Televisión de alta definición de 1080p y
clase 60”/65” de Plasma
(60,1/64,7 pulgadas medidas diagonalmente)
Model No.
Número de modelo
TC-P60GT30
TC-P65GT30
For assistance (U.S.A./Puerto Rico), please call:
1-877-95-VIERA (958-4372)
www.panasonic.com/help
For assistance (Canada), please call:
1-866-330-0014
www.vieraconcierge.ca
Para solicitar ayuda (EE.UU./Puerto Rico), llame al:
1-877-95-VIERA (958-4372)
www.panasonic.com/help
English
Español
Thank you for purchasing this Panasonic product.
Please read these instructions before operating your set and retain them for future
reference. The images shown in this manual are for illustrative purposes only.
Gracias por su decisión de comprar este producto marca Panasonic.
Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en
el futuro. Las imágenes mostradas en este manual tienen solamente fines ilustrativos.
TQB2AA0616-2
Experience an amazing level of
multimedia excitement
Enjoy rich multimedia
VCR
Amplifier with
Speaker system
USB device
DVD recorder/
Blu-ray Disc recorder
SD memory card
DVD player/
Blu-ray Disc player
Camcorder
■Do not display a still picture for a long time
This causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is not covered by the warranty.
4 : 3
12
To prevent the “Image retention”, the screen saver is
automatically activated after a few minutes if no signals are
sent or no operations are performed.
Personal computer
Cable box
Typical still images
Channel number and other logos
●
Image displayed in 4:3 mode
●
SD Card photo ●Video game ●Computer image
●
■Set up
Do not place the unit where it’s exposed to sunlight or other bright light (including reflections).
●
Use of some types of fluorescent lighting may reduce the remote control’s transmission range.
●
2
VIERA Link™ is a trademark of
Panasonic Corporation.
HDMI, the HDMI logo and HighDefinition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing LLC in the United
States and other countries.
Contents
SDXC Logo is a trademark of SD3C, LLC.
“AVCHD” and the “AVCHD” logo
are trademarks of Panasonic
Corporation and Sony Corporation.
“RealD 3D” is a trademark of RealD.
This product is covered by U.S.
Patent 5,193,000 until August 28,
2011.
DLNA®, the DLNA Logo and DLNA
CERTIFIED™ are trademarks,
service marks, or certification
marks of the Digital Living Network
Alliance.
QuickTime and the QuickTime
logo are trademarks or registered
trademarks of Apple Inc., used
under license therefrom.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
HDAVI Control™ is a trademark of Panasonic Corporation.
Skype™ is a trademark of Skype limited.
TM
This product is licensed under the AVC patent portfolio
license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC
Standard (“AVC Video”) and/or (ii) decode AVC Video
that was encoded by a consumer engaged in a personal
and non-commercial activity and/or was obtained from a
video provider licensed to provide AVC Video. No license
is granted or shall be implied for any other use. Additional
informa tion may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
Index ·····························································65
•
Limited Warranty
•
(for U.S.A. and Puerto Rico only) ·················66
Customer Services Directory
•
(for U.S.A. and Puerto Rico) ·························67
Limited Warranty (for Canada) ·····················68
•
Getting started
BasicAdvancedSupport Information
3
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
WARNING:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).
DO NOT OPEN
Important Safety Instructions
11) Only use attachments / accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart / apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the
AC cord power plug is securely connected.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a risk
of electric shock to persons.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance.
WARNING
Small parts can present choking hazard if accidentally
swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/sheets to
prevent them from being played with by young children,
creating the potential risk of suffocation.
■Set up
This Plasma TV may fall and can cause personal injury or
even death if not installed correctly. To prevent personal
injury or death, follow these warnings:
Install the Plasma TV in accordance with the
●
manufacturer’s recommended pedestal or stand,
corresponding hardware and installation instructions.
This Plasma TV is for use only with the following
optional accessories. Use with any other type of optional
accessories may cause instability. The following accessories
are manufactured by Panasonic Corporation.
Be sure to ask a qualified technician to carry out the
●
installation and set-up.
Two or more people are required to install or remove the
television.
Some wall mounts (wall-hanging brackets) are not
●
designed to be mounted to walls with steel studs or old
cinder block constructions.
Ask your dealer or licensed contractor to properly secure
the wall-hanging bracket.
Do not route the TV’s power cord inside the wall.
●
The power cord was not designed for in-wall mounting.
Doing so can lead to fire hazard.
Do not place the Plasma TV or its stand on a sloped or
●
unstable surface.
The Plasma TV may fall or tip over.
Do not support the Plasma TV on a non-specified
●
pedestal.
Do not place the Plasma TV on furniture that can easily
●
be used as steps, such as a chest of drawers.
Do not climb or allow children to climb on the Plasma TV
●
Place or install the Plasma TV where it cannot be
●
pushed, pulled over or knocked down.
Route all cords and cables such that they cannot be
●
tripped over or pulled by curious children.
Do not place any objects on top of the Plasma TV.
●
If water spills onto the Plasma TV or foreign objects get
inside it, a short-circuit may occur which could result in
fire or electric shock. If any foreign objects get inside the
Plasma TV, please consult an Authorized Service Center.
In the unlikely event that you receive a shock from this
product it is possible that your household outlet may be
wired improperly. Have an electrician verify that the TV’s
outlet is properly wired. If the symptom persists, have the
TV serviced by a qualified authorized technician.
To prevent the spread of fire, keep candles
●
or other open flames away from this
product at all times
■AC Power Supply Cord
To prevent fire or electric shock:
The Plasma TV is designed to operate on a 120 V AC,
●
60 Hz service. Insert the power cord plug as far as it will
go into the wall socket.
If the plug is not fully inserted, heat may generate, which
could cause a fire.
The included power cord is for use with this unit only.
●
Do not use any power cord other than that provided
●
with this TV.
Do not handle the power cord plug with wet hands.
●
Do not do anything that might damage the power
●
supply cord.
When disconnecting the power supply cord, hold the
●
plug, not the cord.
Do not use the power supply cord if the plug or cord is
●
damaged.
Replace the cord or contact your Authorized Service Center.
Do not use a 3-prong to 2-prong AC plug adapters to
●
connect your TV’s plug to the wall outlet.
Doing so will defeat the TV plug’s safety feature, which
can lead to a shock hazard. If the wall outlet does not
accommodate a 3-prong plug, have a qualified electrician
replace your outlet and check the associated wiring.
■Handling the power supply cord
Insert the power plug fully into the socket outlet. (If the
●
power plug is loose, it could generate heat and cause fire.)
Ensure that the power plug is easily accessible.
●
Ensure the earth pin on the power plug is securely
●
connected to prevent electrical shock.
• An apparatus with CLASS I construction shall be
connected to a power socket outlet with a protective
earthing connection.
Do not touch the power plug with a wet hand. (This may
●
cause electrical shock.)
Do not use any power cord other than that provided
●
with this TV. (This may cause fire or electrical shock.)
Do not damage the power cord. (A damaged cord may
●
cause fire or electrical shock.)
• Do not move the TV with the cord plugged in the socket outlet.
• Do not place a heavy object on the cord or place the cord
near a high-temperature object.
• Do not twist the cord, bend it excessively, or stretch it.
• Do not pull on the cord. Hold onto the power plug body
when disconnecting cord.
• Do not use a damaged power plug or socket outlet.
If a problem occurs (such as no picture or no sound),
●
or if smoke or an abnormal odor is detected from the
Plasma TV, unplug the power supply cord immediately.
Continued use of the TV under these conditions might
cause a fire or permanent damage to the TV. Have the TV
evaluated by an Authorized Service Center. Servicing of the
TV by unauthorized personnel is strongly discouraged due
to its high voltage.
If water or an object gets inside the Plasma TV, if the
●
Plasma TV is dropped, or if the enclosure becomes
damaged, unplug the power supply cord immediately.
A short-circuit may occur, which could cause a fire. Contact
an Authorized Service Center for an evaluation.
CAUTION
Do not cover the ventilation holes.
●
Doing so may cause the Plasma TV to overheat, which can
cause a fire or damage to the Plasma TV.
Leave a space of 3 15/16” (10 cm) or more at the top,
●
left and right, and 2 3/4” (7 cm) or more at the rear.
When using the pedestal, keep the space between the
●
bottom of the TV and the pedestal or stand surface
clear from objects that may obstruct ventilation.
■When Moving the Plasma TV
Be sure to disconnect all cables before moving the
●
Plasma TV.
Moving the TV with its cables attached might damage the
cables which, in turn, can cause fire or electric shock.
To prevent an electric shock, disconnect the power
●
plug from the wall outlet as a safety precaution before
carrying out any cleaning.
Transport only in upright position.
●
Transporting the unit with its display panel facing upright or
downward may cause damage to the internal circuitry.
Using a dry cloth, clean any dust from the power supply
●
cord and plug regularly.
Build-up of dust on the power cord plug can increase
humidity, which might damage the insulation and cause a
fire.
This Plasma TV radiates infrared rays;
therefore, it may affect other infrared communication
equipment. Install your infrared sensor in a place away from
direct or reflected light from your Plasma TV.
The TV will still consume some power as long as the
power supply cord is connected to the wall outlet.
Display panel is made of glass. Do not apply strong
●
force or impact to the display panel.
This may cause damage resulting in injury.
The TV is heavy. TV should be handled by 2 or more
●
people. Support as shown to avoid injury by the TV
tipping or falling.
5
WARNING/CAUTION (3D Eyewear)
WARNING
■About Prevention of Accidental Ingestion
Do not store batteries, the band accessory or nose
●
pads in places where small children can reach.
There is a danger small children could swallow such parts
by mistake.
• If a child accidentally swallows such parts, seek
immediate medical attention.
■About Prohibition of Disassembly
Do not disassemble or modify the 3D Eyewear.
●
■About lithium battery
Batteries must not be exposed to excessive heat such
●
as sunshine, fire or the like.
CAUTION
■About 3D Eyewear
Do not drop, exert pressure on, or step on the 3D
●
Eyewear.
Doing so may damage the glass section, which may result
in injury.
• Always store the 3D Eyewear in the case provided when
not in use.
Be careful of the tips of the frame when putting on the
●
3D Eyewear.
Accidentally inserting the tip of the frame into the eye may
cause injury.
Be careful not to trap a finger in the hinge section of the
●
3D Eyewear.
Doing so may result in injury.
• Pay special attention when children are using this product.
■About Use of 3D Eyewear
Parents/guardians should monitor children’s viewing
●
habits to avoid their prolonged use without rest
periods.
Use only the 3D Eyewear recommended for this TV.
●
Only use the 3D Eyewear for the specified purpose.
●
Do not move around while wearing the 3D Eyewear.
●
The surrounding area appears dark, which may result in
falling or other accidents that may cause injury.
■About Viewing of 3D Images
In the event that you experience dizziness, nausea, or
●
other discomfort while viewing 3D images, discontinue
use and rest your eyes.
• When you set the effect by using “3D adjustment”, take
into account that the vision of 3D images varies among
different individuals.
Do not use if the 3D Eyewear is cracked or broken.
●
■About lithium battery
Danger of explosion if battery is incorrectly replaced.
●
Replace only with the same or equivalent type.
CEA CHILD SAFETY NOTICES
WARNING
Flat panel displays are not always supported on the
proper stands or installed according to the manufacturer’s
recommendations. Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers,
chests or carts may fall over and may cause personal injury or
even death.
The consumer electronics industry (of which Panasonic is
a member) is committed to making home entertainment
enjoyable and safe. To prevent personal injury or death, be
sure to follow the following safety guidelines:
TUNE INTO SAFETY:
• One size does NOT fit all. Follow the manufacturer’s
recommendations for the safe installation and use of your
flat panel display.
• Carefully read and understand all enclosed instructions for
proper use of this product.
• Don’t allow children to climb on or play with furniture and
television sets.
• Don’t place flat panel displays on furniture that can easily be
used as steps, such as a chest of drawers.
• Remember that children can become excited while watching
a program, especially on “larger than life” flat panel
displays. Care should be taken to install the display where it
cannot be pushed, pulled over, or knocked down.
• Care should be taken to route all cords and cables
connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT
YOUR FLAT PANEL DISPLAY, ALWAYS:
• Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory
(such as UL, CSA, ETL).
• Follow all instructions supplied by the display and wall
mount manufacturers.
• If you have any doubts about your ability to safely
install your flat panel display, contact your retailer about
professional installation.
• Make sure the wall where you are mounting the display
is appropriate. Some wall mounts are not designed to
be mounted to walls with steel studs or old cinder block
construction. If you are unsure, contact a professional
installer.
• A minimum of two people are required for installation. Flat
panel displays can be heavy.
Panasonic recommends that a qualified installer perform
the wall-mount installation. See page 4.
The American Academy of Pediatrics discourages
television viewing for children younger than two years
of age.
6
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the Panasonic Service Center or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of
North America could void the user’s authority to operate this device.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Declaration of Conformity
Model No. TC-P60GT30, TC-P65GT30
Responsible Party:Panasonic Corporation of North America
Contact Source:Panasonic Consumer Electronics Company
email:consumerproducts@panasonic.com
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz
and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe.
Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce
heating effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological
effects might occur, but such findings have not been confirmed by additional research.
Product Identification Marking is located on the bottom of the Wireless LAN Adapter.
CANADIAN NOTICE:
For Model TC-P60GT30, TC-P65GT30
This Class B digital apparatus complies with Canadian ICES-003.
In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed
●
contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to prevent
●
the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
●
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the
●
wall before hanging the bracket.
When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting
●
cables not to press against the wall when the TV is tilted forward.
For safety reasons, remove units no longer being used from their wall-mounted locations.
●
TY-WK6P1RW (for 65”)
●
a: 26.9” (684 mm)
b: 11.8” (300 mm)
Pedestal
TBL5ZX0058 (TC-P60GT30)
How to assemble
(p. 9)
Please contact your nearest Panasonic dealer to purchase the recommended
Optional accessories. For additional details, please refer to the Optional
accessories installation manual.
•
Product information (Model No. and release date etc.) is subject to change without notice.
• For more product information
(USA) http://www.panasonic.com (Canada) http://panasonic.ca
(Global reference) http://panasonic.net/avc/viera/3d/
• This camera can be used on VIERA Connect.
• For details, read the manual of the Communication Camera.
Rear of the TV
a
Holes for wall-hanging
bracket installation
Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)
b
(View from the side)
TBL5ZX0169 (TC-P65GT30)
Depth of screw:
minimum 0.39” (10.0 mm),
maximum 0.63” (16.0 mm)
M8
8
Attaching the pedestal to TV
■
Assembling the pedestal
[TC-P60GT30]
Fix securely with assembly screws
(Total 4 screws).
Tighten screws firmly.
A
Front
■
Set-up
Carry out work on a horizontal and level surface.
Tighten assembly screws B (total 4 screws) loosely at first,
then tighten them firmly to fix securely.
B
Arrow
mark
[TC-P65GT30]
A
Fix securely with assembly screws
(Total 6 screws).
Tighten screws firmly using Allen
wrench
Bottom view
Rear side
A
C
.
A
C
Front
Accessories
Assembly screws
A
THEL090N (for 60”)
size (M5 x 25) (Black) (4)
THEL093J (for 65”)
size (M5 x 30) (Black) (6)
B
THEL090N (for 60”)
size (M5 x 25) (Black) (4)
XYN6+F25FJK (for 65”)
size (M6 x 25) (Black) (4)
Poles (2)
(for 60”)
L
R
Getting started
Accessories/Optional Accessories
Arrow
mark
Base
(Image: TC-P60GT30)
Hole for pedestal
installation
Pole
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall
hanging bracket or repacking the TV.
Remove the assembly screws B from the TV.
Pull out the TV from the pedestal.
Remove the assembly screws A from the pole.
or R is printed at the
L
●
front of the poles.
(for 65”)
Base (1)
(for 60”)
(for 65”)
Allen wrench
(included tool only for 65”)
C
9
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (p. 9)
Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result.
Installing the remote’s batteries
Caution
Incorrect installation may cause
battery leakage and corrosion,
resulting in damage to the remote
control.
Do not mix old and new batteries.
•
Do not mix different battery types (such
•
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)
•
batteries.
Do not burn or break batteries.
Hook
Close
Pull open
Note the correct
polarity (+ or -).
10
Connections
Connection Panels
Back of the TV
USB1
terminal
LAN
connector
PC
terminal
Back of the TV
SD card
slot (p.26)
USB2/3
terminal
DIGITAL
AUDIO
OUT
Antenna or Cable connection
a
Antenna adapter
Accessories
Antenna adapter (1)
K1TYYYY00158
●
a
VIDEO adapter (1)
K2KYYYY00136
●
b
Component adapter (1)
K2KYYYY00137
●
c
Audio adapter (1)
K2KYYYY00138
●
d
Optical adapter (1)
K7CXGYC00002
●
e
PC adapter (1)
K1HY20YY0007
●
f
VHF/UHF Antenna
Getting started
Connections
Accessories/Optional Accessories
Cable TV
Power Cord
(Connect after all the
other connections have
been made.)
VHF/UHF Antenna
• NTSC (National Television System Committee):
ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV), standard-definition television
(SDTV), data broadcasting, multichannel surround-sound audio and interactive television.
Cable
You need to subscribe to a cable TV service to enjoy viewing their programming.
●
You may need to subscribe to a high-definition (HD) cable service to enjoy HD programming.
●
The connection for high-definition can be done with the use of an HDMI or Component Video cable. (p. 12)
Note
When using a Cable box, external equipment and video cables shown in this manual are not supplied with the TV.
●
When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first.
●
For additional assistance, visit us at: www.panasonic.com/help
●
www.panasonic.ca
or
11
AV cable connection
Best
Good
Basic
(Not HD)
To use HDMI terminals
HDMI-DVI
Conversion cable
whitewhite
d
VIERA Link connection, please refer to p. 33
●
The HDMI connection is required for a 1080p signal.
●
redred
Audio adapter
To use COMPONENT terminals
c
Component adapter
d
Audio adapter
green
white
blue
red
red
green
blue
red
white
red
To use COMPOSITE terminals
green
blue
red
white
red
green
blue
red
white
red
Y
P
PR
L
R
HDMI
AV OUT
DVI OUT
L
AUDIO OUT
R
B
COMPONENT
VIDEO OUT
AUDIO
OUT
AV Equipment
e.g. Blu-ray Disc
player
AV Equipment
e.g. Blu-ray Disc
player
AV Equipment
e.g. Blu-ray Disc
player
12
b
VIDEO adapter
yellow
white
red
yellow
white
red
yellow
white
red
yellow
white
red
L
COMPOSITE
OUT
R
AV Equipment
e.g. DVD Recorder
or
e.g. VCR
Audio connection
e
Optical adapter
For HDMI-ARC (Audio Return Channel) connection, see p. 32
●
Optical cable
PC / Computer connection (VGA)
Audio cable
RGB PC cable
f
PC adapter
d
Audio adapter
white white
red red
Cable Binding Instructions
DIGITAL
AUDIO IN
Connect cable which matches the
audio out terminal on the computer
Audio OUT
PC OUT
Conversion adapter
(if necessary)
Audio equipment
e.g. Amplifier
Getting started
Computer
Connections
To attach
Cable clamper
To bundle
hooks
Do not bundle the Antenna cable and AC cord together (could cause distorted image).
●
Fasten the cables with the Cable clamper as necessary.
●
When using the options, follow the option’s assembly manual to fix cables.
●
hole
Insert
Set
To remove
To loosen
knob
Snaps
Keep pushing
both sides till
they snap
Keep pushing
the knob
13
Identifying Controls
TV controls/indicators
Front of the TVBack of the TV
Remote control sensor
POWER
button
Note
The TV consumes a small amount of electric energy even when turned off.
●
Do not place any objects between the TV remote control sensor and remote control.
Exits from Menu screen
VIERA Link menu (p. 36-37)
Displays VIERA Connect (includes VIERA
CAST) Home screen (p. 43)
Displays VIERA TOOLS menu (p. 22)
Selects/OK/Change
Go back to previous menu
Channel up/down, when viewing from ANT/
Cable source
Sound Mute On/Off
Changes aspect ratio and zoom
(p. 20, 55)
Switches to previously viewed
channel or input
External equipment operations
(p. 37)
14
Displays or removes the channel banner (p. 19)
Operates the Favorite channel list function
(p. 20)
Numeric keypad to select any channel or
press to enter alphanumeric input in menus
Use for digital channels (p. 19)
First Time Setup
The first time setup screen is displayed only when the TV is turned on for the first time after the power cord
is inserted into a wall outlet and when “Auto power on” (p. 53) is set to “No”.
Turn the TV On with the POWER button
(Remote)(TV)
or
Configure your viewing mode
Select your language
Language / Idioma / Langue
Select your language
Seleccione su idioma
Sélection de la langue
EnglishEspañolFrançais
or
Getting started
Step 1 of 7 / Paso 1 de 7 / Étape 1 de 7
select
OK
OK
Select
Selección
Sélection
Select your country
Country
Select the country where this TV is being used.
U.S.A.CanadaOther
Step 2 of 7
select
First Time Setup
Identifying Controls
OK
OK
Select
RETURN
Select your viewing mode (Be sure to select “Home use”)
Set viewing mode
Select your viewing environment
Home useStore Demonstration
Step 3 of 7
select
OK
OK
Select
RETURN
Please confirm your selection (Home Use) before pressing OK button.
●
■If you select “ Store Demonstration” by mistake in ,
confirmation screen will be displayed.
You are selecting the store demonstration mode.
Yes
If you select “Yes”, the picture mode will regularly reset
to “Vivid” and a Picture Refresh message will be displayed on the
screen.
Select “No” and return to previous screen
●
If you select “Yes”, Screen enters the store demonstration mode.
●
To display the “Set viewing mode” screen again as shown above and
select “Home Use”, do one of the following:
• Press and hold down the front POWER button for at least five seconds.
• Unplug power cord for 30 seconds and plug it again.
No
select
OK
Note
If you use any other step other than
●
then turn the TV off, or if you used
the EXIT button to quit before completing the settings, the next time you turn
the TV on, “First time setup” will not be automatically displayed.
• The settings up to that point are saved.
• You can start “First time setup”. (p. 53)
Language, ANT/Cable setup, Input labels, and Clock can also be changed
●
in the Settings Menu. (p. 53)
15
Press to exit from
RETURN
OK
Select
1
@.
4
GHI
7
PQRS
2
ABC
5
JKL
8
TUV
3
DEF
6
MNO
9
WXYZ
0
- ,
LAST
ABC abc
GAME
Video
PC
GAME
a menu screen
Press to go back to
the previous screen
Note
About broadcasting
systems
Analog (NTSC):
Conventional
broadcasting
Digital (ATSC):
New programming
that allows you
to view more
channels featuring
high-quality video
and sound
ANT/Cable setup
Do you use a Cable, Satellite or Fiber Optic box with this TV?
ANT/Cable setup
Do you use a Cable, Satellite or Fiber Optic box with this TV?
YesNo
OK
Select
Return
aSelect signal type
(Cable/Antenna)
ANT/Cable setup
How does the TV receive its programming content?
Cable service
Over-the-Air Antenna
(No box)
OK
Select
Return
Select scan type
Auto program
Start scanning for available channels in your area?
YesNo
No
Antenna
Cable In
Step 4 of 7
Step 4 of 7
Step 4 of 7
Yes
select
OK
select
b
Select connection type
for Cable or Satellite box
and go to
ANT/Cable setup
Which wiring method is used to connect your box to the TV?
VIDEO IN
HDMI
Component
Composite
OK
Select
Return
OK
OK
Select
Return
Yes
Start scanning
Auto program
Progress
Number of analog channels
Number of digital channels
This may take some time to complete.
Press RETURN to quit
RETURN
Complete scanning
Auto program completed.
Press OK to continue.
Number of analog channels
Number of digital channels
OK
RETURN
1%
0
10
20
Label the inputs for easy identification (Label inputs)
To name each input, follow the instructions on screen.
When done, select NEXT and press OK to go to the next step.
Label inputs
What is connected to HDMI 1 ?
For your convenience, you may name each input for easy identification.
The labels will be shown in the “Input select” menu.
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Component
Video
PC
Next
OK
Select
Return
Customize label
--> To edit the labels to match your connected devices.
THTR/RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/
MONITOR/AUX/OTHER/Not used
• Select “Not used” for any back-panel input that has no device connected to it.
Afterward, the input will be skipped when pressing INPUT, for your convenience.
• The input labels can be changed at any time from the TV’s setup menu
Step 5 of 7
HDMI
select
set
or
Follow the instructions on
screen to complete the
following operations.
(Input labels)
Step 4 of 7
Antenna/Cable in
Antenna
Cable In
16
Configure Network settings
RETURN
OK
0 9
DST
Minutes
10
Select the Network type
Network settings
Select Ethernet cable of wireless network.
Ethernet cable Wireless(Wifi) Set later
OK
Select
Return
Select the setting mode
Network settings
Checks for proper network connection, settings and
communication to the Internet and server
automatically.
AutomaticManual
Step 6 of 7
Step 6 of 7
Set later: Go to
You can set in “Setup” menu later.
Wireless (WiFi)
Automatic: Press OK to start setup automatically.
Error screen is displayed when
Manual: Go to Manual setting.
: Start “Wireless network” (p. 18)
Network connection has failed.
Press to exit from
a menu screen
■
Press to go back to
the previous screen
OK
Select
RETURN
Manual
Automatic
Start connection test
Network settings
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA Connect server.
Test in progress...
RETURN
Step 6 of 7
Complete “Network settings”
Connection test
Connection
error
■Manual setting
Network settings
Configure settings of the network connection.
IP setting mode
Automatic
IP address
192.168.0.4
Subnet mask
255.255.255.0
Default gateway
192.168.0.1
DNS setting mode
Automatic
DNS
192.168.0.1
Proxy address
Proxy port
Connect test
Mac address
00-00-aa-cc-33-ab
Select
Change
RETURN
Manual
Helpful information is displayed when you
successfully complete “Network settings”.
Network settings
Network settings are complete.
You can use VIERA Connect.
VIERA Connect lets you enjoy Internet contents
on your VIERA TV.
OK
Return
Step 6 of 7
■Error screen
Network settings
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA Connect server.
Connection to local network (router) failed.
Ensure wireless network availability
RetryManualSet later
OK
Select
RETURN
Retry: Go to “Start connection test”
Set later: Go to
Adjust the Clock (Set clock)
When done, select NEXT and press OK to go to the next step.
■Manual setting
Set clock
Adjust the TV's date and time
Select
Change
Mode
Year
Month
Day
Hour
Minute
Time zone
DST
Next
Edit
RETURN
0-9
Manual
- - -
- - -
- - -
- - -
- - -
Step 7 of 7
select
set
or
Follow the instructions on
screen to complete the
following operations.
■Auto setting
Set clock
Adjust the TV's date and time
2011/4/5 6:00 AM
Mode
Year
Month
Day
Hour
Minute
Time zone
DST
Next
Select
Change
RETURN
Mode
Time zone
DST
Auto
EST
Off
Manual: Adjust the clock manually (Year/Month/Day/Hour/Minute)
Auto: The clock is adjusted automatically via Internet service. Only
available when the TV is on a network. -->Set “Network settings” first.
Select your time zone. (EST/CST/MST/PST/AKST/HST/NST/AST)
Set DST (Daylight Saving Time) setting. (On/Off)
On: Advances the clock one hour from the time it is set according to the
time zone.
Step 7 of 7
Getting started
Step 6 of 7
First Time Setup
Step 6 of 7
17
Press to exit from
a menu screen
■
Press to go back to
the previous screen
Complete First time setup
Congratulations! You are done.
The First time setup can be repeated at any time.
Press MENU and select SETUP; then “First time setup”.
Congratulations!
Setup is complete.
Enjoy your Panasonic VIERA TV.
OK
RETURN
To watch TV via a Cable box, Satellite receiver, or any other source (DVD,
DVR, gaming device, etc.), press the INPUT button and select the appropriate
input.
■About wireless LAN
To use the Wireless LAN Adapter, an access point needs to be obtained.
●
For the additional information for Wireless LAN Adapters, check the following website:
http://Panasonic.com/NetConnect
It is recommended to use the Wireless LAN Adapter with the supplied extension cable.
●
Do not use the Wireless LAN Adapter to connect to any wireless network (SSID*) for which
●
you do not have usage rights. Such networks may be listed as a result of searches. However,
using them may be regarded as illegal access.
* SSID is a name for identifying a particular wireless network for transmission.
Do not subject the Wireless LAN Adapter to high temperatures, direct sunlight or moisture.
●
Do not bend, or subject the Wireless LAN Adapter to strong impacts.
●
Do not disassemble or alter the Wireless LAN Adapter in any way.
●
Do not attempt to install the Wireless LAN Adapter in any incompatible device.
●
When VIERA Connect, Network camera, DLNA, or other device is using the network, do not
●
disconnect the Wireless LAN Adapter.
Check that the Access point supports WPS*.
●
(If it does not support WPS, the encryption key of the Access point is required when
configuring settings.)
Follow the instructions on the Access point setup screen and configure the appropriate
●
security settings.
For more details on setting of Access point, please refer to operating manual for the Access point.
We recommend using 11n (5 GHz) for the wireless system between the Wireless LAN Adapter
●
and Access point.
Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the communication
speed may be slower.
If the wireless system of the Access point is changed, devices that could connect by wireless
●
LAN may no longer be able to connect.
Data transmitted and received over radio waves may be intercepted and monitored.
●
Keep the TV away from the following devices as much as possible:
●
Wireless LAN, microwaves, and other devices that use 2.4 GHz and 5 GHz signals.
Otherwise, the TV failures such as malfunction may occur due to the radio wave interference.
When noises occur due to the static electricity, etc., the TV might stop operating for the protection
●
of the devices. In this case, turn the TV Off with power On / Off switch, then turn it On again.
* WPS: Wi-Fi Protected Setup
18
■Wireless network (First time setup) in
Display “Wireless network”
Select the connection method
Wireless network
Please choose connection method:
Search for wireless networks
WPS (Wi-Fi Protected Setup using push button)
Follow the directions on screen to complete the setting.
●
See page 41 for more information.
●
select
OK
Watching TV
Turn power on
(Remote)
or
(TV)
■VIERA Connect Banner appears
Press OK/INTERNET (or VIERA CAST) button to enter VIERA Connect. (p. 43)
To hide the banner Press any button except OK/INTERNET (or VIERA CAST)
●
You can also set the banner display status (on/off) in the Setup menu. (p. 53)
●
Menu > Setup > Advanced setup > VIERA Connect Banner
button (Time-out period of this banner is 5 sec.)
Select a channel number
up
or
down
• Also available side CH button on the unit.
[For Cable/Satellite box connection]
- Use your connected box’s remote control.
Note
Reselect “Cable” or “Antenna” in “ANT in” of “ANT/Cable setup” to switch the signal
reception between cable TV and antenna. (p. 16, 46)
The channel number and volume level remain the same even after the TV is turned off.
■Other Useful Functions
Listen with SAP (Secondary Audio Programming)
■Select the Audio mode for watching TV
Digital mode
Press SAP to select next Audio track (if available) when receiving a digital channel.
Audio track 1 of 2
Analog mode
Press SAP to select the desired Audio mode.
• Each press of SAP will change the Audio mode. (Stereo/SAP/Mono)
SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.
Contact your Cable or Satellite operator for instructions on enabling SAP with their box.
(English)
Closed Caption
■Switches the Closed Caption mode On or Off
Closed caption OnClosed caption Off
Closed caption On mute
Note
Please select correct input --> (p. 23)
To directly enter the digital channel
number
When tuning to a digital channel,
press the button to enter the minor
number in a compound channel
number.
example: CH15-1:
Getting started
Basic
Watching TV
First Time Setup
Closed Caption is not available when watching TV with a Cable or Satellite box connected via HDMI.
Contact your Cable or Satellite operator for instructions on enabling CC with their box.
Displaying Information
■Displays and removes information. When watching programming via the Antenna/Cable input,
shows the channel banner.
Channel
15-212:30 PM
ABC-HD
Station
identifier
THE NEWS
CC SAP
SAP
indication
TV-G 1080i Standard 4:3
Signal
resolution
Rating Level
Picture
mode
Aspect ratioClosed caption
Clock
30
Sleep timer
remaining time
19
Change aspect ratio and Zoom the picture
Favorite channels
1/3
26-1
1
2
3
4
5
Set favorite1/3
26-1
1
2
3
4
5
Set favorite1/3
26-1
1
2
3
4
5
■Press FORMAT to cycle through the aspect modes (p. 55)
• 480i, 480p: FULL/JUST/4:3/ ZOOM
• 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM
Use when the picture does not fill the whole screen (bars appears on either side of
the image) or portions of the picture is trimmed.
Note
1. Some content, such as film-based movies, are available in extra-wide format.
Top and bottom bars are unavailable.
2. Connected devices, such as Cable/Satellite box, DVD/Blu-ray players and game
consoles have their own aspect (format) settings. Adjust the device’s aspect
settings.
Display the SUB MENU
■Press SUB MENU to show the Sub Menu screen
This menu consists of shortcuts to convenient functions.
Sub menu is only available when the TV is using the Antenna/Cable input, not when using Cable or Satellite box.
Setup SUB MENU
Channel surf mode
All
Set favorite
Edit CH caption
Signal meter
Specify favorites or type of channels to view when pressing the channel up/
down button.
Set favorite channel (below)
Edit the channel identifier (p. 47)
Check the signal strength (p. 47)
Call up a favorite channel
■ FAVORITE
Channel numbers registered in Favorite are displayed on the favorite tune screen. Select the desired broadcast
station with the cursor or use the number buttons. (p. 19)
select
■Set the Favorite channel
■Delete a favorite channel
■To change the page
20
or
Setup SUB MENU
Channel surf mode
All
Set favorite
Edit CH caption
Signal meter
Press repeatedly to change between pages (1/3, 2/3, 3/3 or exit)
Changes the page forward/backward
Favorite channels cannot be set when using Cable or Satellite box.
●
select the list
number
save the displayed
channel
or
select the list number
(to save the channel
without pressing OK)
select
delete
(while holding down)
■Other Useful operations
RETURN
1
@.
4
GHI
7
PQRS
2
ABC
5
JKL
8
TUV
3
DEF
6
MNO
9
WXYZ
0
- ,
LAST
Select
OK
DeleteABC → abc
Menu
Proxy setting
Proxy address
0
Proxy port
1 4 8
Entering characters
You can use the remote control keys to enter the alphanumeric characters.
■Switches input mode
ABC → abc → 123
↑
_____________
|
■Press each number key
to cycle through the
alphanumeric character
Navigation area
You can also use a USB keyboard (not supplied) to enter the alphanumeric characters.
●
Keyboard type (p. 53)
●
Password setting/entering
You need to enter the password when you access locked channel or inputs.
Input your 4-digit password
Menu
Password
Enter password.
* * * -
If it is your first time entering the password, enter the password twice in
●
order to register it.
Make a note of your password. Do not forget it. (If you have forgotten
●
your password, consult your local dealer.)
When you select a locked channel, a message will be displayed that
●
allows you to view the channel after you input your password.
Change password (p. 52)
●
Operate USB keyboard
You can operate non-character keys as remote control keys.
For more details on setting and operation of the USB keyboard, please also read the operating manuals for the USB
●
F11(Blue)/F12(Yellow)
Color key
(Red/Blue/Yellow/Green)
keyboard.
Some keyboards do not have these keys.
●
Basic
Watching TV
21
Using VIERA TOOLS
VIERA TOOLS is the easy way to access the TV’s special features. They are displayed as shortcut icons on
the TV screen.
Display VIERA TOOLS
Select the item
select
next
Set each item
3D
Change the view 3D⇔2D (p. 25)
Press to exit from
a menu screen
Press to go back
to the previous
screen
THX
VIERA Connect
Media player
DLNA
VIERA Link
Eco mode
Change to “THX” mode.
Picture mode (p. 49)
Displays VIERA Connect Home Screen for Enjoying
Internet Services (p. 43)
Media player (p. 26-31)
Using DLNA feature (p. 44)
VIERA Link (p. 36-37)
ECO/energy saving (p. 53)
22
Watching content from external devices
With the connected equipment turned On
Display the Input select menu
Select the input mode
Input select
1
ANT/Cable In
2
HDMI 1
3
HDMI 2
4
HDMI 3
5
HDMI 4
6
Component
7
Video
8
PC
HDMI 1
GAME
Not used
GAME
or
AUX
(example)
Input label
Setup ANT/Cable (p. 46)
Edit Device labels
Input labels (p. 53)
Terminal
Label
(example)
(shortcut) Press the
corresponding NUMBER button
on the remote control to select the
input of your choice. Or, press the
INPUT button repeatedly, to cycle
through the available inputs.
* set unused input to “Not used”
select
enter
(below) for quick skipping.
Select the input of your choice,
then press OK.
During the selection, if no action
●
is taken for several seconds,
the “Input select” menu
disappears.
The terminal and label (names)
●
of the connected equipment are
displayed.
Basic
Watching content from external devices
Using VIERA TOOLS
Note
The input label will be displayed on the “Input select” screen if the Input label was
●
customized.
■Press Game to switch to the game screen
Switches to input terminal that has “GAME” label.
Operate the connected equipment directly or using the
remote control supplied with the equipment
Note
For details, see the manual for the connected equipment.
●
PC adjustments (p. 50)
●
Cycle through the input terminals if there are
●
multiple input terminals that have “GAME” label.
(p. 53)
If there is no input terminal with “GAME” label,
●
you cannot switch the input terminal to any other
input terminal than the one currently selected.
HDMI 1
HDMI 3
Video
GAME
GAME
GAME
23
Viewing 3D images on TV
Precautions for Viewing 3D Images
Infra-red receiver section
Do not soil the infra-red receiver section or attach stickers etc. to it.
• Doing so may prevent the receiver from receiving signals from the television, which may prevent the 3D Eyewear
from operating normally.
If the 3D Eyewear is affected by other infra-red data communication equipment, the 3D images may not be displayed
correctly.
Cautions During Viewing
Do not expose the infra-red receiver section to strong light such as direct sunlight and fluorescent light. The 3D image
may not be displayed correctly.
If the 3D Eyewear is used in a room in which fluorescent lights (50 Hz) are used, the light within the room may appear
to be flickering. In this case, either darken or switch off the fluorescent lights when using the 3D Eyewear.
Wear the 3D Eyewear correctly. 3D images will not be correctly visible if the 3D Eyewear is worn upside down or backto-front.
Individual differences may occur in which the 3D images are difficult to see, or cannot be seen, especially in users that
have a different level of eyesight between the left and right eyes. Take the necessary steps (wearing glasses etc.) to
correct your eyesight before use.
For comfortable viewing
View the screen at a distance at least 3 times further than the effective height of the screen.
Recommended distance:
For a 60-inch television, 7’3” (2.3 m) or more.
For a 65-inch television, 7’10” (2.4 m) or more.
Using the 3D Eyewear at a distance closer than the recommended distance may cause eyesight fatigue.
When the top and bottom area of the screen is blackened, such as during some movies, view the screen at a distance
3 times further than the height of the actual image. (That makes the distance closer than above recommended
distance.)
Viewing 3D images
Using the television menu controls, set so that 3D images are shown.
You can watch 3D images in the following cases:
●
• When a 3D image supporting Blu-ray Disc is played on a 3D image supporting player/recorder connected using a
HDMI cable to a 3D image supporting television.
• 3D image supported broadcast (program)
• 3D Photo, 3D Movie taken by LUMIX/Camcorder.
• 2D->3D (Simulated 3D) p. 56
Optional Accessories (p. 8)
* For more detail on usage of 3D Eyewear (Power button and Accessories etc.), please refer to operating manuals for the
purchased 3D Eyewear seeing it differs depending on the type of 3D Eyewear (Model No. of 3D Eyewear).
Wearing the 3D Eyewear
Turn on the 3D Eyewear
Put on the 3D Eyewear
View
When the HDMI receives information in which 3D mode is detected, 3D images are automatically displayed
according to the signal.
If the 3D images are not displayed correctly or the images cause discomfort, the images can be adjusted by “3D
format select” or “3D settings”.
Change the view 3D⇔2D, 3D settings (p.25)
●
After Use
Turn off the 3D Eyewear.
After using the 3D Eyewear, store it in the case provided.
24
Change the view 3D⇔2D
■Simply switches 3D
3D format select
3D
2D
⇔
2D images (Auto mode)
(example)
Switches to Manual mode (see below)
●
select
OK
■Change 3D format (Manual mode)
During above operation press red button and switch to Manual Mode.
Display “3D format select (Manual)
3D format select (Manual)
Native
Frame sequential (3D)
Frame sequential (2D)
Side by side (3D)
Side by side (2D)
Top and bottom (3D)
Top and bottom (2D)
2D -> 3D
3D settings (Adjust 3D images)
Select “3D settings” in “Setup”
• How to Use Menu Functions (p. 48)
• Using “Setup” menu (p. 53)
Select the item and set
3D settings
Auto detect 3D
3D signal notification
2D -> 3D depth
3D adjustment
Left / Right swap
Diagonal line filter
Safety precautions
Auto 1
On
Medium
Normal
Off
select
next
Press 3D to cycle through the 3D format
■3D adjustment
Changes 3D depth by adjusting left-right parallax.
Set “On” and adjusts “Effect”
3D adjustment
3D adjustment
Effect
3D adjustment (On/Off)
Effect (-3 to +3)
VIERA TOOLS -->p. 22
●
”3D” icon also available.
3D format select (Manual)
Native
Frame sequential (3D)
Frame sequential (2D)
Side by side (3D)
Side by side (2D)
2D -> 3D
(example)
On
+1
Basic
Viewing 3D images on TV
select
adjust
SettingsItem Description
Switches to 3D display when 3D indication is available (HDMI (3D), AVCHD file,etc)
Auto 1:
Auto detect 3D
3D signal notification
2D->3D depth
3D adjustmentSee above. (3D adjustment (On/Off), Effect (-3 to +3))
Left / Right swap
Diagonal line filterOn: Resolves discomfort caused by receiving a quincunx matrix signal. (On/Off)
Safety precautions Displays message for viewing 3D images.
* The perceived three dimensional effects of the 3D Eyewear differ from person-to-person.
* If a signal received from an external device is different from the 3D setting of the TV, such as 2D signal when the TV is set to
3D mode, the images may not be displayed correctly.
Auto 2: Same as Auto 1. plus detects 3D signal by identifying similar image in side by side or
top-and-bottom 3D formats.
Note: choose 3D mode manually, when auto detection is not available. (Off/Auto 1/Auto 2)
On: Displays a message according to the signal received by the “Auto detect 3D”. (On/Off)
Adjusts 3D depth. Available only when “2D->3D” is selected in “3D format select”.
(Minimum/Medium/Maximum)
Change this to On when the phases are reversed. (when there is an unusual sense of depth).
(Normal/Swapped)
25
Using Media player
You can view still and motion images and play music saved on a USB flash memory and an SD card.
Frame*
Photo effect*Select the display effect (Off/Sepia/Gray scale)
Transition effect
Photo size*
Burst playback*Continuously plays photos that were shot. (On/Off)
Display interval
Repeat playbackTurn the Slideshow Repeat (cycle) function on or off (Off/On).
Soundtrack
settings
• Picture quality may become lower depending on the slideshow settings.
• Picture setting may not work depending on the slideshow settings.
* When using DLNA (DMP mode) feature these menus are not displayed.
DMP: Digital media player p. 38
Select the Frame (Off/Array/Collage/Drift(with calendar)/Drift/Gallery(with calendar)/Gallery/Cinema)
Select the Transition effect shown between photos (Off /Fade in/Wipe ↓/Wipe ↑/Wipe →/Wipe ←/
Slide in ↓/Slide in ↑/Slide in →/Slide in ←/Zoom in/Comb ↑↓/Comb →←/Dissolve/Checker
wipe/Motion/Random)
Removes the black borders that are added according to the size of the photo being displayed. (Normal/Zoom)
Set “Display interval” each image is displayed in the Slideshow mode. (Short/Fast/Normal/Slow/Very slow)
Select the music (Off/Music 1/Music 2/Music 3/Music 4/Music 5/User selected*/Auto*)
User selected: Plays the soundtrack registered in the “Soundtrack settings”. (below)
Auto: Plays the songs on the SD card or USB flash memory.
For more data format information. (p. 56) * For Media player only ** For DLNA only.
●
30
Music view
[Music thumbnail]
Media player Music
My Music_1 My Music_2 My Music_3
OKSelect
SUB MENU
RETURN
Folders
Media selectPlay FolderDrive select
SD memory card
Info
[Features]
Play folder
●
Drive select
●
Media select
●
[Music playback screen]
Navigation area
AAAAAA
BBBBBBB
RETURN
Artist name
Album name
Song name
XXXXXXX
00:00.05 / 00:00.49
Elapsed time of current song
* Counter may not work correctly with
DLNA feature.
In this case “--:--:--”is displayed.
RETURN
Music options
Select “Music options” in “Setup SUB MENU”
Setup SUB MENU
Music options
Forward
Play/Pause
Stop
Reverse
• Forward/Reverse
Five level of 1 to 5 (x2, x5, x30, x70, x100)
are available.
* In DMR mode, Next skip/Prev. skip/User
BGM setting are not available.
To display/hide Guide and Banner
●
■Repeat playback
Set play repeat function (Off/Repeat Folder/One
song)
Music options
next
Repeat playback
On
select
Basic
Using Media player
Other settings in Media player
Display “Menu”
Select the item
Menu
Picture
Audio
3D settings
VIERA Link
Set
select
OK
■Adjust the Picture, Audio and 3D settings
Picture1/2
Reset to defaults
Picture mode
Contrast
Brightness
Color
Tint
Sharpness
Vivid
0
0
0
0
0
example: Picture menu
Picture menu/Audio menu (p. 49-51)
3D settings (p. 25)
select
adjust
■Use VIERA Link function
VIERA Link control
Recorder
Speaker output
TV
Back to TV
VIERA Link menu (p. 36)
select
change
31
VIERA Link
Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on the TV remote.
Enjoy additional HDMI Inter-Operability with compatible Panasonic products.
This TV supports “HDAVI Control 5” function.
Connections to equipment (DVD recorder DIGA, HD Camcorder, Home theater system, Amplifier, etc.) with HDMI cables
enables VIERA Link controls.
Equipment with the “HDAVI Control” function enables the following operations:
VersionOperations (See p. 34-37, for more information)
HDAVI Control or later
HDAVI Control 2 or later
HDAVI Control 3 or later
HDAVI Control 4 or later
HDAVI Control 5
•
•
•
•
•
•
•
•
•
•
•
“HDAVI Control
Automatic Input Switching
Power on link
Power off link
Default speakers
Speaker control
VIERA Link control only with the TV’s remote control
Unselected device energy save (for available equipment only)
Provides setting information (Language, time. etc.)
Automatic lip-sync function
Energy saving mode (with Quick Start mode)
Audio Return Channel
Audio Return Channel (ARC) is a function that enables digital sound signals to
be sent via an HDMI cable back from the TV to a connected audio device.
TM
TM
”
■When adding new equipment, reconnecting equipment or changing the setup after the connection,
turn the equipment on and then switch the TV on. Set the input mode to HDMI1, HDMI 2, HDMI 3,
HDMI 4 (p. 23), and make sure that the image is displayed correctly.
VIERA Link “HDAVI Control”, is based on the control functions provided by HDMI and industry standard known as HDMI
CEC (Consumer Electronics Control), with unique function that we have developed and added. As such, its operation with
other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
Please refer to the individual manuals for other manufacturers’ equipment supporting the VIERA Link function.
■HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. Recommended part number:
RP-CDHS15 (4.9 ft/1.5 m), RP-CDHS30 (9.8 ft/3.0 m), RP-CDHS50 (16.4 ft/5.0 m)
* For more details on the external equipment’s connections, please refer to the operating manual for the equipment.
32
VIERA Link™ Connections (with VIERA Link function)
■Terminal overview
Back of the TV
■Connecting DVD Recorder (DIGA)
VIERA Link
TM
“HDAVI Control
HDMI cable
DVD recorder (DIGA)
with VIERA Link function
■Connecting Home theater system/AV amp
HDMI 1 is recommended.
HDMI cable
Optical cable
No optical cable is necessary when connecting a Home Theater supporting “HDAVI control 5” with an HDMI
cable. Audio will be supported via ARC (Audio Return Channel) (p. 32)
One AV amp and one DVD recorder (DIGA) can be operated with this unit.
●
Home theater systems
with VIERA Link function
AV amp with
VIERA Link function
DVD recorder (DIGA)
with VIERA Link function
■Connecting HD Camcorder/Digital camera
Press INPUT and select an available HDMI terminal, then connect the camcorder to this input. After connection,
confirm the HDAVI control functions. (p. 34-37)
HDMI / mini HDMI cable
If connection (or setting) of equipment compatible with HDAVI control is changed, switch the power of this unit Off and
On again while the power of all equipment is On (so that the unit can correctly recognize the connected equipment) and
check that the connected equipment playback operates.
Note
Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective manuals.
●
When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit,
●
the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
Some devices use Mini-HDMI terminal. HDMI (type A) to Mini-HDMI (type C) cable or adapter should be used.
●
HD Camcorder
with VIERA Link
function
LUMIX
with VIERA Link
function
TM
”
Advanced
33
VIERA Link settings and Available features
To use all VIERA Link functions: After everything is connected, in VIERA Link settings menu, set “VIERA Link” to “On”.
Some features are disabled depending on the “HDAVI Control” version of the equipment.
Please check the list (p. 32)
Display the menu
Select “VIERA Link settings” in “Setup”
Menu
Setup
VIERA Link settings
ECO / energy saving
Keyboard type
U.S.
Advanced setup
First time setup
About
Reset to defaults
2/2
select
next
Select “VIERA Link”
Menu
VIERA Link settings
VIERA Link
Power on link
Power off link
Energy saving mode
Unselected device energy save
No (stay on)
Default speakers
On
No
Yes
Quick start
TV
select
34
Press to exit from
a menu screen
Press to go back
to the previous
screen
Select “On”
(default is On)
Select and make other settings
Menu
VIERA Link settings
VIERA Link
Power on link
Power off link
Energy saving mode
Unselected device energy save
No (stay on)
Default speakers
On
No
Yes
Quick start
TV
change
select
Automatic Input Switching
When using a Blu-ray Disc player, DVD player/recorder or Home theater system, the TV will automatically change to
the appropriate input, when playback begins on one of those devices.
• For a Home theater system the speakers automatically switch to the theater system.
Power on link
Yes: The TV is turned on automatically and switches to the appropriate HDMI input whenever VIERA Link compatible
equipment is initially turned on and the Play mode is selected.
Power off link
When “Yes” is selected and the TV is turned off, all connected VIERA Link compatible equipment is also automatically
turned off.
• A Panasonic DVD Recorder will not turn off if it is still in Rec mode.
• The TV remains on even if the VIERA Link compatible equipment is turned off.
Energy saving mode
Quick Start: When TV is turned off, all connected VIERA Link compatible equipment is moved to ECO Standby mode*
automatically under these conditions.
• Power off link:(Yes), The connected equipment has “HDAVI Control 4 or later (with Quick Start mode)”
* Minimum power consumption of Standby condition for the equipment.
Unselected device energy save
Yes: The connected VIERA Link compatible equipment will be turned off automatically when not in use under these
conditions.
• The connected equipment has “HDAVI Control 2 or later” (for available equipment only)
[ Example of timing for operation ]
• When the input is switched from the HDMI.
Default speakers
“TV” is the default setting. To set the Home theater system as Default speakers, change the Default speakers setting
from “TV” to “Theater”. Sound will be output from the Home theater whenever the TV is powered on.
Automatic lip-sync function
Minimizes lip-sync delays between the picture and audio when you connect to a Panasonic theater system or
Amplifier.
TV provided setting information
The following information about the TV settings can be transmitted to each piece of equipment (Recorder/Home
theater/Player) that has “HDAVI Control 3 or later” function connected to a TV with an HDMI cable.
Transmittable dataRecorderHome theaterPlayer
On Screen Display Language setting
(English/Español/Français)
Panel Aspect Ratio
(16:9 fixed)
Closed caption information
(Mode/CC type/Digital setting)
○○○
○○○
○
------
VIERA Link
TM
“HDAVI Control
TM
”
Advanced
Note
There is a possibility that all the GUI language information might be set from equipment that has an HDMI CEC
●
function connected to the TV with an HDMI cable. Depending on the operating conditions or the specification for
each piece of equipment the setting may or may not be applied.
For more details on the external equipment’s operation, please refer to the operating manual for the equipment.
●
35
VIERA Link menu and Available features
Some features are disabled depending on the “HDAVI Control” version of the equipment.
Please check the list (p. 32)
Display the VIERA Link menu
or
Select the item
select
VIERA Link control
Recorder
Speaker output
TV
Back to TV
Items in the VIERA Link menu may be grayed out
•
if no compatible equipment is connected (must be
HDAVI Control 2 or later) or if the equipment has
not initiated a connection with the TV. In that case,
switch the equipment’s power Off and On while the
TV is On.
For further details, see “VIERA Link” on page 34.
select
next
36
Press to exit from
a menu screen
Press to go back
to the previous
screen
Select
VIERA Link control
Home theater
Speaker output
Back to TV
Set
change
TV
Speaker control
You can select the Home theater or TV speakers for audio
output.
Control the theater speakers with the TV remote control.
This function is available only when a Panasonic Amplifier
or Player theater is connected.
Select “Speaker output”
Select “Home theater” or “TV”
VIERA Link control
Recorder
Speaker output
TV
Back to TV
select
change
■Home theater: Adjustment for the equipment
Volume up / down
Mute
The sound of the TV is muted.
•
When the equipment is turned off, the TV speakers
•
take over.
Selecting “Home theater” turns the equipment on
•
automatically if it is in Standby mode.
■TV: The TV speakers are on.
VIERA Link control only with the TV’s remote control
In the VIERA Link menu, you can select HDMI connected equipment and access it quickly. Continue using your TV
remote control to operate the equipment, pointing it at the TV.
Select “VIERA Link control”
Select the equipment you want to access
(Recorder/Home theater/Player/Camcorder/LUMIX/
Digital camera/ Network camera)
Using VIERA TOOLS (p. 22)
●
VIERA Link control
Recorder
Speaker output
TV
Back to TV
You can select available items
only.
select
change
If there is more than one equipment item, a number
●
after the name indicates the number of items. (e.g.
Recorder 1/Recorder 2/Recorder 3...)
The number of equipment items that can be connected
●
is three for recorders, and a total of three for Home
theater/Player/Camcorder/LUMIX/Digital camera/
Network camera.
Note
There is a limit to the number of HDMI connectors.
●
Operate the equipment with the TV remote
control, pointing it at the TV
To operate the equipment, read the manual for the
●
equipment.
■Available TV remote control buttons
Whether an operation is available differs depending on the connected equipment.
Move the cursor/SelectPlay
Set/AccessStop
Return to previous menuReverse/Forward
Display the functions
menu on the equipment
Available when the purpose of the keys
is displayed on screen
ExitClosed caption
Channel Up/DownSAP (Select Audio Mode)
-
0-9Select digital subchannel
Skip Reverse/Forward
Pause
VIERA Link
TM
“HDAVI Control
TM
”
Advanced
Back to TV
Returns the input selection of the device selected with the VIERA Link Control to the TV input.
Select “Back to TV”
VIERA Link control
Recorder
Speaker output
TV
Back to TV
select
OK
37
Using Network services
Available Network service and features
■ VIERA Connect p. 43
Easily expandable cloud-based services and carefully selected apps.
■Using DLNA feature (Home network) p. 44
This TV is a DLNA Certified™ product.
DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more
convenient to use on a home network. To learn more, visit www.dlna.org.
It allows you to share photos, videos and music stored in the DMS (for example, PC with windows 7 installed, etc.)
connected to your home network, and enjoy watching them on the TV screen as DMP or DMR.
DMS (Digital Media Server)
Ensure the connected equipment has a DLNA Certified media server.
Store photos, videos or music in the media server, and then you can watch them on the TV.
“Windows 7” is the server software that has been tested for the performance with this TV (current as of January , 2011).
For installing, read the manual for the server software.
The DLNA control function of Windows 7 is not supported with this TV.
●
When a server software for the media server is installed on the PC, the data may be at risk of being accessed by
●
other people. Please be aware of the settings and connections under network circumstances at the office, at a
hotel or even at home when not using a router.
DMP (Digital Media Player)
Finds the content on DMS and provides playback.
DMR (Digital Media Renderer)
Plays content received from the DMC, which will find content from DMS.
DMC (Digital Media Controller)
Finds the content on DMS and plays it on the DMR (This TV). (e.g. PDA, Internet tablets etc.)
■DLNA remote control
This TV supports the DLNA control function.
To use this function, set the “Network link” (p. 42)
■Using Network camera p. 45
38
Network Connections
Contact your Broadband service provider
NOTICE: If you don’t have Internet service by your local provider, please order a high-speed Internet service at
no less than the following connection speed. If you already have such service, make sure that the connection
speed exceeds the following.
Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively.
●
Dial-up Internet service cannot be used for VIERA Connect.
●
Select wired or wireless connection
If the Cable/DSL modem is close to the TV and you have only one TV set, you may choose a wired connection.
If the Cable/DSL modem is far from the TV and/or you have more TVs in the house, you may want to use a
wireless network.
Connecting to the Internet
Wired connection (Directly connected)
If you are not using the network for connecting anything else but the TV, you could just connect the TV
directly to the Cable/DSL Ethernet connection.
Wired connection (Using Router)
If you are using the network for connecting various equipment and want to connect the TV, you should use a
router to connect the TV to the Internet
Wireless connection
If you are using the network for connecting various equipment and want to connect the TV, you could also
use a Wireless LAN Adapter and Access point to connect the TV to the Internet
Using Network services
A
LAN cable
Back of the TV
B
Ensure to use a LAN straight
cable for this connection.
LAN cable
Back of the TV
C
■
Setup Wireless
LAN Adapter
Insert straight in
To use only DLNA features or Network camera, you can operate the features without Broadband network environment.
●
Ensure to use a LAN cross
cable for this connection.
Internet
Modem
Hub, Router
or
Access point
DLNA Certified
media server
Internet
Modem
Home network
(DLNA feature)
DLNA Certified
media server
(for example, PC,
etc.)
Network
camera
Network camera
Advanced
Back of the TV
LAN cable
39
Network settings
This is a setting for connecting to a broadband environment.
Display the menu
■Press to exit from
Select “Network settings”
Menu
Setup
3D settings
Channel surf mode
Language
Clock
ANT/Cable setup
Input labels
Anti image retention
Network settings
All
1/2
select
a menu screen
Select the settings and set
Menu
Network settings
■
Press to go back to
the previous screen
Connection test
Network connection
Wireless network
IP address/DNS settings
Network link
Network cameras list
Software update
Mac address
Wireless (WiFi)
00-0b-97-7c-65-e9
Connection test
Check that the Network settings are as shown below, and then start “Connection test”.
Select “Connection test” and press OK
(It takes a while to cancel the test.)
Displayed Connection test screen
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA Connect server.
Test in progress...
Complete Connection test
Success
-->
Completion screen is displayed.
Error-->Follow the directions on screen to complete the setting.
If you perform the Proxy settings, check the Proxy address
and the Proxy port number.
select
adjust
40
Network connection
Select Network type (Ethernet cable/Wireless (WiFi))
Wireless network (Confirm Current settings and status)
This setting is performed only when “Wireless (WiFi)” is selected in “Network connection” above.
■Displayed “Current settings and status” screen (If connected with Wireless LAN Adapter)
You can confirm the AP connection status.
(SSID/Wireless type/Security type/Encryption type/Connection status /Signal strength)
Press “Wireless network”
Wireless network
SSID :
Wireless type :
Security type:
Encryption type :
Connection status :
Signal strength :
Connect using these settings?
YesNo
(example)
select
OK
When you change “Wireless network” -->Press “No”
See “Sets / Changes wireless network setting” on p. 41
and follow the directions on screen to complete the
setting.
You need to be “Connected” to use network devices.
Please set Access point settings to “Connected”.
Wireless network (Wireless network setting)
Menu
Proxy setting
Proxy address
0
Proxy port
■Sets / Changes wireless network setting
Press “Wireless network” and display setting screen
Follow the directions on screen to complete the setting
Wireless network
Please choose connection method:
Search for wireless networks
WPS (Wi-Fi Protected Setup using push button)
WPS (Wi-Fi Protected Setup using PIN number)
Manual settings
select
OK
* Wi-Fi Protected Setup is an easy setting of the Wi-Fi
Alliance’s certification
For more details on setting of an Access point, please
●
refer to operating manual for the Access point.
Search for Wireless networks:
Select an access point from the ones searched for
WPS (Wi-Fi Protected Setup* using push button):
You can connect the Access point to press the
WPS (Wi-Fi Protected Setup using PIN number):
Set the PIN code that is displayed on the TV on the
Manual settings:
Manually set SSID, Security type, and Encryption type
●
IP address/DNS settings
Select “IP/DNS setting mode” and set to
“Automatic”
(When IP/DNS automatic acquisition in DHCP can be
used)
Menu
IP address/DNS settings
IP setting mode
IP address192.168.0.5
Subnet mask255.255.255.0
Default gateway192.168.0.254
DNS setting modeAutomatic
DNS192.168.0.20
Automatic
The acquired address is displayed.
Each IP address is acquired automatically
If you are using a broadband router, IP automatic
acquisition in DHCP can be used under normal
circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for
each device.
select
OK
IP address
automatically, and configure the settings as instructed
on the screen.
buttons.
Access point.
to match the settings of the Access point to which to
connect.
When connecting by 11n (5 GHz), select “AES” as the
Encryption type for the wireless LAN.
■Manual setting
Select “IP/DNS setting mode” and set to “Manual”
Select the item and press OK
Check the specifications of the broadband router and
enter each IP address.
Or Enter each IP address as was specified by the
provider
0 . 0 . 0 . 0
OK
10
I
Using Network services
Advanced
Proxy setting
Set only if specified by the provider. It is not required for normal household use.
Select “Proxy setting”
Menu
IP address/DNS settings
IP setting mode
IP address192.168.0.5
Subnet mask255.255.255.0
Default gateway192.168.0.254
DNS setting modeAutomatic
DNS192.168.0.20
Proxy setting
Automatic
Select item and press OK
Enter address or port number and press OK
Entering characters (p. 21)
●
select
OK
select
OK
■Proxy address
This is the address of the relay server that is connected
to the target server instead of the browser and sends
data to the browser. Setting is only required if specified
by the provider.
■Proxy port
This number is specified by the provider together with the
Proxy address.
41
Network link
■Edit the name of this TV
Sets your favorite name for this TV. This name
will be used to display the name of this TV on
the screen of the other Network compatible
equipment.
Select “VIERA network name”
Menu
Network link
VIERA network name
DLNA remote controlEnable
DLNA remote volume control
Network remote controlEnable
Edit the name and press OK
Entering characters (p. 21)
VIERA
Enable
select
OK
■Switches DLNA remote control (Disable/Enable)
Switches DLNA remote control “Disable” or “Enable”
DLNA remote controlEnable
select
■Volume setting in DMR operation (Disable/Enable)
Sets volume setting in DMR operation
• Available only when “Enable” is selected in “DLNA remote
control”
DLNA remote volume control
Enable
select
■Switches Network remote control (Disable/Enable)
Switches remote control of network device such as a
smartphone to “Disable” or “Enable”.
Network remote controlEnable
select
Network cameras list
Before using a Network camera, you need to register the camera as shown below. You can also set
Default camera or Disconnect/Delete the registered cameras.
Press “Network cameras list” and
display screen
Set Network camera setting
Network cameras list
ModelStatusDefault
Camera name
BL-C210A ConnectedCamera 1
...
...
...
...
...
...
...
...
Select
Find camerasDelete
DisconnectDefault camera
For this operation, please refer to the operating
●
...
...
...
...
...
...
OK
RETURN
...
...
...
...
...
...
...
manual for the Network camera.
select
Software update
Select “Software update”
Menu
Network settings
Connection test
Network connection
Wireless network
IP address/DNS settings
Network cameras list
Software update
Mac address
Wireless (WiFi)
00-0b-97-7c-65-e9
select
OK
Start camera search.
Before you start to search for a camera, switch the
●
camera to registration mode.
Search condition also depends on “Network settings”
●
Delete camera information.
Disconnect to camera.
“Disconnected” will be displayed in “Status”.
Set to default use.
Displayed “(Default)” next to camera name.
(Available only when reconnecting)
Connect to Camera. “Connect” will be displayed in
“Status”.
Press OK to start the Software update screen
Follow directions on the screen
Set “Clock” first. (p. 17)
●
42
VIERA Connect (Enjoy Internet Service)
You can access Internet services from the VIERA Connect Home screen.
You need a broadband environment to use this service.
●
Preparations
Network connections (p. 39)
●
Network settings (p. 40-42)
●
Display the Home screen
Select the item and press OK
select
■Press to exit from
a menu screen
■
Press to go back to
the Home screen
Other settings
In
Display “Menu”
Select the item
Menu
Picture
Audio
3D settings
VIERA Link
Set
view
MORE
BACK
Video communication (e.g. Skype™)
requires an exclusive Communication
Camera TY-CC10W (p. 8).
This screen is an example. It varies according to the usage conditions.
* Depending on the usage conditions, it may take a while to read all the data.
• VIERA Connect allows you to access only to websites supported by Panasonic and
has no full browser function.
• VIERA Connect contents are subject to change without notice.
• Not all VIERA Connect contents are available depending on the country and area.
• 3D images are not displayed on center of the home screen depending on the signal.
■Using USB keyboard
Keyboard type (p. 53)
●
Operate USB keyboard/Entering characters (p. 21)
●
(Also available Game pad)
■Adjust the Picture, Audio and 3D settings
select
adjust
select
Picture1/2
Reset to defaults
Picture mode
Contrast
Brightness
Color
Tint
Sharpness
example: Picture menu
Picture menu/Audio menu (p. 49-51)
3D settings (p. 25)
Vivid
0
0
0
0
0
■Use VIERA Link function
OK
VIERA Link control
Recorder
Speaker output
TV
Back to TV
VIERA Link menu (p. 36)
select
change
Using Network services
Advanced
43
Using DLNA feature
You can share the contents (Photo, Video, Music etc.) stored in DLNA Certified media server with your home network system.
settings” (p. 28) (photo
only)
To display Optional
●
menu
Network Camera
You can operate the Network camera from the TV remote and also check the images from the Network
camera on
VIERA Link control only with the TV’s remote control (p. 37)
●
your TV .
Preparations
Network connections (p. 39)
●
Network settings (p. 40-42)
●
Before connecting the Network camera to the TV, please complete “IP setting” and run
●
“Connection test”
With all connected equipment turned on
Display “VIERA Link” menu
If there is no registered camera displayed, please set it in
●
Network Camera settings. (p. 42)
There is also an option to start with sensor detection.
●
■Press to exit from
a menu screen
■Press to go back
to the previous
screen
Select “Network camera”
VIERA Link control
Network camera
Speaker output
Back to TV
TV
select
OK
View
4 split screen
Multi screen
(1/4)
Camera name
Camera 1
Model
BL-C210A
Select OK
RETURN
4 cam / 8 cam
9 split screen
Multi screen
(1/9)
Camera name
Camera 1
Model
BL-C210A
1-9
Select OK
RETURN
4 cam / 8 cam
Single screen
Single screen
Camera name
Camera 1
Model
BL-C210A
Pan
Tilt
RETURN
1-9
Preset position
Home position
0
Note
A number of VIERA-compatible network cameras can be found at the following sites:
●
http://www.panasonic.com/
http://panasonic.net/pcc/products/netwkcam/
For more details on setting and operation of the Network camera, please also read
●
the operating manual for the Network camera.
Default camera setting (p. 42)
●
select
OK to Single screen
select
OK to Single screen
Navigation area
Pan
Tilt
1-9
0
RETURN
Preset position
Home position
Using Network services
Advanced
45
Editing and Setting Channels
Menu
Cable
ANT/Cable setup
ANT in
Auto program
Manual program
Signal meter
Menu
Auto program
All channels
Analog only
Digital only
The current channel settings can be changed according to your needs and reception conditions.
ANT/Cable setup and operation
Display the menu
Select “Setup”
Menu
Select “ANT/Cable setup”
Menu
Press to exit from
a menu screen
Setup
3D settings
Channel surf mode
Language
Clock
ANT/Cable setup
Input labels
Anti image retention
Network settings
Setup
3D settings
Channel surf mode
Language
Clock
ANT/Cable setup
Input labels
Anti image retention
Network settings
All
All
1/2
1/2
next
select
next
select
46
Auto program (Set automatically)
Automatically searches and adds available channels to the memory.
Select “ANT in”
Select “Cable” or “Antenna”
Or select “Not used”.
Select “Auto program”
next
select
Select a scanning mode (p. 16)
After the scanning is completed, select “Apply”.
●
(see p. 47 ).
All previously saved channels are erased.
●
OK
select
Manual program ( Set manually)
Set favorite1/3
26-1
1
2
Use this procedure when changing the channel setup or
changing the channel display.
Also, use this to add or skip channels from the channel list
manually.
You can select a channel tuning mode (Digital only/Analog
only) in “Channel surf mode”(p. 53)
Select “Edit”
Manual program
EditCancelApply
Channel
CaptionFavorite Add
...
2...
...
3...
...
4...
...
5...
Yes
Yes
Yes
Yes
Select the item to edit
Manual program
EditCancelApply
Channel
CaptionFavorite Add
...
2...
...
3...
...
4...
...
5...
...
6...
...
7...
...
8...
Caption
...
9...
Select
OK
RETURN
Prev.page Next page
Go back to the previous
page
Favorite
Proceed to
next page
Yes
Yes
Yes
Yes
YesYesYes
Add
Yes
Caption:
•
Changes the station
identifier
Favorite:
•
Registers channels to the
Favorite List
Add:
•
Adds or skips channels
select
next
select the i
to edit (Caption/
Favorite/Add)
tem
next
Edit
Caption
●
Edit CH caption
Channel
Caption
Select
Caption
OK
RETURN
@
DeleteABC → abc
80-101
---
D A
change
set
Select or edit the station identifier.
(maximum 7 characters available)
Favorite
●
select
set
Set favorite Select the number
Add
●
Press OK to select “Yes (add)” or “No (skip)”
Move the cursor to a channel number
Manual program
EditCancelApply
CaptionFavorite Add
Channel
...
2...
...
3...
Yes
Yes
select
press OK to tune
to the channel.
Select “Apply”
program
l
CaptionFavoriteAdd
...
...
CancelApply
Yes
select
OK
or
Editing and Setting Channels
Advanced
To cancel the Edit
Manual program
EditCancelApply
Channel
CaptionFavorite Add
...
2...
...
3...
...
4...
...
5...
Signal meter (Check signal strength)
Check the signal strength if interference is found or freezing occurs on a digital image.
Menu
Signal meter
Channel
Tune manually
Signal strength
Current86%
Peak level98%
Yes
Yes
Yes
Yes
--
or
Signal intensity
select
next
Changes will be lost. Continue?
YesNo
If the signal is weak, check the antenna.
●
If no problem is found, consult your local dealer.
change
channel
OK
Note
Not available if “Cable” is selected in “ANT in” (see p. 46).
●
Available only for digital antenna channels.
●
OK
(returns to “ANT/
Cable setup”)
select “Yes”
47
How to Use Menu Functions
Various menus allow you to set the picture, sound, and other functions so that you can enjoy watching TV
best suited for you.
Display the menu
Shows the functions that can be adjusted.
●
Some functions will be disabled depending on
●
the type of input signal.
Press to exit from
a menu screen
Press to go back
to the previous
screen
Menu structure
Menu
Input labels
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Component
Video
PC
Select or enter the name of the device
connected to the HDMI 1 terminal.
Select
Change
RETURN
Customize label
(example: Input labels)
Menu bar
Press OK to move to the Menu items.
Menu items
Press OK to proceed to the next
screen if available.
“Reset to default” will be grayed out if no changes are made in the following menus:
●
“Picture”, “Pro settings”, “PC adjustments”, “Audio” and “Closed caption” .
Picture settings
SettingsItemsItem Description
Reset to defaults
Picture mode
(Each setting
(2D/3D mode)
will be retained
independently.)
Contrast,
Brightness,
Color, Tint,
Sharpness
Color temp.Cool 2/1/Normal/
Color mgmt.Off/On
Photo
enhancement
C.A.T.S.Off/On
Video NROff/Weak/
Pro settings
(Adjust the
“Picture mode”
setting in more
detail.)
Vivid
Standard
Cinema
THX
Game
Custom (Photo)
Warm 1/2
On/Off
Medium/Strong
Reset to defaults
Color spaceWide/Normal
W/B high R, G, B
W/B low R, G, B
Black extension
Gamma
adjustment
Panel brightness High/Mid/Low
Contour
emphasis
AGC0-15
Save as default
Adjust the image or picture quality
Resets all picture adjustments to factory default settings except for “Advanced
picture”.
Provides enhanced picture contrast and sharpness for viewing in a well-lit
room.
Recommended for normal viewing conditions with subdued room lighting.
For watching movies in a darkened room. It provides a soft, film-like picture.
Precisely reproduces the original quality of the image without any revision.
Recommended for playback of THX disc (disc with “THX” logo).
THX mode is used to mirror the picture settings used by professional filmmakers,
faithfully reproducing the image quality of THX Certified movies.
• THX Certified movies have the “THX” logo on a disc.
For playing video games.
Customizes each item according to your taste.
Photo is displayed in JPEG menu.
Adjusts the color, brightness, etc. for each picture mode to suit your taste
Selects a choice of Cool (blue), Normal, or Warm (red) color.
On: Enhances green and blue color reproduction, especially outdoor scenes.
Provides appropriate picture when still images are input.
Automatically adjusts the screen brightness according to the ambient lighting
condition.
Reduces noise, commonly called snow. Leave it off when receiving a strong signal.
Resets all Pro setting adjustments to factory default settings.
Adjust the color representation in panel color gamut.
Adjusts the white balance for light red/green/blue areas.
Adjusts the white balance for dark red/green/blue areas.
Adjusts the dark shades of the image in gradation.
S-curve/1.8/2.0/
2.2/2.4/2.6
Off/On
Gamma correction. Adjusts the intermediate brightness of the
image.
Selects the display panel brightness.
Adjusts the contour emphasis of the image.
Increases the brightness of dark signal automatically.
Save all “Picture” (when “Picture mode” is “Custom”) and “Pro
settings” adjustment.
How to Use Menu Functions
Advanced
49
SettingsItemsItem Description
• Some menus are grayed out depending on the input signal or condition.
(e.g. “Zoom adjustments” will be grayed out if the aspect is not set to Zoom.)
Aspect
adjustments
Screen formatFULL/H-FILL/
JUST/4:3/ZOOM
HD sizeSize 1/Size 2
H sizeSize 1/Size 2
Zoom
Adjusts vertical alignment and size when aspect setting is “ZOOM”.
Changes the format (aspect ratio).
Lets you choose the aspect depending on the format of
received signal. (p. 55)
Selects between 95 % (Size 1) or 100 % (Size 2) for the
scanning area with High-definition signal.
Select “Size 1” if noise is generated on the edges of the screen.
Size 1: Selected item for “HD size”. Scanning 95 %
●
Size 2: Selected item for “HD size”. Scanning 100 %
●
Adjusts the horizontal display range to reduce noise of both side
edges of an image.
Size 2: Adjusts the image size according to the aspect mode to
reduce noise. (p. 55)
adjustments
PC adjustmentsReset to defaults
SyncH & V
Dot clock
H-position
Resets PC adjustments.
The H and V sync signals are input from the HD/VD connector. (p. 58)
On green
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred.
Adjusts the horizontal position.
Uses a synchronized signal on the Video G signal, which is
input from the G connector. (p. 58)
V-position
Clock phase
Input
resolution
H-frequency
V-frequency
HDMI settingsHDMI/DVI RGB
range (HDMI 1-4)
Contents type
(HDMI 1-4)
Adjusts the vertical position.
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase
so that a clear picture appears.
It may not be possible to display a clear picture due to poor input signals.
WXGA (1,280×768 pixels)
Options change depending on signals
●
Displays the H (Horizontal)/V (Vertical) frequencies.
Display range
Horizontal: 15 - 110 kHz
Vertical: 48 - 120 Hz
Auto/
Standard
(16-235)/
Nonstandard
Off/Auto/Photo/
Graphics
Prevents the blown out highlights and blocked up shadows when
a wide-range signal is received. Selects between standard RGB
range (16-235 bits) or non-compliance (0-255 bits).
Auto: Switches the RGB range (Standard (16-235)/
Nonstandard) depending on the HDMI signal information.
Sets content type to each HDMI input.
Auto: Switches content type automatically depending on the
HDMI signal information.
Photo: Best setting for JPEG viewing.
Graphics: Best setting for On-Screen display of connected
equipment.
50
SettingsItemsItem Description
• Some menus are grayed out depending on the input signal or condition.
(e.g. “3:2 pulldown” will be grayed out if the input signal is high definition or you are viewing photos, etc.)
Motion smoother Off/Weak/Strong
Black levelDark/Light
3:2 pulldownOff/On/Auto
24p Direct in60Hz/48Hz
Adjust Audio quality
Resets Bass, Treble, and Balance adjustments to factory default settings.
Increases or decreases the bass response.
Increases or decreases the treble response.
Emphasizes the left / right speaker volume.
SurroundOff/On
Bass boostOff/On
Volume leveler
TV speakersOff/On
HDMI 1-4 inDigital/
Component/
Video
The TV can automatically turn On/Off at the designated date and time.
Off/15/30/60/90Select how long for the TV to automatically turn off.
Timer set
Inputs
Channel
Day
On time
Off time
Enables or disables this timer. (Off/On)
Sets the input to select when the TV turns on.
Sets the channel to select when the TV turns on.
Sets the day when the TV turns on.
[SUN/MON/TUE/WED/THU/FRI/SAT(displays the nearest future date)
MON-FRI/SAT-SUN/DAILY/Every SUN/Every MON/Every TUE/Every
WED/Every THU/Every FRI/ Every SAT]
Sets the time when the TV turns on. The TV will turn off after 90 minutes or as
specified.
Sets the time when the TV turns off within 24 hours.
Minimizes noise and cross-color in the picture.
Selects image resolution of component-connected devices.
SD: Standard Definition HD: High Definition
Only used with 480p video signal.
Reduces noise of specific digital signals of DVD, Cable box, etc.
Reduces HDTV flicker noise in the contoured sections of an
image
Improved moving picture quality by reducing motion blur.
Selects Dark or Light. Valid only for external input signals.
Adjusts the picture recorded in 24 fps for optimum quality.
48Hz: Achieves more cinematic playback by reproducing the
movie contents at twice the speed of 24 frames per second.
Equalizes overall volume levels across all channels and
external inputs.
Enhances audio L/R response when listening to stereo.
Enhances bass sound and provides powerful sound.
Minimizes volume disparity after switching to external inputs.
Switches to “Off” when using external speakers.
Off: “A.I. sound”, “Surround”, “Bass boost” and “Volume leveler”
do not work if “Off” is selected.
The default setting is “Digital” for the HDMI connection. (Digital
input signal)
Select audio input terminal when DVI cable is connected.
(Analog audio input signal)
How to Use Menu Functions
Advanced
51
Lock
Locks specified channels or shows to prevent children from watching objectionable content.
You will be asked to enter your password each time you display the Lock menu.
• Password setting/entering (p. 21)
Set “Custom” in “Mode” to specify “Channel”, “Game”, “Program” and “VIERA Connect” settings.
SettingsItemsItem Description
ModeOff
All
Custom
Channel
Mode
(These channels
will be blocked
regardless of the
program rating.)
Channel 1-7
GameOn/Off
Program
Mode
(To set a rating
level)
MPAA
U.S.TV
C.E.L.R.
C.F.L.R
VIERA ConnectOn/Off
Change password
Unlocks all the Lock settings of “Channel”, “Game”, “Program” and “VIERA Connect”.
Locks all the inputs regardless of the Lock settings of “Channel”, “Game”, “Program”
and “VIERA Connect”.
Locks specified inputs of “Channel”, ”Game”, “Program” and “VIERA Connect”.
Set channel lock status. (Off/All/Custom)
All: Locks all channels
Off: Unlocks all channels
Custom: Locks specified channels. Set “Channel 1” - “Channel 7”
Select a channel to lock. (Select up to 7 (1-7) channels to block.)
Locks Channel 3, Channel 4, and external inputs.
Set program lock status. (Off/On) “V-chip” technology enables restricted shows to lock
according to TV ratings. On: Set each rating level (MPAA, US.TV, C.E.L.R., C.F.L.R.)
Select U.S. movie ratings to lock.
U.S. TV program ratings.
Canadian English ratings.
Canadian French ratings.
Locks VIERA Connect. When you access VIERA Connect, the “VIERA Connect Lock”
screen is displayed. Type the correct password to enter the Home screen.
Change the password. Input the new 4-digit password twice.
For more
information
(p. 54)
• This television is designed to support the “Downloadable U.S. Region Rating System” when available.
(Available only in U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off rating and any other more restrictive ratings will also be blocked.
Closed captionDisplay closed caption
The television includes a built-in decoder that is capable of providing a text display of the audio.
The program being viewed must be transmitting the Closed caption (CC) information. (p. 57)
SettingsItemsItem Description
Reset to defaults
ModeOn/Off/
CC on mute
AnalogCC1-4/T1-4
DigitalPrimary/Second./
Service 3/4/5/6
Digital setting
(Set display
settings
in digital program)
Size
Font
Style
Foreground
Fore. opacity
Background
Back. opacity
Outline
• The settings in “Analog” or “Digital” depend on the broadcaster.
Resets all Closed caption settings to factory default settings.
On: To display Closed captions.
CC on mute: To display Closed captions when the audio is muted.
(When not using, select “Off”).
Choose the Closed caption service of Analog broadcasting.
CC1-4: Information related to pictures (Appears at the bottom of the screen)
T1-4: Textual information (Appears over the entire screen)
The Digital Closed caption menu lets you configure the way you choose to view
the digital captioning.
Text size
Text font
Text style (Raised, Depressed, etc.)
Color of text
Opacity of text
Color of text box
Opacity of text box
Outline color of text (Identify the setting options on the screen)
52
Setup
Other function settings
SettingsItemsItem Description
3D settingsSee p.25 for more detail.
Channel surf
mode
All/Favorite/
Digital only/
Sets the mode to select the channel with the Channel up/down button.
Favorite: Only channels registered as FAVORITE. (p. 20)
Analog only
LanguageEnglish/Español/
Selects the screen menu language.
Français
Clock
Adjusts the clock. (p. 17)
ANT/Cable setup See p. 46-47 for more detail.
Input labels
(Display labels
of connected
devices)
Selects the terminal and label of the external equipment.
Devices connected to external input terminals can be labeled for easier identification during the
input selection. (Input select (p. 23))
erminals: HDMI 1-4/Component/Video/PC
T
Label:
[BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME THTR/
RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/MONITOR/AUX/
OTHER/Not used
• You can also enter the label name directly. (Entering characters (p. 21))
Anti Image
retention
(Prevent Image
retention)
Pixel orbiter
(Wobbling)
4:3 side bars
(4:3 mode only)
Scrolling bar
Enable/Disable
Off/Dark/Mid/
Bright
Press “OK” to start the horizontal “Scrolling” on the screen.
• Press any key except the POWER key to return to previous
screen.
• You will return to the previous screen if no key operation has
been performed for 15 minutes.
How to Use Menu Functions
Enable: Shifts the display image automatically.
Changes the brightness of the side bar
The recommended setting is “Bright” to prevent the panel
“Image retention”. (p. 58)
[Scrolling bar]
Network settings See p. 40-42 for more detail.
VIERA Link settings
ECO/energy
saving
Keyboard type
See p. 34-35 for more detail.
No signal for 10
minutes
(Stay on/ Power
TV off)
No activity for 3
hours
(Stay on/ Power
TV off)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO
OPERATION continue for more than 10 minutes.
• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.
• “No signal for 10 minutes was activated” will be displayed for about 10 seconds
when the TV is turned on for the first time after the power was turned off by “No
signal for 10 minutes”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and
side panel key continues for more than 3 hours.
• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set, or while
“PC input” is selected.
• “No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by “No activity for 3 hours”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
Select keyboard type. Operate USB keyboard (p. 21)
Turns TV On automatically when the cable box or connected device is turned On.
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
Slideshow/Photos/
Videos/Music/
Set later/Off
VIERA Connect
Sets the banner display status.
Banner
(On/Off)
First time setup
About
Reset to defaults
Restarts the first time setup from “Language” setting. (p. 15)
Displays TV version and software license.
Performing Reset will clear all settings made with Setup, such as channel settings.
• Password setting/entering (p. 21)
Advanced
Sets the media contents or playback type to play back SD
cards automatically.
Set later: “Image viewer settings” menu will be displayed repeatedly.
“Using Media player” (p. 26)
53
Ratings List for parental control
“V-chip” technology enables you to lock channels or shows according to standard ratings set by the
entertainment industry.
■U.S. MOVIE RATINGS (MPAA)
NR
GGENERAL AUDIENCES. All ages admitted.
PGPARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PG-13PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
RRESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17NO ONE 17 AND UNDER ADMITTED.
XADULTS ONLY.
NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or
where rating does not apply.
■U.S. TV PROGRAMS RATINGS (U. S. TV)
Age-based
Group
NR
(Not Rated)
Youth
Guidance
FV: Fantasy/Cartoon Violence. V: Violence S: Sex L: Offensive Language D: Dialogue with sexual content.
Age-based
Ratings
TV-NR
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Possible Content
Selections
Viewable
•
Blocked
•
Viewable
•
Blocked
•
FV Blocked
•
Viewable
•
Blocked
•
Viewable
•
Blocked
•
D,L,S,V (all selected)
•
Any combination of
•
D, L, S, V
D,L,S,V (all selected)
•
Any combination of
•
D, L, S, V
L,S,V (all selected)
•
Any combination of
•
L, S, V
Description
Not Rated.
All children. The themes and elements in this program are specifically
designed for a very young audience, including children from ages 2-6.
Directed to older children. Themes and elements in this program may
include mild physical or comedic violence, or may frighten children
under the age of 7.
General audience. It contains little or no violence, no strong language,
and little or no sexual dialogue or situations.
Parental guidance suggested. The program may contain infrequent
coarse language, limited violence, some suggestive sexual dialogue
and situations.
Parents strongly cautioned. This program may contain sophisticated
themes, sexual content, strong language and more intense violence.
Mature audiences only. This program may contain mature themes,
profane language, graphic violence, and explicit sexual content.
■CANADIAN ENGLISH RATINGS (C. E. L. R.)
E
CProgramming intended for children under age 8. No offensive language, nudity or sexual content.
C8+
GGeneral programming, suitable for all audiences.
PGParental Guidance suggested. Some material may not be suitable for children.
14+
18+18+ years old. Programming restricted to adults. Contains constant violence or scenes of extreme violence.
Exempt - Exempt programming includes: news, sports, documentaries and other information programming,
talk shows, music videos, and variety programming.
Programming generally considered acceptable for children 8 years and over. No profanity, nudity or sexual content.
Programming contains themes or content which may not be suitable for viewers under the age of 14. Parents
are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens.
■CANADIAN FRENCH RATINGS (C. F. L. R.)
EExempt - Exempt programming.
G
8 ans+
13 ans+
16 ans+
18 ans+Programming restricted to adults. Contains constant violence or scenes of extreme violence.
Caution
The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and none) as
●
per FCC Rules Section15.120(e)(2). If the option of blocking “NR” programs is chosen “unexpected and possibly confusing
results may occur, and you may not receive emergency bulletins or any of the following types of programming:”
• Emergency Bulletins (Such as EAS messages, weather warnings and others)
• Locally originated programming • News • Political • Public Service Announcements • Religious • Sports • Weather
General - Programming intended for audience of all ages. Contains no violence, or the violence content is
minimal or is depicted appropriately.
8+ General - Not recommended for young children. Programming intended for a broad audience but contains
light or occasional violence. Adult supervision recommended.
Programming may not be suitable for children under the age of 13. Contains either a few violent scenes or one
or more sufficiently violent scenes to affect them. Adult supervision strongly suggested.
Programming may not be suitable for children under the age of 16. Contains frequent scenes of violence or
intense violence.
54
Technical Information
Aspect Ratio (FORMAT)
Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format
of the received signal and your preference. (p. 20)
(e.g.: in case of 4:3 image)
FULL
●
FULL
JUST
●
JUST
Enlarges the 4:3 image horizontally to the screen’s side edges.
(Recommended for anamorphic picture)
H-FILL
●
H-FILL
Enlarges the 4:3 image horizontally to the screen’s side
edges. The side edges of the image are cut off.
ZOOM
●
ZOOM
Enlarges the 4:3 image to the entire screen.
(Recommended for Letter Box)
Zoom adjustments
●
Vertical image position and size can be adjusted in “ZOOM”.
Select “Zoom adjustments” on the “Picture” menu. (p. 50)
V-position: Vertical position adjustment V-size: Vertical size adjustment
Stretches to justify the 4:3 image to the four corners of the
screen.
(Recommended for normal TV broadcast)
4:3
●
Standard
(Note that “Image retention” of the side bar may occur from
displaying it for a long time.)
Note
480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):
●
FULL, JUST, 4:3 or ZOOM
1080p / 1080i / 720p:
●
FULL, H-FILL, JUST, 4:3 or ZOOM
Side bar
Technical Information
To reset the aspect ratio (OK)
●
Aspect Ratio: 4:3
●
Size 1Size 2
Aspect Ratio: FULL/JUST(H-FILL/ZOOM)
●
Size 1Size 2
See page 50 for more information
H size
The width will be decreased on both sides to reduce noise.
●
The width will be increased on both sides to reduce noise.
●
Support Information
55
Data format information
Compatible Data format for Media player (SD card/USB flash memory)/DLNA p. 30
●
DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard
EXIF: Exchangeable Image File Format
Note
Format the card with the recording equipment.
●
The picture may not appear correctly on this TV depending on the recording equipment used.
●
Display may take some time when there are many files and folders.
●
The function (3D IMAGE VIEWER/Media player) cannot display still image not DCF formatted (i.e. TIFF, BMP).
●
Data modified with a PC may not be displayed.
●
Images imported from a PC must be compatible with EXIF 2.0, 2.1 and 2.2.
●
Partly degraded files might be displayed at a reduced resolution.
●
All “.JPG” extension data in the card and USB flash memory will be read in Photo viewer mode.
●
The folder and file names may be different depending on the digital camera used.
●
Do not use two-byte characters or other special codes.
●
The card may become unusable with this TV if file or folder names are changed.
●
For the suitable SD Memory Cards, please confirm the latest information on the following website.
●
http://panasonic.jp/support/global/cs (This site is in English only)
Cautions when handling SD Cards
Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction.
●
Do not remove the card while the unit is accessing data (this can damage card or unit).
●
Do not touch the terminals on the back of the card.
●
Do not subject the card to high pressure or impact.
●
Insert the card in the correct direction (otherwise, card or unit may be damaged).
●
Electrical interference, static electricity or erroneous operation may damage the data or card.
●
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic
●
operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.)
32 mm
24 mm
2.1 mm
SD Card/USB flash memory warning messages
MessageMeaning
No media. Please insert an SD memory card or USB
storage device.
No media. Device removed.
No photos/ No movies/No music files to play/ No
playable media
Cannot read file
The device is not inserted.
●
The device is removed.
●
The device has no data or this type of data is not supported.
●
The file is broken or unreadable.
●
The TV does not support the format.
●
2D→3D (Simulated 3D)
You can watch content in simulated 3D from photo and all video sources except the PC input.
●
This function converts standard 2D images and displays them in 3D. For this reason, the 3D images appear slightly different
●
from the originals. Please bear this in mind when using this function.
Using this function for profit-making purposes, or publically showing images converted from 2D to 3D in places such as coffee
●
shops or hotels etc. may infringe on the rights of the copyright holder protected under the Copyright Act.
56
VIERA LinkTM “HDAVI ControlTM”
HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 33)
This function may not work normally depending on the equipment condition.
●
The equipment can be operated by other remote controls with this function on even if the TV is in Standby mode.
●
Image or sound may not be available for the first few seconds when playback starts.
●
Image or sound may not be available for the first few seconds when input mode is switched.
●
Volume function will be displayed when adjusting the volume of the equipment.
●
If you connect equipment that has “HDAVI Control 2 or later” function to the TV with an HDMI cable, the sound from the
●
DIGITAL AUDIO OUT terminal can be output as multi-channel surround.
“HDAVI Control 5” is the newest standard (current as of December, 2010) for the HDAVI Control compatible equipment.
●
This standard is compatible with the conventional HDAVI equipment.
HDMI connection
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting
the TV unit and HD devices.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a Cable or Satellite box or a DVD player, can be
connected to the HDMI connector using an HDMI compliant (fully wired) cable.
HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.
●
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).
●
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
●
Audio settings can be made on the “HDMI 1 in”, “HDMI 2 in”, “HDMI 3 in” or “HDMI 4 in” menu screen. (p. 51)
●
Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz
(*1): The HDMI logo is displayed on an HDMI-compliant device.
(*2): Enquire at your local digital equipment retailer shop.
Caution
Use with a PC is not assumed.
●
All signals are reformatted before being displayed on the screen.
●
If the connected device has an aspect adjustment function, set the aspect ratio to “16:9”.
●
These HDMI connectors are “type A”.
●
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
●
A device having no digital output terminal may be connected to the input terminal of either “COMPONENT”, or “VIDEO” to
●
receive analog signals.
The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i and 1080p.
●
Match the output setting of the digital device.
For details of the applicable HDMI signals, see p. 58.
●
DIGITAL AUDIO OUT terminal
You can enjoy your Home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifier to the
DIGITAL AUDIO OUT terminals.
Caution
Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical
●
output.
When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC
●
channel is selected, the output will be PCM.
When playing a movie on SD Card Movie player, when the sound has been recorded in Dolby Digital, the output from the
●
DIGITAL AUDIO OUT terminal will be Dolby Digital. When the sound is recorded in other formats, the output will be PCM.
Closed Caption (CC)
For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3;
●
characters might be cut off).
The CC can be displayed on the TV only when the receiver (such as a Cable box or satellite receiver) has the CC set
●
to ON within the device itself. Check with your Cable or Satellite provider for instructions. The TV’s CC button does not
operate the Satellite or Cable box’s CC function.
If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC
●
may overlap on the TV.
If a digital program is being output in analog format, the CC data will also be output in analog format.
●
If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor.
●
Technical Information
Support Information
57
4:3 side bars
Do not display a picture in 4:3 mode for an extended period, as this can cause
“Image retention” to remain on either or both sides of the display field.
To reduce the risk of such “Image retention”, change the brightness of the side
bars.
See page 49 for more information
The side bar may flash (alternate black/white) depending on the picture.
Signals other than above may not be displayed properly.
●
The above signals are reformatted for optimal viewing on your display.
●
Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning
●
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
**
**
**
**
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
58
Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we
disclaim any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral
devices.
Care and Cleaning
First, unplug the Power cord plug from the wall outlet.
Display panel
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lintfree cloth.
If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap diluted
●
by 100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the
display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.
Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile
●
substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the cloth dry.
●
Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.
Do not allow any mild liquid dish soap to come into direct contact with the surface of the Plasma TV.
●
If water droplets get inside the unit, operating problems may result.
Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet surface
●
may be adversely affected or the coating may peel off.
Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.
●
Pedestal
Cleaning
●
Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small
amount of mild liquid dish soap has been added and then wipe with a dry cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating. (If
using a chemically-treated cloth, follow the instructions supplied with the cloth.)
Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with
●
rubber, vinyl products, or the like. (Doing so will cause deterioration.)
Technical Information
Care and Cleaning
Support Information
59
Frequently Asked Questions (FAQ)
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, visit the Panasonic website for further assistance. (see cover)
QuestionsAnswers
How do I view the picture from
devices such as a: Cable/Satellite
box, game console, Blu-ray or
DVD player?
Why is there no picture or just a
blue, black or snowy screen being
displayed?
Why doesn’t the picture look like
it is in High Definition?
Why do black bars appear on the
Picture
top and bottom and/or sides of
the screen?
Why is the picture snowy when
“ANT/Cable in” is selected?
Why is the picture chaotic and/
or torn and/or with a buzz in the
speakers?
Press the INPUT button on the remote to select the correct
input source.
Check that the device is turned on and functioning correctly.
Check if the power cord is plugged in and the TV is turned on
(front red LED light should be on; not blinking)
Press the INPUT button on the remote to select the correct
input source.
Ensure all connections are correct and secure.
When using external video source, such as a Cable/Satellite
box or DVD player, check that the device is on and functioning
correctly.
Press MENU on the TV’s remote control. If the menu is
displayed, then the TV is working; recheck above steps.
Press the INFO button on the remote to confirm the type of signal
being received (p. 19). HD signal should be 720P, 1080i or 1080p.
Select a High Definition channel from your HD source (Cable,
Satellite or fiber optic service). HD channels sometimes
broadcast non-HD content.
Ensure that your HD source (HD box, Blu-ray player, etc.) is
connected to the TV with an HDMI or Component cable and
set to output an HD video signal.
Change the format (aspect ratio) of the picture by pressing the
FORMAT button on the remote control. (p. 20)
Check the aspect settings on your external video source, such
as Cable/Satellite box, DVD/Blu-ray Disc player, etc.
Note: Some content, such as film-based movies, are
available in extra-wide format. Top and bottom bars are
unavoidable.
When using a cable service (without a box), check that all
connections are secure.
When using a cable or satellite box, change the connection
(wiring) to Composite, Component or HDMI. (p. 12)
If you’re using an antenna, then check that connections are
secure. Change the position or direction of the antenna and
check the “Signal meter”. (p. 47)
Check if electrical products such as kitchen appliances,
fluorescent lights or light dimmers are nearby. They may
interfere with the TV’s picture.
Try viewing a picture from another device, such as a DVD player
or a game console, to narrow down the source of the problem.
60
Why is there a black box on the
screen?
Why is the screen blank and the
power indicator blinking?
Why do some small spots on the
screen remain bright or dark?
Change settings of Closed Caption (CC). (p. 19, 52)
The TV has gone into shutdown mode to protect itself. Try
unplugging it for a few minutes and connecting it again. If
there was a temporary power surge on the AC line it may now
be OK. If the blinking returns, call 1-877-95VIERA (U.S.A.) or
1-866-330-0014 (Canada).
The Plasma panel is made up of a few million pixels and
is produced with advanced technology through an intricate
process. Sometimes a few pixels may be bright or dark. These
pixels do not indicate a defective panel and will have no impact
on the performance of the TV.
QuestionsAnswers
Why is there no sound coming
from the TV?
SoundOther
Why is the sound unusual,
distorted, low volume or in
another language?
Make sure the volume is up and MUTE is off.
Confirm the TV speakers are set to ON by pressing MENU and
selecting “Audio” --> “Advanced audio”. (p. 51)
Check that the correct SAP (Secondary Audio Program) is
selected by pressing the SAP button on the remote control.
(p. 19)
If the TV is connected to a Panasonic Home Theater via HDMI
cable, then check VIERA Link controls. (p. 37)
If the TV is connected to a Home Theater via optical cable,
then: Check the connection, the audio system is on, the
correct input is selected.
Check that the correct SAP (Secondary Audio Program) is
selected by pressing the SAP button on the remote control.
Check that all connections of external equipment connected to
the TV are secure.
When using Cable or Satellite box, check the device’s audio
settings. (example: try changing the box’s Audio Range to
‘narrow’)
Why is there a clicking, ticking or
buzzing sound coming from the
TV unit?
What is the easiest and best way
to connect a High-Definition Cable
or Satellite box to the TV?
Why does the CC button not
display Closed Caption?
Why does the screen and back
cover of the TV get warm?
Why doesn’t the Remote Control
work?
Why is the “ANT/Cable” option at
the top of the “Input select” menu
gray-out and cannot be selected?
When TV power is turned on or shut off there are electrical
components that make a click sound. This is normal operation.
Changes in the temperature and humidity of the room may
cause thermal expansion and contraction that can produce
sounds. This is not a sign of faulty operation or a malfunction.
Use an HDMI cable. It carries both digital video and audio
signal in HD. HDMI cable is the only cable needed to connect
an HD device to the TV.
When viewing TV via an HDMI connected device, such as a
Cable or Satellite box, CC must be enabled at the device.
Closed Caption is available only at supported TV
programming.
The main unit radiates heat and some of the parts may
become hot. This is normal operation and does not affect the
performance of the set.
Ensure good ventilation.
Do not block the ventilation holes of the TV and do not place
the TV on top of other equipment.
Check that the batteries are fresh, are of the same type and
are installed with the correct polarity (+ & -).
To operate other devices, such as changing channels when
using Cable or Satellite boxes or operating non-Panasonic Blu-
ray players, use the remote supplied with the device.
During “First time setup”, you indicated in step - that you
are using Cable or Satellite box and in step
box is connected to one of the TV’s AV inputs. In this case, the
Antenna/Cable input is deactivated to prevent unintentional
switching into unused tuner. To re-activate, press MENU,
select SETUP and repeat “First time setup”.
- b that the
Frequently Asked Questions (FAQ)
Support Information
Some menu items are grayed-out
and cannot be selected. Why?
Depending on certain modes or the selected input, some
options are not available. For example, Zoom adjustments are
only available when the FORMAT is changed to zoom mode.
61
QuestionsAnswers
How do I get VIERA Connect to
work on my TV?
Networking 3D
How do I check for the latest
software (firmware) version for
my TV?
1. You need a broadband (high speed) Internet service with a
speed of no less than 1.5 Mbps (p. 39).
2.
Connect the TV to the Internet through your router by an
Ethernet cable or a Panasonic Wireless LAN Adapter (included).
3. Run the “Connections Test”, under the Network Settings menu.
If Connection test fails, then check with your Internet service
provider or router/modem manufacturer if there are firewall,
content filter or proxy settings that may block the TV from
accessing the Internet.
In the main menu, select “Setup”. Highlight “Network Settings”
and press OK. Select “Software Update”. The current version
and latest version software will be shown. If software update
is “grayed out”, the TV is not connected to the Internet. If
newer version is available, update your TV. Follow the onscreen instructions, do not power off the TV until the update is
complete. Be patient; firmware update may take a while.
Can I use any USB WiFi adapter to
connect the TV to my wireless network?
How do I reset my TV to all factory
defaults and settings?
Can I download new apps
(content & services) into my
VIERA Connect TV?
Why doesn’t my 3D video source
looks 3D?
When selecting some 3D video
content, why are there two
pictures next to each other?
The TV’s internal software was designed to work with
Panasonic’s Wireless LAN Adapter (included).
In the main menu, select “Setup”. Highlight “Reset to Defaults”
and press OK. Enter your password (if created earlier) or
create a temporary new password. Select Yes to reset the TV.
Yes. Select the “VIERA Connect Market” item in the middle
bottom of the VIERA Connect home screen. “VIERA Connect
Market” allows you to find and install the applications to
“VIERA Connect” home screen. (p. 43)
1. Begin playing the 3D video source.
2. Ensure that the Panasonic 3D Eyewear (glasses) are on
(check the glasses battery)
3. Press “3D” button directly or press the VIERA TOOLS button
on the TV’s remote control and select “3D”
4. In the “3D format select” menu, select “3D”.
Notes:
1.
3D Blu-ray discs must be played with a 3D capable Blu-ray player.
2. Check with your Cable or Satellite provider if their supplied box
is 3D capable.
3. 3D signal must be connected to the TV via an HDMI cable.
There are a few different 3D formats and the current setting may
not match the incoming 3D signal. The format should change
automatically, but depending on the source/connection it may not
signal the TV properly. To manually select other 3D formats:
1. Press “3D” button directly or press VIERA TOOLS button on
the TV’s remote control and select “3D”
2. In the “3D format select” menu, choose another 3D format
such as “side by side” or “top and bottom”.
3. Remember to switch the 3D format setting back to “AUTO”
when you go back to viewing a standard 2D signal.
62
Why does the power on the 3D
Eyewear (glasses) turn off by itself?
Why does the left and right sides
of the image seem reversed?
Can I use 3D glasses similar to the
kind given at a 3D movie theater to
watch 3D content on my 3D TV?
The 3D Eyewear receives special synchronizing infrared signals
from the TV. If no signal is received within 5 minutes, the 3D
Eyewear automatically turns itself off to save power. Ensure that no
objects are blocking the path between the 3D Eyewear and the TV.
The 3D format has two different “phases”. Try the other phase:
1.
In the main menu, select “Setup”. Highlight “3D setting” and press OK.
2. In the “3D Settings” menu, select “Left/Right Swap”
No. Movie theater’s 3D glasses are passive. They use a simple
filter ‘lens’. Panasonic 3D Eyewear are actively synchronizing
the left/right eye viewing with the display, providing a superior
3D viewing experience.
Specifications
TC-P60GT30TC-P65GT30
Power SourceAC 120 V
Power
Consumption
Rated Power
Consumption
Standby condition0.2 W0.2 W
Plasma Display
panel
Drive methodAC type
Aspect Ratio16:9
Visible screen size
(W × H × Diagonal)
(No. of pixels)
Sound
Audio Output20 W [10 W + 10 W] (10 % THD)
473 W512 W
60 ” class (60.1 inches measured diagonally)65 ” class (64.7 inches measured diagonally)
52.3 ” x 29.4 ” x 60.1 ”
(1,330 mm x 748 mm x 1,526 mm)
Humidity: 20 % – 80 % RH (non-condensing)
VIDEO: RCA PIN Type × 1 1.0 V [p-p] (75 Ω)
AUDIO L-R: RCA PIN Type × 2 0.5 V [rms]
Y: 1.0 V [p-p] (including synchronization)
PB, PR: ±0.35 V [p-p]
AUDIO L-R: RCA PIN Type × 2 0.5 V [rms]
TYPE A Connector × 4
This TV supports “HDAVI Control 5” function.
•
D-SUB 15PIN: R,G,B / 0.7 V [p-p] (75 Ω)
HD, VD / 1.0 - 5.0 V [p-p] (high impedance)
RJ45 (10BASE-T/100BASE-TX)
3D Y/C FILTER CLOSED CAPTION
V-Chip VIERA Connect
3D IMAGE VIEWER Media player HDAVI Control 5
55.8 ” x 35.7 ” x 15.3 ”
(1,416 mm x 905 mm x 387 mm)
55.8 ” x 34.2 ” x 1.5 ” (2.4 ”)
(1,416 mm x 868 mm x 38 mm (59 mm))
97.1 lb. (44.0
83.8 lb. (38.0
)112.5 lb. (51.0 )
)97.1 lb. (44.0 )
60.6 ” x 38.6 ” x 15.8 ”
(1,538 mm x 978 mm x 400 mm)
60.6 ” x 37.1 ” x 1.5 ” (2.4 ”)
(1,538 mm x 940 mm x 38 mm (59 mm))
Frequently Asked Questions (FAQ)
Specifications
Support Information
[TC-P60GT30][TC-P65GT30]
55.8 ” (1,416 mm)
34.2 ” (868 mm)
35.7 ” (905 mm)
22.1 ”
Note
Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
(560 mm)
2.4 ”
(59 mm)
1.5 ”
(38 mm)
15.3 ” (387 mm)
37.1 ” (940 mm)
38.6 ” (978 mm)
60.6 ” (1,538 mm)
23.7 ”
(600 mm)
15.8 ” (400 mm)
2.4 ”
(59 mm)
1.5 ”
(38 mm)
63
Wireless LAN Adapter
Power supply
Antenna
Interface
Standard Compliance
Transmission system
Frequency Range
Transfer rate (standard) *
Access Mode
Security
Dimension (WxHxD)
Mass
* Transfer rates are theoretical values; however, actual communication rate will vary according to communication environment or
connected equipment.
This product incorporates the following software or technology:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software developed by the Independent JPEG Group,
(4) the software developed by the FreeType Project,
(5) the software licensed under the GNU LESSER General Public License (LGPL) and/or,
(6) open sourced software other than the software licensed under the LGPL.
(7) Windows Media digital right management technology (WM-DRM) licensed by Microsoft Corporation or its affiliates.
For the software categorized as (5), please refer to the terms and conditions of LGPL, as the case may be at
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
In addition, the software categorized as (5) are copyrighted by several individuals.
Please refer to the copyright notice of those individuals at
http://www.am-linux.jp/dl/DTV11U/
The LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY,
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to any third party who contact us at the contact information
provided below, for a charge no more than our cost of physically performing source code distribution, a complete machinereadable copy of the corresponding source code covered under LGPL.
Contact Information
cdrequest@am-linux.jp
Source code covered under LGPL is also freely available to you and any other member of the public via our website below.
http://www.am-linux.jp/dl/DTV11U/
For the software categorized as (5) and (6), please refer to the applicable license terms included in the “Setup” menu on product.
Further, for WM-DRM categorized as (7), please be aware of the following.
(a) This product is protected by certain intellectual property rights of Microsoft.
Use or distribution of this technology outside of this product is prohibited without a license from Microsoft or an authorized
Microsoft subsidiary.
(b) Content providers are using the digital rights management technology for Windows Media contained in this device
(“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including
copyright, in such content is not misappropriated. This device uses WM-DRM software to play Secure Content
(“WM-DRM Software”). If the security of the WM-DRM Software in this device has been compromised, owners of Secure Content
(“Secure Content Owners”) may request that Microsoft revoke the WM-DRM Software’s right to acquire new licenses to copy,
display and/or play Secure Content.
Revocation does not alter the WM-DRM Software’s ability to play unprotected content. A list of revoked WM-DRM Software
is sent to your device whenever you download a license for Secure Content from the Internet or from a PC. Microsoft may, in
conjunction with such license, also download revocation lists onto your device on behalf of Secure Content Owners.
DC 5V (USB powered) 500mA
Tx 1, Rx 2
USB 2.0
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
MISO-OFDM system, OFDM system, DSSS system
IEEE802.11n / IEEE802.11a :
Limited Warranty (for U.S.A. and Puerto Rico only)
PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way
Secaucus, New Jersey 07094
Panasonic Plasma Television
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer
Electronics Company (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which
starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new
or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price.
The decision to repair, replace or refund will be made by the warrantor.
PLASMA TV CATEGORIESPARTSLABORSERVICE
Up to 42” (diagonal)
46” (diagonal) and largerOn-Site
During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” Limited Warranty period,
there will be no charge for parts.
You must carry-in your product or arrange for on-site service during the Limited Warranty period. If non-rechargeable
batteries are included, they are not warranted. This Limited Warranty only applies to products purchased and serviced
in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser of a new product
which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for Limited Warranty
service.
On-Site or Carry-in Service
For On-Site or Carry-In Service in the United States and Puerto Rico call 1-877-95-VIERA (1-877-958-4372).
On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer
and does not include removal or re-installation of an installed product. It is possible that certain on-site repairs will not
be completed on-site, but will require that the product or parts of the product, at the servicer’s discretion be removed for
shop diagnosis and/or repair and then returned.
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER
normal wear and tear or cosmetic damage, nor does it cover markings or retained images on the glass panel resulting
from viewing fixed images (including, among other things, non-expanded standard 4:3 pictures on wide screen TV’s,
or onscreen data in a stationary and fixed location). The Limited Warranty ALSO DOES NOT COVER damages which
occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result
from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation,
set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage,
modification, or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product,
service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts
of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this
excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to
and from the servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE LIMITED WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF
THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an
implied Limited Warranty lasts, so the exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have others rights which vary from state to state. If
a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Service
Center. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at
the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH ARE
NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
1 (ONE) YEAR1 (ONE) YEAR
Carry-In
66
Customer Services Directory (for U.S.A. and Puerto Rico)
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center;
purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web
Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-877-95-VIERA (958-4372)
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
■For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by visiting our Web
Site at:
http://www.pstc.panasonic.com
or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 9 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South,
Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
■For hearing or speech impaired TTY users, TTY: 1-866-605-1277
Customer Services Directory (for U.S.A. and Puerto Rico)
Limited Warranty (for U.S.A. and Puerto Rico only)
Support Information
67
Limited Warranty (for Canada)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and
for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with
new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase
price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
Viera TV (42” & over)In-home serviceOne (1) year, parts (including panel) and labour.
Viera TV (under 42”)Carry-in serviceOne (1) year, parts (including panel) and labour.
In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic
service facility.
In-home service requires clear, complete and easy access to the product by the Authorized Servicer and does not include
removal or re-installation of an installed product. If removal is required to service the product, it will be at the discretion of
the Servicer and in no event will Panasonic Canada Inc. or the Servicer be liable for any special, indirect or consequential
damages.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada,
which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS
REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or
service by anyone other than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are
also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the
Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is
not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or
the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives
you specific legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
Our Customer Care Centre: 1-800 #: 1-866-330-0014
Email link: “Contact us → email” on www.vieraconcierge.ca
For product repairs, please contact Viera Customer Care Agent using the above contact info.
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
68
Note
Limited Warranty (for Canada)
Support Information
69
USA Only: Disposal may be regulated in your community due to
environmental considerations. For disposal or recycling information,
please visit Panasonic website: http://www.panasonic.com/environmental
or call 1-888-769-0149.
Sólo Estados Unidos: La disposición puede estar regulada en su
comunidad debido a consideraciones ambientales. Para información
sobre la disposición o reciclaje, por favor visite la página web de
Panasonic: http://www.panasonic.com/environmental
ó llame al 1-888-769-0149.
Customer’s Record
The model number and serial number of this product can be found on its back cover. You should note this serial number in
the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid
in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
Anotación del cliente
El modelo y el número de serie de este producto se encuentran en su panel posterior. Deberá anotarlos en el espacio
provisto a continuación y guardar este manual, más el recibo de su compra, como prueba permanente de su adquisición,
para que le sirva de ayuda al identificarlo en el caso de que le sea sustraído o lo pierda, y también para disponer de los
servicios que le ofrece la garantía.
Modelo Número de serie
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.