Panasonic KX-TS600FXB, KX-TS600FXW User Manual

TS600FX.book Page 1 Wednesday, April 5, 2006 10:27 AM
Integrated Telephone System
Operating Instructions
Pulse-or-tone dialling capability
KX-TS600FXW
This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your service provider.
Please read these Operating Instructions before using the unit and save for future reference.
Useful InformationBasic OperationPreparation Advanced Operation
TS600FX.book Page 2 Wednesday, April 5, 2006 10:27 AM
Before Initial Use
Thank you for purchasing your new Panasonic integrated telephone.
For your future reference
Serial No. Date of purchase
(found on the bottom of the unit)
Name and address of dealer
Note:
• In the event of problems, you should contact your equipment supplier in the first instance.
Declaration of Conformity:
• Panasonic Communication Co., Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting:
http://www.doc.panasonic.de
Contact: Panasonic Services Europe a Division of Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany
Accessories (included)
Handset (p. 6)
one
Handset Cord (p. 6)
one
2
Telephone Line
Cord (p. 6)
one
TS600FX.book Page 3 Wednesday, April 5, 2006 10:27 AM
Contents
Preparation
Advanced Operation
Location of Controls. . . . . . . . . . 4
Display . . . . . . . . . . . . . . . . . . . . . 5
Settings . . . . . . . . . . . . . . . . . . . . 6
Installing the Batteries . . . . . . . . 6
Connecting the Handset/
Telephone Line Cord . . . . . . . . 6
Connecting a Communication
Device . . . . . . . . . . . . . . . . . . . 7
Programming Summary . . . . . . . 8
Time and Date . . . . . . . . . . . . . . 9
Display Language. . . . . . . . . . . 11
Dialling Mode . . . . . . . . . . . . . . 12
LCD Contrast . . . . . . . . . . . . . . 13
Ringer Volume . . . . . . . . . . . . . 13
Time Adjustment
(Caller ID subscribers only) . . 14
Basic Operation
Making Calls . . . . . . . . . . . . . . . 15
Answering Calls . . . . . . . . . . . . 17
Caller ID Service . . . . . . . . . . . . 18
Private Name Display . . . . . . . . 18
Using the Caller List . . . . . . . . . 19
Viewing the Caller List . . . . . . . 19
Calling Back from the Caller
List . . . . . . . . . . . . . . . . . . . . . 20
Editing the Caller’s Phone
Number. . . . . . . . . . . . . . . . . . 21
Storing Caller List Information in
the Phonebook . . . . . . . . . . . . 22
Storing Caller List Information in
the Direct Dial Memory . . . . . . 23
Erasing Caller List
Information . . . . . . . . . . . . . . . 25
Phonebook. . . . . . . . . . . . . . . . . 26
Storing Names and Phone
Numbers in Phonebook . . . . . 26
Dialling from the Phonebook. . . 28
Chain Dial . . . . . . . . . . . . . . . . . 29
Editing . . . . . . . . . . . . . . . . . . . . 30
Erasing . . . . . . . . . . . . . . . . . . . 31
Direct Dial (M1, M2, M3) . . . . . . 32
Storing Names and Phone
Numbers in Memory . . . . . . . . 32
Dialling . . . . . . . . . . . . . . . . . . . 34
Special Features . . . . . . . . . . . . 35
Temporary Tone Dialling
(For Rotary or Pulse Service
Users) . . . . . . . . . . . . . . . . . . . 35
How to Use the PAUSE Button
(For PBX Line/Long Distance
Calls). . . . . . . . . . . . . . . . . . . . 35
For Call Waiting Service
Users . . . . . . . . . . . . . . . . . . . 35
Muting Your Conversation . . . . 36
Setting Hold Music
to ON/OFF . . . . . . . . . . . . . . . 36
FLASH Button . . . . . . . . . . . . . . 37
Setting the Password . . . . . . . . 38
Dial Lock . . . . . . . . . . . . . . . . . . 39
Call Restriction . . . . . . . . . . . . . 40
Useful Information
Optional Headset. . . . . . . . . . . . 42
Wall Mounting . . . . . . . . . . . . . . 43
Battery Replacement . . . . . . . . 44
Troubleshooting . . . . . . . . . . . . 45
Safety Instructions . . . . . . . . . . 47
Specifications . . . . . . Back Cover
Useful InformationBasic OperationPreparation Advanced Operation
3
TS600FX.book Page 4 Wednesday, April 5, 2006 10:27 AM
Location of Controls
[FUNCTION/EDIT] Button (p. 8, 21)
[EXIT] Button (p. 8, 19)
[ERASE] Button (p. 21, 25, 31)
[DIAL LOCK] Button (p. 39)
Direct Dial Button (p. 23, 32)
Headset Jack (p. 42)
[TONE] Button (p. 35)
MIC (Microphone) (p. 15, 17)
[MUTE] Button (p. 36)
[SP-PHONE (Speakerphone)/ HEADSET] Button
and Indicator (p. 15, 17, 42)
Display (p. 5)
RINGER Indicator (p. 17, 18)
RINGER Selector (p. 13)
Navigator Key ([
4], [3], [2], [1], [OK])
(p. 8, 19, 28)
[HOLD] Button (p. 17)
[PAUSE] Button (p. 35)
[FLASH] Button (p. 35, 37)
[REDIAL] Button (p. 16)
How to use the Navigator key and [OK] button
This key has five active areas that are indicated by arrows and [OK].
• Pressing the up and down arrows allows you to enter the Caller List and scroll through the function menu.
OK
Throughout these Operating Instructions, the navigator key is indicated by the arrows [4], [3], [2] or [1] and [OK].
• Pressing the right and left arrows allows you to enter the Phonebook and move the cursor when entering items. The right arrow is also used to select the desired item.
•The [OK] button is used to select and confirm desired item.
4
TS600FX.book Page 5 Wednesday, April 5, 2006 10:27 AM
Display
(This display shows all of the possible configurations.)
Preparation
0:00 31.12
10 missed calls
0:00 31.12
12:34 21.5
01-06-35
1114447777 11:50 24.11
(Example: Nov. 24, 11:50 AM).
:The dial lock mode is set. To cancel the mode, see page 39.
:The unit enters in the Phonebook.
:The unit plays music during the hold for a caller.
:[MUTE] was pressed during a conversation (p. 36).
:[REDIAL] was pressed while the handset is on the cradle and
SP-PHONE/HEADSET indicator is off (p. 16).
While the unit is not in use, the display shows the current time and date, and the number of missed calls.
If the display continuously shows “0:00
31.12” or “12:00AM 31.12” and “ ” flashes, the clock needs adjustment (p. 9, 10).
During a conversation, the display shows the length of the call (Example: 1 hour, 6 minutes and 35 seconds).
This is a display from the Caller List. The display shows: —the caller’s number, —the time and date of the call
:This display flashes, when the battery power is low. To replace the
batteries, see page 44.
P
:[PAUSE] was pressed while dialling or storing phone numbers.
F
:[FLASH] was pressed while storing phone numbers.
5
TS600FX.book Page 6 Wednesday, April 5, 2006 10:27 AM
Settings
Installing the Batteries
Press down in the direction of the arrow
1
and open the cover (1).
Install the batteries in the proper order
2
as shown (2), matching the correct polarity.
Close the battery cover.
3
• Batteries are not included with the unit.
• Install three high quality “AA” size Alkaline (LR6) or Manganese (R6, UM-3) batteries. We recommend to use Panasonic batteries. Battery life : —about six months when using Alkaline batteries.
—about three months when using Manganese batteries.
Battery life may depend on usage conditions and ambient temperature.
• Make sure batteries were inserted properly inphase to ensure the functionality of this unit.
• Please refer to page 44 for battery replacement and precautions.
THE UNIT MAY NOT WORK PROPERLY WITHOUT BATTERIES.
Connecting the Handset/Telephone Line Cord
After line connection, lift the handset to check for a dial tone.
LINE
Handset
Telephone Line Cord
To Single-Line Telephone Jack
• Use only a Panasonic Handset for the KX-TS600FXW and KX-TS600FXB.
• Use only the telephone line cord included with the unit.
• If your unit is connected to a PBX which does not support Caller ID services, you cannot access those services.
Handset Cord
6
TS600FX.book Page 7 Wednesday, April 5, 2006 10:27 AM
If you subscribe to a DSL service
• Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:
jNoise is heard during conversations. jCaller ID feature
(p. 18) does not function properly.
Noise filter (For DSL users)
To Single-Line
Telephone Line Cord
Telephone Jack
Connecting a Communication Device
Preparation
If you want to connect a communication device (computer, modem, fax, answering machine, etc.) to the telephone line, you can connect it through this unit using the DATA jack.
After connecting the handset and telephone line cord (p. 6), connect the communication device telephone line cord to the DATA jack.
Computer Modem Fax Answering Machine
• Make sure the communication device is not in use before using this unit (making calls, storing phone numbers in memory etc.) or the communication device may not operate properly.
DATA
7
TS600FX.book Page 8 Wednesday, April 5, 2006 10:27 AM
Settings
Programming Summary
You can program the following functions. The display shows the programming instructions. See the corresponding pages for function details.
Make sure that the handset is on the cradle and the SP-PHONE/ HEADSET indicator light is off.
Press [FUNCTION/EDIT].
<Function menu>*
Save phonebook ? To store names and phone numbers in
. . . .
Save M1,M2,M3 ? memory (p. 26, 32). Program ?
Set clock ? . . . . . . . . . To set the time and date (p. 9).
Change language? . . . . To select the display language (p. 11).
––––––––––––––––
Scroll to “Program ?” by pressing [4] or [3], and press [OK] (Yes key).
<Function menu>*
Change password? . . . . To change the password for the dial lock
and call restriction (p. 38).
Call restrict ? . . . . . To set the call restriction (p. 40).
Set flash time ? . . . . To select the flash time (p. 37).
Set dial mode ? . . . . . To select the dialling mode (p. 12).
LCD contrast ? . . . . . . To select the LCD contrast (p. 13).
Set hold music ? . . . . To set the music during hold (p. 36).
Time adjustment? . . . . To set the auto time adjustment (p. 14).
––––––––––––––––
During programming
* To select a desired function item, scroll through the items by pressing [
or [
3]. Then press [OK] to go to the next step.
The right arrow [
•“––––––––––––––––” indicates the end of the function menu.
• You can exit the programming mode any time by pressing [EXIT].
• If you do not press any valid buttons for 60 seconds, the unit will exit the programming mode.
1] is also used to select or confirm the desired item.
8
4]
TS600FX.book Page 9 Wednesday, April 5, 2006 10:27 AM
Time and Date
You can select 24-hour clock or AM/PM by programming.
Make sure that the handset is on the cradle and the SP-PHONE/ HEADSET indicator light is off.
Press [FUNCTION/EDIT].
1
Scroll to “Set clock ?” by pressing [4]
2
or [
3].
Set clock ?
34
[OK]=Yes
Preparation
Press [OK] (Yes key).
3
Press [OK] (Next key).
4
Enter the current year. (Example: To set 2006, enter “06”.)
• You can set the year 2000 to 2099.
Press [OK] (Next key).
5
Enter the current time (hour and minute)
6
using a 4-digit number. (Example: To set 9:30, enter “0930”.)
• For 24-hour clock: Enter numbers between 0000 and 2359.
• For AM/PM setting: Enter numbers between 0100 and 1259.
Press [OK] (Next key).
7
• If numbers between 0000 and 0059, or 1300 and 2359 are entered, the time will automatically be set using the 24-hour clock. Skip steps 8 and 9, and go to step 10.
00:00 31.12 2006
4
[OK]=Next
Enter year 2006
34
[OK]=Next
Enter time 00:00
34
[OK]=Next
Enter time 09:30
34
[OK]=Next
#=AM/PM/24H 24H
34
[OK]=Next
(Continued )
9
TS600FX.book Page 10 Wednesday, April 5, 2006 10:27 AM
Settings
Press [#] to select “AM”, “PM” or 24-hour
8
clock. (Example: You select “PM”.)
Display
AM
PM
24H
• Each time you press [#], the selection will change on the display.
Press [OK] (Next key).
9
Enter the current day and month using
10
a 4-digit number. (Example: To set Dec. 27, enter “2712”.)
Press [OK] (Save key).
11
• A long beep sounds.
• The clock starts working.
• The display will return to step 2. To exit the programming mode, press [EXIT] or wait for 60 seconds.
• You can go back to the previous screen by pressing [ and date (steps 4 through 10).
• If 3 beeps sound when entering the time and date, the time and date entered are not correct. Enter the correct time and date.
Option
AM
PM
24-Hour clock
#=AM/PM/24H PM
34
[OK]=Next
Enter day.month
31.12
3
[OK]=Save
Enter day.month
27.12
3
[OK]=Save
3], when setting the time
If the batteries installed in the unit expired, the time and date will be shown as “0:00 31.12” or “12:00AM 31.12”, and “ ” will flash. Replace the batteries then adjust the time and date.
For Caller ID service users (p. 18)
If a time display service is available with the Caller ID service:
• The Caller ID information will re-set the clock after the ring if the adjusted time
and/or date is incorrect and when the Time Adjustment is set to ON (p. 14). If the time and date has not previously been set, the Caller ID information will not adjust the clock.
10
TS600FX.book Page 11 Wednesday, April 5, 2006 10:27 AM
Display Language
You can select “English”, “Czech”, “Polish”, “Hungarian” or “Romanian” as the display language. Your phone default setting is “English”.
Make sure that the handset is on the cradle and the SP-PHONE/ HEADSET indicator light is off.
Press [FUNCTION/EDIT].
1
Scroll to “Change language?” by
2
pressing [
Press [OK] (Yes key).
3
4] or [3].
Change language?
34
[OK]=Yes
Preparation
Select “English”, “Cestina”,
4
Polski”, “Magyar” or “Româna” by pressing [
Press [OK] (Save key).
5
• A long beep sounds.
• The display will return to step 2. To exit the programming mode, press [EXIT] or wait for 60 seconds.
• You can exit the programming mode any time by pressing [EXIT].
4] or [3].
Language :English
34
[OK]=Save
11
TS600FX.book Page 12 Wednesday, April 5, 2006 10:27 AM
Settings
Dialling Mode
You can select the dialling mode by programming. If you have touch tone service, set to Tone. If rotary or pulse service is used, set to Pulse. Your phone default setting is Tone.
Make sure that the handset is on the cradle and the SP-PHONE/ HEADSET indicator light is off.
Press [FUNCTION/EDIT].
1
Scroll to “Program ?” by pressing [4] or
2
[
3]. Press [OK] (Yes key).
Scroll to “Set dial mode ?” by
3
pressing [
Press [OK] (Yes key).
4
4] or [3].
Set dial mode ?
34
[OK]=Yes
Select “Pulse” or “Tone” by pressing
5
[
4] or [3].
Press [OK] (Save key).
6
• A long beep sounds.
• The display will return to step 3. To exit the programming mode, press [EXIT] or wait for 60 seconds.
• You can exit the programming mode any time by pressing [EXIT].
Dial mode :Tone
34
[OK]=Save
12
TS600FX.book Page 13 Wednesday, April 5, 2006 10:27 AM
LCD Contrast
You can select the LCD contrast level from 1 to 4 by programming. Your phone default setting is 2.
Make sure that the handset is on the cradle and the SP-PHONE/ HEADSET indicator light is off.
Press [FUNCTION/EDIT].
1
Scroll to “Program ?” by pressing [4] or
2
[
3]. Press [OK] (Yes key).
Scroll to “LCD contrast ?” by pressing
3
[
4] or [3].
• The current setting is displayed.
Press [OK] (Yes key).
4
LCD contrast ?
34
[OK]=Yes
Preparation
Select the desired contrast by pressing
5
[
4] or [3].
• Each time you press [4] or [3], the LCD
contrast will change.
Press [OK] (Save key).
6
• A long beep sounds.
• The display will return to step 3. To exit the programming mode, press [EXIT] or wait for 60 seconds.
• You can exit the programming mode any time by pressing [EXIT].
LCD contrast Low
????
34
[OK]=Save
High
Ringer Volume
You can select the ringer volume to HIGH, LOW or OFF. Your phone default setting is HIGH.
RINGER Selector:
Set to HIGH, LOW or OFF.
When set to OFF, the unit will not ring.
OFF HIGH
LOW
RINGER
13
TS600FX.book Page 14 Wednesday, April 5, 2006 10:27 AM
Settings
Time Adjustment (Caller ID subscribers only)
Using this feature, the unit’s date and time setting will be automatically adjusted when caller information is received. You can set the auto time adjustment by programming. Your phone default setting is OFF.
Make sure that the handset is on the cradle and the SP-PHONE/ HEADSET indicator light is off.
Press [FUNCTION/EDIT].
1
Scroll to “Program ?” by pressing [4]
2
or [
3]. Press [OK] (Yes key).
Scroll to “Time adjustment?” by
3
pressing [
4] or [3].
Time adjustment?
34
[OK]=Yes
Press [OK] (Yes key).
4
Select “On” or “Off” by pressing [4]
5
or [
3].
(Example: “On” is selected.)
Press [OK] (Save key).
6
• A long beep sounds.
• The display will return to step 3. To exit the programming mode, press [EXIT] or wait for 60 seconds.
• To use this feature, set the date and time in advance (p. 9).
Time adjustment :On
34
[OK]=Save
14
TS600FX.book Page 15 Wednesday, April 5, 2006 10:27 AM
Making Calls
You can make a call by simply lifting the handset. To hang up, place the handset on the cradle.
Using the speakerphone
Press [SP-PHONE/HEADSET],
1
then dial a phone number.
OR
Dial a phone number, then press
[SP-PHONE/HEADSET].
• The indicator lights.
• The dialled number is displayed.
• After a few seconds, the display will show the length of the call.
• If you have misdialled, hang up and start again from step 1.
When the other party answers, talk into
2
the MIC (microphone).
12:34 21.5
1234567890
12:34 21.5
00-00-02
Basic Operation
To hang up, press [SP-PHONE/HEADSET].
3
• The indicator light goes out.
During speakerphone operation
For best performance, please note the following:
• Talk alternately with the other party in a quiet room.
• If the other party has difficulty hearing you, press VOLUME [4] to decrease
the speaker volume.
• You can switch to the handset by lifting it up. To switch back to the speakerphone, press [SP-PHONE/HEADSET].
15
Loading...
+ 33 hidden pages