Panasonic KXHNS101E Operating Instructions
Installation Guide
Home Network System
Window/Door Sensor
Model No. KX-HNS101E
Thank you for purchasing a Panasonic product.
This document explains how to install the window/door sensor
properly.
For details about how to use the system, refer to the User’s Guide
(page 19).
Please read this document before using the unit and save it for future
reference.
For dedicated help, support, or advice, available to help you Monday Friday,
09:00 - 23:00. For U.K., please contact us on 0330 3331112 and
for Ireland 01 4475228.
HNS101E_(en_en)_0421_ver.060.pdf 1 2015/04/21 14:21:39
Introduction
Accessory information ...............3
General information ...................4
Important Information
About this system ......................5
For your safety ...........................
5
Important safety instructions ......6
For best performance ................6
Other information .......................7
Setup
Part names and functions ..........9
LED indicator .............................9
Setup overview ..........................9
Inserting the battery .................10
Registering the window/door
sensor ......................................11
Changing the sensor type ........11
Wireless communication
range .......................................12
Temporary placement ..............13
Installation ...............................16
Appendix
Testing the window/door
sensor ......................................19
Features available when using the
[Home Network] app ................19
Accessing the User’s Guide ....19
Specifications ..........................20
Conditions of guarantee ..........21
2
Table of Contents
HNS101E_(en_en)_0421_ver.060.pdf 2 2015/04/21 14:21:39
Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
A
Battery
*
1
1
B
Mounting screws (20 mm)
*
2
/XMM38+20VW
4
C
Mounting double-sided tapes
*
3
3
*1 When replacing the battery, see “Power source” of “Specifications”, page 20
f
or battery information.
*2 2 screws for the sensor unit and 2 screws for the magnet unit
*3 2 pieces of tape for the sensor unit: PNHS1620Z
1 piece of tape for the magnet unit: PNHS1621Z
A
B C
Other information
R D
esign and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
Trademarks
R i
Phone and iPad are trademarks of Apple Inc., registered in the U.S. and other
countries.
R Android is a trademark of Google Inc.
R Microsoft, Windows, and Internet Explorer are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
R All other trademarks identified herein are the property of their respective owners.
Sales and support information
Customer Communications Centre
R F
or customers within the U.K.: 0330 3331112
R For customers within Ireland: 01 4475228
R For further support on your product, please visit our website:
www.panasonic.co.uk
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
3
Introduction
HNS101E_(en_en)_0421_ver.060.pdf 3 2015/04/21 14:21:39
Direct Sales at Panasonic U.K.
R Order accessory and consumable items for your product with ease and
confidence by phoning our Customer Communications Centre Monday - Friday
9:00am - 5:00pm (Excluding public holidays).
R Go on line through our Internet Accessory ordering application at
www.pas-europe.com
R Most major credit and debit cards accepted.
R All enquiries transactions and distribution facilities are provided directly by
Panasonic U.K.
General information
R T
he objective hub for the following model is shown below:
– KX-HNS101E (Hub: KX-HNB600E)
R Please read “General information” of the hub’s system setup guide for
information regarding R&TTE Directive.
For your future reference
We recommend keeping a record of the following information to assist with any
repair under warranty.
Serial No. Date of purchase
(found inside the sensor unit)
N
ame and address of dealer
Attach your purchase receipt here.
4
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
Introduction
HNS101E_(en_en)_0421_ver.060.pdf 4 2015/04/21 14:21:39
About this system
R This system is an auxiliary system; it
is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.
R The system’s wireless features are
subject to interference, therefore
functionality in all situations cannot
be guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs in
the event of wireless communication
error or failure.
For your safety
T
o prevent severe injury and loss of life/
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.
WARNING
Power connection
R U
se only the power source marked
on the product.
R Do not connect non-specified
devices.
Installation
R T
o prevent the risk of fire or
electrical shock, do not expose the
product to rain or any type of
moisture.
R Do not place or use this product
near automatically controlled
devices such as automatic doors
a
nd fire alarms. Radio waves
emitted from this product may cause
such devices to malfunction
resulting in an accident.
R Keep small parts (magnet unit,
magnet unit cover, screws, etc.) out
of the reach of children. There is a
risk of swallowing. In the event they
are swallowed, seek medical advice
immediately.
Operating safeguards
R D
o not disassemble the product.
Medical
R C
onsult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. DECT features
operate between 1.88 GHz and
1.90 GHz with a peak transmission
power of 250 mW.
R Do not use the product in health
care facilities if any regulations
posted in the area instruct you not to
do so. Hospitals or health care
facilities may be using equipment
that could be sensitive to external
RF energy.
CR Lithium battery
R D
o not recharge, disassemble,
remodel, heat or throw it into fire.
R Do not touch the terminals
and
with metal objects.
R R
isk of explosion if battery is
replaced by an incorrect type.
Dispose of used battery according to
local regulations.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
5
Important Information
HNS101E_(en_en)_0421_ver.060.pdf 5 2015/04/21 14:21:39
R I
f any electrolyte should come into
contact with your hands or clothes,
wash it off thoroughly with water.
R If any electrolyte should come into
contact with your eyes, never rub
your eyes. Rinse your eyes
thoroughly with water, and then
consult a doctor.
CAUTION
General information
R D
o not place magnetic cards or
similar objects near the sensor unit
and magnet unit. Magnetic data on
the cards, etc. may be deleted.
CR Lithium battery
R U
se only the battery noted on
page 3.
R Insert the battery correctly.
R Do not leave the battery in an
automobile exposed to direct
sunlight for a long period of time with
the doors and windows closed.
R Remove the battery if you do not
use the product for a long period of
time. Keep it in a cool, dark area.
R Do not replace a battery with wet
hands.
R Keep out of the reach of small
children. There is a risk of
swallowing. If the battery is
swallowed, seek medical attention
immediately.
R Remove the battery if it becomes
unusable. There is a risk of leakage,
overheating, and rupture. Do not
attempt to use a battery if it is
leaking.
R Exercise care when handling the
batteries. Do not allow conductive
materials such as rings, bracelets, or
keys to touch the batteries,
otherwise a short circuit may cause
t
he batteries and/or the conductive
material to overheat and cause
burns.
Important safety
i
nstructions
When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock,
and injury to persons, including the
following:
1. Do not use this product near water
for example, near a bathtub,
washbowl, kitchen sink, or laundry
tub, in a wet basement or near a
swimming pool.
2. Use only the batteries indicated in
this document. Do not dispose of
batteries in a fire. They may
explode. Check with local codes for
possible special disposal
instructions.
SAVE THESE INSTRUCTIONS
For b
est performance
Hub location/avoiding noise
T
he hub and other compatible
Panasonic devices use radio waves to
communicate with each other.
R For maximum coverage and
noise-free communications, place
your hub:
– at a convenient, high, and central
location with no obstructions
between the product and hub in
an indoor environment.
6
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
Important Information
HNS101E_(en_en)_0421_ver.060.pdf 6 2015/04/21 14:21:39
– away from electronic appliances
s
uch as TVs, radios, personal
computers, wireless devices, or
other phones.
– facing away from radio frequency
transmitters, such as external
antennas of mobile phone cell
stations. (Avoid putting the hub
on a bay window or near a
window.)
R If the reception for a hub location is
not satisfactory, move the hub to
another location for better reception.
Environment
R K
eep the product away from
electrical noise generating devices,
such as fluorescent lamps and
motors.
R The product should be kept free
from excessive smoke, dust, high
temperature, and vibration.
R The product should not be exposed
to direct sunlight.
R Do not place heavy objects on top of
the product.
R The product should be kept away
from heat sources such as radiators,
cookers, etc. It should not be placed
in rooms where the temperature is
less than -10 °C or greater than
40 °C. Damp basements should also
be avoided.
R Operating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances.
Other information
C
AUTION: Risk of explosion if battery
is replaced by an incorrect type.
Dispose of used batteries according to
t
he instructions.
Routine care
R W
ipe the outer surface of the
product with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Disposal of Old Equipment and
B
atteries (Only for European Union
and countries with recycling
systems)
1
2
These symbols (A,
B) on the
products, packaging, and/or
accompanying documents mean that
used electrical and electronic products
and batteries must not be mixed with
general household waste.
For proper treatment, recovery and
recycling of old products and used
batteries, please take them to
applicable collection points in
accordance with your national
legislation.
By disposing of them correctly, you will
help to save valuable resources and
prevent any potential negative effects
on human health and the environment.
For more information about collection
and recycling, please contact your local
municipality.
Penalties may be applicable for
incorrect disposal of this waste, in
accordance with national legislation.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
7
Important Information
HNS101E_(en_en)_0421_ver.060.pdf 7 2015/04/21 14:21:40
Note for the battery symbol
This symbol (B) might be used in
combination with a chemical symbol. In
this case it complies with the
requirement set by the Directive for the
chemical involved.
Note for the battery removal
p
rocedure
Refer to “Inserting the battery” on
page 10.
8
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
Important Information
HNS101E_(en_en)_0421_ver.060.pdf 8 2015/04/21 14:21:40
Loading...