Panasonic TH-50PH9BS, TH-42PH9BS, TH-42PH9BK, TH-42PS9BS, TH-42PS9BK User Manual

...

Operating Instructions

Progressive Wide Plasma Display

Model No.

TH-42PS9BK TH-42PS9BS

9 S

-4 H T

High Deﬁ nition Plasma Display

TH-42PH9BK

Model No.

TH-42PH9BS TH-50PH9BK TH-50PH9BS

TH-42PS9

Please read these instructions before operating your set and retain them for future reference.

English

The illustration shown is an image.

Dear Panasonic Customer

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions.

Visit our Panasonic Web Site http://panasonic.net

Table of Contents

Important Safety Notice ........................................... 3

Safety Precautions ................................................... 4

Accessories .............................................................. 7

Accessories Supply ................................................. 7

Remote Control Batteries ........................................ 7

Connections .............................................................. 8

PC Input Terminals connection ................................ 9

SERIAL Terminals connection ............................... 10

AV connection ....................................................... 11

Power On / Off ......................................................... 12

Initial selections ..................................................... 13

Selecting the input signal ...................................... 13

Selecting the On-Screen Menu Language ............ 13

Basic Controls ........................................................ 14

On-Screen Menu Displays ..................................... 16

ASPECT Controls ................................................... 18

Adjusting Pos. /Size ............................................... 19

MULTI PIP ................................................................ 20

Advanced PIP .......................................................... 21

Picture Adjustments ............................................... 22

Advanced settings ................................................. 23

Sound Adjustment .................................................. 24

Mute ...................................................................... 24

Digital Zoom ............................................................ 25

PRESENT TIME Setup / Set up TIMER .................. 26

PRESENT TIME Setup .......................................... 26

Set up TIMER ........................................................ 27

Screensaver (For preventing after-images) ......... 28

Setup of Screensaver Time ................................... 29

Reduces screen after-image ................................. 29

Side Panel Adjustment .......................................... 30

Reduces power consumption ............................... 31

Customizing the Input labels ................................. 31

Setup for MULTI DISPLAY ...................................... 32

(For TH-42PS9BK/S)

How to Setup MULTI DISPLAY ............................. 32

How to set the display location number

for each Plasma Display ....................................... 33

(For TH-42PH9BK/S, TH-50PH9BK/S)

How to Setup MULTI DISPLAY ............................. 34

How to set the display location number

for each Plasma Display ....................................... 35

F (Seam hides video) Setting ................................ 36

ID Remote Control Function .................................. 36

Setup for Input Signals .......................................... 37

Component / RGB-in select ................................... 37

3D Y/C Filter .......................................................... 37

Colour system / Panasonic Auto ........................... 38

Cinema reality / P-NR ............................................ 38

Sync ...................................................................... 39

H-Freq. (kHz) / V-Freq. (Hz) .................................. 39

Options Adjustments ............................................. 40

Shipping condition ................................................. 43

Troubleshooting ..................................................... 44

VIDEO/PC input signals ......................................... 45

Speciﬁ cations ......................................................... 46

Trademark Credits

• VGA is a trademark of International Business Machines Corporation.

• Macintosh is a registered trademark of Apple Computer, USA.

• S-VGA is a registered trademark of the video Electronics Standard Association. Even if no special notation has been made of company or product trademarks, these trademarks have been

fully respected.

Note:

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on the Plasma Display. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

Important Safety Notice

IMPORTANT: THE MOULDED PLUG

WARNING

1) To prevent damage which may result in ﬁ re or shock hazard, do not expose this appliance to dripping or splashing.

Do not place containers with water (ﬂ ower vase, cups, cosmetics, etc.) above the set. (including on

shelves above, etc.)

No naked ﬂ ame sources, such as lighted candles, should be placed on / above the set.

2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualiﬁ ed service personnel.

3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type power plug. This plug will only ﬁ t an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the earthing plug.

4) To prevent electric shock, ensure the earthing pin on the AC cord power plug is securely connected.

CAUTION

This appliance is intended for use in environments which are relatively free of electromagnetic ﬁ elds. Using this appliance near sources of strong electromagnetic ﬁ elds or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear. To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic ﬁ elds.

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is ﬁ tted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark

If the plug contains a removable fuse cover, you must ensure that it is reﬁ tted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer.

If the ﬁ tted moulded plug is unsuitable for the socket outlet in your home, then the fuse shall be removed and the plug cut off and disposed of safety. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be ﬁ tted, please observe the wiring code as shown below. If in any doubt, please consult a qualiﬁ ed electrician.

WARNING : — THIS APPARATUS MUST BE EARTHED.

IMPORTANT : —The wires in this mains lead are coloured in accordance with the following code: — Green-and-Yellow : Earth Blue: Neutral Brown: Live

As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.

IMPORTANT: THE MOULDED PLUG

or the BSI mark on the body of the fuse.

ASA

The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.

How to replace the fuse.

Open the fuse compartment with a screwdriver and replace the fuse.

Safety Precautions

WARNING

Setup

This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)

• Speakers .............................................................................. TY-SP42P8W-K (TH-42PS9BK, TH-42PH9BK),

TY-SP42P8W-S (TH-42PS9BS, TH-42PH9BS), TY-SP50P8W-K (TH-50PH9BK), TY-SP50P8W-S (TH-50PH9BS)

• Pedestal ............................................................................... TY-ST07-K, TY-ST07-S, TY-ST08-K, TY-ST08-S

• Wall stand ............................................................................. TY-ST42PW1

• Mobile stand ......................................................................... TY-ST42PF3

• Wall-hanging bracket (vertical) ............................................. TY-WK42PV7

• Wall-hanging bracket (angled) ............................................. TY-WK42PR7

• Wall-hanging bracket (drawer type) ..................................... TY-WK42DR1

• Ceiling-hanging bracket ....................................................... TY-CE42PS7

• BNC Component Video Terminal Board ............................... TY-42TM6A

• BNC Composite Video Terminal Board ................................ TY-42TM6B

• BNC Dual Video Terminal Board .......................................... TY-FB9BD

• SCART Terminal Board ........................................................ TY-FB8SC

• RCA Component Video Terminal Board ............................... TY-42TM6Z

• RCA Composite Video Terminal Board ................................ TY-42TM6V

• RGB (Digital) Terminal Board ............................................... TY-42TM6D

• RGB Active Through Terminal Board ................................... TY-42TM6G

• PC Input Terminal Board ...................................................... TY-42TM6P

• Composite / Component Video Terminal Board ................... TY-42TM6Y

• SDI Terminal Board .............................................................. TY-FB7SD

• HD-SDI Terminal Board ........................................................ TY-FB7HD, TY-FB9HD

• HDMI Terminal Board ........................................................... TY-FB8HM

• Ir Through Terminal Board .................................................... TY-FB9RT

• Touch Panel ......................................................................... TY-TP42P8-S (TH-42PS9BK/S, TH-42PH9BK/S),

TY-TP50P8-S (TH-50PH9BK/S)

Always be sure to ask a qualiﬁ ed technician to carry out set-up.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.

Do not place the Plasma Display on sloped or unstable surfaces.

• The Plasma Display may fall off or tip over.

Do not place any objects on top of the Plasma Display.

•

If water is spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result in ﬁ re or electric shock. If any foreign objects get inside the Plasma Display, please consult your local Panasonic dealer.

Ventilation should not be impleded by covering the ventilation openings with items such as newspapers, table cloths and curtains.

For sufﬁ cient ventilation; If using the pedestal (optional accessory) for the Plasma Display, leave a space of at least 10 cm at the top, left and right, at least 6 cm at the bottom, and at least 7 cm at the rear. If using some other setting-up method, leave a space of at least 10 cm at the top, bottom, left and right, and at least 7 cm at the rear.

Safety Precautions

When using the Plasma Display

The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz.

Do not cover the ventilation holes.

• Doing so may cause the Plasma Display to overheat, which can cause ﬁ re or damage to the Plasma Display.

Do not stick any foreign objects into the Plasma Display.

• Do not insert any metal or ﬂ ammable objects into the ventilations holes or drop them onto the Plasma Display, as doing so can cause ﬁ re or electric shock.

Do not remove the cover or modify it in any way.

• High voltages which can cause severe electric shocks are present inside the Plasma Display. For any inspection, adjustment and repair work, please contact your local Panasonic dealer.

Ensure that the mains plug is easily accessible.

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.

Securely insert the power supply plug as far as it will go.

• If the plug is not fully inserted, heat may be generated which could cause ﬁ re. If the plug is damaged or the wall socket is loose, they shall not be used.

Do not handle the power supply plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug body, not the cable.

• Do not damage the cable, make any modiﬁ cations to it, place heavy objects on top of it, heat it, place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause ﬁ re and electric shock. If the power cable is damaged, have it repaired at your local Panasonic dealer.

If the Plasma Display is not going to be used for any prolonged length of time, unplug the power supply plug from the wall outlet.

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out from the Plasma Display, immediately unplug the power supply plug from the wall outlet.

• If you continue to use the Plasma Display in this condition, ﬁ re or electric shock could result. After checking that the smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Plasma Display yourself is extremely dangerous, and shall never be done.

If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet becomes damages, disconnect the power supply plug immediately.

• A short circuit may occur, which could cause ﬁ re. Contact your local Panasonic dealer for any repairs that need to be made.

Safety Precautions

CAUTION

When using the Plasma Display

Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display.

• Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.

Be sure to disconnect all cables before moving the Plasma Display.

• If the Plasma Display is moved while some of the cables are still connected, the cables may become damaged, and ﬁ re or electric shock could result.

Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it becoming dusty.

• If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in ﬁ re. Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.

This Plasma Display radiates infrared rays, therefore it may affect other infrared communication equipment. Install your infrared sensor in a place away from direct or reﬂ ected light from your Plasma Display.

Cleaning and maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

• Do not scratch or hit the surface of the panel with ﬁ ngernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

• Do not allow any detergent to come into direct contact with the surface of the Plasma Display. If water droplets get inside the unit, operating problems may result.

• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

Accessories

Accessories Supply

Check that you have the accessories and items shown

Operating Instruction book

Power supply cord

Remote Control Transmitter EUR7636090R

I Year Guarantee Registration

Remote Control Batteries

Fixing bands × 2

CRM (Customer Relationship Management)

Batteries for the Remote Control Transmitter (2 × R6 (UM3) Size)

Requires two R6 batteries.

1. Pull and hold the hook, then open the battery cover.

2. Insert batteries - note correct polarity ( + and -).

“R6 (UM3)” size

3. Replace the cover.

Helpful Hint:

For frequent remote control users, replace old batteries with Alkaline batteries for longer life.

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Disposal of batteries should be in an environment-friendly manner.

Observe the following precaution:

1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

Battery replacement is necessary when remote control acts sporadically or stops operating the Plasma Display set.

Connections

When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. (Example: TH-42PS9BK)

Speakers (Optional accessories)

SPEAKERS Terminals (L)

SPEAKERS Terminals (R)

AC cord connection (see page 12)

– AC cord ﬁ xing

1. Open the clamper.

Clamper

2. Insert the AC cord and close the clamper securely.

AC cord

3. Slide up the clamper and ﬁ x the AC cord plug securely.

When loosen the clamper:

Note: The power plug in the illustration may not be the type ﬁ tted to your set.

– Cable ﬁ xing bands Secure any excess cables with bands as required.

Pass the attached cable ﬁ xing band through the clip as shown in the ﬁ gure.

To secure cables connected to Terminals, wrap the cable ﬁ xing band around them then pass the pointed end through the locking block, as shown in the ﬁ gure.

While ensuring there is sufﬁ cient slack in cables to minimize stress (especially in the power cord), ﬁ rmly bind all cables with the supplied ﬁ xing band.

To tighten: To loosen:

4. Insert the point of the

ﬁ xed clamper into the small hole on the lower

right of the back cover as necessary.

AUDIO

S VIDEO

AV I NBA

SLOT1

Dual Video Terminals (see page 11)

VIDEO

SLOT2 SLOT3

Optional Terminal Board Insert Slot (covered)

Note:

At factory shipment, Terminal board is installed in SLOT 1 only.

Pull

From EXTERNAL monitor terminal on Computer (see page 9)

Push the catch

Pull

AUDIO

SERIALPC IN

From SERIAL Terminal on Computer (see page 10)

PC Input Terminals connection

COMPUTER

TH-42PS9

Conversion adapter (if necessary)

RGB

PC cable

Connections

AUDIO

PC IN

Mini D-sub 15p

Audio

Connect a cable which matches the audio output terminal on the computer.

Stereo plug

Notes:

• Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input Terminal.

• Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

• The display resolution is a maximum of 640 × 480 dots (TH-42PS9BK/S), 768 × 768 dots (TH-42PH9BK/S), 1,024 × 768 dots (TH-50PH9BK/S) when the aspect mode is set to “4:3”, and 852 × 480 dots (TH-42PS9BK/S), 1,024 × 768 dots (TH-42PH9BK/S), 1,366 × 768 dots (TH-50PH9BK/S) when the aspect mode is set to “16:9”. If the display resolution exceeds these maximums, it may not be possible to show ﬁ ne detail with sufﬁ cient clarity.

• The PC input terminals are DDC1/2B-compatible. If the computer being connected is not DDC1/2B-compatible, you will need to make setting changes to the computer at the time of connection.

• Some PC models cannot be connected to the set.

• There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.

• The computer shown in the illustration is for example purposes only.

• Additional equipment and cables shown are not supplied with this set.

• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speciﬁ ed frequency range.

• To use sync input VBS signals, use the connector which incorporates a 75-ohm termination resistance and which is available on the market, for the connection of the HD connector where the VBS signals are to be input.

Signal Names for Mini D-sub 15P Connector

Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name

1514131211

67839

Pin Layout for PC Input Terminal

R (PR/CR)

B (PB/CB)

NC (not connected)

GND (Ground)

G (Y)

GND (Ground)

NC (not connected)

GND (Ground)

NC (not connected)

HD/SYNC

SDA

SCL

Connections

SERIAL Terminals connection

The SERIAL terminal is used when the Plasma Display is controlled by a computer.

COMPUTER

RS-232C Straight cable

SERIAL

Pin layout for RS-232C

9876

53214

D-sub 9p

Notes:

• Use the RS-232C cable to connect the computer to the Plasma Display.

• The computer shown is for example purposes only.

• Additional equipment and cables shown are not supplied with this set.

The SERIAL terminal conforms to the RS-232C interface speciﬁ cation, so that the Plasma Display can be controlled by a computer which is connected to this terminal. The computer will require software which allows the sending and receiving of control data which satisﬁ es the conditions given below. Use a computer application such as programming language software. Refer to the documentation for the computer application for details.

Communication parameters

Signal level RS-232C compliant

Synchronization method Asynchronous

Baud rate 9600 bps

Parity None

Character length 8 bits

Stop bit 1 bit

Flow control -

D-sub 9-pin female Details

RS-232C Conversion cable

2 3 5

• 7 8

•

R X D

T X D

GND

Non use

Shorted

Basic format for control data

The transmission of control data from the computer starts with a STX signal, followed by the command, the parameters, and lastly an ETX signal in that order. If there are no parameters, then the parameter signal does not need to be sent.

STX C1 C2 C3 P1 P2 P3 P4: P5 ETX

Start (02h)

Colon Parameter(s) 3-character command (3 bytes)

(1 - 5 bytes)

End (03h)

Notes:

• If multiple commands are transmitted, be sure to wait for the response for the ﬁ rst command to come from this unit before sending the next command.

• If an incorrect command is sent by mistake, this unit will send an “ER401” command back to the computer.

Command

Command Parameter Control details PON None Power ON POF None Power OFF AVL

AMT

IMS None

DAM None

** 0 Audio mute OFF

1 Audio mute ON

SL1 SL2 SL3 PC1

NORM ZOOM FULL JUST SELF

Volume 00 - 63

Input select (toggle) Slot1 input Slot2 input Slot3 input PC input

Screen mode select (toggle) 4 : 3 Zoom 16 : 9 Just Panasonic Auto

With the power off, this display responds to PON command only.

AV connection

Connections

Example of input signal source

S VIDEO VCR

AUDIO

S VIDEO

AV I N

SLOT1

VIDEO

CAMCORDER

VCR

AUDIO

OUT

S VIDEO

OUT

RL AUDIO

OUT

VIDEO

OUT

Note:

Additional equipment, cables and adapter plugs shown are not supplied with this set.

SLOT3SLOT2

PC IN

Power On / Off

TH-42PS9

Connecting the AC cord plug to the Plasma Display.

Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 8)

Connecting the plug to the Wall Outlet

Note:

Main plug types vary between countries. The power plug shown at right may, therefore, not be the type ﬁ tted to your set.

TH-42PS9

INPUT MENU ENTER/+/VOL-/

Press the Power switch on the Plasma Display to turn the set on: Power-On.

Power Indicator: Green

Example: The screen below is displayed for a while after the

Plasma Display is turned on. (setting condition is an example.)

When the Power is turned on for the ﬁ rst time, the Language selection screen is displayed.

From the second time on, language selection can be done from the setup menu. (see page 13)

OSD Language

English (UK)

Deutsch

Français

Italiano

Español

ENGLISH (US)

Select the desired language using the or button and press the ACTION ( )

Русский

button.

Power Indicator

Remote Control Sensor

From the second time on, the below screen is displayed for a while (setting condition is an example).

16:9

SetSelect

Press the button on the remote control to turn the Plasma Display off.

Power Indicator: Red (standby)

Press the button on the remote control to turn the Plasma Display on.

Power Indicator: Green

Turn the power to the Plasma Display off by pressing the switch on the unit, when the Plasma Display is on or in standby mode.

Note:

During operation of the power management function, the power indicator turns orange in the power off state.

Initial selections

INPUT MENU ENTER/

/VOL-/

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.

Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display.

Input signals will change as follow:

INPUT1 INPUT2 PC ININPUT3

Notes:

• Selecting is also possible by pressing the INPUT button on the unit.

• Input terminal will not be selected if the terminal board is not installed into the SLOT.

• Select to match the signals from the source connected to the component/RGB input terminals. (see page 37)

• In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.

Selecting the On-Screen Menu Language

Press to display the Setup menu.

Press to select the OSD Language.

Press to select your preferred language.

TH-42PS9

INPUT MENU ENTER/+/VOL-/

Selectable languages

English(UK)

Deutsch

Français

Italiano

Español

ENGLISH(US)

.......(Chinese)

.......(Japanese)

Русский

.......(Russian)

Setup

Component/RGB-in select

Input label

Power save Standby save Power management Auto power off OSD Language English (UK

Signal

RGB

PC Off Off Off Off

1/2

)

Basic Controls

Remote control sensor

TH-42PS9

INPUT MENU ENTER/

Main Power On / Off Switch

Power Indicator

The Power Indicator will light.

• Power-OFF .... Indicator not illuminated (The unit

will still consume some power as long as the power cord is still inserted into the wall outlet.)

• Standby .......... Red

• Power-ON ...... Green

• DPMS .............Orange (With PC input signal

and during operation of PC’s screensaver.)

Volume Adjustment

Volume Up “+” Down “–” When the menu screen is displayed: “+”: press to move the cursor up “–”: press to move the cursor down (see page 16)

/VOL

Enter / Aspect button

(see page 16, 18)

MENU Screen ON / OFF

Each time the MENU button is pressed, the menu screen will switch. (see page 16)

Normal Viewing Picture Setup

Sound Pos. /Size

INPUT button

(INPUT1, INPUT2, INPUT3 and PC IN selection) (see page 13)

SURROUND button

The surround setting switches on and off each time the SURROUND button is pressed. The beneﬁ ts of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema.

Note:

The surround settings are memorized separately for each Sound Mode (Normal, Dynamic, Clear).

On Off

N button (see page 19, 22, 23, 24)

POS. / SIZE button (see page 19)

PICTURE button (see page 22)

INPUT button (INPUT1, INPUT2, INPUT3 and PC IN selection)

Press to select INPUT1, INPUT2, INPUT3 and PC IN input SLOTS sequentially. (see page 13)

Sound mute On / Off (see page 24)

Numeric buttons (see page 36, 42)

ASPECT button

Press to adjust the aspect. (see page 18)

MULTI Window buttons (see page 20)

Surround

Basic Controls

Standby (ON / OFF) button

The Plasma Display must ﬁ rst be plugged into the wall outlet and turned on at the power switch (see page 12). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode.

POSITION buttons

ACTION button

Press to make selections.

SOUND button

(see page 24)

R button (see page 17) Press the R button to return to previous menu screen.

Status button

Press the “Status” button to display the current system status.

4:3

Off timer 90

Input label

Aspect mode (see page 18)

Off timer

The off timer indicator is displayed only when the off timer has been set.

SET UP button (see page 16, 17)

DIRECT INPUT buttons

Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the PC input mode. This button is used to switch directly to INPUT mode. These buttons can only display the slot which is installed. If you press the button whose slot is not installed, it automatically displays the current input signal.

Note:

After-image (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent after-image (see page 44), this function is not the perfect solution to after-image.

Channel Adjustment

This button cannot be used for this model.

Volume Adjustment

Press the Volume Up “+” or Down “–” button to increase or decrease the sound volume level.

OFF TIMER button

The Plasma Display can be preset to switch to stand-by after a ﬁ xed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed.

30 60

When three minutes remain, “OFF TIMER 3” will ﬂ ash. The off timer is cancelled if a power interruption occurs.

Remote ID lock (see page 36)

Digital Zoom (see page 25)

Press to access Digital Zoom.

This displays an enlargement of the designated part of the displayed image.

+ 33 hidden pages