Panasonic KX-MB2010, KX-MB2030 IMPORTANT INFORMATION

Important Information Guide

Multi-Function Printer

Model No.

KX-MB2010BL KX-MB2030BL

Do NOT connect the unit to a computer with the USB cable until prompted to do so during the setup

of Multi-Function Station (CD-ROM).

Accessory information: To ensure that the unit operates properly, we recommend the use of Panasonic toner and drum cartridges.

n Replacement accessory – Toner cartridge

R Model No. (Part No.): KX-FAT411X

– Drum cartridge

R Model No. (Part No.): KX-FAD412X

The supplied Setup CD-ROM provides the Operating Instructions in PDF format with a detailed description on how to use the unit. Adobe® Reader® is required to view them. Please read before using the unit and save the CD-ROM for future reference.

You can select the English, French or Dutch language.

The display and reports will be in the selected language. The default setting is English. If you want to change the setting, see the operating instructions (feature #110).

User record (for your future reference)

Date of purchase

Serial number (found on the rear of the unit)

Dealer’s name and address

Dealer’s telephone number

Attach your sales receipt here.

Note:

R Save the original carton and packing materials for

future shipping and transportation of the unit.

R After unpacking the product, take care of the packing

materials and/or power plug cap appropriately.

R The suffix in the model number will be omitted in

these instructions.

R Most figures shown in these instructions are based

on a KX-MB2010.

Caution: R When you operate this product, the power outlet

should be near the product and easily accessible.

R Be sure to use the telephone line cord supplied

with this unit (KX-MB2030 only).

R Do not extend the telephone line cord

(KX-MB2030 only).

R In the event of problems, you should contact your

equipment supplier in the first instance (KX-MB2030 only).

R This equipment is designed for use on the

Belgium analogue telephone network (KX-MB2030 only).

Declaration of Conformity (KX-MB2030 only):

R Panasonic System Networks Co., Ltd. declares that

this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www.doc.panasonic.de

Information of Compliance with EU relevant Regulatory Directives (KX-MB2010 only):

R Contact to Authorised Representative:

Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany

ENERGY STAR:

R As an ENERGY STAR® Partner, Panasonic has

determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.

Trademarks:

R Adobe and Reader are either registered trademarks

or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

R All other trademarks identified herein are the property

of their respective owners.

R This material is copyrighted by Panasonic System

Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.

Table of Contents

1.1 For your safety 3

1.2 Important safety instructions 5

1.3 Information for Users on Collection and Disposal of Old Equipment and used Batteries

1.4 Illegal copies 6

1.5 Turning the power switch ON 6

1.6 Selecting the operation mode (Scan/ Copy) (Fax: KX-MB2030 only)

1.7 Setting the original 7

1.8 Display messages 7

Contact to Authorised Representative: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany

1.1 For your safety

To prevent severe injury and loss of life/property,

1. . Important Information

read this section carefully before using the unit to ensure proper and safe operation of your unit.

1. Important Information

For safety purposes this unit is equipped with a grounded plug. If you do not have this type of outlet, please have one installed. Do not ignore this safety feature by tampering with the plug.

R The following symbols are used to classify and

describe the level of hazard and injury caused when the denotation is disregarded and improper use is performed.

Denotes a potential hazard that could result in serious injury or death.

Denotes hazards that could result in minor injury or damage to the unit.

R The following symbols are used to classify and

describe the type of instructions to be observed.

This type of symbol is used to alert users to a specific operating procedure that must be performed carefully.

This type of symbol is used to alert users to a specific operating procedure that must not be performed.

This type of symbol is used to alert users to a specific operating procedure that must be emphasized in order to operate the unit safely.

Do not place objects on the power cord. Install the unit where no one can step or trip on the cord.

Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock.

Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.

Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.

Never touch the plug with wet hands. There is a danger of electric shock.

Installation

Place the unit securely on a stable, level surface. Serious damage and/or injury may result if the unit falls.

To prevent the risk of fire or electrical shock, do not expose this product to rain or any type of moisture.

Power and ground connection

Unplug this unit from power outlets if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorised service centre.

Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

Detailed operating instructions are on the CD-ROM.

Use this unit in a well ventilated area. Particularly, if you will be using the unit for extended periods of time or will be printing in large volumes, be sure to ventilate the room sufficiently.

Operating safeguards

Turn the power switch OFF before cleaning. Do not use liquid or aerosol cleaners.

Do not cover slots and openings on the unit. They are provided for ventilation and protection against overheating. Never place the unit near radiators, or in a place where proper ventilation is not provided.

+ 5 hidden pages