Panasonic SA-PM38, SB-PM48, SC-PM38 User Manual
Operating Instructions
Manuel d’utilisation
Instrucciones de funcionamiento
These operating instructions are applicable to the following system.
Ce manuel d’utilisation concerne la chaîne suivante.
Estas instrucciones son aplicables a los sistemas siguientes.
System/Chaîne/Sistema SC-PM38
Main unit/Appareil principal/
Unidad principal
Speakers/Enceintes/Altavoces SB-PM48
As an ENERGY STAR Partner, Panasonic
has determined that this product meets
the ENERGY STAR guidelines for energy
efficiency.
For Canada only: The word “Participant” is
used in place of the word “Partner”.
À titre de participant au programme ENERGY
STAR , Panasonic a déterminé que cet
appareil respecte les directives ENERGY
STAR en matière d’économie d’énergie.
Como socio de ENERGY STAR , Panasonic
ha determinado que este producto cumple con
las directrices de la ENERGY STAR para el
rendimiento energético.
Operations in these instructions are described using remote control,
but you can do the operations with the main unit if the controls are
the same.
Your unit may not look exactly as illustrated.
If you have any questions contact
In the U.S.A. and Puerto Rico: 1-800-211-PANA (7262)
In Canada: 1-800-561-5505
For U.S.A. and Puerto Rico only
The warranty can be found on page 16.
For Canada only
The warranty can be found on page 17.
Dans ce manuel, les procédures décrivent principalement le
fonctionnement à partir de la télécommande; toutefois, il est
possible d’utiliser les commandes de l’appareil principal si elles
sont les mêmes.
L’appareil peut varier légèrement de l’illustration.
Pour toute question, veuillez contacter
1-800-561-5505
La garantie se trouve à la page 16.
Las operaciones de estas instrucciones se describen principalmente
usando el mando a distancia, pero puede realizar las mismas
operaciones en la unidad principal.
Es posible que su unidad no sea exactamente como la que se
muestra.
SA-PM38
CD Stereo System
Chaîne stéréo avec
lecteur audionumérique
Sistema estéreo con reproductor
de discos compactos
Model No./Nº de modèle/Nº de modelo SC-PM38
SUPPLIED ACCESSORIES
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for
replacement parts. (Product numbers are correct as of
February 2009. These may be subject to change.)
Only for U.S.A. and Puerto Rico: To order accessories, refer to
“Accessory Purchases (United States and Puerto Rico)” on page
16.
Only for Canada: To order accessories, call the dealer from whom
you have made your purchase.
1 x Remote control (N2QAYB000429)
1 x AC power supply cord (K2CB2CB00021)
1 x AM loop antenna (N1DAAAA00001)
1 x FM indoor antenna (RSA0007-M or RSAX0002)
2 x Remote control batteries
ACCESSOIRES FOURNIS
Vérifier et identifier les accessoires fournis.
Lors de la commande de pièces de rechange, utiliser les
numéros indiqués entre parenthèses. (Les numéros de
modèle des produits sont à jour en date de février 2009.
Ces numéros peuvent être modifiés sans préavis.)
Pour la commande d’accessoires, contacter le détaillant où
l’appareil a été acheté.
1 x Télécommande (N2QAYB000429)
1 x Cordon d’alimentation c.a. (K2CB2CB00021)
1 x Antenne-cadre AM (N1DAAAA00001)
1 x Antenne FM intérieure (RSA0007-M ou RSAX0002)
2 x Piles pour la télécommande
ACCESORIOS INCLUIDOS
Por favor verifique e identifique los accesorios
incluidos.
Use los números indicados en paréntesis cuando solicite
refacciones. (Los números de productos son correctos a
febrero de 2009. Podrían estar sujetos a cambio.)
Para pedir accessorios, llame al distribuidor con el que realizó su
compra.
1 x Mando a distancia (N2QAYB000429)
1 x Cable de alimentación de CA (K2CB2CB00021)
1 x Antena de cuadro de AM (N1DAAAA00001)
1 x Antena interior de FM (RSA0007-M o RSAX0002)
2 x Pilas del mando a distancia
PP
RQTX0192-1P
ENGLISH
RQTX0192
32
Dear customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Inside of product
2 3
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would
void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Declaration of Conformity
Trade Name: Panasonic
Model No.: SC-PM38
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
The model number and serial number of this product can be found on
either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.
MODEL NUMBER ______________________________________
SERIAL NUMBER ______________________________________
SC-PM38
32
ENGLISH
RQTX0192
32
EST. 192 4
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN,
*
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
USE ONLY THE RECOMMENDED
*
ACCESSORIES.
DO NOT REMOVE THE COVER (OR BACK);
*
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY OTHER MATERIALS DO NOT
OBSTRUCT THE VENTILATION VENTS.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
User memo:
DATE OF PURCHASE __________________________________
DEALER NAME _______________________________________
DEALER ADDRESS ____________________________________
______________________________________________________
TELEPHONE NUMBER _________________________________
Listening caution
Selecting fine audio equipment such as the unit you’ve just purchased
is only the start of your musical enjoyment. Now it’s time to consider
how you can maximize the fun and excitement your equipment offers.
This manufacturer and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment by
playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion-and, most importantly, without
affecting your sensitive hearing.
We recommend that you avoid prolonged exposure to excessive noise.
can be deceiving. Over time your hearing “comfort level” adapts to
Sound
higher volumes of sound. So what sounds “normal” can actually be loud
and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE
your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
•
Slowly increase the sound until you can hear it comfortably and
•
clearly, and without distortion.
Once you have established a comfortable sound level:
Set the dial and leave it there.
•
Taking a minute to do this now will help to prevent hearing damage or
loss in the future. After all, we want you listening for a lifetime.
Table of contents
IMPORTANT SAFETY INSTRUCTIONS ..................................2
Listening caution .....................................................................3
Product service ........................................................................3
Simple setup ............................................................................4
Placement of speakers ............................................................5
Preparing the remote control .................................................5
DEMO function .........................................................................5
Overview of controls ...............................................................6
Discs .........................................................................................7
Using the FM/AM radio ............................................................9
Using the timer ......................................................................10
Using sound effects ..............................................................11
Using other equipment .........................................................12
Troubleshooting guide ..........................................................14
Specifications ........................................................................15
Maintenance ...........................................................................15
Limited Warranty
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
(ONLY FOR CANADA)
..............................17
..16
The socket outlet shall be installed near the equipment and
easily accessible.
The mains plug of the power supply cord shall remain readily
operable.
To completely disconnect this apparatus from the AC Mains,
disconnect the power supply cord plug from AC receptacle.
-If you see this symbol-
Information on Disposal in other Countries outside
the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact
your local authorities or dealer and ask for the
correct method of disposal.
Product service
1. Damage requiring service — The unit should be serviced by
qualified service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
The unit does not operate normally or exhibits a marked change in
(d)
performance; or
(e) The unit has been dropped or the cabinet damaged.
Servicing — Do not attempt to service the unit beyond that described
2.
in these operating instructions. Refer all other servicing to authorized
servicing personnel.
Replacement parts — When parts need replacing ensure the servicer
3.
uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may
result in fire, electric shock, or other hazards.
Safety check — After repairs or service, ask the servicer to perform
4.
safety checks to confirm that the unit is in proper working condition.
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the entire
system.
Product information
For product information or assistance with product operation:
In the U.S.A. and Puerto Rico, refer to “Customer Services Directory
(United States and Puerto Rico)” on page 16.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre
at 1-800-561-5505, or visit the website (www.panasonic.ca), or an
authorized Servicentre closest to you.
ENGLISH
RQTX0192
54
Simple setup
4
4
R
L
Making the connections
Connect the AC power supply cord only after all the other connections have been made.
Connect the speaker cables.
Connect the FM indoor antenna.
Adhesive tape
Connect the AM loop antenna.
AM loop antenna
Stand the antenna up on its base. Keep the loose antenna
cord away from other wires and cords.
Insert
fully
FM indoor antenna
Tape the antenna to a wall or column, in a position with the
least amount of interference.
To household
AC outlet
Connect the AC power supply cord.
The included AC power supply cord is for use with this unit only. Do not
use it with other equipment.
Do not use an AC power supply cord from other equipment.
Conserving power
The unit consumes approx. 0.35 W even when it is turned off with
[8, POWER]. To save power when the unit is not to be used for a long
time, unplug it from the household AC outlet. Remember to reset the
radio stations and any other memory items before using the unit again.
Optional antenna connections
FM outdoor antenna
FM outdoor antenna (not included)
75 Ω coaxial cable
(not included)
Never use an outdoor antenna during a lightning storm.
•
You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
•
Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
•
Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m (16 to 40 feet) of vinyl-covered wire horizontally along a
•
4 5
window or other convenient location.
AM outdoor antenna
AM outdoor antenna (not included)
5 to 12 m
(16 to 40 ft.)
AM loop antenna
(included)
54
ENGLISH
RQTX0192
54
DEMO
VOLUME
VOLUME
OPEN/CLOSE
_
+
/
iPod
/
USB
/
CD
FM/AM
POWER
Placement of speakers
Speakers are designed identically so that no left or right channel
orientation is necessary.
Note
Keep your speakers at least 10 mm (13/32") away from the system for
•
proper ventilation.
These speakers do not have magnetic shielding. Do not place
•
them near televisions, personal computers or other devices easily
influenced by magnetism.
•
To avoid damage to the speakers, do not touch the speaker cones if
you have taken the nets off.
•
You can damage your speakers and shorten their useful life if
you play
sound at high levels over extended periods.
•
Reduce the volume in the following cases to avoid damage.
− When playing distorted sound.
− When adjusting the sound quality.
− When turning the unit on or off.
Use only the supplied speakers.
The combination of the main unit and speakers provide the best sound.
Using other speakers can damage the unit and sound quality will be
negatively affected.
Preparing the remote control
Batteries
Use a manganese dry battery or an alkali dry battery.
•
Insert so the poles (+ and –) match those in the remote control.
•
Remove if the remote control is not going to be used for a long period
•
of time.
Store in a cool, dark place.
•
Do not heat or expose to flame.
•
Do not leave the batteries in an automobile exposed to direct sunlight
•
for a long period of time with doors and windows closed.
Mishandling of batteries in the remote control can cause electrolyte
•
leakage, which may cause a fire.
Use
Aim at the remote control sensor, avoiding obstacles, at a maximum
range of 7 m (23 feet) directly in front of the unit.
Refer to page 6 for remote control signal sensor position.
Caution
Use the speakers only with the recommended
•
system. Failure to do so can damage the amplifier
and speakers, and can cause fire. Consult a
qualified service person if damage occurs or if a
sudden change in performance is apparent.
Do not attach these speakers to walls or ceilings.
•
R6/LR6, AA
Place this side in before the other side
Do not:
mix old and new batteries;
•
use different types of batteries at the same time;
•
take apart or short-circuit;
•
attempt to recharge alkaline or manganese batteries;
•
use batteries if their covering has been peeled off.
•
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
DEMO function
When the unit is first plugged in, a demonstration of its functions may be
shown on the display.
[g, –DEMO]
If the demo setting is off, you can show a demonstration by selecting
“DEMO ON”.
Press and hold [g, –DEMO].
The display changes each time the button is held down.
DEMO OFF DEMO ON
While in standby mode, select “DEMO OFF” to reduce power
consumption.
ENGLISH
RQTX0192
76
DEMO
VOLUME
VOLUME
OPEN/CLOSE
D.BASS
BASS
TREBLE
_
+
/
iPod
/
USB
FM/AM
/
CD
POWER
Overview of controls
MP3
INFO
AUTO
PRESET
TUNE
MODE
FM
MODE
REPEAT
PLAY MODE
FM/AM
PLAY
Main unit
Refer to the numbers in parentheses for page reference.
iPod dock
Display panel
Remote control sensor
Track skip/search, tune/preset
channel selection, time adjustment,
bass/treble adjustment (7 to 12)
Standby/on switch (8, POWER)
(7, 10)
Press to switch the unit from on to
standby
mode or vice versa. In standby
mode, the unit is still consuming a
small amount of power.
iPod play/pause (12)
USB play/pause (13)
FM/AM selector (9)
Top of unit
Headphone jack ( )
Reduce the volume level and connect the headphones.
Avoid listening for prolonged periods of time to prevent
hearing damage.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Plug type: Ø3.5 mm (1/8") stereo (not included)
Bass/Treble selection (11)
D.bass on/off (11)
USB port (13)
Stop/Demo (5, 7, 8, 12, 13)
Volume control
Disc tray open/close (7)
Disc play/pause (7, 8)
Disc tray
Remote control
Remote control
Buttons such as function the same as the controls on the main unit.
Power on/off (7, 10)
Dimmer
Numeric (7, 8, 9, 13)
To select a 2-digit number
≧
e.g. 16: [
10] [1] [6]
Play timer (10)
Clock/Timer (10)
Auto off
Sleep timer (10)
Volume control
To select a 3-digit number
e.g. 226: [
6 7
≧
10] [≧ 10] [2] [2] [6]
Program (8, 9)
Remaster (11)
iPod menu (12)
Preset EQ (11)
iPod menu browsing (7, 8, 12, 13)
Album/track selection,
Display (7, 13)
Auto preset memory (9)
preset memory selection (9)
Manual tuning/
Delete (8)
Muting
Repeat (8)
Play mode, lowest/current
frequency switch (7, 9)
Stop (7, 8, 12, 13)
D.bass on/off (11)
This function allows you
to turn off the unit in disc
or USB mode only after
the unit is left unused for
10 minutes.
The setting is maintained
even if the unit is turned
Disc/USB play, confirm
selection (7, 8, 12, 13)
off.
Dims the display panel.
Surround (11)
MP3 info (7, 13)
FM mode (9)
Mutes the sound.
Press the button to activate.
•
Press again to cancel.
•
76
ENGLISH
RQTX0192
76
Discs
OPEN/CLOSE
PLAY MODE
MP3
INFO
Basic play
CD MP3
1 Press [^] to turn the unit on.
2 Press [;, OPEN/CLOSE] to open the disc tray and then load the
disc. Press [;, OPEN/CLOSE] again to close the tray.
Label must
face upward
Disc tray
3 Press [CD q/h] or [OK] to start play.
4 Adjust the volume.
To Action
stop the disc
pause play
skip tracks
search through tracks
CD
skip album
MP3
Play Mode function
1 Press [CD q/h].
2 Press [PLAY MODE] to select the desired mode.
Press [g].
Press [CD q/h].
Press again to resume play.
Press [u/t] or [y/i].
Press and hold [u/t] or [y/i] during
play or pause.
Press [e,r] in the play mode.
Press [e,r] once and then the numeric
buttons in the stop mode.
Display function
This function allows you to display the information of the current track.
Press [DISPLAY] repeatedly during play or pause mode.
CD
Elapsed play time
MP3
Elapsed play time Folder name Track name
Press [MP3 INFO] repeatedly during play or pause mode.
MP3
Elapsed play time
Note
Maximum number of displayable characters: approximately 30
•
This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
•
supported will not be displayed.
ID3 is a tag embedded in MP3 tracks to provide information about the
•
track.
Remaining play time
ID3 (Artist)ID3 (Track)ID3 (Album)
Mode To play
1-TRACK
1TR
1-ALBUM
1ALBUM
MP3
RANDOM
RND
1-ALBUM RANDOM
1ALBUM RND
MP3
one selected track on the disc.
Press the numeric buttons to select the track.
one selected album on the disc.
Press [e,r] to select the album.
a disc randomly.
all tracks in one selected album randomly.
Press [e,r] to select the album.
Note
During RANDOM or 1-ALBUM RANDOM play, you cannot skip to
•
tracks that have been played.
The current play mode is cleared when you open the disc tray.
•
CD
During RANDOM play, you can search backward or forward only
•
within the current track.
ENGLISH
RQTX0192
98
Discs (continued)
REPEAT
Advanced play
Repeat play
You can repeat program play or other selected play mode.
CD MP3
Press [REPEAT] before or during play.
“ON REPEAT” and “ ” are displayed.
To cancel
Press [REPEAT] again.
“OFF REPEAT” is displayed and “ ” is cleared.
Program play
This function allows you to program up to 24 tracks.
CD
1 Press [CD q/h] and then [g].
2 Press [PROGRAM].
3 Press the numeric buttons to select your desired track.
Repeat this step to program other tracks.
4 Press [CD q/h] to start play.
MP3
1 Press [CD q/h] and then [g].
2 Press [PROGRAM].
3 Press [e,r] to select your desired album.
4 Press [u/t] or [y/i] once and then the numeric buttons
to select your desired track.
5 Press [OK].
Repeat steps 3 to 5 to program other tracks.
6 Press [CD q/h] to start play.
&
&
Note
This unit can play MP3 files and CD-DA format audio CD-R/RW that
have been finalized.
CD
This unit can access up to 99 tracks.
•
It may not be able to play some CD-R/RW depending on the
•
condition of the recording.
Do not use irregularly shaped discs.
•
Do not use discs with labels and stickers that are coming off or with
•
adhesive exuding from under labels and stickers.
Do not attach extra labels or stickers on the disc.
•
Do not write anything on the disc.
•
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet the
technical specifications of the Compact Disc Digital Audio (CD-DA)
format so play may not be possible.
MP3
Files are treated as tracks and folders are treated as albums.
This unit can access up to 999 tracks, 255 albums and 20 sessions.
•
Files must have the extension: “.MP3” or “.mp3”
•
Disc must conform to ISO9660 level 1 or 2 (except for extended
•
formats).
To play in a certain order, prefix the folder and file names with the
•
3-digit numbers in the order you want to play them.
To Action
cancel program mode Press [PROGRAM] in the stop mode.
replay the program
check program contents
add to the program
clear the last track Press [DEL] in the stop mode.
clear all programmed
tracks
Note
When you try to program more than 24 tracks “PGM FULL” appears.
•
The program memory is cleared when you open the disc tray.
•
CD
During program play, you can search backward or forward only within
•
the current track.
Press [PROGRAM] then [CD q/h].
Press [u/t] or [y/i] when “PGM”
is displayed in the stop mode.
To check while programming, press
[PROGRAM] twice after “PGM” appears,
then press [u/t] or [y/i].
CD
Repeat step 3 in the stop mode.
MP3
Repeat steps 3 to 5 in the stop mode.
Press [g] in the stop mode.
“CLR ALL” is displayed. Within 5 seconds,
press the button again to clear all tracks.
8 9
98
ENGLISH
RQTX0192
98
Using the FM/AM radio
FM/AM
FM
MODE
AUTO
PRESET
TUNE
MODE
FM/AM
TUNE
MODE
FM/AM
TUNE
MODE
Manual tuning
1 Press [FM/AM] to select “FM” or “AM”.
2 Press [TUNE MODE] to select “MANUAL”.
3 Press [u/t] or [y/i] to select the frequency of the
required station.
“ST” is displayed when a stereo FM broadcast is being received.
To tune automatically
Press [u/t] or [y/i] for a moment until the frequency starts
changing rapidly. The unit begins auto tuning, stopping when it finds a
station.
Auto tuning may not function when there is excessive interference.
•
To cancel auto tuning, press [u/t] or [y/i] once again.
•
To improve FM sound quality
Press [FM MODE] to display “MONO”.
To cancel
Press [FM MODE] again until “MONO” disappears.
MONO is also cancelled if the frequency is changed.
•
Turn off “MONO” for normal listening.
•
Memory preset
Up to 30 stations can be set in the FM band and 15 stations in the
AM band.
Preparation
Press [FM/AM] to select “FM” or “AM”.
Automatic presetting
1 Press [PLAY MODE] to switch between “LOWEST” or
“CURRENT” frequency.
2 Press [AUTO PRESET] to start presetting.
Manual presetting
1 Press [TUNE MODE] to select “MANUAL”.
2 Press [u/t] or [y/i] to tune to the required station.
3 Press [PROGRAM].
4 Press numeric buttons to select a channel.
The station occupying a channel is erased if another station is
preset in that channel.
5 Repeat steps 2 to 4 to preset more stations.
Selecting a preset station
Press numeric buttons to select the channel.
OR
1 Press [TUNE MODE] to select “PRESET”.
2 Press [u/t] or [y/i] to select the channel.
FM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in 0.1 MHz steps.
To change the step to 0.1 MHz
1 Press and hold [FM/AM].
After a few seconds the display changes to a flashing display of the
current minimum frequency.
2 Continue to hold down [FM/AM].
When the minimum frequency changes, release the button.
•
To return to the original step, repeat the above steps.
After the setting is changed, any previously preset frequency will
•
be cleared.
ENGLISH
RQTX0192
1110
Using the timer
PLAY
Setting the clock
This is a 12-hour clock.
1 Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
CLOCK
Original display
2 Within 5 seconds, press [u/t] or [y/i] to set the time.
3 Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for a few seconds.
Note
The clock may lose or gain minutes over a period of time. Readjust as
necessary.
Using the play timer
zPLAY
To activate the timer
5 Press [z, PLAY] to turn on play timer.
zPLAY
6 Press [^] to turn off the unit.
To Action
change the settings Repeat steps 1 to 4 and 6.
change the source
or volume
check the settings
(when the unit is on
or in standby mode)
cancel
Note
The play timer will start at the preset time, with the volume increasing
•
gradually to the preset level.
The timer comes on at the set time every day if the timer is on.
•
The unit must be in the standby mode for the timer to function.
•
If you turn the unit off and on again while a timer is functioning, the
•
finish time setting will not be activated.
No display (off)
1) Press [z, PLAY] to clear the timer
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
Press [CLOCK/TIMER] repeatedly to select
zPLAY.
Press [z, PLAY] to clear the timer indicators
from the display.
You can set the timer to come on at a certain time to wake you up.
Preparation
Turn the unit on and set the clock.
•
Prepare the music source (disc, radio, USB or iPod) and set the
•
volume.
1 Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK
Original display
2 Within 5 seconds, press [u/t] or [y/i] to set the starting
time.
3 Press [CLOCK/TIMER] to confirm.
4 Repeat steps 2 and 3 to set the finishing time.
zPLAY
Start time
Play timer indicator
Finish time
Using the sleep timer
This function enables you to turn off the unit automatically after the
set time.
Press [SLEEP] repeatedly to select your desired time.
Sleep timer indicator
To cancel
Press [SLEEP] to select “OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time, and press [SLEEP] again
to select your desired time.
Note
The play and sleep timer can be used together. The sleep timer always
has priority. Be sure not to overlap timer settings.
10 11
1110
ENGLISH
RQTX0192
1110
ON RE-MASTER OFF RE-MASTER
Using sound effects
Selecting sound effects
You can change the sound effect by selecting Preset EQ or adjusting the
bass or treble effect.
Preset EQ
Press [PRESET EQ] repeatedly to select your desired setting.
HEAVY CLEAR SOFT VOCAL FLAT
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifies higher frequencies
SOFT For background music
VOCAL Adds gloss to vocals
FLAT No effect
Bass or treble
Enables you to enjoy the lower or higher pitch sound.
1 Press [BASS/TREBLE] repeatedly to select your desired
setting.
Enhancing the bass
Enables you to enjoy the powerful bass effect.
Press [D.BASS] to turn the D.BASS function on/off.
Note
The actual effect depends on the music source.
Re-master–Enjoying more natural sound
MP3
Digital remaster is effective on CD (MP3) and USB
Analog remaster is effective on iPod
This feature reproduces the frequencies lost during recording to give you
a sound closer to the original.
Press [RE-MASTER] during play to select “ON RE-MASTER”.
Each time you press the button:•
BASS TREBLE
Original display
Setting Effect
BASS For lower pitch sound
TREBLE For higher pitch sound
2 Press [u/t] or [y/i] to adjust the level.
Note
The tone level can be varied within -4 to +4.
Enjoying surround sound
Enables you to add natural width and depth to the stereo sound.
To activate
Press [SURROUND] to display “ ” indicator.
To cancel
Press [SURROUND] again to clear “ ” indicator.
Note
Surround sound is less discernible when listening through
•
headphones.
If interference in FM stereo reception increases, cancel the surround
•
sound effect.
ENGLISH
RQTX0192
1312
Using other equipment
iPod
1 Open the lid of the Built-in Dock for iPod.
2 Insert the suitable dock adapter for your iPod.
3 Insert your iPod into the dock.
Reduce the volume of the main unit to minimum before
•
connecting/disconnecting the iPod.
Hold the main unit when connecting/disconnecting the iPod.
•
Recharging starts when the iPod is inserted.
•
Push the lid gently
Note
It is recommended to use the dock adapter from Apple.
Dock adapter
(not included)
iPod
(not included)
Charging the iPod
iPod will start recharging regardless of whether this unit is in On or
•
Standby condition.
“IPOD ” will be shown on the main unit’s display during iPod
•
charging in main unit standby mode.
Check iPod to see if the battery is fully recharged.
•
If you are not using iPod for an extended period of time after
•
recharging has completed, disconnect it from main unit, as the battery
will be depleted naturally. (Once fully recharged, additional recharging
will not occur.)
iPod will not charge when the main unit is in USB mode.
•
Compatible iPod
Name Memory size
iPod touch 2nd generation 8 GB, 16 GB, 32 GB
iPod nano 4th generation (video) 8 GB, 16 GB
iPod classic 120 GB
iPod touch 1st generation 8 GB, 16 GB, 32 GB
iPod nano 3rd generation (video) 4 GB, 8 GB
iPod classic 80 GB, 160 GB
iPod nano 2nd generation (aluminum) 2 GB, 4 GB, 8 GB
iPod 5th generation (video) 60 GB, 80 GB
iPod 5th generation (video) 30 GB
iPod nano 1st generation 1 GB, 2 GB, 4 GB
iPod 4th generation (color display) 40 GB, 60 GB
iPod 4th generation (color display) 20 GB, 30 GB
iPod 4th generation 40 GB
iPod 4th generation 20 GB
iPod mini 4 GB, 6 GB
Compatibility depends on the software version of your iPod.•
Playing the iPod
Preparation
Confirm the iPod connection. (➡ above)
Press [iPod q/h] to play the iPod.
Adjust the volume of the main unit.
Remote control Main unit
To display iPod menu
(During play/pause)
To select contents from
iPod menu
(During play/pause)
To pause track
To skip a track
(During play/pause)
To search the current
track
(During play/pause)
Note
When you select another source or turn the main unit off, the iPod turns
off.
Press [iPod MENU].
Press [e,r] followed
by [OK].
Press [iPod q/h]
or [g].
Press [u/t] or
[y/i].
Press and hold
[u/t] or
[y/i].
3
3
Press [iPod q/h]
or [g].
Press [u/t] or
[y/i].
Press and hold
[u/t] or
[y/i].
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
12 13
1312
ENGLISH
RQTX0192
1312
DEMO
VOLUME
VOLUME
OPEN/CLOSE
D.BASS
BASS
TREBLE
_
+
/
iPod
/
USB
/
CD
FM/AM
POWER
Using other equipment (continued)
MP3
INFO
USB mass storage class device
The USB connectivity enables you to connect and play MP3 tracks from
USB mass storage class. Typically, USB memory devices. (Bulk only
transfer)
Preparation
Before connecting any USB mass storage device to the unit, ensure that
the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The device
connected via the cable will not be recognised by this unit.
USB enabled device
(not included)
1 Reduce the volume and connect the USB mass storage device.
2 Press [USB q/h] or [OK] to start play.
To Action
pause play
stop play
skip track
skip album
Press [USB q/h].
Press again to resume play.
Press [g].
“RESUME” is displayed. The position is memorized.
Press [USB q/h] to resume.
Press [g] again to clear the position.
Press [w,q].
Press [e,r] in the play mode.
Press [e,r] once and then the numeric buttons in
the stop mode.
Note
CBI (Control/Bulk/Interrupt) is not supported.
•
A device using NTFS file system is not supported [Only FAT12/16/32
•
(File Allocation Table 12/16/32) file system is supported].
Depending on the sector size, some files may not work.
•
This unit can access up to 255 albums (including blank folders) and
•
2500 tracks.
The maximum number of tracks in a folder are 999 tracks.
•
Only one memory card will be selected when connecting a multiport
•
USB card reader. Typically the first memory card inserted.
Do not unplug the USB device during reading or playback.
•
Disconnect the USB card reader from the unit when you remove the
•
memory card. Failure to do so may cause malfunction to the device.
When you connect a compatible digital audio player to the USB port,
•
charging may be activated. It will not charge when the unit is switched
to standby mode or iPod mode.
Changing the remote control code
Change the code if you find the remote control unintentionally also
controls other equipment.
Change the main unit’s code
Preparation
Ensure disc tray is empty.
Press and hold [CD q/h] on the main unit and then press and hold
[2] (or [1]) on the remote control.
“REMOTE 2” (or “REMOTE 1”) is displayed.
Change the remote control’s code
Press and hold [OK] and [2] (or [1]) on the remote control for at
least 2 seconds.
If the remote control and main unit are using different codes, a message
appears on the main unit’s display showing the main unit’s current code.
Follow the above step to change the remote control’s code to match it.
Display function
Press [DISPLAY] repeatedly during play or pause mode.
Elapsed play
time
Remaining play
time
Folder name Track name
Press [MP3 INFO] repeatedly during play or pause mode.
MP3
ID3 (Artist)ID3 (Track)ID3 (Album)
Elapsed play time
For other operating functions, they are similar to those described in
“Discs” (➡ page 7 and 8).
Compatible devices
Devices which are defined as USB mass storage class:
USB devices that support bulk only transfer.
•
USB devices that support USB 2.0 full speed.
•
Supported format
Files must have the extension “.mp3” or “.MP3”.
ENGLISH
RQTX0192
1514
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do
not solve the problem, refer to “Customer Services Directory (United States and Puerto Rico)” on page 16 if you reside in the U.S.A. or Puerto Rico, or
refer to “Product information” on page 3 if you reside in Canada.
Common problems
No sound. Turn the volume up.
Problem sounds unfixed,
reversed or come from one
speaker only.
Humming heard during play. An AC power supply cord or fluorescent light is near the cables. Keep other appliances and leads away
“ERROR” is displayed. Incorrect operation performed. Read the instructions and try again.•
“- -:- -” appears on the display. You plugged the AC power supply cord in for the first time or there was a power failure recently.
“F76” is displayed.
Listening to the radio
Noise is heard.
The stereo indicator flickers or
doesn’t light.
Sound is distorted.
A beat sound is heard. Turn the TV off or separate it from the unit.•
A low hum is heard during AM
broadcast.
When there is a television set nearby
The picture on the TV disappears
or stripes appear on the screen.
Playing discs
The display is wrong or play
won’t start.
The remote control
Remote control doesn’t work.
iPod
iPod does not turn on. Verify that the iPod battery is not depleted before connecting it to the unit.
No sound is coming from the
speakers.
Music is distorted or the sound
level is too low.
Cannot control the iPod from the
CD Stereo System.
iPod does not charge.
•
The speaker cords may not be connected properly. Turn the unit off, check and correct the connections
•
and turn the unit on (➡ page 4).
Check the speaker connections (➡ page 4).•
•
from this unit’s cables.
•
Set the time (➡ page 10).
•
Check and correct the speaker cord connections (➡ page 4).
•
If this does not fix the problem, there is a power supply problem. Consult the dealer.
•
Disconnect the USB device. Turn the unit off and then back on.
•
Use an outdoor antenna (➡ page 4).•
Separate the antenna from other cables and cords.•
The location and direction of the antenna are incorrect. If you are using an indoor antenna, change to an
•
outdoor antenna (➡ page 4).
The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit.
•
The disc may be upside down (➡ page 7).
•
Wipe the disc.
•
Replace the disc if it is scratched, warped, or non-standard.
•
Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an hour
•
for it to clear and try again.
Check that the batteries are inserted correctly (➡ page 5).
•
Replace the batteries if they are worn.
•
•
Before inserting your iPod into the dock, turn off both the unit and iPod. Turn power back on and select the
•
appropriate source.
The iPod is not correctly inserted into the dock. Turn off the iPod, remove it from the dock connector.
•
Reinsert it and turn it on again.
Make sure that iPod is actually playing something.
•
Adjust the volume.
•
Make sure the equalizer function of your iPod is turned off.•
Make sure the iPod is inserted properly into the dock.
•
Check the dock connection and make sure that iPod is selected as the source of music. (➡ page 12)
•
Check all connections. (➡ page 12)•
14 15
1514
ENGLISH
RQTX0192
1514
Troubleshooting guide (continued)
USB
The USB drive or its contents
cannot be read.
Slow operation of the USB flash
drive.
“NO PLAY” Check the content.
The USB drive format or its contents is/are not compatible with the system (➡ page 13). The USB host
•
function of this product may not work with some USB devices.
USB devices with storage capacity of more than 8 gigabytes may not work in some instances.
•
Large file size or high memory USB flash drive takes longer time to read.•
•
Only MP3 format files can be played.
•
Specifications
AMPLIFIER SECTION
RMS Output Power Stereo Mode
Front Ch (both ch driven)
20 W per channel (4 Ω), 1 kHz, 10% THD
FTC Output Power Stereo Mode
Front Ch (both ch driven)
15 W per channel (4 Ω), 60 Hz to 20 kHz,
10% THD
Phone jack
Terminal Stereo, 3.5 mm (1/8")
TUNER SECTION
Preset station FM 30 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range
87.9 MHz to 107.9 MHz (200 kHz step)
87.5 MHz to 108.0 MHz (100 kHz step)
Antenna terminals 75 Ω (unbalanced)
Amplitude Modulation (AM)
Frequency range
USB SECTION
Supported audio file format MP3 (*.mp3)
Maximum port power 500 mA
520 kHz to 1710 kHz (10 kHz step)
CD SECTION
Disc played [8 cm (3") or 12 cm (5") ]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3
Pickup
Wavelength 785 nm
Laser power CLASS I (CD)
Audio output (Disc)
Number of channels FL, FR, 2 channel
SPEAKER SECTION
Type 2 way, 2 speaker system (Bass reflex)
Speaker(s)
Woofer 10 cm (4") Cone type
Tweeter 6 cm (2
Impedance 4 Ω
Input power (IEC) 20 W (MAX)
Output sound pressure 80.5 dB/W (1.0 m)
Frequency range 52 Hz to 31 kHz (-16 dB)
74 Hz to 27 kHz (-10 dB)
Dimensions (W x H x D)
145 mm x 226 mm x 197 mm
(5
Mass (Weight) 1.9 kg (4.2 lbs.)
3
/8") Cone type
23
/32" x 8 29/32" x 7 3/4")
GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 70 W
Dimensions (W x H x D)
153 mm x 226 mm x 292 mm
(6
Mass (Weight) 2.5 kg (5.5 lbs.)
Operating temperature range 0°C to +40°C
(+32°F to +104°F)
Operating humidity range
35 % to 80 % RH (no condensation)
Power consumption in standby mode
0.35 W (approx.)
Note
1.
Specifications are subject to change without
notice.
2.
Total harmonic distortion is measured by the
digital spectrum analyzer.
1
/32" x 8 29/32" x 11 1/2")
Maintenance
If the surfaces are dirty
Remote control
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this unit.
•
Before using chemically treated cloth, read the instructions that came with the cloth carefully.
•
Loading...