Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance.
English
TQB0E0815U
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
2
Notice for DVB functions
Any functions related to DVB (Digital Video Broadcasting) will work in areas where ●
DVB-T (MPEG2 and MPEG4-AVC(H.264)) digital terrestrial broadcasting are
received, where DVB-C (MPEG2 and MPEG4-AVC
are supplied or where DVB-S (MPEG2 and MPEG4-AVC
broadcasting are received.
Consult your local dealer with coverage areas or your cable provider to access.
●
DVB functions may not be available in some countries or areas.
Some functions may not be available in some countries or areas.●
Some functions may not be available with some cable provider.●
Some functions may not be available with some satellites.●
This TV has the capability for DVB specifications. But future DVB services cannot ●
be guaranteed.
How to Use Menu Functions
(picture, sound quality, etc.)
Quick Start Guide
ViewingAdvancedFAQs, etc.
This product is licensed under the AVC patent portfolio
license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC
Standard (“AVC Video”) and/or (ii) decode AVC Video that
was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video
provider licensed to provide AVC Video. No license is
granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
Up to 60,000 hours LCD Panel Lifetime
The LCD display panel used in the 2009 VIERA TV range is
rated for up to 60,000 hours.
∗
This measurement is based on the time taken for the brightness of the
panel to reduce to half of it’s maximum level.
The time taken to reach this level may vary depending on the image
content and the environment where the TV is used.
Malfunctions are not taken into account.
∗
Advanced Features
Retuning from Setup Menu● ····························· 32
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause ●
fire.)
Ensure that the mains plug is easily accessible.●
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)●
Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)●
Do not move the TV with the lead plugged in the socket outlet.●
Do not place a heavy object on the lead or place the lead near a high-temperature object.●
Do not twist the lead, bend it excessively, or stretch it.●
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.●
Do not use a damaged mains plug or socket outlet.●
If you find any
abnormality,
remove the mains plug
immediately!
AC 220-240 V
50 / 60 Hz
Power source
This TV is designed to operate on 220-240 V, ●
50 / 60 Hz AC.
Do not remove covers
NEVER modify the TV yourself
(High-voltage components may cause serious
electrical shock.)
Have the TV checked, adjusted, or repaired at your ●
local Panasonic dealer.
Keep liquids away from the TV
To prevent damage which may result in fire or shock ●
hazard, do not expose this appliance to dripping or
splashing.
Do not place containers with water (flower vase, ●
cups, cosmetics, etc.) above the TV. (including on
shelves above, etc.)
Do not place foreign objects
inside the TV
Do not allow any objects to drop into the TV through ●
the air vents (fire or electrical shock may result).
Do not place the TV on sloped
or unstable surfaces
The TV may fall off or tip over.●
Use only the dedicated
pedestals / mounting equipment
Using an unapproved pedestal or other fixtures may ●
make the TV unstable, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use approved pedestals / mounts (p. 6).●
4
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the TV to direct sunlight and other ●
sources of heat. To prevent fire never place any type
of candle or naked flame on top or near the TV.
Do not allow children to handle
SD Card
As with a small object, SD Card can be swallowed ●
by young children. Please remove SD Card
immediately after use.
Notes
Caution
When cleaning the TV, remove the mains ■
plug
Cleaning an energized TV may cause electrical shock.●
When the TV is not going to be used for ■
a long period of time, remove the mains
plug
This TV will still consume some power even in the Off ●
mode, as long as the mains plug is still connected to a
live socket outlet.
Allow sufficient space around the TV for ■
radiated heat
Minimum distance
10
10
When using the pedestal, keep the space between the ●
bottom of the TV and the surface where the TV is set.
In case of using Wall-hanging bracket, follow the ●
manual of it.
Do not block the rear air vents■
Blocked ventilation by newspapers, table cloths, ●
curtains, etc. may cause overheating, fire or electrical
shock.
Do not expose your ears to excessive ■
volume from the headphones
Irreversible damage can be caused.●
1010
(cm)
Auto power standby function■
If no signal is received and no operation is ●
performed in Analogue TV mode for 30 minutes,
the TV will automatically go to standby mode.
Keep the TV away from these types ■
of equipment
Electronic equipment●
In particular, do not place video equipment near
the TV (electromagnetic interference may distort
images / sound).
Equipment with an infrared sensor●
This TV also emits infrared rays (this may affect
operation of other equipment).
Transport only in upright position■
Maintenance
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent (1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is
dry.
Caution
The surface of the display panel has been specially treated and may be easily damaged.●
Do not tap or scratch the surface with your fingernail or other hard object.
Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances (this may
●
degrade surface quality).
Cabinet, Pedestal
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
Take care not to subject the TV’s surfaces to detergent (a liquid inside the TV could lead to product failure).●
Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances (this may ●
deteriorate the surface by peeling the paint).
Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.●
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)
5
Accessories / Options
Standard accessories Check that you have the accessories and items shown
Remote Control□
N2QAYB000353●
abc def
jkl
ghi
mno
tuvpqrs
wxyz
Operating Instructions□
Pan European Guarantee Card□
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by ●
young children accidentally. Keep these parts out of reach of young children.
Batteries for the □
Remote Control (2)
R6 (UM3)●
Ferrite core□
p. 10
Cleaning cloth□
Optional accessories
Wall-hanging bracket
TY-WK3L1RW●
Please contact your nearest Panasonic dealer to purchase
the recommended wall-hanging bracket. For additional details,
please refer to the wall-hanging bracket installation manual.
Rear of the TV
Holes for wall-hanging
bracket installation
400 mm
200 mm
To remove the Pedestal
Remove five screws.
WARNING!
Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the ●
consumer. Any damage resulting from not having a professional installer mount your unit will void your
warranty.
Always be sure to ask a qualified technician to carry out set-up.●
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) which ●
typically give off high heat. Doing so may warp or damage plastic cabinet parts.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in ●
the wall before hanging bracket.
To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.●
6
1
Installing / removing remote’s batteries
Pull
open
2
Close
Hook
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.●
Do not mix old and new batteries.●
Do not mix different battery types (such as alkaline and manganese batteries).●
Do not use rechargeable (Ni-Cd) batteries.●
Do not burn or breakup batteries.●
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
Note the correct
polarity (+ or -)
Using the clamper
Release the mains lead from the clamper and use to bundle the cables.
Rear of the TV
Attach the clamper■
hole
Quick Start Guide
Accessories / Options●
To remove from the TV:
snaps
Insert the clamper
in a hole
Bundle the cables■
Anti-scratch sheet
You can remove this sheet as necessary.
●
Remove the clamper from the TV to
remove this sheet.
Do not bundle the Satellite cable and mains lead together (could cause distorted image).
●
Fix cables with clampers as necessary.●
When using the optional accessory, follow the option’s assembly manual to fix cables.●
hooks
Set the
tip in the
hooks
To loosen:
knob
Keep
pushing both
side snaps
Keep
pushing
the knob
7
Accessories / Options
Adjust the panel to your desired angle
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.●
Do not place any objects or hands within the full rotation range.●
Set the mark at the centre as illustrated, to
ensure full degree rotation in either direction.
TX-L32V10E
●
a: 359 mm / b: 230 mm
TX-L37V10E●
a: 399 mm / b: 296 mm
b
15°15°
a
(View from the top)
Identifying Controls
TV
SD Card slot
(p. 58)
SD CARD
Headphones
jack
(p. 71)
Recording LED
Standby for Direct TV Recording: orange●
Power LED
Standby: red●
On: green
When using the remote control, indicates the TV has received a command.
●
Mains power On / Off switch
Switch On to turn on the TV or turn the TV ●
to standby mode by the remote control
Increases or decreases the channel
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When
in Standby mode, switches TV On.
Senses brightness to adjust picture quality when “Eco Mode” in the Picture Menu ●
is set to “On” (p. 26)
Remote control signal receiver
Do not place any objects between the TV remote control signal receiver ●
and remote control.
Identifying Controls
Remote Control
VIERA IMAGE VIEWER (p. 58)
Switches to SD Card viewing mode
●
Standby On / Off switch
Switches TV On or Off standby●
Aspect (p. 16)
Changes aspect ratio from Aspect Selection
●
list
Also possible by pressing this button
●
repeatedly until you reach the desired aspect
Main Menu (p. 24)
Press to access Picture, Sound and
●
Setup Menus
Channel / Programme Information
Displays channel and programme
●
information
(p. 15)
VIERA Link Menu (p. 66)
Accesses VIERA Link Menu
●
OK
Confirms selections and choices●
Press after selecting channel positions ●
to quickly change channel
Option Menu (p. 17)
Easy setting for viewing and
●
sound options
ASPECT
k
n
i
L
A
R
E
I
V
OPTION
TEXT
MENU
R
E
I
V
STTL
INPUT
DIRECT TV REC
T
O
A
O
L
S
INDEX HOLD
AVTV
EXIT
G
U
I
D
E
BACK/
RETURN
Input mode selection
TV - switches DVB-S / DVB-C / DVB-T / ●
Analogue mode (p. 14)
AV - switches to AV input mode from Input
●
Selection list (p. 22)
Direct TV Recording (p. 64 and p. 66)
Records programme immediately in
●
DVD Recorder / VCR with Q-Link or
VIERA Link connection
VIERA CAST (p. 57)
Displays VIERA CAST home screen
●
Exit
Returns to the normal viewing screen●
VIERA TOOLS (p. 49)
Displays some special feature icons and
●
accesses easily
Guide (p. 18)
Displays TV Guide
●
Cursor buttons
Makes selections and adjustments●
Return
Returns to the previous menu / page●
Quick Start Guide
Identifying Controls●
Accessories / Options●
Coloured buttons
Used for the selection, navigation and ●
operation of various functions
Teletext (p. 20)
Switches to teletext mode
●
Subtitles (p. 16)
Displays subtitles
●
Numeric buttons
Changes channel and teletext pages●
Sets characters●
When in Standby mode, switches TV On●
Sound Mute
Switches sound mute On or Off●
Volume Up / Down
ghi
abcdef
jkl
tuvpqrs
REC
TV
mno
wxyz
PROGRAMME
DVD/VCR
TV
Hold
Freeze / unfreeze picture (p. 15)●
Holds the current teletext page (teletext ●
mode) (p. 20)
Index (p. 21)
Returns to the teletext index page
●
(teletext mode)
Surround (p. 27)
Switches Surround sound
●
Channel Up / Down
Selects channel in sequence●
Connected equipment operations
(p. 23 and p. 68)
9
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Example 1
Connecting dish or aerial
TV only
Rear of the TV
Satellite
dish
Satellite cable
For digital satellite ●
broadcasts
AC 220-240 V
50 / 60 Hz
Mains lead
RL
RL
PRPBY
AV
1
AV
2
COMPONENT
AUDIO
RGB
VIDEO
RGB
VIDEO
IN
S VIDEO
AUDIO
OUT
HDMI 1
HDMI 3HDMI 2
DIGITAL
AUDIO OUT
PC
Ferrite core (supplied)
Installing the Ferrite core
Pull back the
tabs
(in two places)
Less than
10 cm
Put the RF cable
Open
Press the cable
through and
close
Terrestrial
aerial
Cable
RF cable
For digital cable, digital terrestrial
●
and analogue broadcasts
10
Selectable satellites and dish alignment to tune DVB-S channels:■
Turksat at 42° East•
Hellas at 39° East•
Astra at 28.2° East•
Arabsat at 26° East•
Astra at 23.5° East•
Astra at 19.2° East•
To ensure your satellite dish is correctly installed, please consult your local dealer.●
Also please consult the received satellite broadcasting companies for details.●
Note
Keep the space between the TV and RF cable to prevent distorted image.●
Connect to the TV’s AV1 / AV2 for a DVD Recorder / VCR supporting Q-Link (p. 64).●
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by ●
using HDMI cable (p. 70).
Network connection ● p. 51
Q-Link connection ● p. 62
VIERA Link connection ● p. 62 and p. 63
Read the manual of the equipment too.●
Eutelsat at 16° East•
Hot Bird at 13° East•
Eutelsat at 10° East•
Eurobird at 9° East•
Eutelsat at 7° East•
Sirius at 5° East•
Intelsat at 1° West•
Amos at 4° West•
Atl. Bird at 5° West•
Atl. Bird at 7° West•
Atl. Bird at 8° West•
Hispasat at 30° West•
Example 2
Connecting DVD Recorder / VCR
TV, DVD Recorder or VCR
Rear of the TV
Example 3
Connecting DVD Recorder / VCR
and Set top box
TV, DVD Recorder / VCR and Set top box
Rear of the TV
Quick Start Guide
AC 220-240 V
50 / 60 Hz
Mains lead
RL
RL
PRPBY
AV
1
AV
2
COMPONENT
AUDIO
RGB
VIDEO
RGB
VIDEO
IN
S VIDEO
AUDIO
OUT
HDMI 1
HDMI 3HDMI 2
DIGITAL
AUDIO OUT
PC
Cable
Terrestrial
aerial
AC 220-240 V
50 / 60 Hz
Mains lead
RL
RL
PRPBY
AV
1
AV
2
COMPONENT
AUDIO
RGB
VIDEO
RGB
VIDEO
IN
S VIDEO
AUDIO
OUT
HDMI 1
HDMI 3HDMI 2
DIGITAL
AUDIO OUT
PC
Terrestrial
aerial
Basic Connection●
DVD Recorder
or VCR
Fully wired
SCART cable
RF OUT
RF IN
RF cable
RF cable
Ferrite core
(supplied)
Fully wired
HDMI
compliant
cable
Set top box
Fully wired
SCART cable
Cable
Fully wired
SCART cable
DVD Recorder
RF OUT
RF IN
Ferrite core
(supplied)
or VCR
RF cable
RF cable
11
Auto Setup
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.●
Please complete connections (p. 10 and p. 11) and settings (if necessary) of the connected equipment before ●
starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
Select the language
Menüsprache
Deutsch
English
Français
Italiano
Español
Português
Nederlands
Dansk
Svenska
Norsk
Suomi
Türkçe
Еλληνικά
Polski
čeština
Magyar
Slovenčina
Български
Românǎ
Srpski
Hrvatski
Slovenščina
Latviešu
eesti keel
Lietuvių
Select your country
Country
Germany
Austria
France
Italy
Spain
Portugal
Switzerland
Malta
AndorraGreece
Denmark
Sweden
Norway
Finland
Luxembourg
Belgium
Netherlands
Turkey
Hungary
Slovakia
Slovenia
Lithuania
Poland
Czech
Estonia
E.Eu
select
set
select
set
ASPECT
OPTION
MENU
R
E
I
V
INPUT
N
T
O
A
O
L
AVTV
DIRECT TV REC
EXIT
S
G
U
I
D
E
BACK/
RETURN
1
2
3
TEXT
STTL
REC
TV
INDEX HOLD
PROGRAMME
DVD/VCR
TV
4
Auto Setup starts
Sending Preset Data
Please wait!
0%100%
Remote control unavailable
Select “Home”
Please select your viewing environment.
HomeShop
Auto Setup will start to search for TV ●
channels and store them.
The sorted channel order depends upon
the TV signal, the broadcasting system and
reception conditions.
If Q-Link, VIERA Link or similar technology ●
(p. 64) compatible recorder is connected,
channel, language, country / region
settings are automatically downloaded to
the recorder.
If downloading has failed, you can ●
download later by the menu item.
“Download” (p. 28)
select
set
12
Auto Setup is now complete and your TV is ready for viewing.
To check channel list at-a-glance●
“Using TV Guide” (p. 18 and p. 19)
To edit channels●
“Tuning and Editing Channels”
(p. 36 - 41)
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
How to use remote control
■
Move the cursor / select the menu item
Access the menu / store settings after
adjustments have been made or options
RETURN
Move the cursor / adjust levels / select from
a range of options
BACK/
Return to the previous menu
have been set
MENU
Open the main menu
EXIT
Exit the menu system and return to the
normal viewing screen
ON SCREEN HELP Instructions box - Operation guide■
(example: Sound Menu)
Sound Menu1/2
ModeMusic
Bass
Treble
Balance
Headphone Volume
SurroundOff
Volume Correction
Speaker Distance to Wall
MPXStereo
Select
EXIT
Change
RETURN
Over 30cm
Stereo
Page up
Page down
0
0
0
11
0
Operation guide will help you.
Note
If tuning has failed ● “Auto Setup” (p. 32 - 35)
To initialize all settings ● “Shipping Condition” (p. 45)
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On ●
with Mains power On / Off switch.
Auto Setup varies depending on the country you select■
Depending on the country you select, you may be required to select the Favourite Network or Region.
●
Search Mode
if you select “Germany”,
“Austria”, “Switzerland”,
(
“Sweden” or “Finland”
Search Mode
All ChannelsFree Channels
)
select mode
set
Analogue Auto Setup●DVB-T Auto Setup●
Auto Setup - DVB-T and Analogue
DVB-T ScanCH 569
Analogue ScanCH 2CC 214199
This will take about 6 minutes.
CHChannel NameType Quality
62CBBC ChannelFree TV 10
62BBC Radio WalesFree TV 10
62E4Free TV 10
62Cartoon NwkFree TV 10
29Analogue
33BBC1Analogue
Free TV: 4Pay TV: 0Radio: 0Data: 0
Searching
-
-
Analogue: 2
DVB-S Auto Setup●
(if you select “Germany”, “Austria” or “Switzerland”)
DVB-S Auto Setup
Satellite
Analogue Scan2168
Progress
Analogue Scan68
This will take up to 15 minutes.
Astra 19.2°E
Hot Bird 13°E
Checking LNB2
0100%
Satellite
Press EXIT to skip Satellite installation
Searching Satellite
DVB-S Auto Setup
Satellite
Analogue Scan2168
Progress
Analogue Scan68
This will take about 30 minutes.
No.Channel NameType Quality
372CBBC ChannelFree TV 10
372BBC Radio WalesFree TV 10
372E4Free TV 10
Free TV: 3Pay TV: 0Radio: 0
Satellite Search:
If you have only one LNB (not having
DiSEqC control antenna system), you
can skip this step by pressing the EXIT
button.
DVB-C Auto Setup●
if you select a country
except “Portugal”, “Poland”,
(
“Hungary” and “E.Eu”
Auto Setup - DVB-T and Analogue
DVB-T ScanCH 569
Analogue ScanCH 2CC 214199
This will take about 6 minutes.
CHChannel NameType Quality
62CBBC ChannelFree TV 10
62BBC Radio WalesFree TV 10
62E4Free TV 10
62Cartoon NwkFree TV 10
Free TV: 4Pay TV: 0Radio: 0Data: 0
Searching
Analogue: 0
)
if you select
(
“Sweden” or “Finland”
DVB-C Auto Setup
Progress0%100%
Analogue Scan2168
This will take about 3 minutes.
No.Channel NameType Quality
1CBBC ChannelFree TV 10
2BBC Radio WalesFree TV 10
3E4Free TV10
Free TV: 3Pay TV: 0Radio: 0Data: 0
0100%
Searching Satellite
Searching
Quick Start Guide
Auto Setup●
Checking LNB1
)
If you select “Shop” by mistake■
Return to viewing environment selection by
pressing the RETURN button.
Automatic Demo
OffOn
If you set to “Off” or “On” in this menu the ●
TV will be in “Shop” viewing environment.
To return to “Home” viewing environment
initialise all settings by accessing
Shipping Condition.
“Shipping Condition” (p. 45)
BACK/
RETURN
Select “Home”
Please select your viewing environment.
HomeShop
select
set
Auto Setup is complete
13
Watching TV
Turn power on
(Press for about 1 second)
Select the mode
TV
The selectable modes vary depending on the country you select (p. 12).●
If “TV Selection” menu is not displayed, press the TV button to switch the ●
mode.
ASPECT
MENU
R
E
I
V
1
2
INPUT
TV
N
EXIT
T
O
A
O
L
S
Mains power On / Off switch should be On. (p. 8)●
TV Selection
DVB-S
DVB-C
DVB-T
Analogue
watch
select
OPTION
TEXT
ghi
STTL
REC
TV
BACK/
RETURN
INDEX
HOLD
abcdef
jkl
mno
tuvpqrs
wxyz
PROGRAMME
DVD/VCR
TV
Volume
3
1 BBC ONE WALES
Coronation Street
20 : 00 - 20 : 55
All DVB-T Channels
20:35
Change category
For info press
Now
Information banner appears whenever you select a
channel
For details ● p. 15
Also possible to select the mode pressing the TV button repeatedly on the ●
remote control or side panel of the TV. (p. 8)
Select a channel
up
or
down
To select from the Channel List
●
All DVB-T Channels
6
7
8
1
2
3
4
abcdef
jkl
ghi
mno
tuvpqrs
wxyz
Cartoon Nwk
BBC Radio Wales
BBC Radio Cymru
BBC ONE Wales
BBC THREE
BBCi
CBBC Channel
To select a more than two-digit channel ●
position number, e.g. 399
def
wxyz
wxyz
select channel
watch
14
Note
To watch pay-TV ●
“Using Common
Interface”
(p. 44)
Select a channel using Information banner ■(p. 15)
Possible to confirm the channel name and programme before changing channels.
Display Information banner if it is
not displayed
While the banner is displayed,
select the channel
select channel
watch
Possible to set display timeout in ●
“Banner Display Timeout” (p. 30).
Select a channel using TV Guide ■(p. 18)
Possible to confirm the TV Guide (EPG or Channel List) before changing channels.
This function may not be available in some countries.
●
Display TV GuideSelect the channel
G
U
I
D
E
select
watch
Other useful functions
■
Hold
Freeze / unfreeze picture
Display Information banner
Display Information banner
Also appears when changing a channel●
Channel position and name
Example (DVB):
1 ZDF
Programme
Programme Start / Finish time
Example (Analogue):
3 ITV
itv1
CH23
Encrypted
Channel number
To confirm another tuned ●
channel name
Coronation Street
20 : 00 - 20 : 55
Radio
19:35
SubtitlesAD
All Analogue Channels
HOLD
Channel type (if it is Radio or Data channel)
EncryptedDolby D +
Features available / Message meanings
For info press
Stereo45
Category
To change the category ●
Current time
20:35Radio
Now
Sound mute On
Bad signal
Poor TV signal quality
Encrypted
Scrambled programme
blue
All DVB-T Channels
Change category
For info press
45
Viewing
Watching TV●
To watch the channel listed in the banner ●
Information on the next programme ●
(DVB)
EXIT
To hide
●
Extra information ●
(DVB) (press again to hide the banner)
To set display timeout
●
“Banner Display Timeout” (p. 30)
Dolby D +, Dolby D
Dolby Digital Plus or Dolby Digital audio track
Subtitle service available
Teletext service available
Multiple audio available
Multiple video available
Stereo, Mono
Audio mode
1 - 90
Off Timer remaining time
● p. 17
For settings
15
Watching TV
Other useful functions
■
Display subtitles
Display / hide subtitles (if available)
To change the language for DVB (if available)●
STTL
“Preferred Subtitles” (p. 30)
Note
If you press the STTL button in Analogue mode, it switches to teletext service and calls up a favourite page ●
(p. 21). Press the EXIT button to return to TV mode.
Aspect
Change the aspect ratio (image size)
Enjoy viewing the image at its optimum size and aspect.
Normally programmes have the Aspect Control Signal (Widescreen signal, etc.), and the TV will choose the
aspect ratio automatically according to the Aspect Control Signal (p. 72).
If you would like to change the aspect ratio manually■
Display Aspect Selection listWhile the list is displayed, select the mode
ASPECT
To change the mode using the ASPECT button only ●
ASPECT
Aspect Selection list
(Press repeatedly until you reach the desired mode)
Aspect selection
Auto
16:9
14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
Select
Change
EXIT
RETURN
store
select
ASPECT
Auto
The best ratio is chosen and the image expanded to fill the screen.
For details
16:94:3 Full
p. 72
Directly displays the image at 16:9
without distortion (anamorphic).
14:9Zoom1
Displays the image at the standard 14:9
without distortion.
JustZoom2
Displays a 4:3 image full-screen.
Stretching is only noticeable at the left
and right edges.
4:3Zoom3
Displays the image at the standard 4:3
without distortion.
Note
Only “16:9” and “4:3 Full” are available in HD channels.●
Only “16:9” and “4:3” are available in PC input mode.●
Not available when the subtitle function is active.●
Not available in teletext service.●
Aspect mode can be memorized separately for SD (Standard definition) and HD (High definition) signals.●
Displays a 4:3 image enlarged
horizontally to fit the screen.
HD signal only
●
Displays a 16:9 letterbox or 4:3 image
without distortion.
Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
Displays a 2.35:1 letterbox (anamorphic)
image full-screen without distortion. At
16:9, displays the image at its maximum
(with slight enlargement).
16
Other useful functions
■
Display the selectable settings for the current programme
To change ●
change
select
Teletext Character Set
Sets the teletext language
Check or change the current
programme status instantly
Multi Video (DVB mode)
Allows you to select the image (if available)
OPTION
Setup Menu (p. 30)
Multi Audio (DVB mode)
Allows you to select between alternative language for
sound tracks (if available)
Teletext Language (DVB mode)
Allows you to select between alternative language for
teletext (if available)
Sub Channel (DVB mode)
Allows you to select the multifeed programme - sub
channel (if available)
Subtitle Language (DVB mode)
Allows you to select the language in which subtitles
MPX (Analogue mode)
Sound Menu (p. 27)
Volume Correction
Adjusts volume of individual channel or input mode
should appear (if available)
Note
Also possible to change the settings in Menu list (p. 26 - 31).●
Off Timer
Turn the TV off automatically after a fixed period
Display the menuSelect “Setup”Select “Off Timer” and set the time
MENU
Main Menu
Picture
Sound
Setup
access
select
To cancel ● Set to “Off” or turn the TV off.
To display the remaining time●Information banner (p. 15)
Setup Menu
Off TimerOff
Link Settings
Child Lock
DVB-T Tuning Menu
Language
Display Settings
Common Interface
System Menu
Other Settings
set
select
Viewing
Watching TV●
Note
When the remaining time is within 3 minutes, the remaining time will flash on the screen.●
17
Using TV Guide
TV Guide―Electronic Programme Guide (EPG) provides an on-screen listing of the programmes
currently broadcast and the forthcoming broadcasts over the next seven days (depending on the
broadcasters).
This function varies depending on the country you select (p. 12).●
DVB-T and Analogue channels are displayed on the same TV Guide screen. ●
Analogue channels will be listed after DVB-T channels but there will be no programme listings. “D” means DVB-T
channel and “A” means Analogue channel.
When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time ●
before the TV Guide is completely shown.
Select the mode
ASPECT
OPTION
TEXT STTL
MENU
INPUT
AV
TV
DIRECT TV REC
N
EXIT
BACK/
RETURN
INDEX HOLD
1
2
TV Guide
time
Example:
Wed 24/10/2007
10:46
Select channel
View
-24 hours+24 hoursProg.TypeCategory
Advertisement
p. 14
TV
View TV Guide
G
U
I
D
E
Current date and time
TV Guide date
TV Guide: Landscape
Wed 24th
1 BBC ONE
20:00 - 20:30 DIY SOS : We open in the Battersbys
Time:20:0020:3021:00
1
BBC ONE
D
BBC THREE
7
D
E4Emmerdal. Coronation StreetThe Bill
14
D
BBC FOUR 10 O’ clock News BBCPepsi Char. Good bye
70
D
BBC 2WPanoramaSpring watchCoast
72
D
BBCiI’m A CelebrityPop IdolNews
105
D
BBC Radi
719
DRugby15 To 1The Bill
EXIT
Select programme
RETURN
Landscape (Displays by channel)
Channel position and name
To change the layout (Landscape / Portrait) ●
view “Landscape” to see many channels
view “Portrait” to see one channel at a time
Programme
All TypesAll Channels
19:30
EastenderDIY SOSThe BillRed Cap
Hot WarsHoliday Program
Info
GUIDE
Change display mode
OPTION
Select Advert
Page up
Page down
Example:
Wed 24/10/2007
10:46
Select programme
View
D 1 BBC ONE D
19:30~20:00
20:00~20:30
20:30~21:00
21:00~22:00
22:30~23:00
23:00~23:30
23:00~00:00
EXIT
Select channel
RETURN
G
U
I
D
E
TV Guide: Portrait
Wed 24th
7 BBC THREE
Eastender
DIY SOS
The Bill
Red Cap
Live junction
POP 100
Rugby
Info
GUIDE
Change display mode
OPTION
Select Advert
+24 hoursProg.TypeCategory
All TypesAll Channels
D 14 E4D 70 BBC FOUR
Portrait (Displays by time)
Page up
Page down
To return to TV ■
EXIT
REC
TV
PROGRAMME
DVD/VCR
TV
To the previous day ■
(DVB mode)
red
To watch the programme■
Select the programme or channel
select
watch
To view a ■
channel list of
the selected type
(DVB mode)
yellow
To view a ■
channel list
of the selected
category
blue
Prog.Type
All Types
All Types
Movie
News
.
.
.
.
.
Categor y
Categor y
All Service s
All Channels
All Channels
All DVB-T Channels
All Analogue Channels
Free Channels
Pay Channels
TV
Radio
Favourites1
Favourites2
Favourites3
Favourites4
To the next day ■
(DVB mode)
green
To view details of the ■
programme (DVB mode)
Select the programme
select
Press again to ●
return to TV Guide.
(Type list)
select type
view
(Category list)
Only Analogue channels are listed
select category
view
To list favourite channels p. 37
18
Depending on the country you select, this TV supports the GUIDE Plus+ system in DVB-T or ■
Analogue mode
The postcode entry or update is required. Follow the message’s instructions.
Also possible to setup manually from the Setup Menu ●
“Update” / “Postcode” in “GUIDE Plus+ Settings” (p. 31)
Enter your postcode when using this function for the first time. If you enter an incorrect postcode for your ●
area, or no postcodes are entered, advertisement may not be displayed correctly.
OPTION
Display advertisement information
To change advertisements●
or
BACK/
RETURN
To return to TV Guide●
OPTION
To display the latest advertisement●“Update” in “GUIDE Plus+ Settings” (p. 31)
Note
To update the information continuously, the TV must be left in Standby mode at night.●
Depending on the country you select, TV Guide may not be supported■
In this case, Channel List will appear.
All Analogue Channels
Cartoon Nwk
6
7
BBC Radio Wales
BBC Radio Cymru
8
1
BBC ONE Wales
BBC THREE
2
BBCi
3
CBBC Channel
4
select channel
watch
Viewing
Using TV Guide●
19
Viewing Teletext
Teletext services are the text information provided by the broadcasters.
The features may vary depending on the broadcasters.
What is FLOF (FASTEXT) mode?
In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
What is TOP mode? (in case of TOP text broadcasting)
TOP is a particular improvement of the standard teletext service that results in an easier search and effective guide.
Fast overview of the teletext information available●
Easy to use step-by-step selection of the topical subject●
Page status information at the bottom of the screen●
Available page up / down
To select among subject blocks
To select next subject within the subject block
(After the last subject, it moves to the next subject block.)
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”, p. 21)
To change mode■“Teletext” in the Setup Menu (p. 30)
AV
DIRECT TV REC
MENU
N
EXIT
ASPECT
1
red
green
blue
Switch to Teletext
TEXT
Displays the ●
index page
(content varies
depending on the
broadcasters)
yellow
Current
page
number
Sub page number
<< 01 02 03 04 05 06 07 >>
17:51 28 Feb
TELETEXT
INFORMATION
Time / date
OPTION
TEXT STTL
BACK/
RETURN
INDEX HOLD
abcdef
2
Select the page
abcdef
jkl
ghi
mno
tuvpqrs
wxyz
To adjust contrast ■
jkl
ghi
mno
tuvpqrs
wxyz
To return to TV ■
Reveal hidden data
Reveal hidden words e.g. quiz page answers
MENU
red
To rehide ●
FULL / TOP / BOTTOM
MENU
green
Colour bar
up
green
or
down
MENU
red
or
(Corresponds to the colour bar)
yellowblue
As the blue bar is displayed
(Press three times)
EXIT
red
(TOP)(BOTTOM)Normal (FULL)
20
(Expand the TOP half)(Expand the BOTTOM half)
HOLD
Stop automatic updating
(If you wish to hold the current page without updating)
HOLD
To resume ●
HOLD
INDEX
Return to the main index page
INDEX
Call up a favourite page
View a favourite page stored
STTL
Call up the page stored on the blue button (List mode).●
Factory setting is “P103”.●
View in multi window
Watch TV and Teletext in two windows at once
MENU
(press twice)
Operations can be made only in Teletext screen.●
Select Picture and text On or Off
Store frequently viewed pages
Store frequently viewed pages in the colour bar
As page is
displayed
To change stored pages■
Coloured button
you want to
change
Corresponding
coloured button
Enter new page number
press
and
hold
The number changes to white.
abcdef
jkl
ghi
mno
tuvpqrs
wxyz
press
and
hold
View sub page
View sub page (Only when teletext is more than one page)
Appears at top of
the screen
To view specific sub page■
Enter the
MENU
blue
Sub pages: ●
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
4-digit number
example: P6
mno
(List mode only)
Viewing
Viewing Teletext●
Watch TV while waiting for update
View the TV picture while searching for a teletext page
Teletext automatically updates itself when new information becomes available.
MENU
The news page provides a function that indicates arrival of latest news (“News Flash”).●
yellow
Changes to TV screen temporarily
P108
(You cannot change the channel.)
Appears when
updating is
completed
View the updated page
yellow
21
Watching External inputs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
To connect the equipment ● p. 11 and p. 70
The Remote Control is capable of operating some functions of selected external equipment.
Turn the TV on
When connecting with SCART as example 2 or 3 ■(p. 11)
Receives input signals automatically when playback starts
●
Input signals are automatically identified by the SCART (pin 8)
terminal.
●
This function is also available for HDMI connections (p. 70).
If input mode is not switched automatically■
Perform and
Check the setup of the equipment.●
Display the Input select menu
AV
Select the input mode connected to the equipment
Input Selection
AV1
AV2/S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
Media Server
select
watch
ASPECT
OPTION
TEXT STTL
ghi
MENU
INPUT
AVTV
DIRECT TV REC
N
EXIT
BACK/
RETURN
INDEX HOLD
abcdef
jkl
mno
1
2
3
tuvpqrs
wxyz
You can also select the input using the AV button on the remote ●
control or the side panel of the TV.
Press the button repeatedly until the desired input is selected.
●
You cannot select “Media Server” using the AV button on the side panel
of the TV.
●
In order to switch between AV2 and AV2S, move the indicator by
pressing left and right cursor button.
REC
PROGRAMME
● “Input Labels” (p. 47)
You can label or skip each input mode
Skipped inputs will not be displayed when the AV button is pressed.
DVD/VCR
TV
4
TV
View
Displays the selected mode
To return to TV ■
TV
Note
If the external equipment has an aspect adjustment function, set to “16:9”.●
For details, see the manual of the equipment or ask your local dealer.●
22
Operating the equipment with the TV remote control
The equipment connected to the TV can be directly operated with the below buttons of this TV
remote control.
Selection Switch for operating the connected equipment
Select “DVD/VCR” to operate Panasonic DVD Recorder, DVD Player,
DVD/VCR
How to change the code for the type of the equipment
■
Each type of the Panasonic equipment has its own remote control code.
Please change the code according to the equipment you want to operate.
Set the position to “DVD/VCR”
TV
PROGRAMME
REC
Player theatre, Blu-ray Disc theatre or VCR
“How to change the code for the type of the equipment” (see below)
Select “TV” to operate the connected equipment in VIERA Link
“VIERA Link Control” (p. 68)
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
Channel Up / Down
Select channel
Record
Start recording
DVD/VCR
TV
Viewing
Watching External inputs●
Press and hold during the following operations
abcdef
jkl
ghi
Enter the appropriate code,
see table below
Type of the equipmentCode
DVD Recorder, DVD Player70 (default)
Player theatre, Blu-ray Disc theatre71
VCR72
mno
tuvpqrs
wxyz
Press
Note
Confirm if the remote control works correctly after changing the code.●
The codes may be reset to default values if batteries are replaced.●
Some operations may not be possible on some equipment models.●
23
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions.
Display the menu
ASPECT
OPTION
TEXT STTL
@
ghi
MENU
INPUT
AVTV
DIRECT TV REC
EXIT
BACK/
RETURN
INDEX HOLD
abcdef
jkl
mno
tuvpqrs
wxyz
1
2
3
MENU
Select the menu
Main Menu
Picture
Sound
Setup
(example: Picture Menu)
Select the item
Picture Menu1/2
Viewing ModeDynamic
Contrast
Brightness
Colour
Sharpness
Tint
Colour BalanceWarm
Colour ManagementOff
Eco ModeOff
Displays the functions that can be set ●
(varies according to the input signal)
60
0
30
5
0
(example: Picture Menu)
access
select
select
REC
PROGRAMME
DVD/VCR
TV
To return to TV ■
at any time
EXIT
To return to ■
the previous
screen
BACK/
RETURN
TV
Adjust or select
4
Picture Menu
Viewing ModeDynamic
Contrast
Brightness
Colour
Sharpness
Tint
Colour BalanceWarm
Colour ManagementOff
Eco ModeOff
(example: Picture Menu)
Choose from among ■
alternatives
Number and positions of alternatives
Colour BalanceNormal
Changed
Adjust using the slide bar■
Sharpness
Moved
Go to the next screen■
Child LockAccess
1/2
60
0
30
5
0
To reset the settings
■
change
store or access
( Required by
some functions)
To reset the picture settings only●
“Reset to Defaults” in the Picture
Menu (p. 26)
To reset the sound settings only●
“Reset to Defaults” in the Sound
Menu (p. 27)
●
To initialize all settings
5
“Shipping Condition” in the
Setup Menu (p. 31)
24
To change ■
menu pages
up
down
Displays the next screen
Enter characters by free input menu■
You can enter names or numbers freely for some items.
User input
Name
A B C D E F G H I J K L M N
U V W X Y Z0 1 2 3 4 5 6
a b c d e f g h i j k l m n
u v w x y z ( ) + - . * _
O P Q R S T
7 8 9 ! : #
o p q r s t
You can set characters by using numeric buttons.●
“Characters table for numeric buttons” (p. 76)
Set characters one by oneStore
select
set
BACK/
RETURN
Overview■
How to operate ● p. 24
Main Menu
Picture
Sound
Setup
Setup Menu
Off TimerOff
Link SettingsAccess
Child LockAccess
DVB-S Tuning MenuAccess
DVB-C Tuning MenuAccess
DVB-T Tuning Menu
Analogue Tuning Menu Access
LanguageAccess
Display SettingsAccess
Common Interface
System Menu
Other SettingsAccess
Only available items can be selected.●
Access
Access
Access
(p. 28 - 31)
Picture Menu
Viewing ModeDynamic
Contrast
Brightness
Colour
Sharpness
Tint
Colour BalanceWarm
Colour ManagementOff
Eco ModeOff
Picture Menu
P-NROff
3D-COMBOff
Multi WindowAccess
Advanced SettingsAccess
Reset to DefaultsReset
60
30
(p. 26 and p. 48)
Sound Menu1/2
ModeMusic
Bass
Treble
Balance
Headphone Volume
SurroundOff
Volume Correction
Speaker Distance to Wall
MPXStereo
Sound Menu
SPDIF SelectionAuto
MPEG Optical Level0dB
HDMI1 InputDigital
Reset to DefaultsReset
Over 30cm
Stereo
11
(p. 27)
Analogue Tuning Menu
Channel ListAccess
Auto Setup
Manual Tuning
Add DVB-T Channels
Access
Access
Access
(p. 29, 35, 41)
Display Settings
Preferred Subtitle Type
TeletextTOP
Teletext Character Set West
Input LabelsAccess
Banner Display Timeout
Playing Time Display
VIERA TOOLS
Standard
3 seconds
On
Rich
(p. 30)
System Menu
Shipping Condition
System Update
Software Licence
System InformationAccess
Access
Access
Access
(p. 31, 45, 46)
Other Settings
AV Colour SystemAuto
Guide Plus+ Settings
Intelligent Frame Creation
24p Smooth FilmOff
Power Save
Picture Overscan
SD Card LED
Time ZoneAuto
Access
Off
Off
On
On
(p. 31)
1/2
0
5
0
2/2
Advanced Settings
R-Gain
G-Gain
B-Gain
Gamma2.2
Reset to DefaultsReset
(p. 26)
0
0
0
Viewing
0
2/2
Link Settings
VIERA Link
Q-LinkAV2
AV2 outTV
Power on Link
Power off Link
Standby Power Save
Intelligent Auto Standby On (No reminder)
DownloadAccess
Network SetupAccess
DivX® VODAccess
DVB-S Tuning Menu
Favourites EditAccess
Channel ListAccess
Auto Setup
Manual Tuning
Update Channel List
Signal Condition
Antenna System
LNB ConfigurationAccess
Add DVB-T HD Channels
Add DVB-C Channels
On
On
On
On
Access
Access
Access
Access
DiSEqC1.0
Access
Access
(p. 28, 32, 33, 37 - 39)
DVB-C Tuning Menu
Favourites EditAccess
Channel List
Auto Setup
Manual Tuning
Update Channel List
New Channel Message
Signal Condition
Add DVB-T HD Channels
Access
Access
Access
Access
On
Access
Access
(p. 29, 34, 37 - 39)
DVB-T Tuning Menu
Favourites EditAccess
Channel List
Auto Setup
Manual Tuning
Update Channel List
Favourite Network
New Channel Message
Signal Condition
Add HD Channels
Add DVB-C Channels
Add DVB-S Channels
Access
Access
Access
Access
Access
On
Access
Access
Access
Access
(p. 29, 35, 37 - 39)
(p. 28)
How to Use Menu Functions●
(picture, sound quality, etc.)
25
How to Use Menu Functions
Menu list■
Menu
ItemAdjustments / Configurations (alternatives)
Viewing Mode
Contrast, Brightness,
Colour, Sharpness
Tint
Colour Balance
Colour Management
Basic picture mode (Dynamic / Normal / Cinema / Game)
Set for each input signal
●
Dynamic :
Normal : Recommended for viewing under normal ambient room lighting conditions
Cinema : For watching movies in a darkened room producing a cinema-like picture
Game : Fast response signal specifically to provide suitable images for playing games
Increases or decreases the levels of these options according to your personal preference
With an NTSC signal source connected to the TV, the picture hue can be adjusted to
suit your taste
For NTSC signal reception only
●
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
Automatically adjusts colours to vivid ones (Off / On)
Not valid on PC signal
●
Provides enhanced picture contrast and sharpness when viewing in a bright room
Not valid on TV mode
●
A continuous record of time spent using Game mode can be displayed in the ●
top right of the screen.
“Playing Time Display” (p. 30)
Eco Mode
Picture
P-NR
3D-COMB
Multi Window
R-Gain
Advanced Settings
G-Gain
B-Gain
Adjusts picture settings automatically dependent on ambient lighting conditions
(Off / On)
Picture Noise Reduction
Automatically reduces unwanted picture noise and flicker noise in the contoured parts of
a picture (Off / Min / Mid / Max)
Not valid on PC signal
●
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen
Set to “On” to display sharper and more accurate colours (Off / On)
For PAL or NTSC signal reception only
●
Not valid on RGB, S-Video, Component, PC, HDMI and SD Card●
Displays two windows at once (p. 48)
Adjusts the white balance for red areas
For PC input mode or when “Viewing Mode” is set to “Normal” / “Cinema”
●
Adjusts the white balance for green areas
For PC input mode or when “Viewing Mode” is set to “Normal” / “Cinema”
●
Adjusts the white balance for blue areas
For PC input mode or when “Viewing Mode” is set to “Normal” / “Cinema”
●
26
Gamma
Reset to Defaults
Reset to Defaults
Switches the gamma curve (2.0 / 2.2 / 2.5)
For PC input mode or when “Viewing Mode” is set to “Normal” / “Cinema”
●
Press the OK button to reset to the default Advanced Settings
For PC input mode or when “Viewing Mode” is set to “Normal” / “Cinema”
●
Press the OK button to reset the present Picture Viewing Mode to the default settings
Loading...
+ 58 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.