Panasonic th-55vf1h, th-55vfuw Operation Manual

Operating Instructions

Functional Manual

FULL HD LCD Display For business use

English

Model No.

TH-55VF1HU TH-55VF1HW

55-inch model

This manual is common to all the models regardless of suffixes of the

model number.

U : for US, Canada and Mexico

W : for EU, CIS, South East Asia and Middle East Asia

English

Please read these instructions before operating your set and retain them for future reference.

DPQP1100ZA

Dear Panasonic Customer

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display.

To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference.

Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions.

Visit our Panasonic Web Site http://panasonic.com

English

Before use

●

Illustrations and screens in this Operating Instructions are images for illustration purposes, and may be different from the actual ones.

Important Safety Instructions ..........................4

FCC STATEMENT ..............................................5

Important Safety Notice ................................... 6

Safety Precautions ........................................... 7

Precautions for use ........................................ 10

Accessories ....................................................12

Accessories Supply ·········································· 12

Remote Control Batteries ·································· 13

VESA Mounting ...............................................13

Cautions when moving .................................. 14

LCD panel protection ..................................... 14

Eyebolt.............................................................15

Kensington security ....................................... 15

Connections .................................................... 16

AC cord connection and fixing ···························· 16

Cable fixing ···················································· 16

Video equipment connection ······························ 17

Before connecting ············································ 18

HDMI terminal connection ·································· 19

DisplayPort terminal connection ·························· 20

DVI-D IN 1 / DVI-D IN 2 terminal connection ·········· 21

PC IN terminal connection ································· 22

DIGITAL LINK IN / OUT terminal connection ·········· 23

VIDEO IN terminal connection ···························· 24

COMPONENT/RGB IN terminal connection··········· 25

SERIAL terminal connection ······························· 25

IR IN/IR OUT terminal connection ······················· 28

AUDIO OUT terminal connection ························· 28

USB terminal connection ··································· 29

Speaker terminal connection ······························ 29

Identifying Controls ........................................30

Main Unit ······················································· 30

Remote Control Transmitter ······························· 31

Basic Controls ................................................ 32

Selecting the input signal ··································· 34

RECALL·························································35

Volume Adjustment ··········································35

Sound mute On / Off ········································· 35

OFF TIMER ···················································· 36

ASPECT Controls ........................................... 37

Digital ZOOM ................................................... 38

On-Screen Menu Displays ............................. 39

Adjusting Position .......................................... 41

Auto setup ······················································ 41

Sound Adjustment .......................................... 43

Picture Adjustments ....................................... 44

Picture Profiles ............................................... 46

Saving profiles ················································ 47

Loading profiles ··············································· 48

Editing profiles ················································ 49

Setup menu ..................................................... 50

Signal ···························································· 50

Control settings ··············································· 54

Multi display settings ········································ 57

Input search ···················································· 58

Failover/Failback ············································· 59

Colour matching function ··································· 63

Screensaver (For preventing image retention)········ 64

Input label ······················································ 65

Power management settings ······························ 66

Wobbling ························································ 67

DIGITAL LINK out ············································ 67

No activity power off ········································· 67

Power ON screen delay ···································· 68

OSD language ················································ 68

Set up timer ···················································· 68

Date and time ················································· 69

Network settings ·············································· 69

USB media player settings ································· 72

Function button settings ···································· 73

Startup image settings ······································ 74

Display orientation ··········································· 76

OSD position ·················································· 76

Menu display duration ······································· 76

Menu transparency ·········································· 76

Options Adjustments .....................................77

Using Network Function ................................ 83

Necessary environment for computers to be connected ···

Example of network connection ·························· 83

Command control ············································ 85

Control Command via LAN ································ 85

PJLink protocol ················································ 89

Early Warning Software ····································· 90

Multi Monitoring & Control Software ····················· 90

Video Wall Manager ·········································90

Connecting with LAN ..................................... 91

Computer operation ·········································· 91

Using Web Browser Control .......................... 91

Before Using Web Browser Control ····················· 91

Access from Web Browser ································· 92

Operating with Web Browser ······························ 92

Using Web Browser Control ······························· 96

USB media player ........................................... 98

Function description ········································· 98

Preparation ····················································· 99

Playing back the files ······································ 101

Network environment (Multi Media Player only) ···· 104

Starting / ending Media Player ·························· 104

Resume Play function ····································· 104

Data Cloning .................................................105

Copying data to other display via LAN ················ 105

Copying the display data to the USB memory ······ 107

Copying the USB memory data to the display ······ 108

USB memory network settings ...................109

Saving the LAN setting file to the USB memory device ····109

Copying the USB memory data to the display ······ 109

Controller ID function ................................... 110

Setting the remote control’s ID number ················110

Cancelling the setting of remote control’s ID number

··························································110

(ID “0”)

Entering characters ...................................... 111

Preset Signals ............................................... 112

Shipping condition ....................................... 114

Troubleshooting ...........................................115

Specifications ............................................... 118

Software License .......................................... 120

English

WARNING: RISK OF ELECTRIC SHOCK

DO NOT OPEN

Important Safety

WARNING

WARNING: To reduce the risk of electric shock, do not remove cover or back.

No user-serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

WARNING :

To prevent damage which may result in fire or shock hazard, do not expose this apparatus to rain or moisture.

Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set.

(including on shelves above, etc.)

WARNING :

1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the grounding plug.

Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments / accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

English

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC CAUTION:

To assure continued compliance, follow the attached installation instructions and use only the provided power supply cord and DVI interface cable. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device.

Declaration of Verification

Model No.

TH-55VF1HU

Responsible Party:

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, New Jersey

07102-5490

Contact Source:

Panasonic System Communications Company of North America

1-877-655-2357

General Contact:

http://shop.panasonic.com/support

This device complies with Part 15 of the FCC Rules and all applicable IC RSS standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CANADIAN NOTICE:

This Class A digital apparatus complies with Canadian ICES-003.

WARNING:

Not for use in a computer room as defined in the

•

Standard for the Protection of Electronic Computer/ Data Processing Equipment, ANSI/NFPA 75.

For permanently connected equipment, a readily

•

accessible disconnect device shall be incorporated in the building installation wiring.

For pluggable equipment, the socket-outlet shall

•

be installed near the equipment and shall be easily accessible.

Note:

Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen. However, it will disappear when a general moving picture is displayed for a while.

Trademark Credits

Microsoft, Windows and Internet Explorer are the

•

registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Macintosh, Mac, Mac OS, OS X and Safari are the

•

trademarks of Apple Inc. registered in the United States and other countries.

PJLink is a registered or pending trademark in Japan,

•

the United States, and other countries and regions.

HDMI, the HDMI Logo, and High-Definition

•

Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

JavaScript is a registered trademark or a trademark of

•

Oracle Corporation and its subsidiary and associated companies in the United States and/or other countries.

RoomView, Crestron RoomView and Fusion RV are

•

registered trademarks of Crestron Electronics, Inc.

Crestron Connected is the trademark of Crestron Electronics, Inc.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

English

Important Safety Notice

WARNING

1) To prevent damage which may result in fire or shock hazard, do not expose this appliance to dripping or splashing.

Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.)

No naked flame sources, such as lighted candles, should be placed on / above the set.

2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the earthing plug.

4) To prevent electric shock, ensure the earthing pin on the AC cord power plug is securely connected.

CAUTION

This appliance is intended for use in environments which are relatively free of electromagnetic fields.

Using this appliance near sources of strong electromagnetic fields or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear.

To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic fields.

IMPORTANT INFORMATION

If a display is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

Using cabinets or stands recommended by the

•

manufacturer of the display.

Only using furniture that can safely support the

•

display.

Ensuring the display is not overhanging the edge

•

of the supporting furniture.

Not placing the display on tall furniture (for

•

example, cupboards or bookcases) without anchoring both the furniture and the display to a suitable support.

Not standing the displays on cloth or other

•

materials placed between the display and supporting furniture.

Educating children about the dangers of climbing

•

on furniture to reach the display or its controls.

WARNING:

This equipment is compliant with Class A of CISPR32.

In a residential environment this equipment may cause radio interference.

English

IMPORTANT: THE MOULDED PLUG

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This display is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is fitted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 10 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained.

A replacement fuse cover can be purchased from your local Panasonic dealer. Do not cut off the mains plug.

Do not use any other type of mains lead except the one supplied with this display. The supplied mains lead and moulded plug are designed to be used with this display to avoid interference and for your safety.

If the socket outlet in your home is not suitable, get it changed by a qualified electrician.

If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.

WARNING : — THIS DISPLAY MUST BE EARTHED.

How to replace the fuse.

Open the fuse compartment with a screwdriver and replace the fuse.

or the BSI mark on

Safety Precautions

WARNING

■ Setup

This LCD Display is for use only with the following optional accessories.

Use with any other type of optional accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Panasonic Corporation.)

Installation Mount

•

TY-VK55LV1

Cover-frame Kit

•

TY-CF55VW1

Early Warning Software

•

ET-SWA100 series

Video Wall Manager

•

TY-VUK10

1: Suffix of the part number may differ depending on

the license type.

2: Supports Ver1.4 or later.

Note

●

The part number of the optional accessories are subject to change without notice.

We are not responsible for any product damage, etc. caused by failures in the installation environment even during the warranty period.

Always be sure to ask a qualified technician to carry out set-up.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.

Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang over the edge of the base.

The Display may fall off or tip over.

•

Install this unit at a location with minimal vibration and which can support the weight of the unit.

Dropping or falling of the unit may cause injury or

•

malfunction.

Do not place any objects on top of the Display.

If foreign objects or water get inside the Display, a

•

short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer.

Transport only in upright position!

Transporting the unit with its liquid crystal panel

•

facing upright or downward may cause damage to the internal circuitry.

English

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths and curtains.

For sufficient ventilation, see page 10.

Caution - For use only with UL Listed Wall Mount Bracket with minimum weight/load 25.0 kg (56.0 lbs).

When installing the Display vertically, rotate clockwise and be sure that the Power Indicator comes to the downside.

(The Power Indicator is situated at the back.)

Heat is generated and it may cause fire or damage to the Display.

Installation should be performed by installation professionals.

Installing the Display incorrectly may lead to an accident that results in death or serious injury.

Specified Installation Mount (Optional) or a mounting

•

bracket that conform to VESA standards (VESA 400 ×

400) must be used. (see page 10)

Before installation, be sure to check if the mounting

•

location has enough strength to support the weight of the LCD display and the wall hanging bracket for anti drop.

If you terminate the use of the Display, ask

•

professionals to remove the Display as soon as possible.

When mounting the Display on the wall, prevent the mounting screws and power cable from contacting metal objects inside the wall.

An electric shock may occur if they contact metal objects inside the wall.

Do not place the display where it may be affected by salt or corrosive gas.

Doing so may cause the display to fall due to

•

corrosion. Also, the unit may malfunction.

Do not install the product to a place where the product is exposed to direct sunlight.

If the screen is exposed to direct sunlight, the liquid

•

crystal panel may have adverse effect.

■ When using the LCD Display

The Display is designed to operate on 110 ‒ 127 or 220 ‒ 240 V AC, 50/60 Hz.

Do not cover the ventilation holes.

Doing so may cause the Display to overheat, which

•

can cause fire or damage to the Display.

Do not stick any foreign objects into the Display.

Do not insert any metal or flammable objects into the

•

ventilations holes or drop them onto the Display, as doing so can cause fire or electric shock.

Do not remove the cover or modify it in any way.

High voltages which can cause severe electric shocks

•

are present inside the Display. For any inspection, adjustment and repair work, please contact your local Panasonic dealer.

Ensure that the mains plug is easily accessible.

The mains plug shall be connected to a mains socket outlet with a protective earthing connection.

Do not use any power supply cord other than that provided with this unit.

Doing so may cause short-circuit, generates heat,

•

etc., which could cause electric shock or fire.

Do not use the supplied power supply cord with any other devices.

Doing so could cause electric shock or fire.

•

Securely insert the power supply plug as far as it will go.

If the plug is not fully inserted, heat may be generated

•

which could cause fire. If the plug is damaged or the wall socket is loose, they shall not be used.

Do not handle the power supply plug with wet hands.

Doing so may cause electric shocks.

•

Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug body, not the cable.

Do not damage the cable, make any modifications

•

to it, place heavy objects on top of it, heat it, place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause fire and electric shock. If the power cable is damaged, have it repaired at your local Panasonic dealer.

Do not touch the power supply cord or the plug directly by hand when they are damaged.

Electric shock could occur.

•

Do not remove covers and NEVER modify the Display yourself

Do not remove the rear cover as live parts are

•

accessible when it is removed. There are no user serviceable parts inside. (High-voltage components may cause serious electrical shock.)

Have the Display checked, adjusted, or repaired at

•

your local Panasonic dealer.

Keep the supplied AAA/R03/UM4 batteries out of reach of children. If accidentally swallowed, it will be harmful to the body.

Please contact a doctor immediately in case you

•

doubt that the child may have swallowed it.

English

If the Display is not going to be used for any prolonged length of time:

Unplug the power supply plug from the wall outlet.

•

The power consumption is 0 W when the power

•

is turned off with the <Main power switch> on the display. However, the power consumption is 0.5 W when the power is turned off with the remote control or <Power button (Unit)>. (see page 30)

Picture noise may occur if you connect / disconnect the connection cables of the input terminals you are currently not watching, or if you turn the power of the video equipment on / off, but it is not a malfunction.

To prevent the spread of fire, keep candles or other open flames away from this product at all times.

CAUTION

If problems or malfunction occur, stop using immediately.

■ If problems occur, unplug the power supply

plug.

Smoke or an abnormal odour come out from the unit.

•

No picture appears or no sound is heard,

•

occasionally.

Liquid such as water or foreign objects got inside the

•

unit.

The unit has deformed or broken parts.

•

If you continue to use the unit in this condition, it could result in fire or electric shock.

Turn the power off immediately, unplug the power

•

supply plug from the wall outlet, and then contact the dealer for repairs.

To cut off the power supply to this Display completely,

•

you need to unplug the power supply plug from the wall outlet.

Repairing the unit yourself is dangerous, and shall

•

never be done.

To enable to unplug the power supply plug

•

immediately, use the wall outlet which you can reach easily.

■ Do not touch the unit directly by hand when

it is damaged.

Electric shock could occur.

■ When using the LCD Display

Do not bring your hands, face or objects close to the ventilation holes of the Display.

Heated air comes out from the ventilation holes at the

•

top of Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.

At least 2 people are required to carry or unpack this unit.

If this is not observed, the unit may drop, resulting in

•

injury.

Be sure to disconnect all cables before moving the Display.

If the Display is moved while some of the cables are

•

still connected, the cables may become damaged, and fire or electric shock could result.

Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any cleaning.

Electric shocks can result if this is not done.

•

Clean the power cable regularly to prevent it becoming dusty.

If dust built up on the power cord plug, the resultant

•

humidity can damage the insulation, which could result in fire. Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.

English

Do not step on, or hang from the display.

They might tip over, or might be broken and it may

•

result in injury. Pay special attention to the children.

Do not reverse the polarity (+ and -) of the battery when inserting.

Mishandling the battery may cause its explosion

•

or leakage, resulting in fire, injury or damage to surrounding properties.

Insert the battery correctly as instructed. (see

•

page 13)

Remove the batteries from the remote control transmitter when not using for a long period of time.

The battery may leak, heat, ignite or burst, resulting in

•

fire or damage to surrounding properties.

Do not burn or breakup batteries.

Batteries must not be exposed to excessive heat such

•

as sunshine, fire or the like.

Do not turn the Display upside down.

Do not position the unit with its liquid crystal panel facing upright.

Precautions for use

Cautions when installing

Do not set up the Display outdoors.

The Display is designed for indoor use.

•

Environmental temperature to use this unit

When using the unit where it is below 1 400 m

•

(4 593 ft) above sea level: 0 °C to 40 °C (32 °F to 104 °F)

When using the unit at high altitudes (1 400 m

•

(4 593 ft) and higher and below 2 800 m (9 186 ft) above sea level): 0 °C to 35 °C (32 °F to 95 °F)

Do not install the unit where it is 2 800 m (9 186 ft) and higher above sea level.

Failure to do so may shorten the life of the internal

•

parts and result in malfunctions.

We are not responsible for any product damage, etc. caused by failures in the installation environment even during the warranty period.

Do not place the display where it may be affected by salt or corrosive gas.

Failure to do so may shorten the life of the internal

•

parts and result in malfunctions due to corrosion.

Required space for ventilation

For the outermost periphery of the display, leave a

•

space of 10 cm (3.94”) or more at the top, bottom, left and right.

At the rear, leave a space of 5 cm (1.97”) or more.

About the screws used for the mounting bracket that conforms to VESA standards

Screw pitch for

installation

400 mm × 400 mm 16.3 mm M6 (4)

Do not grab the liquid crystal panel.

Do not forcibly press the liquid crystal panel, or push

•

it with a pointed object. Applying a strong force to the liquid crystal panel will cause unevenness of the screen display, resulting in malfunction.

Depending on the temperature or humidity conditions, uneven brightness may be observed. This is not a malfunction.

This unevenness will disappear while applying current

•

continuously. If not, consult the distributor.

■ Note regarding security

When using this product, take safety measures against the following incidents.

Personal information being leaked via this product

•

Unauthorized operation of this product by a malicious

•

third party

Interfering or stopping of this product by a malicious

•

third party

Depth of

screw hole

Screw

(quantity)

English

Take sufficient security measures. (see page 92, 94)

Set a password for the LAN control and restrict the

•

users who can log in.

Make your password difficult to guess as much as

•

possible.

Change your password periodically.

•

Panasonic Corporation or its affiliate companies will

•

never ask for your password directly. Do not divulge your password in case you receive such inquiries.

The connecting network must be secured by a

•

firewall, etc.

When disposing the product, initialize the data before

•

disposing.

[Shipping] (see page 114 )

Cleaning and maintenance

The front of the liquid crystal panel has been specially treated. Wipe the surface of the liquid crystal panel gently using only a cleaning cloth or a soft, lint-free cloth.

If the surface is particularly dirty, wipe with a soft,

•

lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

Do not scratch or hit the surface of the panel with

•

fingernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

If the cabinet is particularly dirty, soak the cloth in

•

water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

Do not allow any detergent to come into direct contact

•

with the surface of the Display. If water droplets get inside the unit, operating problems may result.

Avoid contact with volatile substances such as insect

•

sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

Usage of a chemical cloth

Do not use a chemical cloth for the panel surface.

•

Follow the instructions for the chemical cloth to use it

•

for the cabinet.

Wired LAN

When setting up the Display at a place, where electric statistic occurs often, take a sufficient antistatic measure before start using.

When the Display is used at a location, where static

•

electricity occurs often, such as on a carpet, a wired LAN communication is disconnected more often. In that case, remove static electricity and the noise source that may cause problems with an antistatic mat, and re-connect the wired LAN.

In rare cases, the LAN connection is disabled due

•

to static electricity or noise. In that case, turn off the power of the Display and the connected devices once and then re-turn on the power.

The Display may not work properly due to strong radio wave from the broadcast station or the radio.

If there is any facility or equipment, which outputs

•

strong radio wave, near the installation location, set up the Display at a location sufficiently far from the source of the radio wave. Or, wrap the LAN cable connected to the LAN terminal by using a piece of metal foil or a metal pipe, of which is grounded at both ends.

Disposal

When disposing the product, ask your local authority or dealer about the correct methods of disposal.

English

Accessories

Accessories Supply

Check that you have the accessories and items shown

Operating Instructions (CD-ROM × 1)

Power supply cord

(Approx. 2 m)

TH-55VF1HU

●

1JP155AF1U

TH-55VF1HW

●

1JP155AF1W

Remote Control Transmitter × 1

●

N2QAYA000093

LAN cable (CAT5e) × 1

(Approx. 2 m)

●

TZZ00001774A

External IR Receiver × 1

(Approx. 1.8 m)

●

DPVF1180ZA

Batteries for the Remote Control Transmitter

(AAA/R03/UM4 type × 2)

Clamper × 3

●

2JP155AF1W

●

3JP155AF1W

Attention

●

Store small parts in an appropriate manner, and keep them away from young children.

●

In case you lost accessories, please consult your dealer.

●

Dispose the packaging materials appropriately after taking out the items.

English

Remote Control Batteries

1. Pull and hold the hook, then open the battery cover.

2. Insert batteries - note correct polarity (+ and -).

AAA/R03/UM4 type

VESA Mounting

To mount this Display using a VESA mounting bracket (commercially available):

Protective Sheet

Table

3. Replace the cover.

Helpful Hint

●

For frequent remote control users, replace old batteries with Alkaline batteries for longer life.

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.

Disposal of batteries should be in an environmentfriendly manner.

Observe the following precaution:

1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

5. Battery replacement is necessary when remote control acts sporadically or stops operating the Display set.

6. Do not burn or breakup batteries.

7. Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

VESA Grid

1. Lay a protective sheet on a flat table, which was wrapped around this Display when it was packaged, beneath the screen surface so as not to scratch the screen face.

2. Ensure you have all accessories for mounting this Display.

3. Follow the instructions that came with the mounting kit. Failing to follow the correct mounting procedures could result in damage to the equipment, or injury to the user or install personnel. The product warranty does not cover the damage caused by improper installation even during the warranty period.

English

Cautions when

LCD panel

moving

The display has handles for carrying. Hold them when moving.

Handle

Note

●

Do not hold parts other than the handles.

●

At least 2 people are required to carry this unit.

If this is not observed, the unit may drop, resulting in injury.

●

When carrying the unit, keep the liquid crystal panel upright.

Carrying the unit with the surface of the liquid crystal panel facing up or down may cause deformation of the panel, or internal damage.

●

Do not hold the upper, lower, right and left frames or the corners of the unit. Do not hold the front surface of the liquid crystal panel. Also, do not hit such parts.

Doing so may damage the liquid crystal panel.

Also, the panel may crack, resulting in injury.

protection

Protection materials for the LCD panel have been attached on this unit.

Remove one on the bottom surface before installation and the other four on the front surface (left, right, top and bottom) after installation.

Protection material (front surface)

Protection material (bottom surface)

English

Eyebolt

Kensington security

The display has holes for attaching eyebolts (M10). When installing, use them to suspend the display.

Use the eyebolt only for temporary hanging or movement.

Eyebolt (commercially available) mounting positions

Note

●

Suspension and installation should be performed by an installation professional.

●

Do not install the Display using only 1 eyebolt.

●

Use the eyebolt of size M10, which fulfils the load condition of the mass of the product.

●

After installation, remove the eyebolts, and close the holes using the eyebolt caps removed when attaching the eyebolts.

The security slot of this unit is compatible with the Kensington security cables.

English

Connections

AC cord connection and fixing

Back of the unit

AC cord fixing

AC cord (supplied)

Cable fixing

Note

●

3 clampers are supplied with this unit. Fix the cables at 3 locations using the holes for clampers as shown below.

If you need more clampers, purchase them from your dealer. (Available from the customer service)

1. Attach the clamper

hole

Insert the clamper in a hole.

Plug the connector into the display unit.

Plug the connector until it clicks.

Note

●

Make sure that the connector is locked on both the left and right sides.

Unplug the AC cord

Unplug the connector pressing the two knobs.

Note

●

When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet first.

●

The supplied AC cord set is for this unit exclusive use. Do not use this for other purposes.

To remove from the unit:

2. Bundle the cables

hooks

To loosen:

knob

snaps

Keep pushing both side snaps and pull out the clamper.

Set the tip in the hooks and tighten.

Keep pushing the knob and pull out the tip.

English

Video equipment connection

R/PR/CR

B/CB

B/P

COMPONENT/RGB/VIDEOIN

G/Y/VIDEO

1 SERIAL IN,

SERIAL OUT:

21 3 4 5 6 7 8 9 10

SERIAL Input / Output Terminal

Control the Display by connecting to PC.

(see page 25)

2 IR IN,

IR OUT:

Infrared Signal Input / Output Terminal

Use this when operating more than one display with one remote control.

It is possible to receive signal from the remote control by connecting the supplied external IR receiver to the IR IN terminal.

(see page 28)

3 USB: USB Memory Terminal

Connect USB memory to use [USB media player] function or to read files. Also, this can be used to supply power of up to 5V/500mA to an external device when the picture is displayed.

(see page 29, 98)

4 AV IN

(HDMI):

HDMI Input Terminal

Connect to video equipment such as VCR or DVD player, etc.

(see page 19)

5 AV IN

(DisplayPort):

DisplayPort Input Terminal

Connect to PC or video equipment with DisplayPort output terminal.

(see page 20)

6 DVI-D IN 1,

DVI-D IN 2:

DVI-D Input Terminal

Connect to PC or video equipment with DVI-D output.

(see page 21)

7 DIGITAL LINK /

LAN IN/OUT:

DIGITAL LINK / LAN Input / Output Terminal

Connect to a device that sends video and audio signals via the DIGITAL LINK terminal.

Alternatively, control the display by connecting to Network.

Also, when displaying the picture by daisy chaining multiple displays, connect to the other display.

(see page 23, 83)

8 PC IN: PC Input Terminal

Connect to video terminal of PC, video equipment with “YP

BPR /

YCBCR” or “RGB” output.

(see page 22)

9 AUDIO1 IN: Audio input terminal shared

with DVI-D IN 1 / 2 and PC IN

(see page 21, 22)

English

10 COMPONENT /

RGB / VIDEO IN:

COMPONENT / RGB Video Input Terminal (R/PR/CR, B/PB/ CB, G/Y)

Connect to video equipment

BPR / YCBCR” or “RGB”

with “YP output.

(see page 25)

Composite Video Input Terminal (VIDEO)

Connect to video equipment with Composite signal output.

(see page 24)

11 AUDIO2 IN: Audio Input Terminal shared

with COMPONENT/RGB IN and VIDEO IN

(see page 24, 25)

12 AUDIO OUT: Analogue Audio Output

Terminal

Connect to audio equipment with analogue audio input terminal.

(see page 28)

13 EXT SP: Speaker Terminal

Connect to external speaker.

(see page 29)

Before connecting

●

Before connecting cables, carefully read the operating instructions for the external device to be connected.

●

Turn off the power of all devices before connecting cables.

●

Take note of the following points before connecting the cables. Failure to do so may result in malfunctions.

When connecting a cable to the unit or a device

•

connected to the unit itself, touch any nearby metallic objects to eliminate static electricity from your body before performing work.

Do not use unnecessarily long cables to connect

•

a device to the unit or to the unit body. The longer the cable, the more susceptible to noise it becomes. Since using a cable while it is wound makes it act like an antenna, it is more susceptible to noise.

When connecting cables, connect GND first, then

•

insert the connecting terminal of the connecting device in a straight manner.

●

Acquire any connection cable necessary to connect the external device to the system that is neither supplied with the device nor available as an option.

●

If the outer shape of the plug of a connection cable is large, it may come in contact with the plug of an adjacent connection cable. Use a connection cable with the suitable plug size for the terminal alignment.

●

If video signals from video equipment contain too much jitter, the images on the screen may wobble. In this case, a time base corrector (TBC) must be connected.

●

When the sync signals output from PC or video equipment are disturbed, for example, when changing settings of video output, the colour of the video may be disturbed temporarily.

●

The unit accepts Composite video signals, YC

BPR signals, analogue RGB signals and digital

YP signals.

●

Some PC models are not compatible with the unit.

●

Use cable compensator when you connect devices to the unit using long cables. Otherwise the image may not display properly.

●

Refer to “Preset Signals” (see page 112 ) for the types of video signals that can be displayed with the unit.

BCR/

English

HDMI terminal connection

Note

●

Video equipment and HDMI cable shown are not supplied with this unit.

●

Some HDMI equipment may not be able to display picture.

●

For audio, it is also possible to use AUDIO1 IN or AUDIO2 IN terminal input. (For [Audio input select] function, see page 78.)

●

This Display does not support HDMI-CEC (HDMI Consumer Electronics Control) (VIERA LINK).

HDMI cable (commercially available)

Video Cassette Recorder

DVD Player

Pin assignments and signal names for HDMI Terminal

Pin No. Signal name

T.M.D.S Data2+

T.M.D.S Data2 Shield

T.M.D.S Data2-

T.M.D.S Data1+

T.M.D.S Data1 Shield

T.M.D.S Data1-

T.M.D.S Data0+

T.M.D.S Data0 Shield

T.M.D.S Data0-

T.M.D.S Clock+

T.M.D.S Clock Shield

T.M.D.S Clock-

SCL

SDA

DDC/CEC Ground

+5V DC

Hot Plug Detect

English

DisplayPort terminal connection

Note

●

Additional computer and cables shown are not supplied with this set.

●

Only Dual Mode (DP++) is compatible with DisplayPort terminal.

DisplayPort cable (commercially available) PC with DisplayPort output

Note

●

In connecting with PC which uses early chipsets or graphic cards compatible with DisplayPort, if the DisplayPort output of the PC is connected to this unit, malfunction of this unit or the PC may occur. In that case, turn the power of the unit or the PC off, and then turn it on again.

When inputting DisplayPort output to this unit, it is recommended to use the PC which the newest Chipset and Graphics Cards are used.

Pin assignments and signal names for DisplayPort

Pin No. Signal Name

ML_Lane 3 (n) GND (Ground) ML_Lane 3 (p)

ML_Lane 2 (n)

GND (Ground) ML_Lane 2 (p) ML_Lane 1 (n) GND (Ground) ML_Lane 1 (p) ML_Lane 0 (n) GND (Ground) ML_Lane 0 (p) CONFIG1 CONFIG2 AUX_CH (p) GND (Ground) AUX_CH (n) Hot Plug Detect GND (Ground) + 3.3 V DC output

English

DVI-D IN 1 / DVI-D IN 2 terminal connection

Note

●

Video equipment, DVI-D cable and audio cable shown are not supplied with this unit.

●

DVI-D IN terminal is for Single Link only.

●

For audio, it is also possible to use AUDIO2 IN terminal input. (For [Audio input select] function, see page 78.)

Shared with PC IN.

DVI-D cable (commercially available)

Stereo mini plug (M3) cable (commercially available)

PC with DVI-D video out

Pin assignments and signal names for DVI-D Input

Pin No. Signal Name

T.M.D.S. data 2-

T.M.D.S. data 2+

T.M.D.S. data 2 shield

DDC clock

DDC data

T.M.D.S. data 1-

T.M.D.S. data 1+

T.M.D.S. data 1 shield

+5 V DC

GND (Ground)

Hot plug detect

T.M.D.S. data 0-

T.M.D.S. data 0+

T.M.D.S. data 0 shield

T.M.D.S. clock shield

T.M.D.S. clock+

T.M.D.S. clock-

English

PC IN terminal connection

Shared with DVI-D IN 1 / DVI-D IN 2.

(Female)

(Male)

Mini D-sub 15p cable (commercially available)

Conversion adapter (if necessary) (commercially

available)

Stereo mini plug (M3) cable (commercially available)

The type of computer signal that can be connected

●

With regard to the typical PC input signals that are described in “Preset Signals” (see page 112 ), adjustment values such as for the standard picture positions and sizes have already been stored in this unit.

(Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical scanning frequency of 48 to 120 Hz.)

●

The display resolution is a maximum of 1 440 × 1 080 dots when the aspect mode is set to [4:3], and 1 920 × 1 080 dots when the aspect mode is set to [16:9]. If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity.

●

In [ENGLISH(US)] OSD language, [16:9] is displayed as [FULL].

Note

●

Additional computer, cables and conversion adapter shown are not supplied with this set.

Stereo mini plug (M3)

Connect a cable which matches the audio output terminal on the computer.

(commercially available)

●

Component Input is possible with the pin 1, 2, 3 of the Mini D-sub 15P Connector.

Change the [Component/RGB-in select] setting in the [Signal] menu to [Component] (when Component signal connection) or [RGB] (when RGB signal connection). (see page 51)

●

The PC IN terminal is DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will need to make setting changes to the computer at the time of connection.

●

There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.

●

Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range.

●

For audio, it is also possible to use AUDIO2 IN terminal input. (For [Audio input select] function, see page 78.)

Pin assignments and signal names for PC Input Terminal (Mini D-sub 15P)

15 14 13 12 11

Pin No. Signal Name

R (PR/CR)

G (Y)

B (PB/CB)

NC (not connected)

GND (Ground)

+5 V DC

GND (Ground)

NC (not connected)

SDA

HD/SYNC

SCL

67839

English

DIGITAL LINK IN / OUT terminal connection

Twisted pair cable transmitters such as the Panasonic Digital Interface Box (ET-YFB100G) or the DIGITAL LINK Switcher (ET-YFB200G) use twisted pair cables to transmit inputted video and audio signals, and these digital signals can be input to the Display via the DIGITAL LINK terminal.

Analogue signal is output as

Digital signal.

Note

●

Video equipment and connection cables are not supplied with this unit.

●

When connecting with DIGITAL LINK, be sure to configure each of the [Network settings] settings. (see page 69)

For the cautions for DIGITAL LINK setting and connection, see page 84.

●

Corresponding signal for DIGITAL LINK input is the same as that of HDMI input. (see page 112 )

PC to control the unit

Example: Panasonic ET-YFB100G

Video Cassette Recorder

DVD Player

English

Daisy chain connection

COMPONENT/RGB/VIDEOIN

G/Y/VIDEO

B/P

B/CB

R/PR/CR

It is possible to daisy chain multiple displays when displaying the picture on multi screen, etc.

Note

●

The cable for daisy chain connection is supplied with this unit. To connect the displays, use the supplied cable.

●

Up to 10 displays can be connected with a daisy chain. However, the number of connectable displays may be limited depending on the cables, signals, the devices used, etc.

●

When daisy chaining, it may take time for images to appear on all the displays.

●

HDCP can be supported for up to 8 displays for a daisy chain.

●

Even if the DIGITAL LINK OUT terminal of this unit is connected to the DIGITAL LINK input terminal of another device, audio and video are not output.

VIDEO IN terminal connection

Note

●

Video equipment, connection cables and conversion plugs are not supplied with this unit.

●

For audio, it is also possible to use AUDIO1 IN terminal input. (For [Audio input select] function, see page 78.)

LAN cable (CAT5e) (supplied)

First display Second display

Third display

English

Shared with

COMPONENT/RGB

IN.

Video pin cable (commercially available)

Pin-BNC conversion plug (commercially available)

Stereo audio cable (commercially available)

Video Cassette Recorder

DVD Player

COMPONENT/RGB IN terminal

COMPONENT/RGB/VIDEOIN

G/Y/VIDEO

B/P

B/CB

R/PR/CR

connection

Note

●

Video equipment, cables and conversion adapter shown are not supplied with this unit.

Shared with VIDEO IN.

SERIAL terminal connection

The SERIAL terminal conforms to the RS-232C interface specification, so that the Display can be controlled by a computer which is connected to this terminal.

Note

●

Additional computer and cables shown are not supplied with this set.

R LPRPBY

Video pin cable (commercially available)

Pin-BNC conversion plug (commercially available)

Stereo audio cable (commercially available)

DVD Player

RGB camera

Note

●

In accordance with the input signal connected to COMPONENT/RGB IN terminal, select the input [Component] or [RGB] in [Signal] - [Component/RGBin select]. (see page 51)

●

The RGB signal input to COMPONENT/RGB IN terminal corresponds to “SYNC ON G” only.

●

For audio, it is also possible to use AUDIO1 IN terminal input. (For [Audio input select] function, see page 78.)

(Female)

(Male)

D-sub 9p

RS-232C Straight cable (commercially available)

Note

●

Use the RS-232C straight cable to connect the computer to the Display.

English

It is possible to daisy chain multiple displays, and then control the specific display with PC.

Pin assignments and signal names for SERIAL Terminal

1 3 4 52

6 7 8 9

Pin No. Signal Name

NC (not connected)

RXD

TXD

Non use

GND (Ground)

Non use

RTS

CTS

NC (not connected)

These signal names are those of computer specifications.

Communication parameters

Signal level: RS-232C compliant

Synchronization method: Asynchronous

Baud rate: 9600 bps

Parity: None

Character length: 8 bits

Stop bit: 1 bit

Flow control: None

Shorted in this set

First display

Second display

Third display

Note

●

When daisy chaining, set [Serial daisy chain position]. (see page 55)

●

When daisy chaining, use a straight cable which pin

to are hard wired.

No.

English

Basic format for control data

The transmission of control data from the computer starts with a STX signal, followed by the command, the parameters, and lastly an ETX signal in that order. Add the parameter as required, in accordance with the control detail.

STX C1 C2 C3 P1 P2 P3 P4: P5 ETX

Start

(02h)

3-character command (3 bytes)

Command

Command Parameter Control details

PON None Power ON

POF None Power OFF

AVL *** Volume 000 - 100

AMT

IMS None Input select (toggle)

DAM

Colon

Parameter(s)

0 Audio MUTE OFF

1 Audio MUTE ON

HM1 HDMI input (HDMI)

DP1

DL1

DV1

DV2

PC1 PC IN input (PC)

VD1

YP1

UD1 USB input (USB)

None

ZOOM Zoom1

FULL 16:9

NORM 4:3

ZOM2 Zoom2

DisplayPort input (DisplayPort) DIGITAL LINK input (DIGITAL LINK) DVI-D IN 1 input (DVI-D1) DVI-D IN 2 input (DVI-D2)

VIDEO input (VIDEO)

COMPONENT input

(COMPONENT/ RGB IN)

Screen mode select (toggle)

End

(03h)

Note

●

If multiple commands are transmitted, be sure to wait for the response for the first command to come from this unit before sending the next command. When sending a command which does not require parameter, a colon (:) is not needed.

●

If an incorrect command is sent by mistake, this unit will send an “ER401” command back to the computer.

●

In Standby condition (power OFF with remote control or <Power button (Unit)>), the unit responds to PON command only.

●

When [Serial ID function] (see page 54) is set to [On], only the command that matches the display ID can be operated.

As the format, add the following header.

AD94;RAD=<XXX>;

For display ID, insert 001 to 100 or 000 for <XXX>.

For group ID, insert AAA (for A) to GGG (for G) for <XXX>.

●

Consult your local Panasonic dealer for detail instructions on command usage.

For more details, visit the following web site.

http://panasonic.net/prodisplays/

English

IR IN/IR OUT terminal connection

Connect the IR cable (supplied) from the IR OUT terminal of the first display to the IR IN terminal of the second display.

The infrared signal of the first display is sent to the second display.

In this case, the IR (infrared ray reception on the remote control sensor) on the second display does not operate.

Repeating the above connections enables the daisy chain connection.

It is possible to receive signal from the remote control by connecting the supplied external IR receiver to the IR IN terminal.

Note

●

IR cable is supplied with this unit.

●

While controlling this display, if the external IR receiver or the IR cable is connected to the IR IN terminal, the control is performed only with this terminal.

●

However, [Control settings] - [IR control] can be selected. (see page 54)

AUDIO OUT terminal connection

Note

●

Audio equipment and the cable shown are not supplied with this set.

line-in

Stereo audio cable (commercially available)

Audio equipment

Note

●

To output sound from AUDIO OUT terminal of the unit, be sure to set [Output select] in the [Sound] menu to [AUDIO OUT]. (see page 43)

External IR Receiver (supplied)

IR cable (supplied)

First display

Second display

Third display

English

USB terminal connection

Connect the USB memory to use [USB media player]. (see page 98)

Speaker terminal connection

Please use 8 Ω/10 W speaker.

USB memory device

Pin assignments and signal names for USB Terminal

1 3 42

Pin No. Signal name

+5 V DC

DATA -

DATA +

GND (Ground)

Power of up to 5V/500mA can be supplied to an external device when the picture is displayed.

●

If the electric current exceeding the power supplying capability is applied, the output is blocked, and the following message is displayed.

[USB DC5V OUT overload. Please remove cable or equipment, then turn the display off/on.]

In this case, remove the equipment and then turn the power off/on using the remote control, etc.

Note

●

Depending on the type of a USB memory device, it may come in contact with the periphery such as a back cover, and cannot be attached. Use a commercially sold extension cable, or use a small type of a USB memory device connectable to this unit.

●

Depending on the USB memory, the access lamp may remain blinking even when it is not being accessed. In this case, remove the device after switching to the input other than USB.

Also, when reading the user image, remove the device after the menu screen display finishes (see page 50). When performing the data cloning, remove the device after the completion screen is displayed. (see page 105)

Black

Red

While pressing the lever, insert the core wire.

Return the lever.

English

Identifying Controls

Main Unit

1 Main power switch ( / )

Switches the main power ON (

●

Turning ON/OFF the <Main power switch> is the same as plugging or unplugging the power plug. Switch the <Main power switch> ON ( turn the power ON / OFF with the remote control or <Power button (Unit)>.

2 Power Indicator / Remote control sensor (Back of

the unit)

The Power Indicator will light.

When the power of the unit is ON (Main power switch: ON (

●

Picture is displayed: Green

●

Power OFF (Standby) with remote control or <Power button (Unit)>: Red

•

●

Power OFF with “Power management” function : Orange

About “Power management” function, see page 66.

When the power of the unit is OFF (Main power switch: OFF (

Note

●

When the power indicator is orange, power consumption during standby is generally larger than that of when the power indicator is red.

))

When [Network control] is set to [On] : Orange

About [Network control] settings, see page 69.

)): No light

) / OFF ( ).

), and then

MENU ENTERINPUT

1 External Input Terminal

●

Connects to video equipment, PC, etc. (see page 17)

2 <Power button (Unit)> (

●

Turns the power ON (Picture is displayed.) / OFF (standby) when the <Main power switch> ( ON ( ).

3 <INPUT (Unit)>

●

Selects the connected device. (see page 34)

4 <MENU (Unit)>

●

Displays the menu screen. (see page 39)

5 <+ (Unit)> / <- (Unit)>

●

Adjusts the volume. (see page 35)

●

On the main screen, switches settings or adjusts settings level. (see page 39)

(Unit)> / < (Unit)>

6 <

●

Selects the setting item on menu screen. (see page 39)

7 <ENTER (Unit)>

●

Configures the item on menu screen. (see page 39)

●

Switches aspect mode. (see page 37)

)

/ ) is

English

+ 91 hidden pages

Panasonic th-55vf1h, th-55vfuw Operation Manual

Table of Contents

FCC STATEMENT

Important Safety Notice

Safety Precautions

WARNING

CAUTION

Precautions for use

Cautions when installing

Cleaning and maintenance

Wired LAN

Disposal

Accessories

Accessories Supply

Remote Control Batteries

VESA Mounting

Eyebolt

Kensington security

Connections

AC cord connection and fixing

Cable fixing

Video equipment connection

Before connecting

HDMI terminal connection

DisplayPort terminal connection

DVI-D IN 1 / DVI-D IN 2 terminal connection

PC IN terminal connection

DIGITAL LINK IN / OUT terminal connection

VIDEO IN terminal connection

SERIAL terminal connection

IR IN/IR OUT terminal connection

AUDIO OUT terminal connection

USB terminal connection

Speaker terminal connection

Identifying Controls

Main Unit