Panasonic SC-HT640W User Manual
Operating Instructions
Wireless
DVD Home Theater Sound System
Model No. SC-HT640W
Region number
The player plays DVD-Video marked with labels containing the region
number “1” or “ALL”.
Example:
1 ALL
1
2
4
surround sound
Wireless surround speaker
connection.
Advanced
progressive scan
Provides a smoother
and sharper image.
High-performance
sound effects
Sound quality enhancement,
Dolby Pro Logic II and more.
page
page
page
4
6
26
Before connecting, operating or adjusting this product,
please read the instructions completely.
Please keep this manual for future reference.
PC
P
If you have any questions contact
In the U.S.A.: 1-800-211-PANA (7262)
In Canada: 1-800-561-5505
RQT8611-1P
Dear customer
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully.
Operations in these instructions are described mainly with the
remote control, but you can perform the operations on the main
unit if the controls are the same.
System SC-HT640W
Main unit SA-HT640
Front speakers SB-FS640
Center speaker SB-PC640
Wireless surround speaker SB-SA640
Subwoofer SB-W640
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
IMPORTANT SAFETY INSTRUCTIONS
The socket outlet shall be installed near the equipment and easily
accessible or the mains plug or an appliance coupler shall remain
readily operable.
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILTIN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE
UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY OTHER MATERIALS DO NOT
OBSTRUCT THE VENTILATION VENTS.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded
interface cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables may result in
interference to radio and TV reception. Any changes or modifications
not approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Telephone No.: 1-800-211-7262
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed
below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
RQT8611
replacement of the obsolete outlet.
2
10) Protect the power cord from being walked on or pinched particular ly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the car t, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a car t is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
TABLE OF CONTENTS
Getting
Started
Playing
Discs
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . 2
Simple Setup
STEP 1
STEP 2
STEP 3
STEP 4
Basic play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the remote control . . . . . . . . . . . . . . . . . . . . . . 13
Convenient functions . . . . . . . . . . . . . . . . . . . .14
Checking the disc type in each tray . . . . . . . . . . . . . . 14
Displaying current playback condition. . . . . . . . . . . . . 14
Playing CDs sequentially . . . . . . . . . . . . . . . . . . . . . . 14
Program and Random play . . . . . . . . . . . . . . . . . . . . . 15
Positioning the speakers . . . . . . . . .4
Speaker installation options . . . . . . . . . . . . . 5
Speaker connections
Audio and video connections. . . . . . 6
Basic audio connection. . . . . . . . . . . . . . . . . 6
Basic video connection . . . . . . . . . . . . . . . . . 6
Radio and digital transceiver
connections . . . . . . . . . . . . . . . . . . 7
. . . . . . . . . . . . . 5
STEP 5
STEP 6
STEP 7
Control reference guide . . . . . . . . . . . . . . . . . . 9
Discs that can be played. . . . . . . . . . . . . . . . . 10
Disc caution . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Product Service . . . . . . . . . . . . . . . . . . . . . . . . 11
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Playing data discs using navigation menus. . 16
Playing data discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Selecting a track using CD text . . . . . . . . . . . . . . . . . 16
Playing HighMAT
Playing RAM discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using on-screen menus . . . . . . . . . . . . . . . . . . 18
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Other Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing the player settings . . . . . . . . . . . . . . 21
Changing the delay time of the speakers. . . . . . . . . . 23
AC cord connections. . . . . . . . . . . . 7
Preparing the remote control . . . . . 8
Performing QUICK SETUP . . . . . . . 8
TM
discs . . . . . . . . . . . . . . . . . . . . . . 17
Other
Operations
Reference
Using the radio . . . . . . . . . . . . . . . . . . . . . . . . . 24
Presetting stations automatically . . . . . . . . . . . . . . . . 24
Selecting the preset channels . . . . . . . . . . . . . . . . . . 24
Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using an outdoor antenna (optional) . . . . . . . . . . . . . 25
Using sound effects . . . . . . . . . . . . . . . . . . . . . 26
Changing the sound quality: Sound Field Control . . . 26
Enhancing the sound from the center speaker:
Center Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Enhancing the stereo sound: Dolby Pro Logic II . . . . 26
Adjusting the amount of bass: Subwoofer level . . . . . 26
Adjusting the volume of each speaker:
Speaker level adjustments. . . . . . . . . . . . . . . . . . . . 27
Troubleshooting guide . . . . . . . . . . . . . . . . . . .30
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Limited Warranty (ONLY FOR U.S.A.) . . . . . . . 33
Operating other equipment . . . . . . . . . . . . . . . 28
Operating the television . . . . . . . . . . . . . . . . . . . . . . . 28
Using other useful functions . . . . . . . . . . . . . .29
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . 29
Using headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Muting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using the Music Port . . . . . . . . . . . . . . . . . . . . . . . . . 29
Limited Warranty (ONLY FOR CANADA). . . . .34
Accessories . . . . . . . . . . . . . . . . . . . . Back cover
RQT8611
3
STEP1 Positioning the speakers
How you set up your speakers can affect the bass and the sound field. Note the following points:
≥ Place speakers on flat secure bases.
≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick cur tains.
≥ Left and right front speakers are interchangeable.
Simple Setup
Setup example
Place the front, center, and surround speakers at approximately the
same distance from the seating position.
The angles in the diagram are approximate.
FRONT
(L, R)
SURROUND
(wireless)
CENTER SUBWOOFER
≥Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
≥ Set the speakers up on an even surface to prevent them from falling.
Take proper precautions to prevent the speakers from falling if you
Positioning the speakers
cannot set them up on an even surface.
≥ Place the surround speaker
within approximately 10 m (33 ft)
from the main unit.
∫ Additional note for wireless setup
To avoid possible interference, do not place the surround
speaker near any of the following devices.
The surround speaker uses the same radio frequencies as other devices
that may be present in your home.
Main unit
(with digital transceiver)
Main unit
[Note]
≥ Keep your speakers at least 10 mm (13/32q) away from the system for
proper ventilation.
≥ To allow for proper ventilation and to maintain good airflow around the
main unit, position it with at least 5 cm (2q) of space on all sides.
≥ Do not block the ventilation holes of the main unit.
Center speaker
≥ Vibration caused by the center speaker can disrupt the picture if it is
placed directly on the television. Put the center speaker on a rack or
shelf.
≥ To prevent the speakers from falling, do not place directly on top of the
television.
Wireless surround speaker
Do not use the surround speaker or the digital transceiver in a metal
cabinet or bookshelf.
Subwoofer
Place to the right or left of the television, on the floor or a sturdy shelf so
that it will not cause vibration. Leave about 30 cm (11
television.
Caution
Do not touch the netted area of the
speakers.
e.g. Front speaker
13
/16q) from the
Notes on speaker use
≥ You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
≥ Reduce the volume in the following cases to avoid damage:
– When playing distorted sound.
– When the speakers are reverberating due to a record player, noise
from FM broadcasts, or continuous signals from an oscillator, test
disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
RQT8611
4
The surround speaker will automatically seek a clear channel if any of
these other devices interfere with its communication. When this
happens, the wireless link indicator (“ [W] ”) flashes on the main unit,
and there is a brief interruption in audio coming from the surround
speaker.
This is the normal operation of the product working to assure the best
possible performance of your Home Theater System.
If the interference persists, try moving the other devices to another
location outside the range of the surround speaker.
If irregular coloring occurs on your television
The front and center speakers are designed to be used close to a
television, but the picture may be affected with some televisions and
setup combinations.
If this occurs, turn the television off for about 30 minutes.
The demagnetizing function of the television should correct the problem.
If it persists, move the speakers further away from the television.
Caution
≥ The main unit and supplied speakers are to be
used only as indicated in this setup. Failure to
do so may lead to damage to the amplifier and/or
the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has
occurred or if you experience a sudden change
in performance.
≥ Do not attempt to attach these speakers to walls
using methods other than those described in
this manual.
2.4GHz-band microwave oven
personal computer with
2.4GHz-band wireless
LAN
2.4GHz-band cordless phone
Speaker installation options
∫ Attaching to a wall
You can attach the front and center speakers to a wall.
≥ The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg (22 lbs) per screw.
Consult a qualified building contractor when attaching the
speakers to a wall. Improper attachment may result in damage to
the wall and speakers.
1 Drive a screw (not included) into the wall.
‰3.0 to 4.0 mm
1
(
/8q to 5/32q)
Wall or pillar
2 Fit the speaker securely onto the screw(s) with the hole(s).
Front speaker
Center speaker
30 t o 35 mm
3
(1
/16q to 13/8q)
‰7.5 to 9.4 mm
19
/64q to 3/8q)
(
4.0 to 7.0 mm
5
(
/32q to 9/32q)
200 mm (77/8z)
∫ Fitting speaker stands (not included)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥ The stands must be able to support over 10 kg (22 lbs).
≥ The stands must be stable even if the speakers are in a high
position.
e.g. Center speaker
Metal screw holes
For attaching to
speaker stands
3
/16q), pitch 0.8 mm (1/32q)
5mm (
Plate thickness plus
7 mm to 10 mm (plus
9
/32q to 13/32q)
60 mm (2
3
/8q)
Speaker stand
(not included)
Simple Setup
e.g.
In this position, the
speaker will likely
fall if moved to the
left or right.
Move the speaker
so that the screw is
in this position.
STEP2 Speaker connections
≥ Attach the speaker-cable stickers to make connection easier.
≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.
6 SUBWOOFER
Speaker cable sticker
SUB
WOOFER
6
2 sheets of speaker cable stickers
Push!
1
3
5
Lch
Lch
CENTER
SURROUND
FRONT
≥ The stickers for the surround
SURROUND
FRONT
CENTER
Lch Lch
5
3
1
2
6
WOOFER
Rch
Rch
SUB
FRONT
SURROUND
SUB
SURROUND
FRONT
Rch
Rch
WOOFER
6
442
Insert the wire fully.
i: White
j: Blue
speakers are not to be used.
5 CENTER
CENTER
5
FRONT
CENTER
5
FRONT
FRONT
Rch
2
Lch
1
Rch
2
2 FRONT (R)
1 FRONT (L)
FRONT
Lch
1
Main unit
Positioning the speakers / Speaker connections
DIGITAL
TRANSCEIVER
RQT8611
5
STEP3 Audio and video connections
AUX
AUX
VID EO
OUT
≥ Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not be displayed properly.
≥ Turn the television off before connecting, and refer to the television’s operating instructions.
Basic audio connection
Simple Setup
Television
(not included)
RF IN
AUDIO
OUT
L
R
VIDEO OUT
AUDIO
IN
VIDEO IN
Audio cable
(not included)
Back of the main unit
AUX
COMPONENT VIDEO OUT
P
B
L
R
P
Y
R
VIDEO
OUT
S-VIDEO
OUT
Basic video connection
Back of the
Tel evis ion
Audio and video connections
(not included)
VIDEO IN
Video cable
(included)
Other video connections for improved picture
quality
≥ S-VIDEO OUT
Tel evis ion
(not included)
S-VIDEO
IN
Using the S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal by separating the chrominance (C) and luminance
(Y) signals. (Actual results depend on the television.)
S-video cable
(not included)
main unit
COMPONENT VIDEO OUT
P
B
Y
P
R
VIDEO
OUT
Back of the
main unit
COMPONENT VIDEO OUT
P
B
Y
S-VIDEO
P
R
VIDEO
OUT
S-VIDEO
OUT
OUT
Video cable
≥ This audio connection will enable you to play audio from your
television through your home theater system. Refer to “Operating other
equipment” (➜ page 28).
≥ COMPONENT VIDEO OUT
Television
(not included)
COMPONENT
VIDEO IN
PB
PR
Y
Using the
Video cables
(not included)
COMPONENT VIDEO OUT
terminals
Back of the
main unit
COMPONENT VIDEO OUT
P
B
Y
P
R
VIDEO
OUT
S-VIDEO
OUT
The COMPONENT VIDEO OUT terminals provides a purer picture than
the S-VIDEO OUT terminal. These terminals can be used for either
interlaced or progressive output. Connection using these terminals
outputs the color difference signals (P
B/PR) and luminance signal (Y)
separately in order to achieve high fidelity in reproducing colors.
≥ The description of the component video input terminals depends on
the television or monitor (e.g. Y/P
B/PR, Y/B-Y/R-Y, Y/CB/CR). Connect
to terminals of the same color.
≥ After making this connection, select “Darker” from the “Black Level
Control” in the “Video” tab (➜ page 22).
To enjoy progressive video
≥ Connect to a progressive output compatible television.
≥ Set “Video Output Mode” to “480p”, and then follow the
instructions on the menu screen (➜ page 19, Picture Menu).
≥ All Panasonic televisions that have 480p input connectors are
compatible. Consult the manufacturer if you have another brand of
television.
∫ Cable TV box or video cassette recorder connection
Cable TV box or video cassette recorder
(not included)
RF IN
To y o u r c a bl e
TV service or
television
antenna
RF OUT
RF cable
(not included)
RQT8611
6
Television
(not included)
RF IN
AUDI O
OUT
L
R
VIDEO OUT
AUDIO
IN
VIDEO IN
Audio cable
(not included)
Video cable
(included)
Back of the main unit
COMPONENT VIDEO OUT
AUX
P
B
L
R
P
Y
R
VIDEO
OUT
S-VIDEO
OUT
STEP4 Radio and digital transceiver connections
FM ANT
7575
AM
ANT
EXT
LOOP
LOOP
ANT GND
DIGITAL
TRANSCEIVER
75
AC IN
AM loop antenna FM indoor antenna
≥ Using an outdoor antenna (optional) (➜ page 25).
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best.
Keep loose antenna cable away from other wires
and cables.
Loosen the terminal screw with
a Phillips-head screwdriver.
Black
Red
White
While pushing, insert the wire fully.
Click!
Main unit
Re-tighten the terminal
4
screw.
Digital transceiver
FM indoor antenna
Affix this end of the antenna where
reception is best.
Adhesive tape
Insert the digital transceiver
into the slot.
Do not insert or remove
while the main unit is on.
Digital transceiver
Insert fully until you
hear a click.
DIGITAL
TRANSMITTER
FM ANT
COMPONENT VIDEO OUT
YP
B
LOOP
S-VIDEO
OUT
AM
ANT
EXT
R
P
VIDEO
OUT
Simple Setup
STEP5 AC cord connections
2 AC power supply cords
Main unit
AC power supply cord (included)
To household AC outlet
(AC 120 V, 60 Hz)
Conserving power
The main unit and the wireless surround speaker consume a small
amount of power when they are in standby mode [main unit: approx.
0.4 W, surround speaker: 0.5 W (in transmit mode), 1.2 W (in receive
mode)]. To save power when the unit is not to be used for a long time,
unplug it from the household AC outlet.
You will need to reset some memory items after plugging in the unit.
Wireless surround speaker
Radio and digital transceiver connections / AC cord connections
AC power supply cord (included)
To household AC outlet
(AC 120 V, 60 Hz)
[Note]
The included AC power supply cords are for use with the main unit and
surround speaker only. Do not use them with other equipment. Also, do
not use cords for other equipment with the main unit or surround
speaker.
RQT8611
7
STEP 6 Preparing the remote control
Remote control Batteries
Simple Setup
Insert so the poles (i and j) match those in the remote control.
2
3
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or shor t circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
∫ Use
R6/LR6, AA
≥ Do not use rechargeable type
1
batteries.
Aim at the display (➜ page 9), avoiding obstacles, at a maximum
range of 7 m (23 feet) directly in front of the unit.
STEP 7 Performing QUICK SETUP
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).
≥ To change your television’s video input mode, refer to its operating instructions.
≥ This remote control can perform some basic television operations (➜ page 28).
1 2 3 4 5 6
Select
Turn o n the
unit.
Preparing the remote control / Performing QUICK SETUP
To change these settings later
Select “QUICK SETUP” in the “Others” tab (➜ page 22).
Select
“DVD/CD”.
Press and hold to
show the QUICK
SETUP screen.
Register
Follow the messages and
make the settings.
ENTER
Press to finish
QUICK SETUP.
Press and
hold to exit.
RQT8611
8
Control reference guide
See page references in parentheses.
Turn the unit on/off (8)
Change the television’s video input mode (28)
Television operations (28)
Adjust the television volume (28)
Select the source
DVD/CD (8), FM/AM (24), AUX (28)/
FRONT MUSIC P./REAR MUSIC P.
§
(29)
Select disc’s title numbers etc./ Enter numbers (13)
Select the disc or show disc information (14)
Select preset radio stations (24)
Show a disc top menu (16) or program list (17)
Frame-by-frame/Select or register menu items on the
television screen (13)
Show on-screen menu (18)
Standby/on switch [POWER Í/I]
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power. (12)
MUSIC PORT
Connect an external device (29)
SURROUND MUSIC
Equalizing the sound (12)
POWER
MUSIC
SURROUND
PORT
12345
MUSIC
5
DISC
SELECTOR
Cancel (13)
Adjust the volume of the main unit (13)
Basic operations for play (12, 13)
Show a disc menu (16) or play list (17)
Return to previous screen (13) or show the setup
menu (21)
To use functions labeled with “
Press and hold the button for at least 2 seconds.
4, 5 / X TUNING W
Skip or slow-search play (12)/
Select the radio stations (24)
Display
TUNINGTUNING
MEMORYMEMORY
TUNE MODETUNE MODE
FM MODEFM MODE
(26) (26)
(14, 29)
(27)
(13, 26)
(15, 14)
< OPEN/CLOSE
Open/Close the disc drawer (12)
DISC EXCHANGE
Open the disc drawer to
exchange the disc in the play
position (12)
OPEN/CLOSE
DISC DISC
SELECTOR
EXCHANGE SKIP
VOLUME
DISC SKIP
Skip to the next disc tray (12)
Phones
Connect headphones (29)
(26)
(29)
Simple Setup
-
”:
Control reference guide
5 DISC SELECTOR
Select the disc tray (12)
Power indicator
This indicator lights when the unit is
plugged into the AC outlet.
Lighting Ring
The light goes out when the speaker is in
standby mode.
§
Refer to page 29, Using the Music Port.
-
TUNE MODE / -FM MODE
∫ /
Stop playing (12)/
Select the tuning mode (24)
Adjust the FM reception condition (24)
1 / MEMORY
Play discs (12)/Memorize the receiving
radio stations (24)
AC IN
WIRELESS
ON
OFF
MUSIC PORT
VOL UME
Turn up/down the volume (12)
SELECTOR (24)
DVD/CD#FM#AM#AUX#FRONT MUSIC P.#
REAR MUSIC P.
§
#Return to DVD/CD
Wireless selector [WIRELESS ON, OFF]
ON: Select when enjoying audio from the main unit.
OFF: Select when enjoying audio from MUSIC PORT
on the surround speaker.
MUSIC PORT
Connect an external device (29)
RQT8611
9
Discs that can be played
Operations in these instr uctions are described mainly with formats. Icons such as [DVD-V] show the formats.
DVD-Video [DVD-V]
—
DVD-Audio [DVD-A] [DVD-V]
≥ [DVD-V] Some DVD-Audio discs contain DVD-Video content. To play DVD-Video content, select “Play as DVD-Video” in
Other Menu (➜ page 20).
Video CD [VCD]
≥ Including SVCD (Conforming to IEC62107)
DVD-RAM [DVD-VR] [JPEG]
≥ [DVD-VR] Recorded with devices using Version 1.1 of the Video Recording Format (a unified video recording standard),
such as DVD video recorders, DVD video cameras, personal computers, etc.
≥ [JPEG] Recorded with Panasonic SD multi cameras or DVD video recorders using the DCF (Design rule for Camera
File system) Standard Version 1.0.
DVD-R (DVD-Video)/ DVD-RW (DVD-Video) [DVD-V]
≥ Discs recorded and finalized
§
on DVD video recorders or DVD video cameras.
—
§
A process that allows play on compatible equipment.
≥ It may not be possible to play all the above-mentioned discs in some cases due to the type of disc or condition of the recording.
∫ Discs that cannot be played
DVD-RW version 1.0, DVD-ROM, CD-ROM, CDV, CD-G, SACD,
DivX Video Discs and Photo CD, DVD-RAM that cannot be removed
from their cartridge, 2.6-GB and 5.2-GB DVD-RAM, and “Chaoji
VCD” available on the market including CVD, DVCD and SVCD that
do not conform to IEC62107.
iR (Video)/ iRW (Video) [DVD-V]
≥ Discs recorded and finalized
CD [CD] [WMA] [MP3] [JPEG] [VCD]
≥ This unit can play CD-R/RW recorded with the above formats. Close the sessions or finalize
≥ [CD] This unit is compatible with HDCD, but does not support the Peak Extend function (a function which expands the
dynamic range of high-level signals).
HDCD-encoded CDs sound better because they are encoded with 20 bits, as compared with 16 bits for all other CDs.
≥ [WMA] [MP3] [JPEG] This unit also plays HighMAT discs.
≥ [WMA] This unit does not support Multiple Bit Rate (MBR: an encoding process for audio content that produces an
audio file encoded at several different bit rates).
§
on DVD video recorders or DVD video cameras.
Note about using a DualDisc
≥ The digital audio content side of a DualDisc does not meet the
technical specifications of the Compact Disc Digital Audio
(CD-DA) format so playback may not be possible.
≥ Do not use a DualDisc in this unit as it may not be possible to
insert it correctly and it may get scratched or scraped.
Discs that can be played / Disc caution / Maintenance
Disc caution Maintenance
∫ To clean discs
Wipe with a damp cloth and
then wipe dry.
∫ Disc handling precautions
≥ Do not attach labels or stickers to discs. This may cause disc
warping, render ing it unusable.
≥ Do not write on the label side with a ball-point pen or other writing
instrument.
≥ Do not use record cleaning sprays, benzine, thinner, liquids which
prevent static electricity, or any other solvent.
≥ Do not use scratch-proof protectors or covers.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels
(rented discs, etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
Clean this unit with a soft, dry cloth.
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the instructions that
came with the cloth.
Do not use commercially available lens cleaners as they may cause
malfunction. Cleaning of the lens is generally not necessary although
this depends on the operating environment.
Before moving the unit, ensure the disc trays are empty. Failure to
do so will risk severely damaging the discs and the unit.
§
the disc after recording.
10
RQT8611
Product Service
1. Damage requiring service—The unit should be serviced by qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing
personnel.
3. Replacement parts— When parts need replacing ensure the servicer uses parts specified by the manufacturer or par ts that have the same
characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety check— After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the entire system.
Product information
For product information or assistance with product operation:
In the U.S.A., refer to “Customer Services Directory” on page 33.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an authorized
Servicentre closest to you.
Glossary
Decoder
A decoder restores the coded audio signals on DVDs to normal. This is
called decoding.
Dolby Digital
This is a method of coding digital signals developed by Dolby
Laboratories. Apar t from stereo (2-channel) audio, these signals can also
be multi-channel audio. A large amount of audio information can be
recorded on one disc using this method.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters around the world.
There is good separation between the channels, so realistic sound effects
are possible.
Dynamic range
Dynamic range is the difference between the lowest level of sound that
can be heard above the noise of the equipment and the highest level of
sound before distor tion occurs.
Frame still and field still
Frames are the still pictures that go together to make a moving picture.
There are about 30 frames shown each second.
One frame is made up of two fields. A regular television shows these
fields one after the other to create frames.
A still is shown when you pause a moving picture. A frame still is made up
of two alternating fields, so the picture may appear blurred, but overall
quality is high.
A field still is not blurred, but it has only half the information of a frame still
so picture quality is lower.
I/P/B
MPEG 2, the video compression standard adopted for use with DVDVideo, codes frames using these 3 picture types.
I: Intra coded picture
This picture has the best quality and is the best to use when adjusting
the picture.
P: Predictive coded picture
This picture is calculated based on past I- or P-pictures.
B: Bidirectionally-predictive coded picture
This picture is calculated by comparing past and future I- and
P-pictures so it has the lowest volume of information.
JPEG (Joint Photographic Experts Group)
This is a system used for compressing/decoding color still pictures. If you
select JPEG as the storage system on digital cameras, etc., the data will
be compressed to 1/10–1/100 of its original size. The benefit of JPEG is
less deterioration in picture quality considering the degree of
compression.
Linear PCM (pulse code modulation)
These are uncompressed digital signals, similar to those found on CDs.
MP3 (MPEG Audio Layer 3)
An audio compression method that compresses audio to approximately
one tenth of its size without any considerable loss of audio quality.
Playback control (PBC)
If a Video CD has playback control, you can select scenes and
information with menus.
Progressive/Interlaced
NTSC, the video signal standard, has 480 interlaced (i) scan lines,
whereas progressive scanning uses twice the number of scan lines. This
is called 480p.
Using progressive output, you can enjoy the high-resolution video
recorded on media such as DVD-Video.
Your television must be compatible to enjoy progressive video.
Sampling frequency
Sampling is the process of converting the heights of sound wave (analog
signal) samples taken at set periods into digits (digital encoding).
Sampling frequency is the number of samples taken per second, so larger
numbers mean more faithful reproduction of the original sound.
WMA (Windows MediaTM Audio)
WMA is a compression format developed by Microsoft Corporation. It
achieves the same sound quality as MP3 with a file size that is smaller
than that of MP3.
Product Service / Glossary
RQT8611
11
Loading...