CD Stereo System
SC-EN17PX
Colour
(S)............Silver Type
System
Main Unit: SA-EN17PX
Speakers: SB-EN17GCS
ORDER NO.AD0504050AE
Please use this manual together with the service manual for Model No.SC-EN17P, Order No.AD0502014C1.
Specifications
MAIN UNIT
nRADIO
Frequency range:
FM; 87.50 - 108.00 MHz (50kHz steps)
M; 520 - 1710 kHz (10kHz steps)
522 - 1629 kHz (9kHz steps)
Intermediate Frequency:
FM/WB; 10.7MHz
M; 459kHz
Sensitivity:
FM; 3.98µV/50mW output (-3dB limit
sens.)
M; 178µV/m/50mW output (Max
sens.)
nCD PLAYER
Sampling frequency: 44.1kHz
Decoding: 16 bit linear
Beam source: Semiconductor laser (wavelength
780nm)
Number of channels: 2 channel, stereo
Wow and flutter: Less than possible measurement
DA converter: MASH(1 bit DAC)
Terminals
Input:
Output: PHONES: 3.5mm stereo (32Ω)
nGENERAL
Power supply: AC110-127V / 220-240V, 50/60Hz
Power consumption: 26W
Dimensions (W×H×D): 206×204×214mm
Mass: 4.2kg (9lb. 4oz.) with speakers
nSPEAKERS
Full range: 8cm (3-1/8”), 12Ω×2
Ceramic tweeter: 1.52cm (19/32”) ×2
UX; 3.5mm stereo (27kΩ)
(8-1/8”×8-1/32”×8-7/16”)
2.6kg (5lb. 12oz.) without speakers
data
© 2005 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
SC-EN17PX
Dimensions (W×H×D): 115mm×211mm×215mm
(4-17/32”×8-5/16”×8-15/32”)
Power consumption in standby mode: 3.7W
Note:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
CONTENTS
Page Page
1 Note 2
2 Change in Replacement Parts List
2.1. SA-EN17PX
2.2. SB-EN17GCS
3 Schematic Diagram
2
2
3
3
3.1. SA-EN17
3.2. SB-EN17GCS
4 Printed Circuit Board
5 Cabinet Parts Location
5.1. SA-EN17PX
1 Note
3
4
5
6
6
This simplified service manua l is provided to indicate the main differences between the original Model No. SC-EN17P and the
subsequent Model No. SC-EN17PX.
2 Change in Replacement Parts List
Notes:
Important safety notice:
·
Components identified by
mark have special
characteristics important for safety.
Furthermore, special parts which have purposes of fireretardant (resistors), high-quality sound (capacitors), lownoise (resistors), etc. are used.
2.1. SA-EN17PX
Ref. No. Change in Replacement Parts Part Name & Description Pcs Remarks
SA-EN17P-S SA-EN17PX-S
66 RQLS0170 --- --- 72 RYQ0559-H RYQ0557-H CD HOLDER B UNIT 1
85 ---
A2 RJA0065-1D RJA0019-D AC CORD 1
A3 RQT7890-1P RQT7890-3P O/I BOOK 1 English
A5 --- RJP1SG05-Z POWER PLUG ADAPTOR 1
XTV3+12GFJ
When replacing any of these components, be sure to use
only manufacturers’s specified parts shown in the parts list.
The marking (RTL) indicates the Retention Time is limited
·
for this item. After the discontinuation of this assembly in
production, it will no longer be available.
All parts are supplied by
·
SCREW 1
ASPC
.
F901 K5D801AQ0001 K5D801BK0007 FUSE, 1
P1 RPG7413 RPG7531 PACKING CASE 1
PCB2 REP3877A REP3877F MAIN P.C.B. ASS’Y 1 (RTL)
R32 ERDS2TJ330T --- --- R112 ERJ3GEYJ682V ERJ3GEYJ392V RESISTOR, 1/10W 3.9KΩ 1
R113 ERDS2TJ222T ERJ3GEYJ122T RESISTOR, 1/4W 1.2KΩ 1
R212 ERJ3GEYJ682V ERJ3GEYJ392V RESISTOR, 1/10W 3.9KΩ 1
R213 ERDS2TJ222T ERDS2TJ122T RESISTOR, 1/4W 1.2KΩ 1
R403 ERJ3GEYJ151V ERJ3GEYJ221V RESISTOR, 1/10W 220Ω 1
R503 ERJ3GEYJ151V ERJ3GEYJ221V RESISTOR, 1/10W 220Ω 1
2