Panasonic RP HD305B Users Manual

Basic Owner’s Manual

Manuel d’utilisation Fonctions de base

Digital Wireless Stereo Headphones

Casque d’écoute stéréo sans fil numérique

RP-HD305B

Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use.

Nous vous remercions d’avoir arrêté votre choix sur cet appareil. Il est recommandé de lire attentivement ce manuel avant d’utiliser l’appareil et de le conserver pour consultation ultérieure.

If you have any questions, visit:

In the U.S.A.: http://shop.panasonic.com/support

In Canada: www.panasonic.ca/english/support

Pour toute assistance supplémentaire, visitez :

www.panasonic.ca/french/support

Model No. / Modèle

TQBM0496

F0319SK0

 





Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102-5490

http://shop.panasonic.com

Printed in China/Imprimé en Chine

English

More detailed operating instructions are available in “Owner’s Manual (PDF format)”. To read it, download it from the website. https://panasonic.jp/support/global/ cs/accessories/oi/rp_hd300b/

• Click the desired language.

Français

Un mode d’emploi plus détaillé est disponible dans “Manuel d’utilisation (format PDF)”. Pour le lire, le télécharger depuis le site web. http://panasonic.jp/support/global/cs/accessories/oi/ rp_hd305b/

• Cliquer sur la langue souhaitée.

English

Expressions used in this document

• The product illustrations may differ from the actual product.

Français

Expressions utilisées dans ce document

• Les illustrations du produit peuvent différer du produit réel.

until 2019/4/1

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

www.panasonic.com

English

Accessories

Please check and identify the supplied accessories.

Only for U.S.A.: To order accessories, refer to “Limited Warranty” on the rear page. Only for Canada: To order accessories, contact the dealer from whom you have made your purchase.

1 x USB charging cord 1 x Detachable cord

Maintenance

Clean this unit with a dry and soft cloth.

• Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed or the coating to come off.

Keeping the battery performance

• During the long period of disuse, full charge this unit once every 6 months to keep the battery performance.

Français

Accessoires

Vérifier et identifier les accessoires fournis.

Pour commander des accessoires, contacter le revendeur. 1 x cordon de charge USB

1 x cordon détachable

Entretien

Nettoyer cet appareil avec un chiffon doux et sec.

• Ne pas utiliser de solvants, comme la benzine, du diluant, de l'alcool, des détergents de cuisine, etc. Cela pourrait modifier l'apparence du boîtier externe ou décoller son revêtement.

Autonomie de la batterie

• Lors d'une longue période de non-utilisation, charger complètement cet appareil une fois tous les 6 mois pour préserver l'autonomie de la batterie.

English

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.

1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over. 13 Unplug this apparatus during lightning storms

or when unused for long periods of time. 14 Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

Safety precautions

A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

This device complies with Part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. FCC ID: ACJ-RP-HD305B Model: RP-HD305B IC: 216A-RPHD305B

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption ratio (SAR).

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Suppliers Declaration of Conformity Trade Name: Panasonic Model No.: RP-HD305B

Responsible Party: Panasonic Corporation of North America

Support Contact: http://shop.panasonic.com/support

THE FOLLOWING APPLIES ONLY IN CANADA.

CAN ICES-3(B)/NMB-3(B)

∫ Unit

WARNING:

To reduce the risk of fire, electric shock or product damage,

• Do not expose this unit to rain, moisture, dripping or splashing.

• Do not place objects filled with liquids, such as vases, on this unit.

• Use the recommended accessories.

• Do not remove covers.

• Do not repair this unit by yourself. Refer servicing to qualified service personnel.

• Avoid using or placing this unit near sources of heat.

• Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.

• Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites.

• Keep this unit away from something susceptible to the magnetism. Such devices as a clock may not operate correctly.

CAUTION!

To reduce the risk of fire, electric shock or product damage,

• Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.

Two Riverfront Plaza, Newark, NJ 07102-5490

∫ Allergies

• Discontinue use if you experience discomfort with the ear pads or any other parts that directly contact your skin.

• Continued use may cause rashes or other allergic reactions.

Use only the supplied USB charging cord when connecting to a computer.

CONFORMS TO UL STD. 60065 CERTIFIED TO CSA STD. C22.2 NO. 60065 CONFORME À LA NORME CAN/CSA

3123480

Remove the right ear pad to view authentication information. (1) Authentication information (a) is indicated on the speaker plate portion (b), which becomes visible when the right ear pad (R side) is removed. (2) To attach the ear pad, fit the part d of the ear pad into the part c. (3) Do not pull the ear pad with force when attaching or removing.

C22.2 NO. 60065



The Bluetooth Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.

Siri is a trademark of Apple Inc., registered in the U.S. and other countries. QR Code is a registered trademark of DENSO WAVE INCORPORATED. Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its

subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.

Other system names and product names appearing in this document are in general the registered trademarks or trademarks of the respective developer companies. Note that the

word mark and logos are registered trademarks owned by

mark and ® mark do not appear in this document.



 

Limited Warranty (ONLY FOR U.S.A.)

Panasonic Products Limited Warranty

Limited Warranty Coverage

If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.

Product or Part Name Parts Labor

Headphones/ Earphones/Headset

All included Accessories

During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States. This warranty is extended only to the original purchaser of a new product which was not sold “as is”.

Mail-In Service--Online Repair Request

Online Repair Request

To submit a new repair request and for quick repair status visit our Web Site at http://shop.panasonic.com/support

When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.

Limited Warranty Limits and Exclusions

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.

(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to:

Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

1 year Not Applicable

90 days Not Applicable

as Panasonic is committed

As of April 2017

Limited Warranty (ONLY FOR CANADA)

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT – LIMITED WARRANTY

EXCHANGE PROGRAM

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.

Accessories One (1) year

This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.

IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE REQUIRED

LIMITATIONS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Authorized Servicer, or damage that is attributable to acts of God.

Dry cell batteries are also excluded from coverage under this warranty.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.)

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory.

CONTACT INFORMATION

For product operation and information assistance, please visit our Support page:

For defective product exchange within the warranty period, please contact the original dealer.

The serial number of this product can be found on the left side of the headphones. Remove the left ear pad to see it. Please note them in the space provided below and keep for future reference. MO DEL NU MBE R R P-H D305B SERIAL NUMBER

User memo:

DATE OF PURCHASE DEALER NAME DEALER ADDRESS

TELEPHONE NUMBER

www.panasonic.ca/english/support

Français

IMPORTANTES MISES EN GARDE

Avant d’utiliser l’appareil, lire attentivement les instructions qui suivent. Se conformer tout particulièrement aux avertissements inscrits sur l’appareil et aux consignes de sécurité indiquées ci-dessous. Conserver le présent manuel pour consultation ultérieure.

1 Lire attentivement ces instructions. 2 Conserver ces instructions. 3 Lire toutes les mises en garde. 4 Suivre toutes les instructions. 5 Ne pas utiliser cet appareil près d’une source d’eau. 6 Ne nettoyer qu’avec un chiffon sec. 7 Ne pas bloquer les évents d’aération. Installer l’appareil selon les

instructions du fabricant.

8 Ne pas installer l’appareil près d’un appareil de chauffage tel

qu’un radiateur, une cuisinière, un registre de chaleur ou tout dispositif émettant de la chaleur (y compris un amplificateur).

9 Pour des raisons de sécurité, ne pas modifier la fiche polarisée

ou celle de mise à la terre. Une fiche polarisée est une fiche à deux lames, dont une plus large. Une fiche de mise à la terre est une fiche à deux lames avec une broche de masse. La lame plus large ou la broche de masse procure une protection accrue. Si ce genre de fiche ne peut être inséré dans une prise de courant, communiquer avec un électricien pour remplacer la prise.

10 S’assurer que le cordon est placé dans un endroit où il ne risque

pas d’être écrasé, piétiné ou coincé. Faire particulièrement attention à ses extrémités de branchement, y compris sa fiche.

11 N’utiliser que les accessoires ou périphériques recommandés

par le fabricant.

12 N’utiliser l’appareil qu’avec un chariot, meuble,

trépied, support ou table recommandé par le fabricant ou vendu avec l’appareil. Lors de l’utilisation d’un chariot, le déplacer avec le plus grand soin afin d’éviter tout dommage.

13 Débrancher cet appareil lors d’un orage ou en

cas de non-utilisation prolongée.

14 Confier l’appareil à un technicien qualifié pour toute

réparation : cordon d’alimentation ou fiche endommagé, liquide renversé ou objet tombé dans l’appareil, exposition à la pluie ou à une humidité excessive, mauvais fonctionnement ou échappement de l’appareil.

Précautions de sécurité

Uniquement pour les États-Unis et le Canada

L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY.

CE QUI SUIT NE S’APPLIQUE QU’AUX ÉTATS-UNIS ET AU CANADA.

Le présent appareil est conforme à la partie 15 des règles de la FCC et aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. FCC ID : ACJ-RP-HD305B Modèle : RP-HD305B IC : 216A-RPHD305B Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition radioélectriques (RF) de la FCC et les lignes directrices d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation du débit d’absorption spécifique (DAS).

CE QUI SUIT NE S’APPLIQUE QU’AU CANADA.

CAN ICES-3(B)/NMB-3(B)

∫ Appareil

ATTENTION :

Pour réduire les risques d’incendie, de chocs électriques ou de dommages à l’appareil,

• Ne pas exposer cet appareil à la pluie, à l’humidité, aux gouttes ou aux éclaboussures.

• Ne pas placer d’objet rempli de liquide, comme des vases, sur cet appareil.

• Utiliser les accessoires recommandés.

• Ne pas retirer les couvercles.

• Ne pas réparer cet appareil par soi-même. Référer la réparation à un personnel de service qualifié.

• Éviter d’utiliser ou de placer cet appareil près d’une source de chaleur.

• Ne pas l’utiliser lors de la conduite d’un véhicule motorisé. Cela peut créer un danger pour le trafic, et c’est illégal dans plusieurs régions.

• Ne pas écouter avec cet appareil à un volume élevé dans les endroits où vous devez entendre des sons provenant du milieu environnant pour la sécurité, comme les passages à niveau et les chantiers de construction.

• Keep this unit away from something susceptible to the magnetism. Such devices as a clock may not operate correctly.

• When using this unit in an airplane, heed the instructions given by the airline company. Some airlines may forbid your using the unit. For further details, contact the airline you will be flying with.

ATTENTION

Pour réduire les risques d’incendie, de choc électrique ou de dommages à l’appareil,

• Ne pas installer cet appareil dans une bibliothèque, une armoire ou tout autre espace confiné. S’assurer que la ventilation de l’appareil est adéquate.

∫ Allergies

• Toute utilisation doit cesser si l’on rencontre un inconfort avec les coussinets ou toute autre pièce touchant directement la peau.

• Une utilisation continue peut provoquer des éruptions cutanées ou d’autres réactions allergiques.

Il se peut que cet appareil reçoive des interférences provenant de téléphones cellulaires pendant son utilisation. Si de telles interférences se produisent, éloigner l’appareil du téléphone cellulaire.

Garder l’adaptateur pour avion hors de portée des enfants pour éviter qu’ils ne l’avalent.

Utiliser uniquement le cordon de charge USB fourni lors de la connexion à un ordinateur.

Retirer le coussinet d'oreille droit pour afficher les informations d'authentification. (1) Les informations d'authentification (a) sont indiquées sur la plaque d'enceinte (b), qui devient visible lorsque l'oreillette droite (côté D) est retirée. (2) Pour fixer le coussinet d'oreille, insérer la partie d du coussinet d'oreille dans la partie c. (3)

Do not pull the ear pad with force when attaching.

La marque et les logos Bluetooth® sont des marques déposées appartenant à Bluetooth SIG, Inc. et toute utilisation de telles marques par Panasonic Corporation est sous licence. Les autres marques de commerce et dénominations commerciales appartiennent à leurs propriétaires respectifs.

Siri es una marca comercial de Apple Inc., registrada en Estados Unidos y otros países.

QR Code est une marque déposée de DENSO WAVE INCORPORATED. LDAC et le logo LDAC sont des marques de commerce de Sony

Corporation. Qualcomm aptX est un produit de Qualcomm Technologies, Inc. et/ou de

ses filiales. Qualcomm est une marque de commerce de Qualcomm Incorporated, enregistrée aux États-Unis et dans d'autres pays. aptX est une marque de commerce de Qualcomm Technologies International, Ltd, enregistrée aux États-Unis et dans d'autres pays.

Les autres noms de système et de produits figurant dans ce document sont en général les marques déposées ou les marques de commerce des entreprises de développement respectives. Noter que les marques TM et ® n’apparaissent pas dans ce document.

Certificat de garantie limitée (Pour le Canada seulement)

Panasonic Canada Inc.

5770, Ambler Drive, Mississauga (Ontario) L4W 2T3

PRODUIT PANASONIC – GARANTIE LIMITÉE

PROGRAMME DE REMPLACEMENT

Panasonic Canada Inc. garantit que ce produit est exempt de défauts de matériaux et de main-d’œuvre dans un contexte d’utilisation normale pendant la période indiquée ci-après à compter de la date d’achat original et, dans l’éventualité d’une défectuosité, accepte, à sa discrétion, de (a) réparer le produit avec des pièces neuves ou remises à neuf, (b) remplacer le produit par un produit neuf ou remis à neuf d’une valeur équivalente ou (c) rembourser le prix d’achat. La décision de réparer, remplacer ou rembourser appartient à Panasonic Canada Inc.

Accessoires Un (1) an

La présente garantie n’est fournie qu’à l’acheteur original d’un des produits de marque Panasonic indiqués plus haut, ou à la personne l’ayant reçu en cadeau, vendu par un détaillant Panasonic agréé au Canada et utilisé au Canada. Le produit ne doit pas avoir été “vendu tel quel” et doit avoir été livré à l’état neuf dans son emballage d’origine.

POUR ÊTRE ADMISSIBLE AUX SERVICES AU TITRE DE LA PRÉSENTE GARANTIE, LA PRÉSENTATION D’UN REÇU D’ACHAT OU DE TOUTE AUTRE PIÈCE JUSTIFICATIVE DE LA DATE D’ACHAT ORIGINAL, INDIQUANT LE MONTANT PAYÉ ET LE LIEU DE L’ACHAT, EST REQUISE.

RESTRICTIONS ET EXCLUSIONS

La présente garantie COUVRE SEULEMENT les défaillances attribuables à un défaut des matériaux ou à un vice de fabrication et NE COUVRE PAS l’usure normale ni les dommages esthétiques. La présente garantie NE COUVRE PAS NON PLUS les dommages subis pendant le transport, les défaillances causées par des produits non fournis par Panasonic Canada Inc., ni celles résultant d’un accident, d’un usage abusif ou impropre, de négligence, d’une manutention inadéquate, d’une mauvaise application, d’une altération, d’une installation ou de réglages impropres, d’un mauvais réglage des contrôles de l’utilisateur, d’un mauvais entretien, d’une surtension temporaire, de la foudre, d’une modification, de la pénétration de sable, de liquides ou d’humidité, d’une utilisation commerciale (dans un hôtel, un bureau, un restaurant ou tout autre usage par affaires ou en location), d’une réparation effectuée par une entité autre qu’un centre de service Panasonic agréé ou encore d’une catastrophe naturelle.

Les piles sèches sont également exclues de la présente garantie.

CETTE GARANTIE LIMITÉE ET EXPRESSE REMPLACE TOUTE AUTRE GARANTIE, EXPRESSE OU IMPLICITE, INCLUANT LES GARANTIES IMPLICITES DU CARACTÈRE ADÉQUAT POUR LA COMMERCIALISATION ET UN USAGE PARTICULIER. PANASONIC CANADA INC. N’AURA D’OBLIGATION EN AUCUNE CIRCONSTANCE POUR TOUT DOMMAGE DIRECT, INDIRECT OU CONSÉCUTIF RÉSULTANT DE L’UTILISATION DE CE PRODUIT OU DÉCOULANT DE TOUTE DÉROGATION À UNE GARANTIE EXPRESSE OU IMPLICITE. (À titre d’exemples, cette garantie exclut les dommages relatifs à une perte de temps, le transport jusqu’à et depuis un centre de service agréé, la perte ou la détérioration de supports ou d’images, de données ou de tout autre contenu en mémoire ou enregistré. Cette liste n’est pas exhaustive et n’est fournie qu’à des fins explicatives.)

Certaines juridictions ne reconnaissent pas les exclusions ou limitations de dommages indirects ou consécutifs, ou les exclusions de garanties implicites. Dans de tels cas, les limitations stipulées ci-dessus peuvent ne pas être applicables. La présente garantie vous confère des droits précis; vous pourriez aussi avoir d’autres droits pouvant varier selon votre province ou territoire de résidence.

DEMANDE DE RENSEIGNEMENTS

Pour tout renseignement sur les produits et de l’assistance technique, veuillez visiter notre page Soutien :

Pour le remplacement d’un produit défectueux couvert par la garantie, veuillez communiquer avec le revendeur d’origine.

Le numéro de série de ce produit peut être trouvé sur le côté gauche du casque. Retirer le coussinet de gauche pour le voir. Veuillez le noter dans l’espace fourni ci-dessous, et conserver le tout pour référence future. NU MÉ RO DE MO DÈ LE R P- HD 305B NUMÉRO DE SÉRIE

Homologation :

DATE D’ACHAT DÉTAILLANT ADRESSE DU DÉTAILLANT

Nº DE TÉLÉPHONE

www.panasonic.ca/french/support







English

A Part names

1 Audio input terminal 2 [SOUND] button 3

[i] button

4 [1/;/ ] button 5 [j] button 6 Charging terminal (DC IN) 7 Power/pairing LED











8 [Í/I ( )] button*

Microphone

Ear pads Raised dot indicating the left side

* Í/I: Standby/ON

B Charging

The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit.

Connect this unit to a computer (a) using the USB charging cord (supplied) (b).

• The power/pairing LED (c) lights in red when charging is in progress. When charging is completed, the power/pairing LED will go out.

• It takes approx. 5 hours to charge the battery from empty to full.

• Check the direction of the terminals and plug in/out straight holding onto the plug. terminal if it is plugged in obliquely or in wrong direction.)

• It is not possible to turn the power on or connect to Bluetooth® devices during charging.

• Make sure the computer is turned on and is not on standby or sleep mode.

• Do not use any other USB charging cords except the supplied one.

• When the battery level starts to run low, the blinking power/pairing LED will turn from blue to red, and as it drops further, you will be notified by one beep every 1 minute* When the battery runs out, an English guidance message will be heard and the power will turn off. * If you press [Í/I ()] twice quickly, an English guidance

(

It may result in malfunction by the deforming of the

message will be heard and you can check the battery level.

C Turning the power on/off

Press and hold [Í/I ( )] (a) of this unit for approx.

















3 seconds until the power/pairing LED (blue) (b) blinks.

• A beep will sound, and the power/pairing LED (blue) will blink slowly.

To turn the power off

Press and hold [Í/I ( )] for approximately 3 seconds.

English guidance message will be heard, and the power will be

 

Bluetooth

Bluetooth ON

turned off.

• If the unit is not connected to a Bluetooth® device, an English guidance message will be heard andturn off the unit automatically approximately 5 minutes after you have stopped using it. (Auto power off)

D Connecting a Bluetooth® device

∫ Bluetooth® pairing

1 In the power-off state, press and hold [Í/I ( )] of this unit

until the power/pairing LED blinks.

– When pairing a device for the first time:

approx. 3 seconds

– When pairing a second or subsequent devices:

approx. 5 seconds

• This unit will start to search for a Bluetooth® device to connect to, and the power/pairing LED will light alternately in blue and red.

2 Turn on the power of the Bluetooth

Bluetooth

3 Select “RP-HD305B” (a) from the Bluetooth

menu.

• If prompted for a passkey, input the passkey “0000 (four zeros)”

• When the power/pairing LED (blue) blinks twice every approx.

• If connection to a device is not established within approximately 5 minutes, the unit will be turned off. Perform pairing again.

function.

of this unit.

2 seconds, pairing (registration) is completed. (Connection established)

device, and enable the

device’s



RP-HD305B









∫ Connecting a paired Bluetooth® device

1 Turn on this unit. 2 Perform steps 2 and 3 of “Bluetooth

• When the power/pairing LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established)

pairing”. (l above)

E Using the headphones

When using the functions below that are indicated with the [ ] mark, connect the Bluetooth

∫ Listening to music [] Select and play the music on the Bluetooth

• The unit’s headphones will output the music or the audio of the video being played back.

∫ Remote controlling (Available only if your Bluetooth®

device supports “AVRCP” Bluetooth



(Operation example) Play / Pause: Press [1/;/] (a). Increase the volume: Press [i] (b). Decrease the volume: Forward to the start of

next track: Press Return to the start of

current track: Press Fast forward: Press

Fast rewind: Press

• The volume can be adjusted in 31 levels (16 levels during calls). When the maximum or minimum volume is reached, a beep will sound.

∫ Selecting the sound mode []

This changes the sound quality of the music or video being played back.

Press the [SOUND] button on this unit.

• Each press of this button changes the sound quality.

– Bass Enhancer : Produces a more dynamic sound effect

with enhanced bass.

– Clear Voice : Produces a sound effect which makes human

voices, such as vocals and dialogues, clear to listen to.

– OFF : Turns off sound effects.

• The setting immediately before the power is turned off is stored.

• You will be notified by audio guidance when the mode is switched.

• This may not be effective depending on the music or video being played back.

device and the unit.

profiles) []

Press [j] (c).

[1/;/] twice quickly.

[1/;/] three times quickly. [1/;/] twice quickly; hold the

second press.

[1/;/] three times quickly;

hold the third press.

device.

∫ Making a phone call []

1 Press [1/;/] (a) on the unit and answer the incoming

call.

• (HFP only) To reject the incoming call, press [1/;/ ] twice quickly.

2 Start talking. 3 Press [1/;/] to end the phone call.

• (HFP only) It may be difficult to hear phone conversations when the unit is used in locations with loud ambient noise or in outdoor or other locations exposed to powerful winds. In that case, change the calling location or switch the calling device to the Bluetooth enabled phone to continue the call.(Press [1/;/ ] on the unit twice quickly to switch.)

• You can have the Bluetooth using the microphone of the unit and an app of the Bluetooth enabled phone.

(

l below, “Activating a voice functions”)

enabled phone make phone calls by

∫ Activating a voice functions [] You can use a button on this unit to activate Siri or other voice functions on your smartphone or similar device.

Press and hold [1/;/]

is activated.

(a) on this unit until the voice function

∫ Using the detachable cord (supplied)

While the power is turned off or the battery has no remaining charge, this unit can be used as normal headphones by connecting the detachable cord (supplied). (c)

• If you connect the detachable cord (supplied) when connected via

• Noise may occur due to dirt on the plug. Clean the plug with a soft

• Do not use any other detachable cords except the supplied one.

Bluetooth

dry cloth if this occurs.

, the power will turn off.

∫ Restoring to the factory settings

Charge the battery before restoring the unit.

1 While the power is turned off, press and hold [Í/I ( )] for at

least 5 seconds until the LED will lighting alternately in blue and red.

2 While the power/pairing LED is lighting alternately in blue

and red, press [i] (b) and [j] (c) at the same time for at least 5 seconds.

• The default settings will be restored after the power/pairing LED (blue) blinks fast and the unit turns off.

• When pairing a device again, delete the registering information (Device: “RP-HD305B”) from the Bluetooth register this unit with the Bluetooth

To remove the battery when disposing

of this unit

The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled.

• When disposing of this unit, take out the battery

installed in this unit and recycle it.

• Disassemble after the battery runs out.

• Keep disassembled parts out of reach of children.

Regarding the handling of used batteries

• Insulate the terminals with adhesive tape or similar material.

• Do not disassemble.

device’s menu, and

device again. (l )

∫ Batteries

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

• Battery mishandling can cause electrolyte leakage which can damage items the leaked fluid comes into contact with. If electrolyte leaks from the battery, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body.

• When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

1 Insert a flat-head screwdriver into the groove on the

outward-facing side of the left headphone (a). 2 Use the flat-head screwdriver to pry up b. 3 Remove the battery, and cut off the wires one by one with

scissors.

Troubleshooting

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to “Customer Services Directory” on the front page if you reside in the U.S.A., or refer to “CONTACT INFORMATION” on the rear page if you reside in Canada.

No sound.

• Make sure that the unit and the Bluetooth® device are connected

correctly. (l)

• Check if music is playing on the Bluetooth® device.

• Make sure that the unit is turned on and the volume is not set too low.

• Pair and connect the Bluetooth® device and the unit again.

(l)

• Check if the Bluetooth® compatible device supports “A2DP” profile. For details on profiles, see “Listening to music” in “Owner’s Manual (PDF format)”. Also refer to the operating manual for the Bluetooth® compatible device.

• If there is more than one active Bluetooth® device around this unit, it may be connected to the wrong one, so check that it is connected to the correct one.

Low volume.

• Increase the volume of the unit. (l)

• Increase the volume on the Bluetooth® device.

Sound from the device is cut off. / Too much noise. / Sound quality is bad.

• Sound may be disrupted if signals are blocked. Do not fully cover this unit with the palm of your hand, etc.

• The device may be out of the 10 m (33 ft.) communication range. Move the device closer to this unit.

• Remove any obstacle between this unit and the device.

• Switch off any wireless LAN device when not in use.

The device cannot be connected.

• Delete the pairing information for this unit from the Bluetooth® device, then pair them again. (l)

You cannot hear the other person.

• Make sure that the unit and the Bluetooth® enabled phone are turned on.

• Check if the unit and the Bluetooth® enabled phone are connected.

(l )

• Check the audio settings of the Bluetooth® enabled phone. Switch the calling device to the unit if it is set to the Bluetooth® enabled phone.

(l )

• If the volume of the other person’s voice is too low, increase the volume of both the unit and the Bluetooth® enabled phone.

Cannot make a phone call.

• Check if the Bluetooth® compatible device supports “HSP” or “HFP” profile. For details on profiles, see “Listening to music” and “Making a phone call” in “Owner’s Manual (PDF format)”. Also refer to the operating manual for the Bluetooth

The unit does not respond.

• This unit can be reset when all operations are rejected. To reset the unit, connect the unit to a computer using the USB charging cord. (The pairing device information will not be deleted.)

• The power cannot be turned on when the detachable cord (supplied) is connected. (lRear page, )

Cannot charge the unit.

• Is the USB port you are currently using working properly? If your computer has other USB ports, unplug the connector from its current port and plug it into one of the other ports.

• If the measures mentioned above are not applicable, unplug the USB charging cord and plug it in again.

• If the charge time and operating time become shortened, the battery may have run down. (Number of charging times of the installed battery: Approximately 300)

The power/pairing LED does not light during charging. / Charging takes longer.

• Is the USB charging cord connected firmly to the USB terminal of the computer? (

• Make sure to charge in a room temperature between 10 oC and 35 oC (50 oF and 95 oF).

The power does not turn on.

• Is the unit being charged? The power cannot be turned ON during charging. (l )

• The power cannot be turned on when the detachable cord (supplied) is connected. (lRear page, )

The audio guidance language has changed.

• The audio guidance language can be switched. (Press and hold [j] and [Í/I ( )] for at least 5 seconds.) It is possible to switch the audio guidance between English and French.

)

enabled phone.

Specifications

∫ General

Power supply DC 5 V, 300 mA

Operating time Charging time

(77 oF)) Charging temperature range 10 oC to 35 oC (50 oF to 95 oF) Operating temperature

range Operating humidity range 35 %RH to 80 %RH

Mass (Weight) Approx. 220 g (without cord)

∫ Bluetooth

Frequency band 2402 MHz to 2480 MHz Supported profiles A2DP, AVRCP, HSP, HFP Supported codec

(25 oC

section

∫ Headphone section

Impedance 34 Ω (Power off, with cord)

∫ Speaker section

Max input 1000 mW (IEC)

*1 It may be shorter depending on the operating conditions.

The time required to charge the battery from empty to full.

• Specifications are subject to change without notice.

(Internal battery: 3.7 V (Li-polymer))

Approx. 24 hours (SBC) Approx. 5 hours

0 oC to 40 oC (32 oF to 104 oF)

(no condensation)

SBC, AAC,

Qualcomm®aptXTM, Qualcomm Latency

aptX Low

Français

A Part names

a Right (R) side

1 Audio input terminal 2 [Multiple functions button] 3 Power/pairing LED 4 [Í/I ( )] button* 5 Charging terminal (DC IN) 6 Microphone 7 Ear pad 8 Raised dot indicating the left side

* Í/I: Standby/ON

B Charging

The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit.

Connect this unit to a computer (a) using the USB charging cord (supplied) (b).

• The power/pairing LED (c) lights in red when charging is in progress. When charging is completed, the power/pairing LED will go out.

• Charging will take approximately 4 hours from empty state to fully charged.

• Check the direction of the terminals and plug in/out straight holding onto the plug. terminal if it is plugged in obliquely or in wrong direction.)

• The power cannot be turned on while charging.

• Do not use any other USB charging cords except the supplied one.

• Make sure the computer is turned on and is not on standby or sleep mode.

• When the battery starts running low blinking power/pairing LED will turn from blue to red. A beep will sound every 1 minute.* When the battery runs out, the power will turn off. * If you press

C Turning the power on/off

Press and hold [Í/I ( )] (a) of this unit for approx. 3 seconds until the power/pairing LED (blue) (b) blinks.

• A guidance message will be heard, and the power/pairing LED (blue) will blink slowly.

To turn the power off

Press and hold [Í/I ( )] for approximately 3 seconds. message will be heard, and the power will be turned off.

• If the unit is not connected to a Bluetooth® device, a guidance message will be heard andturn off the unit automatically approximately 5 minutes after you have stopped using it. (Auto power off)

D Connecting a Bluetooth® device

∫ Bluetooth® pairing

1 In the power-off state, press and hold [Í/I ( )] of this unit

until the power/pairing LED blinks.

– When pairing a device for the first time:

– When pairing a second or subsequent devices:

• The unit starts to search for the Bluetooth® device for connection, and the power/pairing LED will blink in blue and red alternately.

2 Turn on the power of the Bluetooth

Bluetooth

3 Select “RP-HD305B” (a) from the Bluetooth

• If prompted for a passkey, input the passkey “0000 (four zeros)” of this unit.

• When the power/pairing LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established)

∫ Connecting a paired Bluetooth® device

1 Turn on this unit. 2 Perform steps 2 of “Bluetooth

• When the power/pairing LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established)

E Using the headphones

When using the functions below that are indicated with the [ ] mark, connect the Bluetooth

∫ Listening to music [] Select and play the music on the Bluetooth

• The unit's headphones will output the music or the audio of the video being played back.

∫ Remote controlling (Available only if your Bluetooth®

device supports “AVRCP” Bluetooth

(Operation example of [Multiple functions button] (a)) Play / Pause: Press [Multiple functions button]. Increase the volume: Slide the [Multiple functions button]

Decrease the volume: Slide the [Multiple functions button]

Forward to the start of next track: Press [Multiple functions button]

Return to the start of current track: Press [Multiple functions button]

Fast forward: Press the [Multiple functions button]

Fast rewind: Press the [Multiple functions button]

• The volume can be adjusted in 31 levels (16 levels during calls). When the maximum or minimum volume is reached, a beep will sound.

∫ Making a phone call []

1 Press [Multiple functions button] (a) on the unit and answer

the incoming call.

• (HFP only) To reject the incoming call, press [Multiple functions button] twice quickly.

2 Start talking. 3 Press [Multiple functions button] to end the phone call.

• You can have the Bluetooth using the microphone of the unit and an app of the Bluetooth enabled phone.

(

l right, “Activating a voice functions”)

∫ Activating a voice functions [] You can activate Siri

unit.

the

Press and hold [Multiple functions button]

(

It may result in malfunction by the deforming of the

during use of the unit, the

be heard and you can check the battery level.

approx. 3 seconds

approx. 5 seconds

[Í/I ()] twice quickly, a guidance message will

function.

towards “+”.

• Sliding and holding towards “+” allows you to continuously raise the volume.

towards “–”.

• Sliding and holding towards “–” allows you to continuously lower the volume.

twice quickly.

three times quickly.

twice quickly; hold the second press.

three times quickly; hold the third press.

enabled phone make phone calls by

or other voice functions with a button on

device, and enable the

pairing”. (l above)

device and the unit.

profiles) []

A guidance

device’s menu.

device.

(a) of this unit

∫ Making a multi-point connection [ ]

1 Register the unit to both the first Bluetooth® device and the

second Bluetooth

2 Connect the first Bluetooth

music playback, and the unit.

3 Connect the second Bluetooth

for calls, and the unit.

• For more details, including more specific setup instructions, refer to the operating instructions for the Bluetooth

• Only one Bluetooth

• When playing back music on an iOS device, be sure to connect the unit and that Bluetooth

• When connecting a device, such as one running an Android exclusively for calls, disable the “A2DP” setting. (Depending on the

Bluetooth

device.

device, which will be used for

device, which will be used

device can be connected for music playback.

device first.

device, this setting may not be available).

devices.

OS,

∫ Using the detachable cord (supplied)

While the unit is turned off, it can be used as normal headphones by connecting the detachable cord (supplied). (c)

• If you connect the detachable cord (supplied) when connected via

• The [Multiple functions button] does not work even while the unit is

• Noise may occur due to dirt on the plug. Clean the plug with a soft

• Do not use any other detachable cords except the supplied one.

Bluetooth

turned on.

dry cloth if this occurs.

, the Bluetooth® connection will be lost.

∫ Restoring to the factory settings

Charge the battery before restoring the unit.

1 While the unit is turned off, press and hold [Í/I ( )] for at

least 5 seconds until the power/pairing LED starts blinking alternately in blue and red.

2 While the power/pairing LED is blinking alternately in blue

and red, slide and hold the [Multiple functions button] towards “+” and at the same time press and hold [Í/I ( )] for at least 5 seconds.

• The default settings will be restored after the power/pairing LED (blue) blinks fast and the unit turns off.

• When pairing a device again, delete the registering information (Device: “RP-HD305B”) from the Bluetooth register this unit with the Bluetooth

To remove the battery when disposing

of this unit

The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled.

• When disposing of this unit, take out the battery

installed in this unit and recycle it.

• Disassemble after the battery runs out.

• Keep disassembled parts out of reach of children.

Regarding the handling of used batteries

• Insulate the terminals with adhesive tape or similar material.

• Do not disassemble.

device’s menu, and

device again. (l )

∫ Batteries

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

• When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

1 Remove the left ear pad. 2 Remove the 4 screws. 3 Remove the part a in step 2. 4 Remove the battery, and cut off the wires one by one with

scissors.

Troubleshooting

No sound.

• Make sure that the unit and the Bluetooth® device are connected

correctly. (l)

• Check if music is playing on the Bluetooth® device.

• Make sure that the unit is turned on and the volume is not set too low.

• Pair and connect the Bluetooth® device and the unit again.

(l)

Low volume.

• Increase the volume of the unit. (l)

• Increase the volume on the Bluetooth® device.

Sound from the device is cut off. / Too much noise. / Sound quality is bad.

• Sound may be disrupted if signals are blocked. Do not fully cover this unit with the palm of your hand, etc.

• The device may be out of the 10 m (33 ft.) communication range. Move the device closer to this unit.

• Remove any obstacle between this unit and the device.

• Switch off any wireless LAN device when not in use.

• A communication problem may arise if the battery is not fully charged. Charge the unit. (l)

• If the unit and the Bluetooth® device are connected via LDAC, the problem may be solved by changing the sound quality mode on the Bluetooth® device to give priority to connection. For details, refer to the operating instructions for the Bluetooth® device.

The device cannot be connected.

• Delete the pairing information for this unit from the Bluetooth® device, then pair them again. (l)

You cannot hear the other person.

• Make sure that the unit and the Bluetooth® enabled phone are turned on.

• Check if the unit and the Bluetooth® enabled phone are connected.

(l )

• Check the audio settings of the Bluetooth calling device to the unit if it is set to the Bluetooth

(l )

• If the volume of the other person’s voice is too low, increase the volume of both the unit and the Bluetooth® enabled phone.

Cannot make a phone call.

The unit does not respond.

• This unit can be reset when all operations are rejected. To reset the unit, connect the unit to a computer using the USB charging cord. (The pairing device information will not be deleted.)

Cannot charge the unit. / The power/pairing LED blinks during charging.

• Is the USB port you are currently using working properly? If your computer has other USB ports, unplug the connector from its current port and plug it into one of the other ports.

• If the measures mentioned above are not applicable, unplug the USB charging cord and plug it in again.

• If the charge time and operating time become shortened, the battery may have run down. (Number of charging times of the installed battery: Approximately 300)

The power/pairing LED does not light during charging. / Charging takes longer.

• Is the USB charging cord connected firmly to the USB terminal of the computer? (l)

• Make sure to charge in a room temperature between 10 oC and 35 oC (50 oF and 95 oF).

The power does not turn on.

• Is the unit being charged? The power cannot be turned ON during charging. (

)

enabled phone. Switch the

enabled phone.

Specifications

∫ General

Power supply DC 5 V, 300 mA

Operating time Charging time

(77 oF)) Charging temperature range 10 oC to 35 oC (50 oF to 95 oF) Operating temperature

range Operating humidity range 35%RH to 80%RH

Mass (Weight) Approx. 240 g (9.5 oz) (without

∫ Bluetooth

Frequency band 2402 MHz to 2480 MHz Supported profiles A2DP, AVRCP, HSP, HFP Supported codec

(25 oC

section

∫ Headphone section

Impedance 38 Ω (Power off, with cord)

∫ Speaker section

Max input 1000 mW (IEC)

*1 It may be shorter depending on the operating conditions. *2 Time taken to recharge from empty to full.

• Specifications are subject to change without notice.

(Internal battery: 3.7 V (Li-polymer))

Approx. 24 hours (SBC) Approx. 5 hours

0 oC to 40 oC (32 oF to 104 oF)

(no condensation)

cord)

SBC, AAC,

Qualcomm®aptXTM, Qualcomm

aptX-LL

for approx. 3 seconds.

Panasonic RP HD305B Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual