Panasonic EY7542 User Manual
Order Number PTD0707U37CE
Cordless Impact Driver
Model No. EY7542
North America
F16
TABLE OF CONTENTS
1 Warning-------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 5
5 Wiring Connection Diagram ---------------------------------13
6 Schematic Diagram ---------------------------------------------13
7 Exploded View and Replacement Parts List -----------14
PAG E PAG E
© 2007 Matsushita Electric Works, Ltd. All rights
reserved. Unauthorized copying and distribution is a
violation of law.
1Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature soldering iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).
2 Specifications
2
3 Troubleshooting Guide
(Refer to WIRING CONNECTION DIAGRAM)
3
4
4 Disassembly and Assembly Instructions
4.1. Disassembly Instructions
Ref. No. 1A Procedure 1A Removal of the Housings.
1. Loosen the belt hook bolt turning it counterclockwise, using a coin
or a flat blade screwdriver.
2. Take out the belt hook.
3. Remove four screws where tightening fixing cover.
4. Remove eight housing screws.
5. Pull off the fixing cover assembly.
6. Once removing the clutch handle, the out-put shaft may come out.
7. Remove torque click spring and click spring.
8. Then open the housing A and B.
5
Loading...