Panasonic WJ-DR2002 Operating Instructions
AV Disc Recorder
WJ-DR200
ENGLISHFRANÇAIS
Before attempting to connect or operate this product, please read these instructions carefully.
ENGLISH VERSION
CONTENTS
PREFACE ................................................................... 1
FEATURES ................................................................. 1
PRECAUTIONS .......................................................... 2
MAJOR OPERATING CONTROLS AND
THEIR FUNCTIONS ................................................... 3
■ Front View ............................................................ 3
■ Rear View ............................................................ 5
INSTALLATION AND SYSTEM CONNECTIONS ........ 7
INSTALLATIONS ..................................................... 7
SYSTEM CONNECTIONS ........................................ 8
SETUP PROCEDURES ............................................... 14
■ MAIN Menu ......................................................... 15
■ SET UP Menu ...................................................... 16
■ System Menu ....................................................... 16
■ Recording Mode Menu ....................................... 19
1. Multi Shot Recording Setup ................................ 21
2. Time Lapse Recording Menu ............................. 22
3. Manual Time Lapse Alarm Recording Menu ...... 24
4. Time Lapse Program Timer Setup ...................... 25
■ Alarm Recording Menu ....................................... 26
■ SEARCH/PLAY Menu .......................................... 28
■ System Information Menu .................................... 30
■ Label Setup ......................................................... 30
■ Password Setup .................................................. 31
OPERATING PROCEDURES ..................................... 34
FORMATTING THE DISC ........................................ 34
STATUS DISPLAY ................................................... 35
RECORDING ........................................................... 36
PLAYBACK ............................................................. 39
APPENDIX................................................................... 43
SPECIFICATIONS ...................................................... 47
ACCESSORY ............................................................. 48
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may
SA 1965
SA 1966
be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the appliance.
For U.S.A
Warning:
This equipment generates and uses radio frequency energy and if not installed and used properly, i.e., in strict
accordance with the instruction manual, may cause harmful
interference to radio communications. It has been tested
and found to comply with the limits for a Class A computing
device pursuant to Subpart J of Part 15 of FCC Rules,
which are designed to provide reasonable protection
against such interference when operated in a commercial
environment.
The serial number of this product may be found on the rear
of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No.
Serial No.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS
TURE.
PREF ACE
The WJ-DR200 AV Disc Recorder can record up to
28,000 freeze pictures with a resolution of 720 x 480
(Fine Mode) on a large capacity optical disc (DVDRAM).
It can be set up to respond automatically to a sensor or
alarm signal by recording the associated pictures.
FEATURES
ENGLISH
• Records clear freeze pictures
Applies 3D Scan Conversion to record blur-compensated, clear freeze pictures from moving
images. Vertical resolution is nearly double that of
conventional VCR pictures.
• Reliable recording of events
Obtain reliable records of important events by
selecting the recording mode best suited for your
purpose. There are three recording modes:
Single Shot Recording: Records a single freeze pic-
ture.
Multi Shot Recording: Records a continuous series
of freeze pictures.
Time Lapse Recording: Records freeze pictures at
regular intervals.
• Easy picture search
Three search modes for quick and easy picture
search.
List Search: Searches a list by recording date and
time.
Thumbnail Search: Searches displayed thumbnail
images of recorded pictures.
Direct Search: Searches by a recording date and
time or record number directly specified by the
user.
• Other handy recording functions
• Use the program timer function to preset the
recording time and mode for each day of the
week.
• Two video input channels for simultaneous
recording of images from two cameras.
• Connect two Disc Recorders in series for uninterrupted recording when the disc of one
recorder is full.
-1-
PRECAUTIONS
• Refer all work related to the installation of this
product to qualified service personnel or system
installers.
• Do not block the ventilation opening or slots on
the cover.
To prevent the appliance from overheating, place it
at least 5 cm (2 inches) away from the wall.
• Do not drop metallic parts through slots.
This could permanently damage the appliance. Turn
the power off immediately and contact qualified service personnel for service.
• Do not attempt to disassemble the appliance.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Contact
qualified service personnel for maintenance.
• Handle the appliance with care.
Do not strike or shake, as this may damage the
appliance.
• Fully charge up the backup battery.
Keep the appliance turned on for at least 48 hours
to recharge the backup battery. This procedure is
necessary when using the appliance for the first
time or after it has been unplugged for a long time
from the AC outlet. Insufficient charging of the battery may cause erasure of settings if the AC power
supply should fail. The battery, if fully charged, will
back up the settings for 480 hours in an ordinary
environment.
• Do not expose the appliance to water or moisture, nor try to operate it in wet areas.
Do take immediate action if the appliance becomes
wet. Turn the power off and refer servicing to qualified service personnel. Moisture may damage the
appliance and also cause electric shock.
• Do not use strong or abrasive detergents when
cleaning the appliance body.
Use a dry cloth to clean the appliance when it is
dirty.
When the dirt is hard to remove, use a mild detergent and wipe gently.
• Do not operate the appliance beyond its specified temperature, humidity or power source ratings.
Do not use the appliance in an extreme environment
where high temperature or high humidity exists.
Use the appliance at temperatures within +5°C +40°C (41°F - 104°F) and a humidity below 90 %.
The input power source for this appliance is 120 V
AC 60 Hz.
• We recommend that you note down your settings
and retain them. Power or battery failure may
erase settings you entered.
-2-
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
R A M
PUSH OPEN PUSH OPEN
AV Disc Recorder WJ-DR
REMOTE
OPERATE
ALARM
RESET
REC
DISC
ALARM
REC
DISC CONTROL
REMOTE
OPERATE
ALARM
RESET
REC
DISC
ALARM
REC
AV Disc Recorder WJ-DR
PUSH OPEN
PLAY MODE
1↔ ALL
DISC
KEEP COVER CLOSED
TO PREVENT INSIDE FROM DUST
BUSY
ARARM REC
STANDBY
INDDEX
FIND
SET UP/ESC
SET
PAUSE REC
PLAY
T/L MODE
–
FORMAT
+
PLAY BACK
SELECT
LOCK
OFF ON
STOP
OPEN/
CLOSE
CONTROL
PLAY MODE
1↔ ALL
ALARM REC
STANDBY
INDDEX
FIND
SET UP/ESC
SET
PAUSE REC
PLAY
T/L MODE
–
FORMAT
+
PLAY BACK
SELECT
LOCK
OFF ON
STOP
OPEN/
CLOSE
■ Front View
1. Operate indicator (OPERATE)
Is on (green) when the Disc Recorder’s power is
turned on.
2. Remote indicator (REMOTE)
Is on (orange) when the Disc Recorder is controlled
by an outboard device through the Serial Control
port (50).
3. Alarm Reset button (RESET)
Cancels an activated alarm and resets the system to
the condition prior to alarm activation.
4. Alarm indicator (ALARM)
Lights (red) for two seconds when an alarm is activated and then starts blinking.
Pressing the Alarm Reset button (3) will turn off the
indicator.
-3-
5. Alarm Recording indicator (ALARM REC)
Is on (green) when the Disc Recorder is in Alarm
Recording mode.
6. Recording indicator (REC)
Is on (red) when the Disc Recorder is recording,
and blinks when it is on standby for recording.
7. Disc indicator (DISC)
• Blinks/lights (red) when the recording capacity of
the DVD-RAM disc is running low.
(Blinks at 10% remaining space, blinks rapidly at
5%, and changes to steady light at 1%.)
• While overwriting in endless recording, continues to
turn on for two seconds and off for half a second.
0.2s
1.0s
0.2s
0.2s
1.0s
0.2s
0.2s
1.0s
8. Disc cover
Prevents dust from entering into the disc drive.
Press to open.
Do not open except to load or unload a disc.
13. Eject hole
For sliding out the disc tray manually (by inserting a
wire) if it is not ejected automatically when pressing
the OPEN/CLOSE button (35).
9. Ventilation holes
Allow air to enter the device to prevent it from overheating. Make sure not to block these holes.
10. Control Panel cover
Press to open for access to the control buttons on
the Control Panel.
11. Busy indicator (BUSY)
Is on (green) when a disc is loaded.
Is on (orange) when the disc drive is in operation.
It also indicates an error condition in the disc
recorder by blinking in green as follows:
• Blinks rapidly three times, followed by a 1-second interval.
<
An error has occurred on the disc in use. The
disc is about to reach the end of its life cycle
and should be replaced.
• Blinks rapidly twice, followed by a 1-second
interval.
21. Find button (FIND)
Press to directly specify and play back a frame*
22. Index button (INDEX)
Press to search the disc for a recorded frame.
23. Alarm Recording button (ALARM REC STANDBY)
Enables/disables alarm recording.
24. Reverse Record button ( )
Left button
Press to move the playback operation back one
step to the previous record*
1
.
In the setup operation, moves the cursor to the left
or select a parameter in reverse.
25. Reverse Frame button ( )
Down button
Press in paused playback to move the playback
operation back one step to the previous frame.
In the setup operation, moves the cursor down one
line.
26. Advance Frame button ( )
Up button
Press in paused playback to advance the playback
operation one step to the next frame.
In the setup operation, moves the cursor up one
line.
2
.
<
The unit’s lens or disc needs cleaning. See
page 46.
• Blinks once, followed by a 1-second interval.
<
Abnormal temperature rise inside the unit. Turn
the power off and refer servicing to qualified service personnel.
12. Shutter
For loading/unloading the disc. Pressing the
OPEN/CLOSE button (35) on the Control Panel with
the Disc Cover open will open the shutter and slide
out the tray.
27. Set button (SET)
In frame search, press to apply the entered value.
In the setup operation, press to execute a selection
and enter the submenu associated with the selected
item.
28. Advance Record button ( )
Right button
Press to advance the playback operation one step
to the next record.
In the setup operation, moves the cursor right or
select a parameter forward.
29. Pause button (yPAUSE)
Press to temporarily pause playback.
Holding down the Pause button and pressing the
REC button (31) will place the device into recording
standby status.
30. Reverse Playback button (AA)
Press to play back frames in the reverse order they
were recorded in. Holding the button down will
speed up reverse playback, releasing it will restore
the normal speed.
-4-
CAUTION
- FOR CONTINUED PROTECTION
Manufactured by Matushita Communication
Industrial Co. Ltd Yokohama Japan
- AFIN D' ASSURER UNE
ATTENTION
AGAINST FIRE HAZARD REPLACE ONLY WITH
SAME TYPE FUSE
PROTECTION PERMANENTE CONTRE LES RISQUES
D' INCENDIE REPLACER UNIQUEMENT PAR UN
FUSIBLE DE MEME TYPE
POWER 120V AC 60 Hz 38W
VIDEO OUT 1V [ p-p ] 75Ω
FOR COMMERCIAL USE ONLY
Made In Japan
SIGNAL GND
120V AC 60Hz
OFF
125V 4 A
POWER
ON
GND
SENSOR IN
ALARM IN
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
ALARM OUT
ALARM RECOVER OUT
ALARM REC
REC
DISC
BUZZER OUT
SYSTEM ERROR OUT
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
LED
MONITOR
CAMERA SW OUT
AUDIO
PARALELL CONTROL
SERIAL CONTROL
IN
OUT
S-VIDEO
OUT
S-VIDEO
VIDEO OUT
VIDEO IN
BA
SER.
NO.
6ZA00001
OUTPUT LEVEL
H
L
31. Recording button (REC)
Pressing the REC button will start recording in the
previously defined mode.
32. Playback button (BB)
Pressing the (BB) button will start playback. Holding
the button down will speed up playback, releasing it
will restore the normal speed.
33. Lock switch (LOCK OFF/ON)
In ON position, locks out control of the Disc
Recorder from the Control Panel and Parallel Control
port (49).
Keep normally in OFF position.
34. Stop button (STOP)
Pressing the STOP button will terminate all modes of
operation, such as recording, playback and setup.
35. Open/Close button (OPEN/CLOSE)
Press to slide the disc tray out or in for loading or
unloading a disc.
Disabled while the Disc Cover (8) is closed.
36. Increment button (DD+)
Pressing the (DD+) button in playback will decrease
the playback speed.
Pressing it in paused playback will increment the
playback channel (or camera ID). To play back the
selected channel, press the PLAY BACK SELECT
button (38).
37. Decrement button (CC–)
Pressing the (CC–) button in playback will increase
the playback speed.
Pressing it in paused playback will decrement the
playback channel (or camera ID). To play back the
selected channel, press the PLAY BACK SELECT
button (38).
38. Playback Select button (PLAY BACK SELECT)
Pressing the PLAY BACK SELECT button after
selecting the input channel with the (DD+) (36) or
(CC–) (37) button will start playback of the respective
channel.
39. Setup/Escape button (SET UP/ESC)
Used in the Disc Recorder’s setup operation.
Pressing the button for about two seconds will
establish Setup mode and display the Setup menu
window. Pressing it in a menu will return you to the
previous menu window.
To terminate setup, press again for about two seconds.
■ Rear View
41. Looped Through Output B connector (B, OUT)
The NTSC composite video signal B connected to
VIDEO IN B (42) is looped through to this connector.
Provided with automatic 75 Ω termination.
42. Video Input B connector (VIDEO IN, B)
For input of the NTSC composite video signal from
an outboard device.
43. Looped Through Output A connector (A, OUT)
The NTSC composite video signal A connected to
VIDEO IN A (44) is looped through to this connector.
Provided with automatic 75 Ω termination.
44. Video Input A connector (VIDEO IN, A)
For input of the NTSC composite video signal from
an outboard device.
-5-
45. S-Video Input connector (VIDEO IN, S-VIDEO)
For input of the S-video signal from an outboard
device.
46. Video Output connector (VIDEO OUT)
Outputs the selected composite video signal for the
monitor.
The A input images are displayed during recording,
except when A and B inputs are recorded at a capture rate of one second or more.
47. S-Video Output connector (VIDEO OUT, SVIDEO)
Outputs the selected S- video signal for the monitor.
The A input images are displayed during recording,
except when A and B inputs are recorded at a capture rate of one second or more.
Alarm
Output
Alarm
Recover
Output
HL
12 V
0 V
5 V
0 V
5 V
0 V
5 V
0 V
48. Audio Output/Input connectors (AUDIO OUT/IN)
Provided for recording and playback of audio signals.
49. Parallel Control port (PARALLEL CONTROL)
For connecting an outboard device used to remote
control the Disc Recorder.
50. Serial Control port (SERIAL CONTROL)
For connecting a Personal Computer and the like to
remote control the Disc Recorder.
51. Camera Switching Output connector (CAMERA
SW OUT)
Outputs a pulse after each recorded frame.
52. Terminal Board
For connecting output and input signals to and from
outboard devices.
53. Alarm Output Level selector (OUTPUT LEVEL
H/L)
Switches the output level of the ALARM OUT and
ALARM RECOVER terminals on the Terminal Board
(52).
The factory default is L.
54. Cooling fan
Prevents temperature rise inside the unit.
55. AC socket
For connecting the supplied power cord.
56. Power switch (POWER ON/OFF)
Turns the power of the Disc Recorder on and off.
1
*
: A “record” is a batch of freeze pictures (frames)
recorded in one recording session.
2
*
: One recorded freeze picture is called a “frame”.
-6-
INSTALLATION AND SYSTEM CONNECTIONS
O
P
E
R
A
T
E
O
P
ER
AT
E
INSTALLATIONS
The installations described below should be made by qualified service personnel or system installers.
■ Mounting in the Rack
1. Remove the four rubber feet by removing the four
screws from the bottom of the Disc Recorder.
TE
A
R
PE
O
Remove four rubber feet.
2. Place the rack mounting brackets on both sides of
the Disc Recorder and tighten them with the four
supplied screws (M4 X 10).
3. Install the Disc Recorder with the rack mounting
brackets in the rack by using four screws (not
included).
Cautions:
• Do not block the ventilation opening or slots in
the cover to prevent the appliance from overheating.
Always keep the temperature in the rack within
+40°C (104°F).
• Secure the rear of the appliance to the rack by
using additional mounting brackets (procured
locally) if the rack is subject to vibration.
-7-
SYSTEM CONNECTIONS
■ Basic System
Shown below is a typical connection scenario.
Camera
(VIDEO OUT)
Video Monitor
(VIDEO IN)
WJ-DR200
OUT
VIDEO IN
BA
S-VIDEO
VIDEO OUT
S-VIDEO
POWER 120V AC 60 Hz 38W
VIDEO OUT 1V [ p-p ] 75Ω
Manufactured by Matushita Communication
Industrial Co. Ltd Yokohama Japan
FOR COMMERCIAL USE ONLY
Made In Japan
PARALELL CONTROL
AUDIO
OUT
IN
SERIAL CONTROL
SER.
NO.
6ZA00001
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
SENSOR IN
ALARM IN
GND
CAMERA SW OUT
LED
MONITOR
ALARM RECOVER OUT
ALARM OUT
ALARM REC
REC
OUTPUT LEVEL
H
L
DISC
BUZZER OUT
SYSTEM ERROR OUT
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
SIGNAL GND
- FOR CONTINUED PROTECTION
CAUTION
AGAINST FIRE HAZARD REPLACE ONLY WITH
SAME TYPE FUSE
ATTENTION
- AFIN D' ASSURER UNE
PROTECTION PERMANENTE CONTRE LES RISQUES
D' INCENDIE REPLACER UNIQUEMENT PAR UN
FUSIBLE DE MEME TYPE
125V 4 A
120V AC 60Hz
POWER
ON
OFF
(Alarm)(Sensor)
Cautions:
Noise may appear in the monitor image and the audio may be interrupted under the following circumstances:
• Faulty camera synchronization, causing large frequency deviations between individual cameras
• Picture experiencing abrupt changes in brightness
• Faulty timing in switching input and recording of video signals (for example, a sequential switcher is not used for the
camera switching output of the disc recorder, or switching is out of synchronization due to an alarm condition)
Requirements for alarm and sensor input are as follows:
• Open collector output or no-voltage make contact
• The voltage between Ground and Alarm Input or Sensor Input when the circuit closes must be 0 to 0.2 V. The polarities
can be changed by setting the SIGNAL TYPE parameter in the Alarm Recording menu.
Notes:
• Recording of freeze pictures from VCR playback is not provided as a function. Recording is possible, but the results
may not be satisfactory depending on the type of VCR used.
• When the Disc Recorder is connected to several cameras, for example through a multiplexer, all camera inputs must be
synchronized to obtain proper images.
Refer all connection work to qualified service personnel or system installers.
• If you use the WJ-DR200 AV Disc Recorder with a Sequential Switcher that is connected to non-synchronized cameras
(*1) and switches their video output sequentially (*2), recording with the following capture rates is not available:
720
480 mode 0.07 sec.
*
720
240 mode 0.03 sec.
*
*1: Including cameras with VD (Vertical Drive) synchronization.
*2: Without using the camera switching pulse supplied by the WJ-DR200.
■ Connection with Video Multiplexer
Example: Connection with Video Multiplexer WJ-FS616
Note: Refer connection with a Video Multiplexer other than the WJ-FS616 to qualified service personnel or system installers.
● WJ-DR200 System Setup
WJ-DR200 Setup Menu
VIDEO INPUT
MULTI SHOT (MODE *)
TIME LAPSE (MODE *)
MANUAL REC ALARM
SERIAL SETUP
VIDEO INPUT
CAMERA INPUT
CAPTURE RATE
SIGNAL TYPE
Item
Parameter
COMPOSITE *1
COMPOSITE
S *1 COMPOSITE
A (CAMERA ID ON)
0.1 sec. or more
RS-232C (VCR mode) *3
A (CAMERA ID OFF)
0.20 sec.
RS-232C
-8-
Default Setting
WJ-DR200
H
L
SER.
6ZA00001
NO.
Made In Japan
PARALELL CONTROL
SERIAL CONTROL
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
ALARM OUT
SENSOR IN
ALARM IN
GND
OUTPUT LEVEL
CAMERA SW OUT
ALARM RECOVER OUT
H
L
OUT
VIDEO IN
BA
S-VIDEO
VIDEO OUT
S-VIDEO
POWER 120V AC 60 Hz 38W
VIDEO OUT 1V [ p-p ] 75Ω
Manufactured by Matushita Communication
Industrial Co. Ltd Yokohama Japan
FOR COMMERCIAL USE ONLY
AUDIO
OUT
IN
WJ-FS616
LINE
RS485 TERM.
OFF ON 2 4
A BTA B
G
G
N
N
R
D
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CAMERA
IN
CAMERA
OUT
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
D
SELECT
CAMERA
SW IN
GENLOCK
IN (VS)
SPOT
OUT I N
VIDEO S
LED
MONITOR
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
ALARM REC
REC
DISC
BUZZER OUT
SYSTEM ERROR OUT
SIGNAL GND
REC OUT PLAY IN
–
VIDEO S–VIDEO S–VIDEOVIDEOVIDEO
MULTISCREEN
ALARM/REMOTE
DATA
INOUT
- FOR CONTINUED PROTECTION
CAUTION
AGAINST FIRE HAZARD REPLACE ONLY WITH
SAME TYPE FUSE
ATTENTION
- AFIN D' ASSURER UNE
PROTECTION PERMANENTE CONTRE LES RISQUES
D' INCENDIE REPLACER UNIQUEMENT PAR UN
FUSIBLE DE MEME TYPE
125V 4 A
120V AC 60Hz
VCR CONTROL
RS–232C
REMOTE
OUT
TERM.
ON
OFF
SIGNAL
GND
POWER
ON
OFF
Alarm
Output Level
Selector
OUTPUT LEVEL
BNC Connector
Pin Plug
SW1: Recording
Output
SW1
OFF
H
● WJ-FS616 System Setup
DefaultWJ-FS616 Setup Menu
SYSTEM SETUP 2/2
WJ-FS616 SETUP MENU
REC MODE SETUP
SYSTEM SETUP 1/2
ALARM SETUP
SYSTEM SETUP 2/2
Item
VCR IN SELECT
REC/MULTI 2
SEQ TIMING-MLT
ALM SCHEDULE
ALM OUTPUT DUR
DYNAMIC REC
ALM REC MODE
RS-232C MODE
VIDEO *1
S-VIDEO *1 VIDEO
REC OUTPUT
MODE 9 (EXT1 or EXT4) *3 MODE 0
INT (TIME-AJD)
ON OFF
EXT *5
ON *4 OFF
MODE 9 MODE 0
VCR *2 VCR
Parameter
VIDEO
REC OUTPUT
INT (TIME-ADJ)
2 SEC
*1. Select VIDEO or S-VIDEO according to the connection.
VIDEO: Select this parameter when the BNC connector is used for the connection.
S-VIDEO: Select this parameter when the S- VIDEO connector is used for the connection.
Monitoring the playback picture from the MULTISCREEN OUT connector or the SPOT connector is not available.
*2. Connect only when WJ-DR200 is controlled by Video Multiplexer WJ-FS616. (Refer connection of the cable to qualified
service personnel or system installers.)
You need to set the communication parameters (DATA BIT, PARITY, etc.) on both the WJ-DR200 and the WJ-FS616.
*3. This value applies to EXT 1. For EXT 4, set the parameter to 0.20 sec. or more.
*4. Set this parameter to change the recording rate automatically when an alarm signal is received.
*5. Set the recording time when alarm time lapse recording is required.
-9-
■ Terminal Board
GND
SENSOR IN
ALARM IN
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
ALARM OUT
ALARM RECOVER OUT
ALARM REC
REC
DISC
BUZZER OUT
SYSTEM ERROR OUT
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
LED
MONITOR
The Terminal Board has the following functions. Make
connections to these terminals as needed for operating
your system. GND terminal is common ground for all
terminals.
● Input Terminals
SENSOR IN: Connects the input signal to start
recording in Alarm Recording mode.
(In Time Lapse mode, recording is enabled
while this signal is input.)
The ALARM indicator on the front panel of the
Disc Recorder does not light in response to this
recording input.
(Any alarm output functions are disabled.)
ALARM IN: Connects the input signal to start
recording in Alarm Recording mode.
(In Time Lapse mode, recording is enabled
while this signal is input.)
The Alarm indicator on the front panel of the
Disc Recorder lights in response to this recording input. The buzzer sounds if the buzzer function was selected in the Setup menu.
ALARM RESET IN: Connects the alarm and/or
buzzer reset input when an alarm has been activated.
SERIES REC IN: Connects an input signal to
enable recording on two series-connected Disc
Recorders.
TIME ADJUST IN: Connects a time adjust input
from an external source to synchronize the Disc
Recorder’s internal clock. When this input is
detected, the time is adjusted to an accuracy of
±30 seconds.
DISC: Sends a signal when DVD-RAM disc space is
running low. The signal’s output parameters
can be changed from the Setup menu.
BUZZER OUT: Outputs a buzzer signal interlocked
with the Disc Recorder’s buzzer.
SYSTEM ERROR OUT: Outputs an error signal
when a fatal system error occurs in the Disc
Recorder.
THERMAL ERROR OUT: Outputs a signal when a
temperature rise is detected in the Disc
Recorder.
TIME ADJUST OUT: Sends a time adjust signal
used to slave the internal clocks of connected
equipment to that of the Disc Recorder. Output
as a 1-second pulse every day at 9:00 AM.
SERIES REC OUT: Outputs a signal that enables
recording on two series-connected Disc
Recorders.
● Output Terminals
ALARM OUT: Sends an alarm signal in response to
an alarm input.
ALARM RECOVER OUT: Sends an alarm recover
signal in response to the alarm reset signal
received when the ALARM RESET button is
pressed, or when recording in Alarm Recording
mode is terminated.
ALARM REC: Outputs an alarm recording signal
while the Disc Recorder is operated in Alarm
Recording mode.
REC: Outputs an image recording signal while the
Disc Recorder is recording pictures. The signal
is interlocked with lighting of the REC indicator
on the Disc Recorder’s front panel.
-10-
■ External Remote Control
13 12 11 10 9 8
76 5 4 3 2 1
25 24 23 22 21 20 19 18 17
16 15
14
1
2
3
4
5
6
7
8
9
10
11
12
13
Ground
Ground
ALARM REC STANDBY
UP
STOP
SET UP/ESC
LOCK
INDEX
LEFT
SET
PLAY
RIGHT
PAUSE
Pin No. Designation
14
15
16
17
18
19
20
21
22
23
24
25
FIND
REC
FORMAT –
DOWN
OPEN/CLOSE
FORMAT +
PLAY BACK SELECT
Not Used
REVERSE PLAY
ALARM RESET
Not Used
Ground
Pin No. Designation
● Parallel Control Port
Connect an external remote control switch to the PARALLEL CONTROL port on the rear of the Disc Recorder as shown
below. This enables remote control of the Disc Recorder in the same way as with the control buttons on the recorder’s
front panel.
-11-
● Serial Control Port
1
2
3
4
5
6
7
8
12
17
18
20
23
FG
TxD
RxD
RTS
CTS
DSR
SG
DCD
T(B)
R(B)
R(A)
DTR
T(A)
Frame Ground
Transmit Data
Receive Data
Request to Send
Clear to Send
Data Set Ready
Signal Ground
Data Carrier Detect
Transmit Data (RS-485)
Receive Data (RS-485)
Receive Data (RS-485)
Data Terminal Ready
Transmit Data (RS-485)
Pin No. Designation
–
out
in
out
in
in
–
in
out
in
in
out
out
INPUT/OUTPUT Function
1
14
13
25
Connect a personal computer to the SERIAL CONTROL port on the rear of the Disc Recorder. This port conforms both
with the RS-232C and RS-485 standard and permits remote control of the Disc Recorder or storing of video data to a
personal computer.
-12-
WJ-DR200 MASTER Recorder SLAVE RecorderWJ-DR200
GND
SENSOR IN
ALARM IN
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
ALARM OUT
ALARM RECOVER OUT
ALARM REC
REC
DISC
BUZZER OUT
SYSTEM ERROR OUT
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
LED
MONITOR
GND
SENSOR IN
ALARM IN
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
ALARM OUT
ALARM RECOVER OUT
ALARM REC
REC
DISC
BUZZER OUT
SYSTEM ERROR OUT
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
LED
MONITOR
Connection for Alternate Time Lapse Recording
■ Series Recording Connection
WJ-DR200 MASTER Recorder SLAVE RecorderWJ-DR200
GND
SENSOR IN
ALARM IN
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
ALARM OUT
ALARM RECOVER OUT
ALARM REC
REC
DISC
BUZZER OUT
SYSTEM ERROR OUT
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
LED
MONITOR
GND
SENSOR IN
ALARM IN
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
ALARM OUT
ALARM RECOVER OUT
ALARM REC
REC
DISC
BUZZER OUT
SYSTEM ERROR OUT
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
LED
MONITOR
The WJ-DR200 can be set up for automatic serial recording by connecting a second recorder to its Terminal Board.
● Series Recording 1 (Alternate Alarm Recording)
Connect the terminals on the Terminal Boards of the MASTER and SLAVE recorder as shown below.
Connect the required video and audio input to both recorders.
This will enable recording alarms alternately on the MASTER and on the SLAVE recorder. When there is no more
recording space on the disc of the MASTER recorder, alarm recording switches to the SLAVE recorder.
● Series Recording 2
(Alternate Time Lapse Recording)
Connect the terminals on the Terminal Boards of the MASTER and SLAVE Recorder as shown below.
When there is no more recording space on the disc of the MASTER recorder, time lapse recording switches to the
SLAVE recorder. For uninterrupted recording, the disc of the MASTER recorder can be exchanged while recording is
switched to the SLAVE recorder.
(Up to 16 recorders including the MASTER recorder can be connected to record sequentially.)
(Auxiliary Alarm Recording)
An auxiliary record is made on the SLAVE recorder when a second alarm signal is received while the MASTER recorder
is recording. This function is not available while the MASTER recorder is in an operating mode other than Alarm
Recording (playback, search, etc.).
Connect the required video and audio input to both recorders.
For sensor input, connect the SENSOR IN instead of the ALARM IN terminals.
-13-
SETUP PROCEDURES
MAIN
SET UP DISABLE
SYSTEM *
REC MODE MODE1 *
MODE2 *
ALARM RECORD *
SEARCH/PLAY *
SYSTEM INFO *
Panasonic AV Disc Recorder V1.0R00
PLAY MODE
1↔ ALL
SET UP/ESC
SET
–
FORMAT
+
PLAY BACK
SELECT
T/L MODE
The Setup Menu provides a way for controlling functions
not available through direct input.
● Displaying the SETUP MENU
1. Confirm that the camera and peripherals are connected correctly and securely.
2. Turn on the power switches of all system components.
3. Press the SET UP/ESC button of the Disc Recorder
for about 2 seconds or more.
The MAIN menu appears on the monitor screen as
shown below.
• The following buttons are valid in the setup menu:
UP : Moves the cursor upward.
DOWN : Moves the cursor downward.
LEFT : Moves the cursor to the left, or
selects the mode or parameter.
RIGHT : Moves the cursor to the right, or
selects the mode or parameter.
SET: Executes the selections and dis-
plays a submenu for an item with the
(*) mark.
SET UP/ESC: Executes the currently selected set-
ting and returns to the previous
setup menu.
(–): Selects the next mode or parameter.
(+): Selects the previous mode or para-
meter.
• In the MAIN menu, press the SET UP/ESC button
for about 2 seconds to apply the setting and exit the
setup mode.
Note: If alarm is activated during the setup opera-
tion, the setup menu disappears and the display
returns to the normal picture. Any settings previously made take effect, even if the SET UP/ESC
button was not pressed.
-14-
Loading...