Panasonic PT-AE500U User Manual

• High-Definition 1280 x 720 LCD panels for high quality images

• Integrated cinema quality circuitry

- 10-bit full digital processing and digital gamma correction

- Projector AI

- Dynamic Sharpness Control (DSC)

- Progressive Cinema Scan (3/2 pulldown)

• New Smooth Screen technology for film-like smooth image reproduction

• 2058-pattern user-adjustable picture equalizing including 6 picture mode (Normal,

Dynamic, Cinema 1, Cinema 2, Video, Natural)

• 850 lumens brightness and 1300:1** contrast ratio

• Vertical/horizontal keystone correction

• Quiet 27 dB*

•A wide variety of terminals featuring DVI with HDCP

- 1 -

S P E C F I L E

PRODUCT NO.: PT-AE500U

PRODUCT NAME: Home Cinema Projector

MAJOR FEATURES

* In AI mode

** In low lamp power mode

PT-AE500U

Home Cinema Projector

S P E C F I L E

Specifications

Power supply: 100–240 V AC, 50/60 Hz Power consumption: 180 W (1 W in standby mode with fan stopped) Optical system: Dichroic mirror separation/prism synthesis system LCD panel: Panel size: 0.7˝ (diagonal) (16:9 aspect ratio)

Display method: Transparent LCD panel (x 3, R/G/B) Drive method: Active matrix Pixels: 921,600 (1280 x 720) x 3, total of 2,764,800 pixels Pixel configuration: Stripe

Lens: Manual zoom/focus lens (1:1–1:1.2),

F 1.9–2.2, f 22.0–26.2 mm Lamp: 130 W UHM™ lamp Screen size: 1,016–5,080 mm (40–200 inches) diagonally, 16:9 aspect ratio Colors: Full color (16,777,216 colors) Color system: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL 60, SECAM Screen aspect ratio: 16:9 (4:3 compatible) Brightness: 850 lumens*

Center-to-corner uniformity ratio: 90% Contrast: 1300:1*2(full on/full off) Resolution: RGB: 1280 x 720 pixels (1920 x 1080 pixels with compression) Scanning frequency: RGB: Horizontal: 30–70 kHz, Vertical: 50 –87 Hz

YPBPR: 480i (525i): fH 15.75 kHz; fV 60 Hz

576i (625i): fH 15.63 kHz; fV 50 Hz

480p (525p): fH 31.5 kHz; fV 60 Hz

576p (625p): fH 31.25 kHz; fV 50 Hz

720p (750p): fH 45 kHz; fV 60 Hz

1080i (1125i): fH 33.75 kHz; fV 60 Hz

1080i (1125i): fH 28.125 kHz; fV 50 Hz

S-Video/Video: fH 15.75 kHz; fV 60 Hz (NTSC, NTSC 4.43, PAL-M, PAL 60)

fH 15.625 kHz; fV 50 Hz (PAL, SECAM, PAL-N) Optical axis shift: 17:1 (fixed) Keystone correction range: Vertical: approx. ±30°, horizontal: approx. ±30° Installation: Ceiling/desk, front/rear (menu selection) Terminals: DVI-D IN: DVI-D 24-pin x 1

PC (RGB) IN: D-sub HD 15-pin (female) x 1

R, G, B: 0.7 Vp-p (1.0 Vp-p for Sync on G), 75Ω HD/VD/SYNC: TTL, high impedance (positive/negative polarity)

COMPONENT IN: RCA pin (Y, PB/CB, PR/CR) x 1,

Y: 1.0 p-p, 75Ω PB/P

R (CB/CR): 0.7 Vp-p, 75Ω

VIDEO IN: RCA pin x 1, 1.0 Vp-p, 75Ω S-VIDEO IN: Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75Ω TRIGGER (out): M3 jack, (stereo mini)

When the power is turned on during projection: 12 V

When the power is turned off: 0 V Power cord length: 3 m Cabinet material: ABS/PC Dimensions (W x H x D): 280 x 85 x 278.5 mm (11˝ x 3-11/32˝ x 10-9/16˝) Weight: 2.9 kg (6.4 lbs.) Operating environment: Temperature: 0° – 40°C (32°–104°F)

Humidity: 20%– 80% (no condensation)

Remote Control Unit: Power supply: 3 V DC (UM-4 (AAA) battery x 2)

Operation range: Approx. 7 m when operated from directly in front of the signal receptor) Dimensions (W x H x D):

43 x 135 x 22 mm (1-11/16˝ x 5-5/16˝ x 7/8˝)

Weight: 70 g (2.5 oz.) (including batteries)

Supplied accessories: Power cord, Wireless remote control unit, Batteries for remote control

(UM-4 x 2), AV cable (3 m/9.9´), Carrying bag Optional accessories: Replacement lamp unit: ET-LAE500

Ceiling mount bracket: ET-PKE300 80˝–90˝ screen: ET-SR90CT 65˝–70˝ screen: ET-SR70CT

Weights and dimensions shown are approximate.

Specifications subject to change without notice.

As of September 2003

1: The figures are averages of all products at the time of shipment, and are indicated in accordance with JIS X6911: 2003

Data Projector Specifications Format. The measurement method and conditions are described in Appendix 2.

2: In AI mode

+ 2 hidden pages