Panasonic PT-AX100 User Manual

S PEC F ILE
Product Number : PT-AX100
Product Name : High Definition Home Cinema Projector
As of August 2006. Specifications subject to change without notice.
< 1 >
S PEC F ILE
High Definition Home Cinema Projector

Specifications

Main Unit
LCD*1panel: Panel size:
Display method:
Drive method:
Pixels:
Pixel configuration:
2
Lamp*
:
Brightness:
Centre-to-corner uniformity ratio:
Contrast:
Lens:
Projection size:
Throw distance:
4
Optical axis shift*
Keystone correction range:
Installation:
Scanning frequency: S-Video/Video:
Terminals: HDMI IN:
On-screen menu languages:
:
PC (RGB):
YP
BPR (YCBCR):
S-VIDEO IN:
VIDEO IN:
PC (RGB) IN:
R, G, B:
HD/SYNC, VD:
COMPONENT IN:
Y:
B/PR (CB/CR):
P
SERIAL IN:
PT-AX100
0.7˝ diagonal (16:9 aspect ratio)
Transparent LCD panel (x 3, R/G/B)
Active matrix
921,600 (1,280 x 720) x 3, total of 2,764,800 pixels
Stripe
220 W UHM™ lamp
2,000 lumens or more (high power mode)
85 %
6,000:1*
Manual zoom/focus lens (1:1 –1:2), F 1.9–3.1, f 21.7– 43.1 mm
40– 200 inches (1,016 – 5,080 mm) diagonally, 16:9 aspect ratio
1.2–12.4 m (3´11˝–40´8˝) (16:9 aspect ratio)
Horizontal: ±25%, vertical: ±63%
Vertical: approx. ±30°
Ceiling/floor, front/rear
f
fH 15.63 kHz, fV 50 Hz (PAL, PAL-N, SECAM)
f
480i (525i): fH 15.75 kHz, fV 60 Hz
480p (525p): f
576i (625i): f
576p (625p): f
720/50p (750/50p): fH 45 kHz, fV 60 Hz
720/60p (750/60p): f
1080/24p (1125/24p): f
1080/50i (1125/50i): fH 28.125 kHz, fV 50 Hz
1080/50p (1125/50p): f
1080/60i (1125/60i): f
1080/60p (1125/60p): fH 67.5 kHz, fV 60 Hz
19-pin HDMI connector x 1
Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
RCA pin x 1, 1.0 Vp-p, 75 ohms
D-sub HD 15-pin (female) x 1,
0.7 Vp-p (1.0 Vp-p for Sync on G), 75 ohms
TTL, high impedance (positive/negative polarity)
RCA pin (Y, P
1.0 p-p, 75 ohms
0.7 Vp-p, 75 ohms
Mini DIN 8-pin (female) x 1, for external control (RS-232C compliant)
English, French, German, Spanish, Italian, Chinese, Korean, Russian,
Swedish, Danish, Norwegian, Polish, Czech, Hungarian, Portuguese,
Thai
3
(full on/full off, dynamic iris on)
H 15.75 kHz, fV 60 Hz (NTSC, NTSC4.43, PAL-M, PAL60)
H 30–70 kHz, fV 50 – 87 Hz
H 31.5 kHz, fV 60 Hz
H 15.63 kHz, fV 50 Hz
H 31.25 kHz, fV 50 Hz
H 37.5 kHz, fV 50 Hz
H 27.0 kHz, fV 24 Hz
H 56.3 kHz, fV 50 Hz
H 33.75 kHz, fV 60 Hz
B/CB, PR/CR) x 1
S PEC F ILE
High Definition Home Cinema Projector
Power supply:
Power consumption:
Dimensions (W x H x D):
Weight:
Operating temperature:
Operating humidity:
Remote Control
Power supply:
Operating range:
Dimensions (W x H x D):
Weight:
Optional Accessories
PT-AX100
100–240 V AC, 50/60 Hz
290 W (0.08 W in standby mode with fan stopped)
395 x 112 x 300 mm (15-17/32˝ x 4-13/32˝ x 11-25/32˝)*
4.9 kg (10.8 lbs)
0°–40°C (32°–104°F)
20%–80% (no condensation)
3 V DC (AA battery x 2)
Approx. 7 m (23´) (when operated directly in front of signal
receptor)
48 x 138 x 28 mm (1-7/8˝ x 7-27/32˝ x 1-3/32˝)
125 g (4.4 oz.)
Replacement lamp: ET-LAX100
Ceiling mount bracket: ET-PKX100
Serial adapter: ET-ADSER (DIN 8-pin/D-sub 9-pin)
5
Weights and dimensions shown are approximate.
Specifications subject to change without notice.
*1: The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-precision technolo-
gy designed to provide one of the finest possible images. Occasionally, a few pixels may remain turned on (bright) or turned off (dark). Please
note that this is an intrinsic characteristic of the manufacturing technology that affects all products using LCD technology.
*2: The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illu-
minate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on
individual lamp characteristics and usage conditions.
*3: In AI mode
*4: Shift range is limited during simultaneous horizontal and vertical shifting.
*5: Lens and legs not included.
Loading...
+ 4 hidden pages