Panasonic KX-HNS102FX Operating Instructions

Installation Guide

Home Network System

Motion Sensor

Model No. KX-HNS102FX

Thank you for purchasing a Panasonic product.

This document explains how to install the motion sensor properly.
For details about how to use the system, refer to the User’s Guide
(page 14).

Please read this document before using the unit and save it for future
reference.

Table of Contents

Introduction

Accessory information ...............3

Important Information

About this system ......................4

For your safety ...........................4

Important safety instructions ......5

For best performance ................5

Other information .......................6

Setup

Part names and functions ..........7

LED indicator .............................7

Setup overview ..........................7

Inserting the batteries ................8

Registering the motion

sensor ........................................8

Information about sensor

features ......................................9

Confirming the usage area ......11

Wall mounting ..........................12

Appendix

Testing the motion sensor .......14

Adjusting the sensor

sensitivity .................................14

Features available when using the

[Home Network] app ................14

Accessing the User’s Guide ....14

Specifications ..........................15

2

Introduction

Accessory information

Supplied accessories

No. Accessory item/Part number Quantity

A
B
C Wall mounting screws (25 mm) 2

*1 When replacing batteries, see “Power source” of “Specifications”, page 15

for battery information.

*2 The motion sensor can be wall mounted with or without the wall mounting

adaptor (page 12).

A B C

Other information

R Design and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.

Trademarks

R iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other

countries.

R Android is a trademark of Google Inc.
R Microsoft, Windows, and Internet Explorer are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

R All other trademarks identified herein are the property of their respective owners.

*1

Batteries

Wall mounting adaptor

2

*2

1

3

Important Information

About this system

R This system is an auxiliary system; it

is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.

R The system’s wireless features are

subject to interference, therefore
functionality in all situations cannot
be guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs in
the event of wireless communication
error or failure.

For your safety

To prevent severe injury and loss of life/
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.

WARNING

Power connection

R Use only the power source marked

on the product.

R Do not connect non-specified

devices.

Installation

R To prevent the risk of fire or

electrical shock, do not expose the
product to rain or any type of
moisture.

R Do not place or use this product

near automatically controlled

devices such as automatic doors
and fire alarms. Radio waves
emitted from this product may cause
such devices to malfunction
resulting in an accident.

R Keep small parts (screws, etc.) out

of the reach of children. There is a
risk of swallowing. In the event they
are swallowed, seek medical advice
immediately.

Operating safeguards

R Do not disassemble the product.

Medical

R Consult the manufacturer of any

personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. DECT features
operate between 1.88 GHz and

1.90 GHz with a peak transmission
power of 250 mW.

R Do not use the product in health

care facilities if any regulations
posted in the area instruct you not to
do so. Hospitals or health care
facilities may be using equipment
that could be sensitive to external
RF energy.

CAUTION

Battery

R The batteries should be used

correctly, otherwise the product may
be damaged due to battery leakage.

R Do not charge, short-circuit,

disassemble, or heat the batteries.

R Do not dispose of batteries in a fire.
R Remove all the batteries when

replacing.

4

R Do not mix old, new or different

types of batteries.

R It is recommended that batteries are

replaced annually.

R Keep out of the reach of small

children. There is a risk of
swallowing. If the battery is
swallowed, seek medical attention
immediately.

R Remove the battery if it becomes

unusable. There is a risk of leakage,
overheating, and rupture. Do not
attempt to use a battery if it is
leaking.

R Do not intentionally pour water on

the battery or allow it to get wet.
There is a risk of fire and smoke. If
the battery becomes wet, remove it
immediately and contact an
authorised service centre.

Important safety instructions

When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock,
and injury to persons, including the
following:

1. Do not use this product near water
for example, near a bathtub,
washbowl, kitchen sink, or laundry
tub, in a wet basement or near a
swimming pool.

2. Use only the batteries indicated in
this document. Do not dispose of
batteries in a fire. They may
explode. Check with local codes for
possible special disposal
instructions.

SAVE THESE INSTRUCTIONS

Important Information

For best performance

Hub location/avoiding noise

The hub and other compatible
Panasonic devices use radio waves to
communicate with each other.
R For maximum coverage and

noise-free communications, place
your hub:
– at a convenient, high, and central

location with no obstructions
between the product and hub in
an indoor environment.

– away from electronic appliances

such as TVs, radios, personal
computers, wireless devices, or
other phones.

– facing away from radio frequency

transmitters, such as external
antennas of mobile phone cell
stations. (Avoid putting the hub
on a bay window or near a
window.)

R If the reception for a hub location is

not satisfactory, move the hub to
another location for better reception.

Environment

R Keep the product away from

electrical noise generating devices,
such as fluorescent lamps and
motors.

R The product should be kept free

from excessive smoke, dust, high
temperature, and vibration.

R The product should not be exposed

to direct sunlight.

R Do not place heavy objects on top of

the product.

R The product should be kept away

from heat sources such as radiators,
cookers, etc. It should not be placed
in rooms where the temperature is

5