Panasonic NV-MV20, NV-HV55, NV-HV60, NV-HV65, NV-HV50 User Manual
Video Cassette Recorder
NV-HV60 Series (Hi-Fi) / NV-HV65 Series (Hi-Fi)
NV-HV55 Series (Hi-Fi) / NV-HV50 Series (Hi-Fi)
NV-MV20 Series (Mono) / NV-MV15 Series (Mono)
NV-SV120 Series (S-VHS, Hi-Fi)
625
VHS
PAL
PULL-OPEN
VPS / PDC
NV-SV120
INTELLIGENT TIMER
PROG PLAY
3D DNR
S-VHSET
Super VHS
EJECT
.
Hi-Fi STEREO SUPER LP
REC
TIMER CHECK
VHS
PAL
625
CH
TIMER REC
Operating Instructions
Contents page
Precautions 2
Warning 3
Remote control functions 4 - 5
Front Panel 6
Rear Panel 7
Connections / Settings 8
Auto Setup 9
Recording 10
Timer recording
Automatic SP/LP selection 11
VPS/PDC function 11
Timer recording 12-13
ShowView 14
INTELLIGENT TIMER 15
General functions 16 -17
Menu Overview 18
Manual Setup
Setting a new Channel 19
Changing the name of TV stations 20
Changing the order of TV stations 20
Creating a new station table 21
Shipping condition, factory defaults 21
Menu Others 22-23
Decoder 24
External recording control 25
Amplifier, NICAM sound system 26
NTSC playback 26
Batteries, Cassette erasure protection 27
Before requesting service 28 -29
Specifications 30 -31
Index 32
2
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully. Please keep this manual for future reference.
Precautions
Voltage: Only use power sources complying with the specifications (220-240 VAC, 50/60 Hz).
You may otherwise overload the unit and cause fire. Do not use DC power sources. Check
the source carefully when setting up the unit on a ship or other place where DC is used.
AC mains lead protection: Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire or electric shock.
Service: Do not attempt to repair this unit by yourself. If the sound fails, the display is off,
smoke escapes from the unit or any other problem occurs that is not described in these
operating instructions, disconnect the power supply and contact your dealer or an authorised
aftersales service centre.
Accessories Included (Remote control unit depends on the model)
Remote Control
N2QAKB000043/ N2QAHB000031
AC Mains Lead
RJA0043-1C
RF Coaxial Cable
Remote Control Batteries
AA, UM3 or R6
Operating Instructions
Guarantee Card
1
3
QA 0
N2 HB0 00
3K
4
0
0
0
A B 0
Q
2
N
Warning
NORSK
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT
DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND ENSURE THAT NO OBJECTS FILLED
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
CAUTION!
!
DO NOT INSTALL, OR PLACE THIS UNIT, IN A BOOKCASE, BUILT-IN
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT
IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR
FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS
AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION
VENTS.
!
DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
!
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED
CANDLES, ON THE UNIT.
!
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY
MANNER.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
ADVARSEL:
FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK STØT ELLER
SKADER PÅ PRODUKTET, MÅ DETTE APPARATET IKKE UTSETTES
FOR REGN, FUKTIGHET, VANNDRÅPER ELLER VANNSPRUT. DET
MÅ HELLER IKKE PLASSERES GJENSTANDER FYLT MED VANN,
SLIK SOM BLOMSTERVASER, OPPÅ APPARATET.
ADVARSEL!
!
APPARATET MÅ IKKE PLASSERES I EN BOKHYLLE, ET INNEBYGGET
KABINETT ELLER ET ANNET LUKKET STED HVOR VENTILASJONSFORHOLDENE ER UTILSTREKKELIGE. SØRG FOR AT GARDINER
ELLER LIGNENDE IKKE FORVERRER VENTILASJONSFORHOLDENE,
SÅ RISIKO FOR ELEKTRISK SJOKK ELLER BRANN FORÅRSAKET
AV OVERHETING UNNGÅS.
!
APPARATETS VENTILASJONSÅPNINGER MÅ IKKE DEKKES TIL MED
AVISER, BORDDUKER, GARDINER OG LIGNENDE.
!
PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE LYS, OPPÅ
APPARATET.
!
BRUKTE BATTERIER MÅ KASSERES UTEN FARE FOR MILJØET.
DETTE APPARATET ER BEREGNET TIL BRUK UNDER MODERATE
KLIMAFORHOLD.
This product may receive radio interference caused by mobile telephones
during use.If such interference is apparent, please increase separation
between the product and the mobile telephone.
Dette apparatet kan under bruk fange opp høyfrekvente forstyrrelser
forårsaket av en mobiltelefon som benyttes i nærheten. Hvis slik
forstyrrende påvirkning konstateres, bør mobiltelefonen benyttes på
større avstand fra dette apparatet.
3
Remote control functions
Some Panasonic TV sets accept control signals from the video recorder's
remote control unit. In the table, the TV buttons are marked with 'TV', the
video recorder buttons with 'VCR'.
Control menu
CH
I-TIMER
OSD menu selection buttons.
MENU
CH
EXIT
ENTER
VOLUME
TV
AV
VCR
OSD/DISPLAY
PROG PLAY AV LINK AUDIO
INDEX
MENU
I-TIMER
EXT LINK
PROG/CHECK
1 2 3
DATE
CH
A
CH
TRACKING/V-LOCK
RESET/CANCEL
CH
REC
EXIT
OFF TIMER
TIMER
SP/LP/EP
4
OFF
ON
B
Playback functions
Displays the menu.
Quits a menu.
Selects or saves a setting.
Playback
Fast winding / Forward and backward search
!
Goes from Stop into Fast Forward or Fast Rewind mode.
!
Starts the search for a frame during playback. Press button
twice to increase the speed of search (JET SEARCH).
Press the Playback button to quit the Search mode.
!
The unit keeps searching while the button is pressed.
Press Stop to stop recording, playing back or winding.
To eject a cassette: Press button for more than 3 seconds.
Still Playback:
Press button again or press the Playback button to quit.
Slow Playback:
In Playback mode.
Press for more than 2 seconds while in Playback
VCR
VCR
VCR
VCR
VCR
VCR
P. 17
VCR
VCR
P. 17
mode. Press the Playback button to quit .
4
EXT LINK
AV LINK
TV ASPECT
TV/TEXT
Stand-by/on switch /I
Press to switch the unit from on to stand-by mode or vice
versa. In stand-by mode, the unit is still consuming a small
amount of power.
Activates the recording timer for externally
controlled recording.
Toggles between TV reception and video playback
channel.
Changes the screen format.
Toggles between TV reception and video text
reception.
VCR
TV
VCR
P. 25
VCR
TV
TV
AUDIO
REC
CH
CH
PROG/CHECK
Audio mode
Record
TV :
Selects the AV input and navigates in
the teletext menu.
VCR:
Menu entries.
Displays the Timer menu.
VCR
P. 16
VCR
P. 10
VCR
TV
VCR
P. 12
TRACKING/V-LOCK
CH
INPUT SELECT
ShowView
PROG PLAY
Selects a programme memory location and inputs
the ShowView number. Example: 18=
Selects the TV set's AV port.
Channel selector
Tracking control of disturbed VCR image.
Volume control.
Toggles between AV inputs A1, A2 and A3.
Finds the start of a programme.
Displays the ShowView menu.
Plays back programmed recordings.
VCR
TV
TV
VCR
TV
TV
VCR
VCR
P. 16
VCR
P. 14
VCR
P. 13
VPS/PDC
SP/LP/EP
TIMER
I-TIMER
OFF TIMER
OSD/DISPLAY
RESET/CANCEL
Controls the beginning and end of a recording
session by a special signal.
Sets the tape speed.
Activates the recording timer.
Defines programmes transmitted to the same
program memory location at the same time.
Switches the unit into stand-by mode after the set
time of recording, playback or in Stop mode.
Press the button repeatedly to display the time,
tape counter or remaining tape.
RESET : Resets the counter to 0:00.00.
CANCEL: Clears an entry you made.
VCR / TV switch
VCR
P. 11
VCR
P. 10
VCR
P. 12
VCR
P. 15
VCR
P. 17
VCR
P. 10
VCR
VCR
TV
5
Front Panel
NV-SV120
3D DNR
PROG PLAY
INTELLIGENT TIMER
S-VIDEO
VIDEO L-MONO-AUDIO-R
AV3 IN
CVC Super
The CVC function provides
a picture of perfect quality.
The picture is automatically
rendered as clear and sharp
as possible.
3D DNR
To ensure high playback
picture quality with less noise.
EXT LINK
QUICK
ERASE
NV-HV60, NV-HV65, NV-HV55, NV-HV50, NV-MV20, NV-MV15
PROG PLAY
INTELLIGENT TIMER
QUICK
EXT LINK
ERASE
TIMER CHECK
NV-SV120
NV-SV120
.
Hi-Fi STEREO SUPER LP
3D DNR
PROG PLAY
3D DNR
EJECT
CH
INTELLIGENT TIMER
VHS
PAL
VPS / PDC
S-VHSET
625
Stand-by/on switch /I
Defines timer programmes.
Plays back programmed recordings.
3-Dimensional Digital Noise Reduction
(S-VHS only )
Ejects the cassette.
Selects a channel.
EXT LINK
Activates the recording timer for
externally controlled recording.
TIMER REC
TIMER CHECK
QUICK
ERASE
REC
TIMER CHECK
Activates the recording timer.
Displays the timer programme for verification.
Record button
Fast winding / jet search
Stop button
Playback button
QUICK
ERASE
Erases a cassette.
PULL-OPEN
INTELLIGENT TIMER
PROG PLAY
EXT LINK
EJECT
CH
TIMER REC
REC
Super VHS
EJECT
CH
TIMER REC
REC
6
Rear Panel
NV-SV120
AC IN~ = Power supply
SECTEUR~
AV2 (DECODER/DECODEUR/EXT)
AV1 (TV)
S-VIDEO = S-VIDEO output
OUT/SORTIE
VIDEO = VIDEO output
L/G = AUDIO output left channel
R/D = AUDIO output right channel
IN/ = Antenna input
ENT
OUT/ = Antenna output
SORTIE
AC
IN~
SECTEUR~
AV2 (DECODER/DECODEUR/EXT)
NV-HV60, NV-HV65, NV-HV55
AC
IN~
SECTEUR~
AV2 (DECODER/DECODEUR/EXT)
NV-HV50EC
AC
IN~
SECTEUR~
AV2 (DECODER/DECODEUR/EXT)
NV-MV20, NV-MV15, NV-HV50EG
AC
IN~
SECTEUR~
AV1 (TV)
AV1 (TV)
AV1 (TV)
AV1 (TV)
CONTROLE 8mm
AV OUT/SORTIE
VIDEO
S-VIDEO
OUT/SORTIE
AUDIO
OUT/SORTIE
AUDIO
(
AV2
IN/
ENT
RF/
L/G
ANT
OUT/
SORTIE
R/D
IN/
ENT
RF/
L/G
L/G
ANT
OUT/
SORTIE
R/D
IN/
ENT
RF/
ANT
OUT/
SORTIE
IN/
ENT
RF/
ANT
OUT/
SORTIE
7
Connections / Settings
VCR
21-pin Scart Cable
RF-Coaxial Cable
Aerial
Connect all the cables as shown in the illustration, then connect the AC Mains
lead (part of the package) to an AC wall outlet.
To be able to receive TV programmes it is mandatory to connect the RF-Coaxial
Cable even if the video recorder is connected by a 21-pin scart cable.
TV
If you decide to just use the RF-Coaxial Cable to connect the TV set you must
adjust the video output channel with the TV set's input channel.
!
Switch on the video recorder
!
Press the MENU button for approx. 7 seconds. The preset channel appears
on the display.
!
Tune the TV set until the test pattern appears.
If there is any interference select another channel for the TV set and
video recorder.
!
Press the CH button to change the channel (e.g. to 39).
!
Tune the TV set until the test pattern appears.
!
Press ENTER to confirm.
CH
8
Auto Setup
SV120 HV60 HV65 HV55 HV50 MV20 MV15
Country
: select : access
EXIT
: exit
Datum / Zeit
Clock set
AUTO : AUS
AUTO
Zeit : 12 : 00 : 00
Time : 12 : 00 : 00
Datum : 11. 6. 02
Date : 11. 6. 03
:wählen : anwählen
:select : access
MENU EXIT
MENU EXIT
: zurück : abbrechen
: return : exit
Datum / Zeit
Clock set
Zeit : 12 : 00 : 00
Time : 12 : 00 : 00
Datum : 11. 6. 02
Date : 11. 6. 03
:select : store
:wählen : speichern
EXIT
MENU EXIT
: exit
: zurück : abbrechen
ENTER
ENTER
ENTER
ENTER
ENTER
The VCR starts the automatic tuning.
(The search will take approx. 5 minutes to be completed.)
!
Switch on the video recorder.
!
Select a country.
!
ENTER
If the enu does not appear after switching on you can restart
Country m
The Country menu will be displayed.
Automatic Tuning (page 21). You can afterwards set date and time either
automatically or manually.
SV120 HV60 HV65 HV55 MV20 HV50 MV15
Manually setting Time / Date
!
AUTO - MANUAL
!
ENTER
!
Set Time and Date
!
ENTER
!
Press to return to the Menu screen.
D
Mind that a wrong date or time will influence the programmed recording of TV
MENU
,
programmes (don't forget to change summer- and wintertime).
SV120 HV60 HV65 HV55 MV20 HV50 MV15
After running the automatic tuning, you must manually set the date and time.
!
Set Time and Date ,
!
ENTER
9
Recording
SV120 HV60 HV65 HV55 HV50 MV20 MV15
10
REC
Set the TV set to the video channel and insert a cassette into the video recorder;
make sure that the cassette's protection tab is still in.
!
Select a channel to record from.
Select the AV channel if you are recording via the 21-pin scart cable.
!
!
!
REC
Press to start recording.
Press the Stop button to stop recording.
To pause recording:
The function will switch itself off after approx. 5 minutes to protect the video heads.
!
To resume recording:
D
Recordings in the S-VHS or S-VHS ET REC mode are supported by the PAL
TV system only. (Only SV120, page 23)
SV120 HV60 HV65 HV55 HV50 MV20 MV15
SP
VCR
OSD/DISPLAY
Tape Remain counter/indicator
The display of the video recorder shows: time - counter - tape remain.
The start of a cassette is indicated as -----.
!
OSD/DISPLAY RE'
Press until ' is displayed.
SV120 HV60 HV65 HV55 HV50 MV20 MV15
!
SP
VCR
SP/LP/EP
Prior to starting the recording session, press to set the tape speed.SP/LP/EP
SP : normal recording time - optimal picture quality
LP : double recording time - simple picture quality
EP : triple recording time - reduced picture quality
D
When you play back LP or EP recordings, some cassettes (e.g. type)
may produce interference. This is not indicative of a malfunction.
E-300
Loading...