Panasonic KX-TG2583ALS, KX-TG2583NZS User Manual

2.4GHz Digital Cordless Answering System

Model No. KX-TG2583ALB

KX-TG2583ALS

KX-TG2583NZS

Operating Instructions

PLEASE READ BEFORE USE AND SAVE.

Charge the battery for about 6 hours before initial use.

Preparation Cordless Telephone Answering System Useful Information

Caller ID Compatible

KX-TG2583ALB

Before Initial Use

Thank you for purchasing your new Panasonic cordless telephone.

For your future reference

Serial No. Date of purchase

(found on the bottom of the unit)

Name and address of dealer

Attach or keep original receipt to assist with any repair under warranty.

Accessories (included)

AC Adaptor (p. 10)

Wall Mounting Adaptor (p. 68)

one

Belt Clip (p. 70)

one

For Australia

When you subscribe to Caller ID services from your telephone operator, this telephone will display the caller’s phone number. When available from your telephone operator, this telephone will also display the number of the second call or call waiting.

For New Zealand

Caller ID, where available, is telephone company service. After subscribing to Caller ID, this phone will display a caller’s phone number.

Telephone Line Cord

(p. 10)

For Australia

For New Zealand

oneone

For Australia only

Telephone Plug (p. 10)

one

For Best Performance

Battery Charge

A rechargeable Ni-Cd battery powers the handset. Charge the battery for about 6 hours before initial use (p. 11).

•Clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the

battery may not charge properly.

Base Unit Location/Noise

Calls are transmitted between the base unit and the handset using wireless radio waves. For maximum distance and noise-free

operation, the recommended base unit location is:

Note:

While using the handset:

•If you are near a microwave oven which is being used, noise may be heard from the receiver. Move away from the microwave oven and closer to the base unit.

•If more than one cordless phone is being used and your handset is near another cordless phone’s base unit, noise may be heard. Move away from the other cordless phone’s base unit and closer to your base unit.

Away from electrical appliances such as a TV, personal computer, cellular phone, charging units or another cordless phone.

In a HIGH and CENTRAL location with no obstructions such as walls.

Raise the antennas.

The battery is beneath this cover.

Preparation

Location of Controls...................................................................... 6

Displays .......................................................................................... 9

Settings...........................................................................................10

Connections..................................................................................10

Battery Charge .............................................................................11

Selecting the Line Mode...............................................................13

Programmable Functions .............................................................14

Setting the Auto Talk Feature.......................................................15

Selecting the Ringer Volume........................................................16

Preparing the Answering System ................................................17

Greeting Message ........................................................................17

Programming Summary for the Answering System .....................19

Day and Time Adjustment ............................................................20

Selecting the Caller’s Recording Time .........................................22

Selecting the Number of Rings.....................................................23

Cordless Telephone

Making Calls...................................................................................24

With the Handset ..........................................................................24

With the Base Unit (Digital Duplex Speakerphone) .....................26

Simultaneous Keypad Dialling......................................................28

Answering Calls.............................................................................29

With the Handset ..........................................................................29

With the Base Unit (Digital Duplex Speakerphone) .....................29

Caller ID Service ............................................................................30

Using the Caller List......................................................................32

Viewing the Caller List..................................................................32

Calling Back from the Caller List ..................................................34

Editing the Caller’s Phone Number ..............................................34

Storing Caller List Information in the Directory.............................37

Erasing Caller List Information .....................................................38

One-Touch Dialer...........................................................................40

Storing a Phone Number in the DIRECT Button ..........................40

Dialling the Stored Number in the DIRECT Button ......................41

Using the Directory........................................................................42

Storing Names and Numbers in the Directory .............................42

Selecting Characters to Enter Names .........................................44

Finding Items in the Directory ......................................................46

Dialling from the Directory ...........................................................48

Editing an Item in the Directory ...................................................49

Erasing an Item from the Directory .............................................50

Preparation Cordless Telephone Answering System Useful Information

Intercom..........................................................................................51

Transferring a Call Using the Intercom.........................................52

Special Features ............................................................................53

How to Use the PAUSE Button

(For Analog PBX Line/Long Distance Service Users) ..............53

Automatic Security Code Setting..................................................54

Call Waiting and Caller ID Compatible (For Australia only) .........54

RECALL Button ............................................................................54

Answering System

Automatic Answering Operation..................................................56

Setting the Unit to Answer Calls...................................................56

Listening to Messages ..................................................................57

From the Handset.........................................................................58

Erasing Messages .........................................................................59

Remote Operation from a Touch Tone Phone ............................60

Setting the Remote Code .............................................................61

Voice Menu...................................................................................62

Direct Remote Operation..............................................................64

Remote Operation with the Handset............................................66

Useful Information

Wall Mounting ................................................................................68

Using the Belt Clip.........................................................................70

Using an Optional Headset...........................................................70

Battery Replacement .....................................................................71

If the Following Appear... .............................................................72

Before Requesting Help ................................................................74

Adding Another Phone..................................................................80

Safety Instructions ........................................................................81

Important Information (For Australia only) .................................85

Location of Controls

Base unit

IN USE/CHARGE Indicator (p. 11)

Charge Contacts (p. 12)

(RECALL) Button

(p. 54, 55)

(REDIAL/PAUSE) Button

(p. 27, 53)

Display (p. 9, 73)

(HOLD/RINGER) Button (p. 16, 27)

(LOCATOR/INTERCOM)

Button (p. 51)

MIC (Microphone) (p. 17, 26, 29, 51)

Antennas (p. 3, 10)

(DIGITAL!SP-PHONE)

(Speakerphone) Button and Indicator (p. 26, 29)

ERASE/CLEAR

Preparation

(ERASE/CLEAR)

Button (p. 18, 38, 50, 59)

(GREETING/EDIT) Button

(p. 17, 36)

(ANSWER!ON) Button

(p. 56)

Navigator Key ( , , , ) (

p. 18, 27, 32, 47, 57

)

(NEW!MESSAGE) Button

(p. 57)

(STOP/EXIT) Button

(p. 17, 32, 47, 56, 57)

CALLER ID Indicator (p. 29, 31)

Cradle Lock Switch (p. 68)

ANSWER ON Indicator (p. 56, 57, 59)

ERASE/CLEAR

Back Side

Location of Controls

Handset

TALK

REDIAL

PAUSEPAUSE

PLPLAYBABACK

STOP

ANS

S ON

ANS

OFF

CHCH

FUNCTION EXITFUNCTION EXIT

INTINTE

ERCOM C

CLEAR

KIP

REP

PEAT

ALL

L MSG

NEW

W MSG

BACKBACK

FWD

EDITEDIT

DIRECTDIRECT

LOUD LOUD SEAR

RCH

(INTERCOM/CLEAR)

Button (p. 38, 44, 50, 51)

(RECALL/PLAYBACK)

Button (p. 54, 55, 66)

Headset Jack (p. 70)

(TALK) Button (p. 24, 29)

Charge Contact (p. 12)

Navigator Key ( , ,

BACK

FWD/EDIT

)

(

p. 14, 19, 25, 32, 42

)

Display (p. 9, 72)

(FUNCTION/EXIT/CH)

(Channel) Button (p. 14, 19, 24, 32, 42, 46)

Charge Contact (p. 12)

(REDIAL/PAUSE) Button

(p. 25, 53)

(DIRECT) Button

(p. 40, 41)

Antenna

RECALL

Displays

Preparation

Base unit

#The day and time and the number of

incoming messages are displayed while the unit is not in use (Standby mode). The display shows the dialled number, call status, programming options and directory items etc. If you subscribe to a Caller ID service, caller information will be displayed (p. 30). The number of new calls will also be displayed.

Handset

#The display shows the dialled number,

call status, programming options and directory items etc. If you subscribe to a Caller ID service, caller information will be displayed (p. 30). The number of new calls will also be displayed.

$The directory icon displays when viewing the directory items (p. 47). %The clock icon ﬂashes with the day and time if the clock needs

adjusting (p. 20).

$The directory icon displays when storing or viewing the directory items

(p. 42, 46).

%The battery icon indicates the battery strength (p. 11).

Standby mode:

While the handset is off the base unit, the display will disappear (go blank) after you ﬁnish using the handset (making/answering a call, viewing the Caller List or directory list etc.) to conserve the battery life. However, the handset is still able to receive calls. While the handset is on the base unit, the battery icon and the number of new Caller ID calls are displayed in the standby mode (p. 31).

0 new call

SUN 12:00AM

0 message

Settings

Connections

•

USE ONLY WITH Panasonic AC ADAPTOR PQLV10AL.

•The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

•To connect a standard telephone on the same line, see page 80.

•If your unit is connected to a PBX which does not support Caller ID services, you

cannot access those services.

•KX-TG2583ALB/KX-TG2583ALS and KX-TG2583NZS are not designed to be used with rotary (pulse dialling) services.

•KX-TG2583NZS will not answer incoming calls on your FaxAbility number.

Hooks

Raise the antennas.

Fasten the cords to prevent them from disconnecting.

To Power Outlet (AC 230 V–240 V, 50 Hz)

AC Adaptor

Telephone Line Cord

Telephone Plug

For New Zealand

To Single-Line Telephone Jack

Telephone Line Cord

To Socket

For Australia

Preparation

Needs to be recharged.

Battery Charge

Place the handset on the base unit and charge for about 6 hours before initial use.

•The IN USE/CHARGE indicator lights and a beep sounds.

Battery strength

You can check the battery strength on the handset display while the handset is on the base unit, while it is in use (making/answering a call etc.), or after viewing the Caller List or directory items, programming etc. The battery strength will remain for a few seconds after using the handset, then the display will return to the standby mode (p. 9).

The battery strength is as shown in the chart below.

Display prompt Battery strength

Fully charged

Medium

Low

(ﬂashing)

Recharge

Recharge the battery when: —“Recharge battery” is displayed on

the handset,

—“ ” ﬂashes on the display, or —the handset beeps intermittently while it is in use.

•If you DO NOT recharge the handset battery for more than 15 minutes, the display will keep indicating “Recharge battery” and/or “” will continue to ﬂash.

•To fully recharge the battery, the handset should be left on the base unit for 6 hours.

Recharge battery

IN USE/CHARGE Indicator

Settings

Up to 3.5 hours

Up to 11 days

Battery information

After your Panasonic battery is fully charged (p. 11):

Operation Approx. battery life

While in use

(TALK)

Up to 4.5 hours

While not in use (Standby)

near the base unit*

away from the base unit

*Within about 3 m

•Battery life may be shortened depending on usage conditions, such as viewing the Caller ID Caller List or directory list, and ambient temperature.

•Clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.

•If the battery is fully charged, you do not have to place the handset on the base unit until “Recharge battery” is displayed and/or “” ﬂashes. This will maximize the battery life.

•The battery cannot be overcharged.

Preparation

Selecting the Line Mode

If the line is connected to a low voltage system such as a PBX, set to “B”. Otherwise the Call Waiting Caller ID Feature may not be used (p. 54). Your phone comes from the factory set to “A”.

Use the handset near the base unit. Make sure the unit is in the standby mode initially.

Press (FUNCTION/EXIT/CH).

Press (Å) or (Ä) repeatedly until the arrow points to “Program”.

Press FWD/EDIT (É) (Yes key).

Press (Å) or (Ä) repeatedly until the arrow points to “Set line mode”.

Press FWD/EDIT (É) (Yes key).

Press (Å) or (Ä) to select “B” or “A”.

Press FWD/EDIT (É) (Save key).

•A beep sounds.

•To return to the standby mode, press

(FUNCTION/EXIT/CH).

•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).

•If the handset has lost communication with the base unit, 3 beeps sound and “No

link to base. Place on cradle and try again.” is displayed.

Set line mode Talk switching

GF H

=Yes

Line mode

GF H

=Save

Line mode

Save directory Ringer volume

GF H

=Yes

Program

GF H

=Yes

Save DIRECT# Set recall time

GF H

=Yes

Line mode

GF H

=Save

Programmable Functions

Save DIRECT#

Set recall time

Set line mode

Talk switching

TAD program

You can program the following function items using the handset near the base unit. The display shows the programming instructions. See the

corresponding pages for function details.

Make sure the unit is in the standby mode initially.

During programming:

*To select a desired function item, press (Å) or (Ä) repeatedly until the

arrow points to the item. Then press FWD/EDIT (É) to go to the next step.

•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).

•If you do not press any buttons for 60 seconds, the unit will return to the standby

mode.

•If the handset has lost communication with the base unit, 3 beeps sound and “No link to base. Place on cradle and try again.” is displayed.

Press (FUNCTION/EXIT/CH).

<Function menu>*

To store an item in the directory (p. 42).

To select the ringer volume (p. 16).

Press FWD/EDIT (É).

To store a phone number in the DIRECT button (p. 40).

To select the recall time (p. 55).

To select the line mode (p. 13).

To set the auto talk feature (p. 15).

To program answering system functions (p. 19).

Save directory

Ringer volume

Program

<Function menu>*

Preparation

Setting the Auto Talk Feature

The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing (TALK). If you want to use this feature, turn the feature ON by programming. Your phone comes from the factory set to OFF.

Make sure the unit is in the standby mode initially.

Press (FUNCTION/EXIT/CH).

Press (Å) or (Ä) repeatedly until the arrow points to “Program”.

Press FWD/EDIT (É) (Yes key).

Press (Å) or (Ä) repeatedly until the arrow points to “Talk switching”.

Press FWD/EDIT (É) (Yes key).

Press (Å) or (Ä) to select “On” or “Off”.

Press FWD/EDIT (É) (Save key).

•A beep sounds.

•To return to the standby mode, press

(FUNCTION/EXIT/CH).

•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).

•In order to view Caller ID information before answering a call, leave the Auto Talk

feature OFF.

Auto talk

:On

Program

GF H

=Yes

Set line mode

Talk switching

GF H

=Yes

Auto talk

:Off

GF H

=Save

Auto talk

:On

GF H

=Save

With the base unit

Make sure the unit is in the standby mode initially. (You can also

select the ringer volume while a call is being received.)

•To select HIGH or LOW, press

(HOLD/RINGER). Each time you press the

button, the selected ringer volume will be displayed and ring.

•To turn the ringer OFF, press and hold

(HOLD/RINGER) until 2 beeps sound.

“Ringer off” will be displayed.

•To turn the ringer ON, press

(HOLD/RINGER).

The ringer will sound at the HIGH level.

Selecting the Ringer Volume

You can set the handset and base unit ringer volumes to HIGH, LOW or OFF. If set to OFF, the handset/base unit will not ring. Your phone comes from the factory set to HIGH.

With the handset

Make sure the unit is in the standby mode initially.

Press (FUNCTION/EXIT/CH).

Press (Å) or (Ä) repeatedly until the arrow points to “Ringer volume”, and press FWD/EDIT (É) (Yes key).

Press (Å) or (Ä) to select the desired volume.

•The selected volume is displayed and rings.

•To turn the ringer OFF, press and hold (Å) until 2 beeps sound.

To turn the ringer ON, press (Ä) or (Å) in step 3.

•The ringer will sound at the LOW level.

•You can also select the ringer volume while a call is being received.

Press (Å) or (Ä) while the unit is ringing.

•When set to OFF, “Ringer off” will ﬂash for about 45 seconds before the handset returns to the standby mode.

•When you replace the battery, the selected ringer volume setting will return to the factory default (HIGH). Reprogram if necessary.

Save directory

Ringer volume

GF H

=Yes

Low ❚❚❚❚❚❚ High

Ringer Low ❚❚❚❚❚❚ High

HIGH

LOW

Ringer off

OFF

Ringer

Low ❚❚❚❚❚❚ High

HIGH

Low ❚❚❚❚❚❚ High

LOW

Ringer off

OFF

Programmable Functions

Preparation

Preparing the Answering System

Greeting Message

You can record a personal greeting message of up to 2 minutes. If a greeting message is not recorded, one of two pre-recorded greetings will be played when a call is received (p. 18).

All messages (greeting, incoming, etc.) are stored in digital memory (p. 18). The total recording time is about 15 minutes. We recommend you record a brief greeting message (see sample on next page) in order to leave more time for recording new messages.

To record a greeting message

Press and hold (GREETING/EDIT) until a long beep is heard.

Talk clearly, about 8 inches (20 cm) away from the MIC (microphone).

•The base unit display shows the elapsed recording time.

•If you record for over 2 minutes, the unit will automatically stop recording.

When ﬁnished, press (STOP/EXIT).

•To check the recorded greeting, press (GREETING/EDIT) brieﬂy.

•To change the message, start again from step 1.

Greeting record

00-00

Greeting record

00-12

Greeting check

00-12

(STOP/EXIT)

(GREETING/EDIT)

(ERASE/CLEAR)

To increase the volume, press . To decrease, press .

MIC

Preparing the Answering System

To erase the recorded greeting message

Press (GREETING/EDIT) brieﬂy \ press (ERASE/CLEAR) while the message is being played.

•The unit will answer a call with a pre-recorded greeting.

Pre-recorded greeting message

If you do not record a greeting message (p. 17), one of two messages will be played when a call is received, depending on the caller’s recording time (p. 22).

To check the pre-recorded greeting, press (GREETING/EDIT) brieﬂy.

•A pre-recorded greeting will be played as follows:

■ When the recording time is set to “1 minute” or “3 minutes”:

“Hello, we are not available now. Please leave your name and phone number after the beep. We will return your call.”

■ When the recording time is set to “Greeting only”:

“Hello, we are not available now. Please call again. Thank you for your call.”

Flash Memory Message Backup

Messages are stored on a “ﬂash memory” IC chip and will not be affected by power failures. All messages are saved until you erase them.

Greeting message sample

“Hello, this is (your name and/or number). Sorry I cannot take your call. Please leave a message after the beep. Thank you.”

To adjust the speaker volume:

9 levels (0–8) are available while using the answering system. To increase, press(Ä). To decrease, press (Å).

Loud

Low ❚❚❚❚❚❚❚❚High

Ex. Level 8

Preparation

The base unit display shows programming options. Enter a required command on the display using the handset dialling buttons. See the page numbers for details.

Programming Summary for the Answering System

You can program the following functions using the handset near the base unit. Make sure the unit is in the standby mode initially.

•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).

•If you do not press any buttons for 60 seconds, the unit will return to the standby

mode.

•If 6 beeps sound on the base unit during programming, a wrong key was pressed. Enter the correct number.

•If the handset has lost communication with the base unit, 3 beeps sound and “No link to base. Place on cradle and try again.” is displayed on the

handset.

0=Day and time 1=Remote code 2=Number of ring

5=Recording time

Press (FUNCTION/EXIT/CH).

Press FWD/EDIT (É) (Save key).

Press (Å) or (Ä) to select “TAD program”, and press FWD/EDIT (É) (Yes key).

•“Answering system setting. See base unit.” is displayed on the handset.

Adjusts the day and time (p. 20). Sets the remote code (p. 61). Selects the number of rings (p. 23).

Selects the caller’s recording time (p. 22).

*The display will change every 3 seconds.

Press (Å) or (Ä) to select “Program”, and press FWD/EDIT (É) (Yes key).

Preparing the Answering System

Press (FUNCTION/EXIT/CH).

Press (Å) or (Ä) repeatedly until the arrow points to “Program”.

Press FWD/EDIT (É) (Yes key).

Press (Å) or (Ä) repeatedly until the arrow points to “TAD program”.

Press FWD/EDIT (É) (Yes key).

•The base unit display shows programming options.

Press (0).

•“Set time” is announced. If previously adjusted, the day/time will be heard.

Enter the time (hour and minute) using a 4-digit number. (Ex. To set 9:30, enter “0930”.)

Press (*) to select “AM” or “PM”. Press (#) repeatedly to set the day.

Day and Time Adjustment

Voice Time/Day Stamp: During playback, a synthesized voice will

announce the day and time that each message was recorded.

SUN 12:00 AM

=AM/PM #=Day

Base unit display

Program

GF H

=Yes

Save DIRECT# Set recall time

GF H

=Yes

TAD program

GF H

=Yes

Answering system setting. See base unit.

Save directory Ringer volume

GF H

=Yes

Preparation

Press FWD/EDIT (É) (Save key).

•The unit announces the day/time. The clock starts working.

•If 6 beeps sound, the setting is not correct. Start again from step 5.

•To return to the standby mode, press (FUNCTION/EXIT/CH).

•In step 7, you cannot enter numbers greater than 12. Do not use 24 hour clock

time. (To set 13:00 hours, enter “0100”, and select “PM” by pressing (*).)

If a power failure occurs, the adjusted day/time will be erased. Readjust the day/time.

For Caller ID service users (p. 30)

•The Caller ID information will re-set the clock after the ﬁrst ring if the adjusted time is incorrect. However, the day will not be re-set. Set the day following the procedures on pages 20 and 21.

•If the time has not previously been set, the Caller ID information will not adjust the clock.

•The Caller ID information will automatically adjust the clock for daylight saving time.

Selecting the Caller’s Recording Time

You can select “1 minute”, “3 minutes” or “Greeting only” for the caller’s recording time. Your phone comes from the factory set to “3 minutes”.

Press (FUNCTION/EXIT/CH).

Press (Å) or (Ä) repeatedly until the arrow points to “Program”.

Press FWD/EDIT (É) (Yes key).

Press (Å) or (Ä) repeatedly until the arrow points to “TAD program”.

Press FWD/EDIT (É) (Yes key).

•The base unit display shows programming options.

Press (5).

•The current setting is displayed on the base unit.

Press (1), (2) or (3) to select the recording time.

1: 1 minute 2: 3 minutes 3: Greeting only

Press FWD/EDIT (É) (Save key).

•A beep sounds.

•To return to the standby mode, press (FUNCTION/EXIT/CH).

If you select “Greeting only”, the unit will answer a call with the greeting message, and then hang up. The unit will not record any incoming messages. The base unit display will show “Greeting only” in the standby mode but the number of incoming messages will not be displayed.

Program

GF H

=Yes

Save DIRECT# Set recall time

GF H

=Yes

TAD program

GF H

=Yes

Answering system setting. See base unit.

Save directory Ringer volume

GF H

=Yes

Recording time :3min

Base unit display

Recording time :Greeting only

Base unit display

Preparing the Answering System

Preparation

Selecting the Number of Rings

You can select the number of times the unit rings before the answering system answers a call, from “2” to “7” or “Toll saver”*. Your phone comes from the factory set to “Toll saver”*.

Press (FUNCTION/EXIT/CH).

Press (Å) or (Ä) repeatedly until the arrow points to “Program”.

Press FWD/EDIT (É) (Yes key).

Press (Å) or (Ä) repeatedly until the arrow points to “TAD program”.

Press FWD/EDIT (É) (Yes key).

•The base unit display shows programming options.

Press (2).

•The current setting is displayed on the base unit.

Press (0), or (2) to (7) to set the number of rings.

0: Selects “Toll saver”*. 2–7: The unit will answer after the selected number of rings.

Press FWD/EDIT (É) (Save key).

•A beep sounds.

•To return to the standby mode, press (FUNCTION/EXIT/CH).

*Toll saver

When you call the unit from a touch tone telephone: If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. Hang up when you hear the 3rd ring. This will save you the toll charge for the call.

Program

GF H

=Yes

Save DIRECT# Set recall time

GF H

=Yes

TAD program

GF H

=Yes

Answering system setting. See base unit.

Save directory Ringer volume

GF H

=Yes

Number of rings :Toll saver

Base unit display

Making Calls

Press (TALK).

Dial a phone number.

•The dialled number is displayed.

•After a few seconds, the display will show the

length of the call and the battery strength.

To hang up, press (TALK) or place the handset on the base unit.

•If the handset has lost communication with the base unit, 3 beeps sound and “No

link to base. Place on cradle and try again.” is displayed.

If noise interferes with the conversation

Press (FUNCTION/EXIT/CH) to select a clearer channel or move closer to the base unit.

To redial the last number dialled on the handset

Press (TALK) and press (REDIAL/PAUSE).

Talk

0111112222

Talk

00-00-00

Talk

With the Handset

Off

00-01-08

(TALK)

(FUNCTION/EXIT/CH)

(INTERCOM/CLEAR)

(REDIAL/PAUSE)

Cordless Telephone

To dial after conﬁrming the entered number

Dial a phone number.

•If you misdial, press (INTERCOM/CLEAR) and dial again.

Press (TALK).

•After a few seconds, the display will show the length of the call and the battery strength.

To hang up, press (TALK) or place the handset on the base unit.

To redial after conﬁrming the last number dialled

Press (REDIAL/PAUSE) and press (TALK).

To adjust the receiver volume while talking

To increase, press (Ä). To decrease press (Å).

•Each time you press (Å) or (Ä), the

volume level will change.

•The display will return to the length of

the call.

Backlit handset keypad

The handset dialling buttons will light when you press a button or lift the handset off the base unit, and ﬂash when a call is received. The lights will go out a few seconds after pressing a button, lifting the handset, answering a call, hanging up a call, leaving the programming mode or ending the intercom.

Backlit LCD display

The backlit handset display will stay on for a few seconds after pressing a handset button, lifting the handset off the base unit, hanging up a call, leaving the programming mode or ending the intercom.

Talk

0233334444

Talk

00-00-00

Loud

Low ❚❚❚❚❚❚ High

0233334444

MEDIUM

HIGH

LOW

Loud

Low ❚❚❚❚ High

Loud

Low ❚❚ High

(Å)(Ä)

Making Calls

Press (DIGITAL!SP-PHONE).

•The DIGITAL SP-PHONE indicator

lights.

Dial a phone number.

When the other party answers, talk into the MIC (microphone).

To hang up, press (DIGITAL!SP-PHONE).

•The indicator light goes out.

•To switch to the handset while using the base unit speakerphone:

—If the handset is off the base unit, press (TALK). —If on the base unit, just lift up.

•During a call using the handset, the call can be switched to the speakerphone by

pressing (DIGITAL!SP-PHONE).

Talk

0111112222

Talk

00-00-00

Talk

With the Base Unit (Digital Duplex Speakerphone)

MIC

(DIGITAL!SP-PHONE) and Indicator

(HOLD/RINGER)

(REDIAL/PAUSE)

Off

00-00-00

Cordless Telephone

Hands-free Digital Duplex Speakerphone

For best performance, please note the following:

•Talk alternately with the caller in a quiet room.

•If the other party has difficulty hearing you, press (Å) to decrease the

speaker volume.

•If the other party’s voice from the speaker cuts in/out during a

conversation, press (Å) to decrease the speaker volume.

To adjust the speaker volume (8 levels) while talking

To increase, press (Ä). To decrease, press (Å).

To redial the last number dialled on the base unit

Press (DIGITAL!SP-PHONE) and press (REDIAL/PAUSE).

To put a call on hold

Press (HOLD/RINGER).

•The DIGITAL SP-PHONE indicator ﬂashes.

To release the hold

From the base unit, press (DIGITAL!SP-PHONE). From the handset, press (TALK) or lift the handset off the base unit.

•If another phone is connected on the same line (p. 80), you can also release the

hold by lifting its handset.

Loud

Low ❚❚❚❚❚❚❚❚High

Hold

Ex. Level 8

+ 61 hidden pages

Panasonic KX-TG2583ALS, KX-TG2583NZS User Manual

Contents

Displays