Panasonic NV-FJ630PMP, NV-SJ430PMP User Manual
Video Cassette Recorder
NV-FJ630PMP
NV-SJ430PMP
Operating Instructions
Instrucciones de funcionamiento
VQT9630
Before attempting to connect, operate or adjust this
product, please read these instructions completely.
Dear Customer
Thank you for purchasing this Panasonic Video
Cassette Recorder.
We strongly suggest that you carefully study
the Operating Instructions before attempting to
operate the VCR, and that you note the listed
precautions.
CVC (Crystal View Control)
Indicator
The crystal view control function ensures that
you always obtain the optimum picture quality
so that you get the best picture automatically.
While the VCR is turned on, the CVC indication
is always displayed to show that the Crystal
View Control is activated.
Longrun Head System
This longrun head system enables
approximately 8,000 hours of recording/
playback with high quality images. Newly
developed head cylinder with narrower head
windows and tapered cylinder design
effectively protects heads from dust and
prevents head clogging. Plus, “Alumina” Head
Cleaner further enhanced cleaning efficiency.
≥Based on in-house tests with Panasonic
video cassettes. Actual head life may vary
according to conditions of use, tape type,
temperature, humidity, etc.
The serial number of this product can be
found on the rear panel. No others have the
same serial number as yours. You should
record the number and other vital
information here and retain this book as a
permanent record of your purchase to aid
identification in case of theft.
Date of Purchase
Dealer purchased from
Dealer Address
Dealer Phone No.
Model No. NV-FJ630PMP/
NV-SJ430PMP
Serial No.
Press POWER Í/I (POWER Í) to switch the
VCR from on to standby mode or vice versa. In
standby mode, the VCR is still connected to the
main AC power.
Plug in Auto Tuning
Antenna
1 Connect the
Antenna
cable.
All broadcasting stations that can be received in the area are automatically tuned and stored in
memory.
≥Do not turn off the VCR halfway. (See pages 11–14.)
2
Setting image illustration
TV
2 Connect the
3 Press POWER
Í/I button.
AC power
cord.
On Screen display
AUTO CHANNEL SET
PROCEEDING
END : MENU
2
Plug in Auto
Tuning is
completed.
Contents
As this equipment gets hot during use,
operate it in well ventilated place;
do not install this equipment in a
confined space such as a book case or
similar unit.
WARNING
TO REDUCE THE RISK OF FIRE
ELECTRIC SHOCK OR PRODUCT
DAMAGE, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND
ENSURE THAT NO OBJECTS FILLED
WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE
EQUIPMENT.
FOR YOUR SAFETY
∫ DO NOT REMOVE OUTER COVER.
To prevent electric shock, do not remove
cover.
No user serviceable parts inside. Refer
servicing to qualified service personnel.
IMPORTANT
Your attention is drawn to the fact that
recording of pre-recorded tapes or discs
or other published or broadcast material
may infringe copyright laws.
ACCESSORIES
1 pc. Infrared Remote Controller
1 pc. Coaxial Cable
2 pcs. “R6” size Batteries
1 pc. Power Plug Adaptor
Surge Absorber
For added protection for this product, these
models are equipped with new surge absorbing
circuit which prevents damage due to power
surges caused by induced lightning.
≥This function may not be effective for surges
by direct lightning.
Before Use
Controls and Connection Sockets ............ 04
Infra-red Remote Controller ....................... 06
≥Installing the Batteries ............................... 7
Setting Up
Connections ................................................. 08
Tuning the TV to your VCR ........................ 11
≥Plug in Auto Tuning ................................. 11
Storing TV Broadcasts in your VCR .......... 13
Setting the Remote Controller for
Operation of your TV ............................... 15
Setting the Clock of your VCR ................... 16
Settings Using the On Screen Display ...... 17
≥To Select the Desired Language ............ 20
Basic Operations
Playback ....................................................... 21
≥Jet Search ............................................... 22
≥Other Playback Functions ....................... 22
Manual Recording ....................................... 24
≥One-Touch Recording (OTR) .................. 26
≥Direct Recording ...................................... 26
Advanced Operations
Timer Recording .......................................... 27
≥4-Key Programming ................................ 27
Search Functions ........................................ 30
≥Jet Navigator ........................................... 30
≥Time Stamp Function .............................. 32
≥VHS Index Search System ..................... 33
≥Intro-Jet Scan .......................................... 33
Editing ........................................................... 34
≥Assembly Editing ..................................... 34
Other Functions ........................................... 35
≥Other Automatic Functions ..................... 35
Helpful Hints
Before Requesting Service ......................... 36
Usage Precautions ...................................... 38
Specifications .............................................. 40
3
Controls and Connection Sockets
This section describes in detail the function of each button, switch and connection socket.
NV-FJ630PMP
12
3 4 5
876
POWER
Í/ I Á
10
NV-SJ430PMP
12
POWER
Í/ I Á
JET REW
SEARCH
TIMER REC
PICTURE MODE
119
12
3 4 5
JET REW
SEARCH
TIMER REC
PICTURE MODE
EJECT
STOP PLAY
CVC
1413
19
VIDEO
L
AUDIO
R
)
IN (AV1
22
15
REW
FF
REC/OTR
5
6
5/
/6
16
17
18
20
21
IN
OUT
23
RF
24
OUT
876
EJECT
STOP PLAY
CVC
REW
FF
REC/OTR
5
6
/6
5/
15
10
119
12
1413
19
VIDEO
AUDIO
22
16
17
18
20
21
IN
OUT
)
OUT
IN (AV1
23
RF
24
4
FRONT
REAR
01 POWER Í/I (POWER Í) (‘ 11)
02 TIMER REC Á (TIMER Á) (‘ 27)
3 SEARCH (‘ 33)
4 JET REW 6 (‘ 22)
05 Cassette Compartment (‘ 21)
6 EJECT < (‘ 12)
87 STOP ∫ (‘ 21, 24)
08 PLAY 1 (‘ 21)
09 VIDEO IN (AV2) (‘ 34)
10 AUDIO IN (AV2) (‘ 34)
11 PICTURE MODE (‘ 18, 23)
12 Infra-red Remote Control Receiver
Window
13 Display
14 CVC Indicator (‘ 2)
15 I J (‘ 12, 35)
16 ¥ REC/OTR (‘ 26)
17 REW (REWIND) 6 (‘ 21)
18 FF (FAST FORWARD) 5 (‘ 21)
19 VIDEO IN (AV1) (‘ 34)
20 VIDEO OUT (‘ 9)
21 RF IN (‘ 8)
22 AUDIO IN (AV1) (‘ 8, 34)
23 AUDIO OUT (‘ 8, 9)
24 RF OUT (‘ 8)
POWER
DIRECT REC
Í
REPEAT
123
1
3
4
5
7809
AV
NAVI
SEARCH
PICTURE MODE
MENU
6
100
INDEX
11
8
17
OK
1 2 3 4
++–+
CH
DATE
–
PROG. / CHECK
AUDIO
ON OFF
CANCEL
SPEED
RESET OSD/DISPLAY
INPUT SELECT
VOLUME
+
–
REC
JET REW
VCR
TV
–
TIMER
Á
VCR/TV
Before Use
15
4
18
7
§
2
§ Set VCR/TV switch to VCR for using
POWER Í, the I and J buttons.
5
Infra-red Remote Controller
The remote control unit for this VCR is a
universal remote controller. As such, some of
its buttons are not used to operate this VCR.
VCR OPERATION
10
1
POWER
DIRECT REC
Í
123
2
3
4
5
6
4
7809
AV
NAVI
SEARCH
PICTURE MODE
MENU
1 2 3 4
++–+
DATE
–
PROG. / CHECK
AUDIO
REPEAT
5
INDEX
OK
ON OFF
CH
CANCEL
SPEED
RESET OSD/DISPLAY
INPUT SELECT
6
VOLUME
100
TIMER
VCR/TV
+
–
REC
JET REW
VCR
TV
–
Á
11
12
13
14
15
16§
17
03 Numeric Buttons (
‘‘
‘ 15, 24)
‘‘
Selects program positions of the VCR.
≥Ensure that VCR/TV switch is set to VCR.
0
9:
19:
109:
9
1
9
100
0
9
04 NAVI (‘ 30)
05 On Screen Display Menu Operation
Buttons (‘ 13)
MENU
OK
3421
06 Timer Recording Operation Buttons
(‘ 27–29)
DATE, CH, ON, OFF
PROG./CHECK
CANCEL
SPEED
TIMER Á
07 AUDIO (‘ 17)
18 RESET (‘ 18)
19 OSD/DISPLAY (‘ 17, 25)
7
8
9
§ Set VCR/TV switch to VCR for using the
numeric buttons.
01 Infra-red Transmitter
02 DIRECT REC (‘ 26)
6
10 REPEAT (‘ 23)
11 INPUT SELECT (‘ 34)
12 INDEX :, 9 (‘ 33)
13 No function
14 ;/D (PAUSE/SLOW) (‘ 21)
15 REC ¥ (‘ 24)
16 VCR/TV switch
17 VCR/TV (‘ 11)
TV OPERATION
§ Set VCR/TV switch to TV for using POWER
Í, the I and J buttons and the numeric
buttons.
18
19
20
POWER
DIRECT REC
Í
123
4
7809
AV
NAVI
SEARCH
PICTURE MODE
MENU
INPUT SELECT
REPEAT
21
22
6
5
INDEX
VOLUME
+
100
–
REC
JET REW
20 AV
Selects TV input or AV input.
21 I J
Selects the required program position (TV
station) of the TV.
≥Ensure that VCR/TV switch is set to TV.
22 VOLUME sNr
Adjusts the volume of the TV.
Installing the Batteries
Insert the batteries with the polarity (+ and -)
correctly aligned.
Before Use
OK
VCR
ON OFF
SPEED
–
TIMER
Á
VCR/TV
TV
1 2 3 4
++–+
DATE
CH
–
CANCEL
PROG. / CHECK
AUDIO
RESET OSD/DISPLAY
18 POWER Í
Press to switch the TV from on to standby
mode or vice versa. In standby mode, the
TV is still connected to the mains.
≥With some TV models, it may only be
possible to switch the TV to the standby
mode using this button.
In this case, use AV or the I and J
buttons to switch the TV on.
≥Ensure that VCR/TV switch is set to TV.
19 Numeric Buttons
Selects program positions of the TV.
≥Ensure that VCR/TV switch is set to TV.
§
+
+
Power Source for the Remote Controller:
The remote controller is powered by 2 “AA”,
“UM3” or “R6” size batteries. The life of the
batteries is about one year, although this
depends on the frequency of use.
Precautions for Battery Replacement:
≥Load the new batteries with their polarity (+
and -) aligned correctly.
≥Do not apply heat to the batteries, or an
internal short circuit may occur.
≥If you do not intend to use the remote
controller for a long period of time, remove
the batteries and store them in a cool and dry
place.
≥Remove spent batteries immediately and
dispose of them.
≥Do not use an old and a new battery together,
and never use an alkaline battery with a
manganese battery.
≥Do not use rechargeable batteries.
7
Connections
This section shows you how to connect the
VCR to an antenna, TV, etc.
When the VCR is turned on after connecting
the antenna cable and the AC power cord,
Plug in Auto Tuning starts automatically.
Basic Connections
The following connections are required to
record and play back the video cassette
through the TV.
Antenna (Not supplied)
TV Set (Not supplied)
1
2
Antenna Input Connector
VIDEO
L
AUDIO
R
)
OUT
IN (AV1
IN
OUT
RF
3
To mains supply
≥Use the plug adaptor supplied if it is needed to fit the shape of
the power outlet which will be used.
≥Connection to a Stereo Amplifier (NV-FJ630PMP only)
Stereo Amplifier
(Not supplied)
PLAYBACK
(Not supplied)
REC
)
OUT
IN (AV1
RF
IN
OUT
8
Connection to a TV using the Audio/Video Input Sockets
NV-FJ630PMP
To mains supply
4
TV Set (Not supplied)
Antenna Input
Connector
AUDIO IN VIDEO IN
2
3
TV Set (Not supplied)
Antenna Input
Connector
(Not supplied)
VIDEO
L
AUDIO
R
Antenna (Not supplied)
1
Setting Up
IN
OUT
)
OUT
IN (AV1
RF
Antenna (Not supplied)
1
NV-SJ430PMP
To mains supply
4
2
3
(Not supplied)
VIDEO
AUDIO
VIDEO INAUDIO IN
IN
OUT
)
OUT
IN (AV1
RF
9
Cable Connection
Cable-VCR-TV (For CATV/PAY
Channels Recording/Playback)
The VCR has an extended range, and can tune
the Low-Band, Mid-Band, Super-Band, HyperBand, Ultra-Band, and Special cable channels
(Channels A-5–A-1, A– W, AA–FFF, GGG–
WWW, WWWr1– WWWr12, 100– 125, 5A).
Also, the VCR can tune to any of the 56 UHF
channels (14–69). Refer to Storing TV
Broadcasts in your VCR on page 13.
BASIC Hook-Up
Since the VCR can tune Mid
and Super Bands, this
connection will provide the
reception of all cable channels
except those which are
intentionally scrambled.
The cable hook-up shown at the bottom left
allows VCR-TV functions except for viewing
one channel while recording another.
75 ohm Cables System
2-WAY
SPLITTER
IN
OUT2
IN
Switch Box°
°Not available from
our company.
Please contact your
cable company.
To the 75 ohm VHF
Input on the TV set
OUT1 IN
Cable TV
Converter Box
75 ohm Coaxial
OUT
Cables
Cable TV
Converter Box
OUT
75 ohm Coaxial Cable
However, if you subscribe to a special channel
which is scrambled you will probably have a
descrambler box for proper reception. The VCR
by itself cannot properly receive a scrambled
program since it does not contain a
descrambler. In order for the VCR to properly
receive a scrambled program, your existing
descrambler must be used. There are two
commonly used methods of connection in this
case.
Typical Cable System Hook Ups
with Cable Converter/Descrambler
Boxes
75 ohm Cable System
75 ohm Coaxial
Cables
10
Cable TV
Converter
BoxIN
OUT
To the 75 ohm VHF
Input on the TV set
The above cable hook-up allows VCR
functions, including viewing one channel while
recording another, but it requires two cable TV
Converter/Descrambler Boxes, one Switch Box
and one 2-Way Splitter.
Since the VCR has an extended range of
tuning, tuning-programing of non-scrambled
Mid-Band and Super-Band TV programs is
possible. When a cable converter or
descrambler box is connected to the VCR,
all timer-controlled recording functions will
continue to operate with the exception of
charging channels automatically. CATV
Channel selection will have to be performed
with the cable converter. Timer-controlled
recording from CATV Channels is therefore
limited to one channel at any given time.
Tuning the TV to your VCR
The VCR is fitted with its own tuner (just like a
normal TV) and can be preset to receive up to
IN
181 TV broadcast stations.
OUT
RF
3
POWER
DIRECT REC
Í
123
1
4
7809
AV
NAVI
SEARCH
PICTURE MODE
MENU
1 2 3 4
++–+
DATE
–
PROG. / CHECK
AUDIO
The VCR supplies a signal to the TV via the RF
coaxial cable on channel US3 or 4.
It is possible to view the video picture on your
TV in the same way that you watch TV
broadcasts.
If you have connected the VCR to the TV
through the video and audio input sockets, then
you do not need to follow the procedure below.
REPEAT
5
INDEX
OK
ON OFF
CH
CANCEL
SPEED
RESET OSD/DISPLAY
INPUT SELECT
6
VOLUME
100
–
TIMER
Á
VCR/TV
+
–
REC
JET REW
VCR
TV
2
Plug in Auto Tuning
1
Auto Tuning searches for TV stations from VHF
minimum to UHF maximum and memorizes
every tuned program position.
Notes:
≥If the VCR is turned on with the antenna not
connected, all channels are skipped.
≥When Auto Tuning is canceled halfway, Auto
Tuning is not executed even if the VCR is
turned off and then turned on again. In this
case, see page 12 “To Restart Plug in Auto
Tuning”.
1 Press POWER Í to turn on the TV and VCR
after connecting the antenna cable and the
AC power cord, Auto Tuning starts.
On Screen Display
Channel being
searched
AUTO CHANNEL SET
PROCEEDING
END : MENU
2
≥Auto Tuning will stop halfway by turning the
VCR off, pressing MENU, playback or a
power failure during Auto Tuning.
≥When there are 5 more CATV channels,
the antenna system CATV is automatically
selected; when there are 4 or fewer CATV
channels, the TV is selected. If a change is
required, conduct the resetting procedure
described in step 4 on page 13.
2 Press VCR/TV to select the VCR mode.
(continues on the next page)
Setting Up
When the VCR is turned on after unpacking
and connecting the antenna cable and the
AC power cord, Plug in Auto Tuning starts
automatically.
11
3 Select a program number on the TV which
you wish to use as the video viewing
channel. Then tune in the TV to the picture
from the screen being auto tuned or the
screen selected with the I and J buttons
of the VCR.
≥During Auto Tuning, the TV program
screen does not appear, and the Auto
Tuning screen appears instead.
On Screen Display
AUTO CHANNEL SET
PROCEEDING
END : MENU
2
AUTO TUNING IS
COMPLETED.
END: MENU
To Cancel Auto Tuning MidOperation
Press MENU during Auto Tuning. Auto Tuning
is cancelled.
To Restart Plug in Auto Tuning
1 Press EJECT < and remove the video
cassette.
If Auto Tuning stops halfway by turning the
VCR off, playback or a power failure:
1 Disconnect the mains lead and then
reconnect it.
2 Turn off the VCR and then turn it on.
≥Auto Tuning commences.
To Change the RF Output
Channel
In some rare cases after tuning the TV to your
VCR, interference may be visible on the
picture. To get rid of this interference, you can
manually adjust the RF output channel a few
channels up and down from the current setting.
The procedure is described below.
1 Hold down MENU for 5 seconds or more.
≥The VCR display changes as shown below
and the VCR picture on the TV displays
this pattern.
Panasonic VCR
2 Keep the I and J buttons on the VCR
pressed simultaneously for 3 seconds or
more during the VCR on.
≥The channel displayed on the VCR display
disappears for a moment then changes to
2.
Display Symbol
Disappears 2
3 Disconnect the mains lead and then
reconnect it.
4 Turn off the VCR and then turn it on.
Press VCR/TV to select the VCR mode.
≥Auto Tuning commences.
12
END: MENU
2 Enter the desired channel number (US3 or
US4) by the I and J buttons.
3()4
3 Press MENU to finish the setting mode.
4 Retune your TV to the new RF channel for
the VCR.
Note:
≥Even if the RF output channel has been
changed, it is not necessary to perform Auto
Tuning.
Storing TV Broadcasts in your VCR
Auto Tuning Using the On
Screen Display
The VCR is tuned automatically by Plug in Auto
Tuning. However, Auto Tuning using the On
Screen Display should be performed according
to the following method if necessary.
POWER
DIRECT REC
Í
123
4
7809
AV
NAVI
SEARCH
PICTURE MODE
MENU
1 2 3 4
++–+
DATE
–
PROG. / CHECK
AUDIO
Notes:
≥Auto Tuning searches for TV stations from
VHF minimum to UHF maximum and
memorizes every tuned program position.
Other program positions are skipped.
≥Auto Tuning takes three or more minutes to
complete its search.
≥If the VCR is not correctly tuned by Auto
Tuning, follow the procedure on the next
page.
REPEAT
5
INDEX
OK
ON OFF
CH
CANCEL
SPEED
RESET OSD/DISPLAY
INPUT SELECT
6
100
TIMER
VCR/TV
VOLUME
+
–
REC
JET REW
VCR
TV
–
Á
Preparations
≥Confirm that the TV is on and the VCR
viewing channel is selected.
≥Turn on the VCR and select any program
position except A1 or A2.
≥Press VCR/TV to select the VCR mode.
Operations
1 Press MENU.
2 Select CHANNEL SET
by pressing 3 or 4 and
then press OK.
3 Select ANTENNA
SYSTEM by pressing 3
or 4 and then press
OK.
4 Select the desired
system by pressing 3 or
4 and then press
MENU.
5 Select AUTO by
pressing 3 or 4 and
then press OK.
≥When Auto Tuning is
completed, the on
OSD MENU
≥LANGUAGE
CLOCK SET
CHANNEL SET
OPTION
SELECT
: , OK
END
:MENU
OSD MENU
LANGUAGE
CLOCK SET
≥CHANNEL SET
OPTION
SELECT
: , OK
END
:MENU
CHANNEL SET
≥ANTENNA SYSTEM
AUTO
MANUAL
SELECT
: , OK
END
:MENU
ANTENNA SYSTEM
≥TV
CATV
SELECT
:
END
:MENU
CHANNEL SET
ANTENNA SYSTEM
≥AUTO
MANUAL
SELECT
: , OK
END
:MENU
screen display
disappears and the
lowest channel position
at which a broadcast
can be tuned in is
AUTO CHANNEL SET
PROCEEDING
END :MENU
received.
Setting Up
2
13
Loading...