RF Wireless Stereo Headphones System
RP-WF910
Operating Instructions
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this
manual for future reference.
RQT6634-E
EBE
CAUTION!
¡DO NOT INSTALL, OR PLACE THIS UNIT, IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS
WELL VENTILATED. TO PREVENT RISK OF
ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND
ANY OTHER MATERIALS DO NOT OBSTRUCT
THE VENTILATION VENTS.
¡DO NOT OBSTRUCT THE UNITíS VENTILATION
OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
¡DO NOT PLACE SOURCES OF NAKED FLAMES,
ENGLISH
ENGLISH
SUCH AS LIGHTED CANDLES, ON THE UNIT.
¡DISPOSE OF BATTERIES IN AN ENVIRONMEN-
TALLY FRIENDLY MANNER.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
Features
pThe headphones can be used up to 100 meters from
the transmitter. The position of the transmitter and the
condition of the batteries affect this distance.
pThe transmitter is powered by the AC adaptor and the
headphones are powered by two economical rechargeable batteries.
pThe closed-seal earpieces have drive units inside with
diameters of 40 mm, enabling reproduction of powerful
sounds.
pHas a comfortable headband which can be easily
adjusted.
pThe transmitter has an AUTO POWER ON/OFF
function.
Table of contents
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Power Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . 8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2
RQT6634
Marking sign is located on bottom of the unit.
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
SUOMI
TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI
LEUDOSSA ILMASTOSSA.
NORSK
DETTE APPARATET ER BEREGNET TIL BRUK
UNDER MODERATE KLIMAFORHOLD.
VAROITUS!
¡ÄLÄ ASENNA TAI LAITA TÄTÄ LAITETTA
KABINETTITYYPPISEEN KIRJAKAAPPIIN TAI
MUUHUN SULJETTUUN TILAAN, JOTTA TUULETUS ONNISTUISI. VARMISTA, ETTÄ VERHO TAI
MIKÄÄN MUU MATERIAALI EI HUONONNA
TUULETUSTA, JOTTA VÄLTETTÄISIIN YLIKUUMENEMISESTA JOHTUVA SÄHKÖISKU- TAI
TULIPALOVAARA.
¡ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA
SANOMALEHDELLÄ, PÖYTÄLIINALLA, VERHOLLA TAI MUULLA VASTAAVALLA
ESINEELLÄ.
¡ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI MUUTA
AVOTULEN LÄHDETTÄ LAITTEEN PÄÄLLE.
¡HÄVITÄ PARISTOT LUONTOA VAHINGOIT-
TAMATTOMALLA TAVALLA.
VAROITUS:
TULIPALO-, SÄHKÖISKUVAARAN TAI TUOTETTA
KOHTAAVAN MUUN VAHINGON
VÄHENTÄMISEKSI EI LAITETTA SAA ALTISTAA
SATEELLE, KOSTEUDELLE, VESIPISAROILLE
TAI ROISKEELLE, EIKÄ NESTETTÄ SISÄLTÄVIÄ
ESINEITÄ, KUTEN ESIMERKIKSI MALJAKOITA,
SAA ASETTAA LAITTEEN PÄÄLLE.
NORSK
ADVARSEL!
¡APPARATET MÅ IKKE PLASSERES I EN
BOKHYLLE, ET INNEBYGGET KABINETT ELLER
ET ANNET LUKKET STED HVOR VENTILASJONSFORHOLDENE ER UTILSTREKKELIGE.
SØRG FOR AT GARDINER ELLER LIGNENDE
IKKE FORVERRER VENTILASJONSFORHOLDENE, SÅ RISIKO FOR ELEKTRISK SJOKK ELLER BRANN FORÅRSAKET AV OVERHETING
UNNGÅS.
¡APPARATETS VENTILASJONSÅPNINGER MÅ
IKKE DEKKES TIL MED AVISER, BORDDUKER ,
GARDINER OG LIGNENDE.
¡PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE
LYS, OPPÅ APPARATET.
¡BRUKTE BATTERIER MÅ KASSERES UTEN
FARE FOR MILJØET.
ADVARSEL:
FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK STØT ELLER SKADER PÅ PRODUKTET,
MÅ DETTE APPARATET IKKE UTSETTES FOR
REGN, FUKTIGHET, VANNDRÅPER ELLER
VANNSPRUT. DET MÅ HELLER IKKE PLASSERES GJENSTANDER FYLT MED VANN, SLIK
SOM BLOMSTERVASER, OPPÅ APPARATET.
Precautions
Check with the proper authorities before trying to use this
unit in a country other than where it was purchased.
The radio frequencies this unit uses (863-865 MHz) are
not permitted in some countries.
AC adaptor
Handle the AC adaptor carefully. Improper handling is
dangerous.
¡Do not touch it with wet hands.
¡Do not place heavy objects on top of it.
¡Do not forcibly bend it.
Be sure to connect only the AC adaptor provided with the
unit.
Disconnect the AC adaptor from the household mains
socket if the unit is not going to be used for a long time.
Batteries
¡The rechargeable battery can be recharged about
500 times. If its operating time becomes extremely
short, you should replace it.
¡Align the poles (d and e) properly when inserting the
battery.
¡Do not mix old and new batteries or different types of
batteries.
¡Do not recharge ordinary dry cell batteries.
¡Remove all the batteries if the set will not be used for a
long period of time.
¡Carry and store the rechargeable battery in the sup-
plied battery carrying case to prevent contact with
metal objects.
¡Do not peel off the covering on batteries and do not use
if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can damage items the fluid contacts and may
cause a fire.
If electrolyte leaks from the battery, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part of your body.
The unit
No altering or remodeling
This can cause malfunctioning.
No dropping or strong impacts
This may damage the unit.
Locations to be avoided
Avoid using the unit in the following locations since they
can cause malfunctioning.
1. Bathrooms and other moisture-prone places
2. Warehouses and other dusty places
3. Very hot places near heating appliances, etc.
Do not leave the unit exposed to direct sunlight for
long periods of time.
This may deform or discolor the cabinet and may also
cause malfunctioning.
ENGLISH
RQT6634
3
Power Sources
ENGLISH
ENGLISH
1
2
R
DC IN
12V
d
e
AUDIO CHG
e
d
Recharge the batteries before using the unit.
Be sure the d and e ends are inserted the
right way.
Insert the two rechargeable batteries
…
1
(included) into the left hand earpiece
(L).
Push up on the indent to open the lid.
Close the compartment lid firmly after inserting the
L
batteries.
Connect the AC adaptor to the trans-
…
2
mitter then the transmitter’s [CHG]
cable to [CHG] on the headphones.
The OPR/CHG lamp goes green and charging
starts.
The lamp goes out when the batteries are fully
charged.
After recharging
Disconnect the [CHG] cable.
…
3
The unit is in the standby condition when the AC adaptor
is connected. The primary circuit is always “live” as long
as the AC adaptor is connected to an electrical
outlet.
To check the remaining battery strength:
The OPR/CHG lamp on the left hand earpiece (L) dims
or fails to light when the batteries are weak. Recharge
the batteries. A
4
A
RQT6634
Service life of the batteries:
If the OPR/CHG lamp on the left hand earpiece (L) dims
or fails to light even after recharging the batteries, they
have come to the end of their serviceable life and need to
be replaced.
Buy two new batteries (Part no.: P-3 GAVE).
The batteries can be recharged about 500 times. They
R
CHG
L
need to be replaced when operating time dramatically
shortens even after recharging.
For your reference:
Normal batteries (R6/LR6, AA, UM-3) can be also used
to power the headphones.
Do not attempt to recharge them.
L
OPR/CHG
Connections
1
A
a
B
AUDIO OUT
R
L
2
DC IN
12V
b
Connect the transmitter to the AV
…
1
unit.
The cable can be connected directly to a stereo
mini jack or to a large stereo headphone jack if the
included plug adaptor is used. A
a Portable CD player, headphone stereo, radio/
tape players, personal computer, etc.
OR
Use the included mini jack/pin cord adaptor to
connect the transmitter to your equipment’s
stereo pin terminals. B
b Amplifier, TV set, video deck, cassette deck,
laser disc player, personal computer, etc.
Connect the transmitter to the power
…
2
supply.
Note
The OPR indicator lights when the transmitter receives
input. It does not light just by connecting the transmitter
to an AC power source.
Installation
This unit uses radio waves.
The waves can be transmitted to a range of up to
100 meters.
Note
Under optimum conditions, the headphones can pick up
clean signals from the transmitter to a maximum of
100 meters. Metal between the two units and the presence of other radio waves can cause interference to occur at a shorter distance. This interference can be
cleared by moving closer to the transmitter, removing the
obstructions, or changing the transmission frequency
(see page 7).
You may occasionally experience interference due to
dead spots in the area covered by the transmitter. This
phenomena occurs with any kind of radio signal and is
not a malfunction. Dead spots can be moved by moving
the transmitter and the headphones.
ENGLISH
RQT6634
5
ENGLISH
ENGLISH
MAX
1
L
TUNING
VOL
MIN
OPR/CHG
OPR
OFF ON
R
Operation
Extend the rod antenna.
…
1
Turn on the unit the transmitter is
…
2
connected to.
Reduce the volume of the head-
…
3
phones with the [VOL] dial.
Switch the [OPR] switch to “ON”.
…
4
The OPR/CHG lamp goes red.
Put the headphones on.
Turn the volume on the sound
…
5
source up as much as possible without causing distortion.
Adjust the volume on the head-
…
6
phones.
If there is interference, turn the
…
7
[TUNING] dial to reduce it.
See page 7 for more detailed instructions on how
to reduce interference.
After listening
∆∆
∆
∆∆
1 Take the headphones off.
∆∆
∆
∆∆
2 Switch the [OPR] switch to “OFF”.
The OPR/CHG lamp goes out.
∆∆
∆
∆∆
3 Turn off the unit the transmitter is connected to.
6
3
4
6
7
RQT6634
VOL
MAX
OPR
OFF ON
VOL
MAX
TUNING
MIN
MIN
Note
¡Avoid listening for prolonged periods of time to prevent
hearing damage.
¡Discontinue use if you experience discomfort with the
headphones that directly contact your skin.
Continued use may cause rashes or other allergic reactions.
Concerning the AUTO POWER ON/OFF
function:
When audio signals are supplied, the transmitter’s power
is turned on (The OPR lamp lights.); when audio signals
have not been supplied for 2 or 3 minutes, its power is
automatically turned off. (The OPR lamp goes out.)
When the volume of the connected unit is too low, this
function doesn’t work. Turn up the volume as much as
possible without causing distortion.
Operation
1
2
TUNING
CHANNEL
231
If interference remains bad
The radio waves from the transmitter may be being interfered with by other radio waves. You can change the
frequency to improve reception.
Select another channel with [CHANNEL].
∆
1
Turn the [TUNING] dial on the head-
∆
2
phones to the position with least interference.
Note
Some sound or noise may still be heard even if no sound
signals are passing through the transmitter.
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
¡Never use alcohol, paint thinner or benzine to clean this
unit.
¡Before using chemically treated cloth, read the instruc-
tions that came with the cloth carefully.
Notice about the rechargeable battery
The battery is designated recyclable.
Please follow your local recycling regulations.
ENGLISH
Suomi
Huomautus ladattavasta paristosta
Paristo määritellään kierrätykseen sopivaksi.
Ole hyvä ja noudata asuinpaikkasi kierrätyssääntöjä.
Norsk
Merknad vedrørende det oppladbare batteriet
Batteriet er resirkulerbart.
Vennligst følg det lokale regelverket for resirkulering.
RQT6634
7
Troubleshooting guide
Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem,
consult your dealer for instructions.
Problem Probable cause(s) Suggested remedy Page
No sound.
ENGLISH
ENGLISH
Sound is distorted.
Excessive noise.
Is the unit that the transmitter is
connected to on?
Are the unit and the transmitter
connected?
Is the volume too low?
Is the input level of the audio
signal too high?
Is there an obstruction between
the transmitter and the
headphones?
¡Are other radio waves
obstructing the transmitter’s
waves?
¡Are the transmission frequency
and the receiver’s frequency
tuned correctly?
Is the input level of the audio
signal too low?
Turn the unit on.
Connect the unit correctly and
ensure the plugs are properly
inserted.
If the transmitter is connected to
the headphone jack, turn up the
volume of the connected unit.
Turn up the volume on the
headphones.
If the transmitter is connected to
the headphone jack, turn down the
volume of the connected unit.
Remove the obstruction, move the
transmitter, or change position
yourself.
Change the transmission
frequency with the transmitter’s
[CHANNEL] switch and then tune
in the headphones with the
[TUNING] dial.
Adjust the rod antenna.
If the transmitter is connected to
the headphone jack, turn up the
volume of the connected unit.
6
5
6
6
6
5
7
6
6
No sound, sound is
distorted, or there is
excessive noise.
RQT6634
8
Is the OPR/CHG indicator dim or
does it fail to light at all?
The batteries have run down.
Recharge them. If the indicator
remains dim after recharging, the
batteries have come to the end of
their serviceable life and need to
be replaced.
4
Specifications
» General
Modulation system
Carrier frequency 863-865 MHz
Transmitting distance up to 100 m
Frequency response 18 -22,000 Hz
Distortion factor 1% (at 1 kHz)
» RF Transmitter (RP-WF910T)
Power supply DC 12 V, 150 mA
Dimensions Diameter 100 mmqHeight 30 mm
Mass 135 g (approx.)
» RF-Headphones (RP-WF910H)
Power supply DC 3 V: 2qR6 (size AA) batteries or
Dimensions (W
Mass 250 g (approx.), including batteries
Approximate recharging and operating time
Stereo frequency modulation system
(using AC Adapter, included)
DC 2.4 V: 2qsupplied P-3 GAVE Ni-Cd.
qq
qq
qH
qD) 170q215q95 mm
qq
qq
rechargeable batteries
ENGLISH
Recharging
14 hours
Operation
25 hours
» Accessories
(Consult your dealer when replacement accessories are
to be purchased.)
pAC Adaptor (DC12 V, 150 mA)
(For Continental Europe: RFX1694)
p2qNi-Cd rechargeable batteries (P-3 GAVE)
pAdaptor cord (stereo mini jack-pin plugq2, RFX3655)
pLarge stereo plug Adaptor (6.3 mm diameter)
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
This product may receive radio interference caused
by mobile telephones during use. If such interference
is apparent, please increase separation between the
product and the mobile telephone.
RQT6634
9
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
En
RQT6634-E
F0702KB1113
Loading...