GUI language.

Internet Explorer® 7.0 Microsoft® Internet Explorer® 6.0 SP2

Alarm recording, e-mail notification, Alarm message, Camera positioning, FTP image transfer, Terminal output, Panasonic alarm protocol output, Buzzer, LED

Camera port: 10Base-T / 100Base-TX / 1000Base-T (RJ-45) Client port: 10Base-T / 100Base-TX / 1000Base-T (RJ-45) Maintenance port: 10Base-T (RJ-45)

32 K / 64 k / 128 k / 256 k / 512 k / 1,024 k / 2 M / 5 M / 10 M (bps) and unlimited

User authentication (ID and password), Host authentication (IP address), Alteration detection, HTTP Port No. (1 ~ 65,535 except for reserved numbers), FTP Port No. (1 ~ 65,535 except for reserved numbers)

Alarm Alarm input 1 ~ 7, 17 ~ 32

Alarm input 8 ~ 16*1, 1x Alarm output*2, 1x Alarm reset input*1, 1x Alarm suspend input

Time adjustment input/output

Error/ Network error output*2, Available disk space warning output*2, Warning HDD error output

High-speed serial interface 1.5 Gbps (theoretical value) Only for WJ-HDE400 Extension Unit

1x 3.5 inch Serial ATA HDD, Up to 9x HDDs can be installed.

Play, Rev Play, Pause, FF, REW, Prev Record, Next Record, Prev Image, Next image

Same as browser GUI, Language of the software will be English

C-UL (CAN/CSA C22.2 No.60065), EN55024), GOST (R 51558), C-Tick DOC (ICES003 ClassA)

+5 °C ~ +45 °C (41 °F ~ 113 °F) 5 % ~ 90 % (no condensation) 2,000 m (6,500 feet) above sea level

(16-15/16" (W) x 5-3/16" (H) x 15-3/4" (D)) (excluding rubber feet and projections) 14 kg (30.9 lbs.) with 1 HDD (Factory default) 20 kg (44.15 lbs.) with 9 HDDs

, Power outage recovery completion output*3,

, +5 V output

, Camera error output*2, Error output

cameras)

DISTRIBUTED BY:

Part Names and Functions

Front View

Error Indicator Alarm Indicator Alarm Suspention Indicator Buzzer Stop Button LCD HDD Indicators Key Hole Maintenance Port

Recording Indicator Timer Indicator Operate Indicator Arrow Buttons SET Button Escape Button Link Indicators Front Cover

USE Button HDD Unit HDD Status Indicator HDD Access Indicator HDD Bay Slots RAID Mode Switch Removal Knob

Rear View

Handle for Maintenance Alarm/Control Connector Alarm Connector Cable Clamp Fixing Holes

External Storage Connector Client PC Port Camera Port Signal GND Terminal

Appearance

480 (18-7/8")

465 (18-5/16")(Mounting Pitch)

430 (16-15/16")

372 (14-5/8")

Trademarks and registered trademarks

–Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S.

and other countries. –Axis is a registered trademark of Axis Communications AB. –"Super Dynamic", "SDII", "SDIII " and "i-Pro" logos are trademarks or registered

trademarks of Panasonic Corporation. Important –Safety Precaution: carefully read the operating instructions and installation manual

before using this product. –Panasonic can not be responsible for network performance and/or other manufacturer

products that reside on the network.

• All TV pictures are simulated.

• Weights and dimensions are approximate.

• Specifications are subject to change without notice.

• All product pictures are NTSC models.

132 (5-3/16")

33.5 (1-5/16") 400 (15-3/4")

128

57.1 (2-1/4") (Mounting Pitch)

Power Cord Inlet Power Switch

126.4 (5")63

10.3 (3/8")

(5-1/16")

(13/16")

267 (10-1/2")

(2-1/2")

(1/2")

http://panasonic.net/security/

Printed in Japan (2A-036BL)