
Genaral
Power Source 120 V AC, 60 Hz
Power Consumption Approx. 35 W
Ambient Operating Temperature
+5 °C ~ +45 °C (41 °F ~ 113 °F)
Ambient Operating Humidity 5 % ~ 90 % (non condensing)
Maximum Operating Altitude 2,000 m (6,500 feet) above sea level
Dimensions 270 mm (W) x 88 mm (H) x 360 mm (D)
(10-5/8" (W) x 3-1/2" (H) x 14-1/4" (D))
(excluding rubber feet and projections)
Weight 5.0 kg (11 lbs.)
HDD
HDD Type/Function 2.5-type removable HDD x 1 (Up to 2 HDDs)
Mirroring mode available (only when 2 HDDs are installed)
Input/Output
ALARM/CONTROL Connector Alarm suspension input
*1
, Alarm reset input*1,
Emergency recording input
*1
, Power outage detection input*1,
External recording mode switching
*1
, Alarm output 8-16*2,
Network error output
*2
, Available disk space warning output*2,
HDD error output
*2
, Camera error output*2, Error output*2,
Power outage recovery completion output
*3
,
Time adjustment input/output
*4
, +5 V output*5(D-sub 25-pin)
ALARM Connector Alarm input 1-16
*1
, Alarm output 1-7*2(D-sub 25-pin)
Network Port 10BASE-T/100BASE-TX (RJ-45)
Maintenance Port 10BASE-T (RJ-45)
OPTIONAL COMPONENTS & ACCESSORIES
*1: Non-voltage make contact, 100 mA, +5 V pull-up
*2: Open collector output, maximum under conditions of 24 V DC and 100 mA or less
*3: HIGH (+5 V ~ +12 V, 6.3 mA max.)
*4: 52 kΩ, 5 V pull-up, –100 mA/make contact
*5: 200 mA max.
Front View Rear View
Timer Indicator
Recording Indicator
Camera Link Indicator
Operate Indicator
Alarm Indicator
Buzzer Stop Button
Alarm Suspension Indicator
HDD Access Indicators
Mirroring Indicator
Error Indicator
USE Button
FORMAT Button
Overwrite Protection Indicator
Maintenance Port
Network Port
Alarm Connector
(ALARM, D-sub 25-pin, Female)
Alarm/Control Connector
(ALARM/CONTROL, D-sub 25-pin)
Signal Ground Terminal
(SIGNAL GND)
Power Switch
Power Cord Inlet
Key Hole HDD Bay Slot
Inside the Front Cover
MAJOR OPERATING CONTROLS & TERMINALS
SPECIFICATIONS
238(9-3/8")
270(10-5/8")
88(3-1/2")
9.5(3/8")
360(14-1/4")
263(10-11/32")
20(3/4")
30(1-3/16")
DIMENSIONS
Printed in Japan
WJ-JHND200C(2P-551)
DISTRIBUTED BY:
Trademarks and registered trademarks – Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
– SD logo is a trademark.
Important – Safety Precaution: carefully read the operating instructions and installation manual before using this product.
– Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network.
• All TV pictures/menu are simulated. • Weights and dimensions are approximate. • Specifications are subject to change without notice. • These products may be subject to export control regulations.
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010
PANASONIC PUERTO RICO INC.
DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA
San Gabriel Industrial Park, 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00985 (809) 750-4300
Panasonic System Solutions Company
Unit Company of Panasonic Corporation of North America
Security Systems
Website : www.panasonic.com/security
For Customer Support : call 1.877.733.3689
Executive Office : Three Panasonic Way 2H-2, Secaucus, New Jersey 07094
Unit : mm (inches)
Super Dynamic III
Network Color Dome Camera
WV-NS202
• Super Dynamic III
• MPEG-4/JPEG output
• SD Memory card slot
Network Color Dome Camera
WV-NF284
• MPEG-4/JPEG output
• SD Memory card slot
Mega Pixel
Color Network Camera
WV-NP1004
• MPEG-4/JPEG output
• 600 TV lines
• SD Memory card slot
Network Security
Color Camera
WV-NP244
• MPEG-4/JPEG output
• SD Memory card slot
Vandal Proof Network
Color Dome Camera
WV-NW474S
• Super Dynamic II
• Day/Night function
MPEG-4/JPEG Encoder
Network Interface Unit
WJ-NT304
• MPEG-4/JPEG output
• SD Memory card slot
Rack Mount Bracket
WV-Q200
Lens: optional Lens: optional