Panasonic DMR-BCT735, DMR-BCT835 Operating Instructions

Page 1

Operating Instructions

Blu-ray Disc™ Recorder

Model No. DMR-BCT835

DMR-BCT735 DMR-BCT730

Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use.

• This unit is equipped with two CI/CI Plus slots. They can receive encrypted digital broadcast services.

Software (Firmware) Update

Blu-ray Disc technology and broadcast services continue to add new features. As they evolve, firmware updates may be required to support the latest features. Panasonic strives to continually update firmware as new technology is released. It’s very important you install the latest updates to maintain proper operation of your unit. For details, refer to “Software (Firmware) Update” (> 101) or http://panasonic.jp/support/global/cs/ (This site is in English only.)

VQT4W71

Page 2

Safety precautions

WARNING

Unit

• To reduce the risk of fire, electric shock or product damage,

- Do not expose this unit to rain, moisture,

dripping or splashing.

- Do not place objects filled with liquids, such as

vases, on this unit.

- Use only the recommended accessories.

- Do not remove covers.

- Do not repair this unit by yourself. Refer

servicing to qualified service personnel.

- Do not let metal objects fall inside this unit.

- Do not place heavy items on this unit.

AC mains lead

• To reduce the risk of fire, electric shock or product damage,

- Ensure that the power supply voltage

corresponds to the voltage printed on this unit.

- Insert the mains plug fully into the socket

outlet.

- Do not pull, bend, or place heavy items on the

lead.

- Do not handle the plug with wet hands.

- Hold onto the mains plug body when

disconnecting the plug.

- Do not use a damaged mains plug or socket

outlet.

• The mains plug is the disconnecting device. Install this unit so that the mains plug can be unplugged from the socket outlet immediately.

Small object

• Keep the Memory Card out of reach of children to prevent swallowing.

CAUTION

Unit

• This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

• Do not place sources of naked flames, such as lighted candles, on this unit.

• This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

• This unit is intended for use in moderate climates.

Placement

• Place this unit on an even surface.

• To reduce the risk of fire, electric shock or product damage,

- Do not install or place this unit in a bookcase,

built-in cabinet or in another confined space. Ensure this unit is well ventilated.

- Do not obstruct this unit’s ventilation openings

with newspapers, tablecloths, curtains, and similar items.

- Do not expose this unit to direct sunlight, high

temperatures, high humidity, and excessive vibration.

VQT4W71

Page 3

Batteries

CLASS 1 LASER PRODUCT

(Inside of product)

• Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.

• Mishandling of batteries can cause electrolyte leakage and may cause a fire.

- Do not mix old and new batteries or different

types at the same time.

- Do not heat or expose to flame.

- Do not leave the battery(ies) in a car exposed

to direct sunlight for a long period of time with doors and windows closed.

- Do not take apart or short circuit.

- Do not recharge alkaline or manganese

batteries.

- Do not use batteries if the covering has been

peeled off.

- Remove batteries if you do not intend to use

the remote control for a long period of time. Store in a cool, dark place.

• When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

Supplied accessories

Please check and identify the supplied accessories.

(Product numbers are correct as of July 2013. These may be subject to change.)

Remote control (N2QAYB000759): 1pc. Batteries for remote control: 2 pcs. AC mains lead: 1pc. RF coaxial cable: 1pc.

• Do not use AC mains lead with other equipment.

Indemnity concerning recorded content

Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content (data), and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit (including any other non-HDD related component).

Restriction on use of unauthorized copied content

This unit adopts the following technology for copyright protection.

Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some

commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.

To request additional

VQT4W71

Page 4

Table of contents

Safety precautions . . . . . . . . . . . . . . . . . . . . . . 2

Supplied accessories . . . . . . . . . . . . . . . . . . . . 3

Getting started

HDD and media information. . . . . . . . . . . . . . . 6

- Recordable/playable contents . . . . . . . . . . . . . . . . 6

- Recording mode . . . . . . . . . . . . . . . . . . . . . . . . . 8

-Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Control reference guide . . . . . . . . . . . . . . . . . 12

CI (Common Interface) module . . . . . . . . . . . 14

- About CI Plus compatible broadcast . . . . . . . . . . . 15

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

- Basic connections . . . . . . . . . . . . . . . . . . . . . . . 16

- Amplifier/receiver connections . . . . . . . . . . . . . . . 18

- Network connection . . . . . . . . . . . . . . . . . . . . . . 20

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

- TV operation buttons . . . . . . . . . . . . . . . . . . . . . 21

- Easy Setting . . . . . . . . . . . . . . . . . . . . . . . . . . 22

- Easy Network Setting. . . . . . . . . . . . . . . . . . . . . 24

FUNCTION MENU screen . . . . . . . . . . . . . . . 26

Watching broadcasts

Watching broadcasts . . . . . . . . . . . . . . . . . . . 27

- Using Channel List . . . . . . . . . . . . . . . . . . . . . . 28

- Using TV Guide system . . . . . . . . . . . . . . . . . . . 28

- Using channel information . . . . . . . . . . . . . . . . . . 29

- Operations while watching broadcast . . . . . . . . . . . 29

- REWIND LIVE TV/PAUSE LIVE TV. . . . . . . . . . . . 31

Recording

Recording TV programmes . . . . . . . . . . . . . . 32

- Operation during Recording. . . . . . . . . . . . . . . . . 33

- Notes for recording of an encrypted broadcast . . . . . 34

Timer recording . . . . . . . . . . . . . . . . . . . . . . . 36

- Manually programming timer recording. . . . . . . . . . 37

- Timer recording options . . . . . . . . . . . . . . . . . . . 37

- Timer recording from channel information . . . . . . . . 38

- Remote recording from outside. . . . . . . . . . . . . . . 38

- Notes on timer recording. . . . . . . . . . . . . . . . . . . 38

- To confirm and edit a timer programme . . . . . . . . . 39

Playing back video

Playing titles on the HDD . . . . . . . . . . . . . . . . 40

- DIRECT NAVIGATOR screen . . . . . . . . . . . . . . . 40

Playing titles on the media . . . . . . . . . . . . . . . 43

- Notes for BD-Live discs . . . . . . . . . . . . . . . . . . . 44

Operation during play. . . . . . . . . . . . . . . . . . . 45

- General operations . . . . . . . . . . . . . . . . . . . . . . 45

- 3D video playback. . . . . . . . . . . . . . . . . . . . . . . 47

Editing video

Deleting/Editing recorded titles . . . . . . . . . . . 49

- Deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

- Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Copying video

Copying titles . . . . . . . . . . . . . . . . . . . . . . . . . 55

- Copying from media other than HDD with

DIRECT NAVIGATOR

- Copying titles with copying list . . . . . . . . . . . . . . . 57

- Notes for copying . . . . . . . . . . . . . . . . . . . . . . . 60

- Copying a finalised disc . . . . . . . . . . . . . . . . . . . 61

- Copying Title Playing . . . . . . . . . . . . . . . . . . . . . 62

- Copying HD Video (AVCHD) to the DVD-R in

High Definition

. . . . . . . . . . . . . . . . . . . . 57

. . . . . . . . . . . . . . . . . . . . . . . . . 63

Photo and Music

Playing photos . . . . . . . . . . . . . . . . . . . . . . . . 64

- Photo Menu screen . . . . . . . . . . . . . . . . . . . . . . 64

- Photo play option . . . . . . . . . . . . . . . . . . . . . . . 65

- Slideshow settings . . . . . . . . . . . . . . . . . . . . . . 65

Editing photos . . . . . . . . . . . . . . . . . . . . . . . . 66

Copying photos . . . . . . . . . . . . . . . . . . . . . . . 67

- Selecting and copying the photos . . . . . . . . . . . . . 67

- Copying automatically . . . . . . . . . . . . . . . . . . . . 67

Playing music . . . . . . . . . . . . . . . . . . . . . . . . . 68

- Copying music (MP3) to HDD . . . . . . . . . . . . . . . 68

- Playing music recorded on HDD . . . . . . . . . . . . . . 69

- Operations during music play. . . . . . . . . . . . . . . . 70

Editing music/playlist . . . . . . . . . . . . . . . . . . . 71

Network

Smart Home Networking (DLNA) . . . . . . . . . . 72

- Using this unit as Server . . . . . . . . . . . . . . . . . . . 72

- Using this unit as Client . . . . . . . . . . . . . . . . . . . 73

- Using this unit as Media Renderer. . . . . . . . . . . . . 74

- Using Smart Home Networking (DLNA) with

Wi-Fi Direct

- Using Miracast

. . . . . . . . . . . . . . . . . . . . . . . . . . 75

. . . . . . . . . . . . . . . . . . . . . . . . 75

Enjoying Network Service . . . . . . . . . . . . . . . 76

- To enjoy video communication (e.g., SkypeTM) . . . . . 76

With Other Equipment

Recording from external equipment. . . . . . . . 77

Copying the HD Video (AVCHD) . . . . . . . . . . 78

Registering the external HDD (USB HDD)

- Connecting the USB HDD . . . . . . . . . . . . . . . . . . 79

- Disconnecting the USB HDD . . . . . . . . . . . . . . . . 79

- Registering the USB HDD . . . . . . . . . . . . . . . . . . 80

. . . . . . 79

VQT4W71

Page 5

Convenient functions

VIERA Link functions . . . . . . . . . . . . . . . . . . . 81

Playback menu. . . . . . . . . . . . . . . . . . . . . . . . 82

Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . 84

- Common procedures . . . . . . . . . . . . . . . . . . . . . 84

- DVB Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

- HDD / Disc / USB HDD. . . . . . . . . . . . . . . . . . . . 89

-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

- Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

- Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

- Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

-Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

- Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

- Language code list . . . . . . . . . . . . . . . . . . . . . 100

Software (Firmware) Update . . . . . . . . . . . . 101

- Update software (firmware) of this unit . . . . . . . . . 101

- CI Plus compatible CAM software (firmware)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

update

Other operations . . . . . . . . . . . . . . . . . . . . . 102

- Media management . . . . . . . . . . . . . . . . . . . . . 102

- Entering text . . . . . . . . . . . . . . . . . . . . . . . . . 104

- Switching the aspect ratio of the screen . . . . . . . . 105

- HOLD function . . . . . . . . . . . . . . . . . . . . . . . . 105

Troubleshooting

Troubleshooting guide . . . . . . . . . . . . . . . . . 106

- General operation . . . . . . . . . . . . . . . . . . . . . . 106

- Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

- TV screen and video . . . . . . . . . . . . . . . . . . . . 107

- Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

- Recording, timer recording and copying . . . . . . . . 109

-Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

-Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

- Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

-USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

-TV Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

- Broadcast . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

- VIERA Link . . . . . . . . . . . . . . . . . . . . . . . . . . 112

-Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

-Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

- Messages on the unit’s display . . . . . . . . . . . . . . 113

- When you experience problems with

Easy Network Setting

. . . . . . . . . . . . . . . . . . . . 115

Reference

Specifications . . . . . . . . . . . . . . . . . . . . . . . . 117

Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

About descriptions in these operating instructions

• These operating instructions are applicable to models DMR-BCT835, DMR-BCT735 and DMR-BCT730. The illustrations in these Operating Instructions show images of DMR-BCT835 unless otherwise indicated.

• [BCT835] :

indicates features applicable to DMR-BCT835 only.

• [BCT735] :

indicates features applicable to DMR-BCT735 only.

• [BCT730] :

indicates features applicable to DMR-BCT730 only.

• Pages to be referred to are indicated as “> ±±”.

Getting started

Watching broadcasts

Recording

Playing back video

Editing video

Copying video

Photo and Music

Network

With Other Equipment

Convenient functions

Troubleshooting

Reference

VQT4W71

Page 6

Getting started

HDD and media information

For more details, refer also to the specifications. (> 117)

Recordable/playable contents

Media type Standard symbol Recordable contents Playable contents

• Video

Built-in hard disk drive

§1

(HDD)

External hard disk drive

(USB HDD)

§1

(> 9)

BD-Video

[HDD]

[USB_HDD]

[BD-V]

• AVCHD/AVCHD 3D

•JPEG

• MPO (3D photo)

•MP3

§2

• Video

–

• AVCHD/AVCHD 3D

•MP4

• Xvid

•JPEG

• MPO (3D photo)

•MP3

•Video

(–: Impossible)

§3, 4

• MPEG2

•MKV

BD-RE

BD-R

DVD-Video

DVD-RAM

DVD-R

DVD-R DL

§1

[BD-RE]

• Video

• AVCHD/AVCHD 3D

•JPEG

• MPO (3D photo)

• Video

[BD-R]

• AVCHD/AVCHD 3D

–

§5

§3

• Xvid • MKV

•Video

[DVD-V] –

§1

[RAM]

• Video

•JPEG

• MPO (3D photo) –

•AVCHD

§3

• Video

• AVCHD

[DVD-R]

§3

• Xvid • MKV

–

•JPEG

• MPO (3D photo)

•MP3

VQT4W71

Page 7

Getting started

(–: Impossible)

Media type Standard symbol Recordable contents Playable contents DVD-RW

§1

[DVD-RW]

• Video

• AVCHD

§3

–

+R/+R DL [+R]

§1

+RW

Audio CD (CD-DA)

[+RW]

• Video

–

• AVCHD

§3

•Music

–

(including CD-R/RW)

[CD]

–

•Xvid •MKV

•JPEG

• MPO (3D photo)

•MP3

SD Cards

§1

[SD]

•JPEG

• MPO (3D photo)

• AVCHD/AVCHD 3D

•MP4 •JPEG

• MPO (3D photo)

• AVCHD/AVCHD 3D

USB memory [USB]

•MP4

–

•Xvid

•JPEG

•MPEG2

•MKV

• MPO (3D photo)

•MP3

Playable contents as DLNA client

Refer to “Playable contents”. (> 74)

§1

Rewritable media

§2

It cannot be recorded directly. (Only compatible with copying from the built-in HDD)

§3

Recorded with AVCHD format compatible devices (Panasonic video camera, etc.). It may not be able to play back, add, or edit depending on the device.

§4

It cannot be played back directly from the USB HDD or USB memory. Playback is possible by copying to the built-in HDD. (> 78)

§5

Includes finalised DVD-R, DVD-R DL, DVD-RW, +R and +R DL.

§3

§3, 4

• [+RW] This unit cannot record to 8X Speed +RW disc.

• The producer of the disc can control how d iscs are played. So you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully.

• With certain recording states and folder structures, the play order may differ or playback may not be possible.

VQT4W71

Page 8

Getting started

HDD and media information

About extension of files

MP4: “.MP4” “.mp4” “.MOV” “.mov” MPEG2: “.MPG” “.mpg” “.MPEG” “.mpeg” “.M2TS” “.m2ts”

Xvid: “.AVI” “.avi”

Subtitle text files: “.SRT” “.srt” “.SUB” “.sub” “.TXT” “.txt”

MKV: “.MKV” “.mkv”

Subtitle text files: “.SRT” “.srt” “.SSA” “.ssa” “.ASS” “.ass”

JPEG: “.JPG” “.jpg” MPO: “.MPO” “.mpo” MP3: “.MP3” “.mp3”

• The video file and subtitle text files are inside th e same folder, and the file names are the same except for the file extensions.

• Some files may not be played back even if they have these extensions.

“.MTS” “.mts” “.TS” “.ts”

“.SUB” “.sub” “.TXT” “.txt”

Recording mode

Recording Mode DR HG/HX/HE/HL/HM XP/SP/LP/EP/FR

Feature Programmes can be

recorded in a nearly perfect broadcasted state.

Quality Quality as the broadcast

Recordable

media

Recording can be done with reduced recording volume in HD quality.

High definition

§1

Recording can be done with reduced recording volume in SD quality.

Standard definition

Multiple audio Record all multiple audio Record only one audio

Subtitles /

Can be recorded

Can be recorded (only one subtitle or teletext)

Teletext

Surround audio Surround audio as the

broadcast

Surround audio produced by conversion of

Stereo audio

broadcast audio format

§1

The SD quality programme can not be converted to HD quality.

§2

You cannot select during play whether it appears or disappears.

Approximate recording times

Refer to “Recording modes and approximate recording times”. (> 121)

• FR (Flexible Recording Mode)

The unit automatically selects the best possible recording rate between XP mode and EP mode.

VQT4W71

§2

Page 9

Getting started

Notes

Notes for an External HDD (USB HDD)

You can use an external HDD in the following two ways. (A single HDD cannot handle those two ways simultaneously.)

• For recorded titles

Moving titles in the built-in HDD to a USB HDD to save the capacity of the built-in HDD.

• The USB HDD must first be registered on this

unit. (> 79)

• For data files

Playing back MP4, JPEG, MP3, etc. (data files) in a USB HDD with this unit.

• The USB HDD must be formatted in FAT12,

FAT16, FAT32 and NTFS file system.

• The USB HDD over 2 TB is not usable.

• This unit supports USB 2.0 High Speed.

• Although this unit can use USB 3.0 dev ices as USB 2.0 devices, in certain cases USB 3.0 devices cannot be used due to differing connector shape, larger current ratings, etc. (Use of USB 2.0 devices is recommended.)

• This unit does not recognize USB HDDs other than those in which the size of one sector is 512-bytes or 4096-bytes. (For details, consult the dealer of your USB HDD.)

• This unit does not guarantee connectio n with all USB devices.

Notes for the disc

• Region management information BD-Video:

This unit can play BD-Video discs supporting the region code “B”.

e.g.,

• Disc recorded on another device

• It may be necessary to finalize the disc, create Top Menu or close the session on the equipment used for recording to play on this unit.

• [DVD-RW] Recorded in DVD Video Recording (DVD-VR) format

- This unit can play back and copy to HDD.

- This unit does not support editing or

recording.

- It is possible to record and edit with

DVD-Video (DVD-V) format by formatting discs with this unit.

• Recording may not be possible to discs which were used for recording on other equipment.

• Play on other players

• [BD-RE] [BD-R] When these discs cannot be played back on other Blu-ray Disc players, etc. (e.g., title recorded with HE-AAC audio format), convert the recording mode to play them back. (> 52, File Conversion)

• [DVD-R] [DVD-RW] [+R] Finalisation is needed. (> 104)

• [+RW] If the disc failed to play on other equipment, we recommend you create a Top Menu (> 104).

• [DVD-R] The disc created in AVCHD format can only be played back on AVCHD compatible equipment.

• Regarding 8 cm Disc

This unit cannot record or edit the 8 cm disc. Only playback or copy to the HDD is possible.

• Discs that cannot be played

- DVD-RAM that cannot be removed from their cartridges

- 2.6 and 5.2 GB DVD-RAM, 12 cm

- DVD-Audio

- HD DVD

- Super Video CD, Super Audio CD, Video CD

- CD-ROM, Photo CD, PD, etc.

DVD-Video:

This unit can play DVD-Video discs supporting the region number “2” or “ALL”.

e.g.,

• Operation and sound quality of CDs th at do not conform to CD-DA specifications (copy control CDs, etc.) cannot be guaranteed.

VQT4W71

Page 10

Getting started

DO NOT

DO DO NOT

DO NOT

HDD and media information

Notes for the SD cards

• Compatible SD card

- SD Memory Card (from 8 MB to 2 GB, FAT12 and FAT16 formats)

- SDHC Memory Card (from 4 GB to 32 GB, FAT32 format)

- SDXC Memory Card (48 GB, 64 GB, exFAT format)

• Using miniSD card or microSD card

Mini-type and micro-type cards can also be used, but must be used with adaptor cards (optional).

To format an SD card

Refer to “Format Disc/Format Card”. (> 103)

• Usable memory is slightly less than the card capacity.

• If the SD card is formatted on other equip ment, the time necessary for recording may be longer or the card may not be able to be used on this unit. In these cases, format the card on this unit.

• SDHC Memory Cards and SDXC Memory Cards can b e used in equipment that is compatible with the appropriate cards. (SDHC Memory Cards can also be used in equipment compatible with SDXC Memory Cards)

Notes for the USB memories

USB memories support FAT12, FAT16, FAT32 and NTFS file systems.

Media handling

• Do not touch the recorded surface of the discs or the terminal surface of the SD cards.

• If there is dirt or condensation on the disc, wipe with a damp cloth and then wipe dry.

• Do not attach labels or stickers to discs.

• Do not use disc cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

• Do not use ballpoint pens or other hard writing implements, when writing on the label side of the disc.

• Do not drop, stack, or impact discs.

• Do not place objects on discs.

• Do not use the following discs:

- Discs with exposed adhesive from removed

stickers or labels (rental discs, etc.).

- Discs that are badly warped or cracked.

- Irregularly shaped discs.

• The USB memory over 2 TB is not usable.

• This unit supports USB 2.0 High Speed.

• This unit does not guarantee connectio n with all USB devices.

VQT4W71

• Do not expose the terminals of the SD card to water, garbage or other strange things.

• Do not place in the following areas:

- In hot places, such as under the direct

sunlight.

- In very dusty or humid areas.

- Locations susceptible to significant difference

in temperature (condensation can occur).

- Where static electricity or electromagnetic

waves occur.

Page 11

Unit care

Getting started

HDD/USB HDD handling care

• The HDD is a high precision device

The HDD is a high precision recording instrument and is easily susceptible to damage. Therefore, be careful of the following points while the unit is turned on, especially during operation, otherwise the HDD and the recorded content may be damaged:

- Do not subject the unit to any vibration and shock.

- Do not remove the AC mains lead from the household mains socket.

• The HDD is a temporary storage device

• The HDD is not an everlasting storage device. It is recommended to save the recorded content on a disc or to keep the original data or CDs that they were copied from.

• If you notice a problem with the HDD such as repetitive strange sounds, immediately save (backup) all content and request service. If you continue using the HDD with a problem, the unit or the recorded content will be damaged.

• If the HDD or USB HDD is damaged, the recorded content cannot be recovered.

Setup precautions

• Place the unit on a surface that is flat and not subject to vibration or impact.

• Do not place on anything that generates heat like a Set Top Box, etc.

• Place in an area where condensation does not occur. Conditions where condensation may occur

- When there is an extreme change in

temperature (e.g., when subjected to an air conditioner or when cooled air directly impacts the unit).

- When there is high humidity or a lot of steam

in the room.

In the above situation, without turning the unit on, let the unit adjust to the room temperature and wait 2–3 hours until condensation is gone.

• The unit may breakdown if cigarette smoke or bug spray/vapour, etc. gets inside the unit.

When moving the unit

Before moving the unit, ensure the disc tray is empty. 1 Switch the unit to standby mode. (Wait until

“BYE” disappears from the display.)

2 Remove the AC mains lead from the

household mains socket.

3 Move only after the unit has come to a

complete stop (approx. 3 minutes) in order to avoid subjecting to vibration and shock. (Even after the unit is switched to standby mode, the HDD continues operating for a short time.)

Cleaning

• This unit

- Wipe with a soft, dry cloth.

- Never use alcohol, paint thinner or benzine to clean this unit.

- Before using chemically treated cloth, carefully read the instructions that came with the cloth.

• This unit’s lens

• Use the Lens cleaner (optional) to clean the unit’s lens.

Lens cleaner: RP-CL720AE

• This lens cleaner may not be available for sale in all countries, e.g. not available in Germany, please consult your Panasonic dealer for advice.

When requesting this unit for repair

The registration of the USB HDD may be cancelled in the process of repairing this unit. You can use the USB HDD again by re-registering, but all recorded content already on the USB HDD will be lost. In such cases, the recorded content (data) cannot be recovered.

To dispose or transfer this unit

This unit may contain private information. Before disposing of or transferring this unit, perform the following to delete the data, including personal or secret information:

- Format HDD (> 84, 91)

- Perform “Shipping Condition” (> 84, 100)

VQT4W71

Page 12

Getting started

STATUS

RETURN

PLAY/x1.3

PAUSE

PAUSE LIVE TV

STOP

SLOW/SEARCH

SKIP

PAGE

RADIO/

INPUT



DRIVE SELECT



EXIT

OPTION

VOL

abc

jkl

tuv

ghi

qrs

def

mno

xyz

PROG/CHECK

DEL

AUDIO

-10s +60s

REC MODE

INPUT SELECT

REC TEXT STTL

CHAPTER

MANUAL SKIP

REWIND LIVE TV

INTERNET

LAST VIEW

TIME SLIP

 

 

















 



















  

  



 

R6/LR6, AA

(Alkaline or manganese batteries)

Control reference guide

Instructions for operations are generally described using the remote control.

Remote control

9 Show DIRECT NAVIGATOR, Top Menu,

Pop-up Menu (> 40)

: Show OPTION menu (> 50, 66, 71) ; Colour buttons (Use in accordance with

instruction on the screen.)

< Start recording (> 32, 77) = Select a conversion mode/recording mode

(> 32, 77)

> Show the Timer Recording screen (> 37) ? Create chapter (> 46) @ Input select (> 27, 77) A To delete unwanted recorded titles, timer

programmes, photos or music (> 49)

B TV operation buttons (> 21) C Channel select (> 27)/Change pages in the

DIRECT NAVIGATOR screen etc.

D Show the Network Service screen (> 76)

1 Transmit the remote control signal

• Point it at remote control signal sensor on this unit. (> 13)

2 Switch the unit from on to standby mode or

vice versa

3 Select drive (HDD, BD, SD or USB) 4 Select channels and title numbers, etc./Enter

numbers or characters

5 Switch to the previously watched channel

(> 27)

6 Basic operations for recording and play,

REWIND LIVE TV/PAUSE LIVE TV (> 31)

7 Show Information (> 29, 41, 45) 8 Selection/OK, Frame-by-frame (> 46)

VQT4W71

E Switching to the radio channel list (> 27) F Start up a video communication (> 76) G Exit the menu screen H Show the TV Guide screen (> 28) I Show the FUNCTION MENU screen (> 26) J Ret K Show subtitles (> 29, 47) L Show Teletext (> 30, 47) M Select audio (> 29, 47) N Skip the specified time (> 46) O Skip approx. 1 minute forward (> 46) P Skip approx. 10 seconds backward (> 46)

Insert batteries

Insert so the poles (i and j) match those in the remote control.

urn to previous screen

Page 13

Getting started

Pull to flip down the front panel.



SD card

USB memory

Disc

Display

Main unit



   

6 Recording indicator

• The indicator will light up while recording.

• The indicator will blink while recording is

1 Standby/on switch (Í/I)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 Open/close disc tray

paused and before recording starts.

7 Remote control signal sensor

• Angle: Approx. 20° up and down, 30° left and right

• Distance: Within approx. 7 m in front of the unit

8 St op 9 Start play

: CI (Common Interface) slot (> 14) ; CI module eject button (> 14)

Display

12 5 6743

HDD

COPY

3 Disc tray 4 USB port 5 SD card slot

• When removing the SD card, press on the centre of the card and pull it straight out.

• While writing to/reading from the media, do not switch the unit to standby mode or remove the media. Such action may result in loss of the media contents.

• When inserting the media, ensure that it is facing the right way up.

1 Drive (HDD, BD or SD) indicator 2 Disc indicator 3 Copying indicator 4 USB port indicator 5 SD card slot indicator 6 Timer recording indicator

• This indicator lights up when the timer recording standby is activated.

7 Remote control signal indicator 8 Main display section indicator

- Current time

- Playback counter

- Various messages (> 113)

9 Playback indicator



SDUSB

PLAY

VQT4W71

Page 14

Getting started

CAM

Smart Card

CI module

CI (Common Interface) slot

This unit

CI module

CI (Common Interface) module

An appropriate CI module is required to view or record the encrypted broadcast.

You need a CI module, CAM (Conditional Access Module) together with a certified Smart Card, and a subscription with the corresponding broadcaster.

• If not viewing/recording an encrypted broadcast, you do not need to insert the CI module.

1 Insert the certified Smart Card into the CAM (both optional).

2 Insert the CI module into the CI (Common Interface) slot of this unit.

TV service encryption is automatically decrypted and the broadcast can be viewed or recorded. (The recording might be prohibited by broadcasters.)

• Some CAMs may request a PIN. If prompted to enter a PIN code, enter the PIN code with the number buttons.

• If the PIN is not entered, timer recording may not work correctly. The PIN for timer recording can be entered later. (> 84, 90, PIN Entry for Decrypt Recording)

Notes for recording of an encrypted broadcast (> 34)

• You can insert one or two different CAMs with Smart Cards into this unit.

• Be sure to insert the CI module horizontally into the slot.

• Insert the CAM and the Smart Card with the correct direction.

• When removing the CI module, press the CI module eject button and pull it straight out.

• For more details, see the manual of the CAM and Smart Card, or consult the dealer.

• The Common Interface supports the modules that comply with DVB Specification and CI Plus Specification.

• Turn off the unit before you insert or remove the CI module.

VQT4W71

Page 15

Getting started

About CI Plus compatible broadcast

“CI Plus” is a technical specification that imposes contents protection, etc.

CI Plus contents protection

When the CI Plus compatible broadcast is recorded, the title may be contents protected. There are following types of the contents protection depending on the broadcast:

• Copying not restricted

Depending on the title, you can copy/move only to USB HDD, BD-RE, BD-R, or DVD-RAM (CPRM compatible discs only).

• One generation copy is permitted

You can copy to BD-RE, BD-R or DVD-RAM (CPRM compatible discs only) only once.

• The original title will be deleted.

• You cannot copy from the copied BD-RE,

BD-R or DVD-RAM (CPRM compatible discs)

to HDD or another disc. When convert recording mode, the original title will be deleted.

• icon will appear on the DIRECT

NAVIGATOR screen. (> 40)

• Copying is prohibited

You cannot copy/move to the USB HDD or disc. The content of these media may also have the following playback restrictions.

- Retention limit (> right)

- Content License (> right)

Retention limit

There are some titles for which the playback will be disabled after a predetermined time. (e.g., Permitted playback period is 90 minutes after recording.)

• When the title does not have playback period,

icon will appear on the DIRECT

NAVIGATOR screen after decrypting. (> 40)

• When the title has playback period, or

icon will appear on the DIRECT NAVIGATOR screen after decrypting. (> 40)

Content License

Playing back a title with this restriction requires a CAM with a playback licence for it.

• The number of times the title can be played back may also be limited.

• When the title does not have playback period,

icon will appear on the DIRECT

NAVIGATOR screen after decrypting. (> 40)

• When the title has playback period, icon

will appear on the DIRECT NAVIGATOR screen after decrypting. (> 40)

Parental Control

Playing back a title with this restriction requires a CAM and enter the PIN code.

• icon will appear on the DIRECT

NAVIGATOR screen. (> 40)

Operator profile

Depending on your CAM, the channel list can be updated to the one recommended by the CAM.

For details, refer to “About Operator profile”. (> 30)

• All CI Plus compatible broadcasts are encrypted. It may take some time to display them.

• For details, refer to your CAM’s operating instructions or consult your dealer.

VQT4W71

Page 16

Getting started

AV IN (EXT)

VIDEO

HDMI

VHF/UHF

RF IN

This unit’s rear panel

Household mains socket (AC 220 to 240 V, 50 Hz)

AC mains lead (supplied)

• Connect only after all other connections are complete.

HDMI cable

TV’s rear panel

RF coaxial cable (supplied)

To the CATV terminal or the aerial

CATV coaxial cable or aerial cable

Connection

Basic connections

3D programmes can be played back when this unit is connected to a 3D compatible TV.

• Before connection, turn off all equipment and read the appropriate operating instructions.

VQT4W71

Page 17

Getting started

Set Top Box or video equipment

21-pin Scart cable

To connect and register the USB HDD (optional)

Refer to “Registering the external HDD (USB HDD)”. (> 79)

To connect the Communication Camera (optional)

Refer to “Enjoying Network Service”. (> 76)

About HDMI cable

Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal or 24p(4K) signal, please use HDMI Cables 5.0 meters or less.

When the unit is not to be used for a long time

To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when the unit is in standby mode.

[approx. 0.2 W (“Quick Start” is not activated and “RF OUT ( CATV Signal )” or “RF OUT ( Aerial Signal )” is set to “Off”)]

Connect the Set Top Box or video equipment

AV IN (EXT)

VIDEO

A 21-pin Adaptor is required for AUDIO/VIDEO terminal.

• This unit cannot connect the TV that does not have the HDMI terminal.

• Keep the RF coaxial cables as far away as possible from other cables.

• The HDMI connection supports VIERA Link “HDAVI Control” (> 81).

• You cannot connect this unit to DVI devices that are incompatible with HDCP. Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)

• If you are connecting to a TV that is on ly compatible with 2 channel audio output, audio with 3 channels or more will be down mixed and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)

VQT4W71

Page 18

Getting started

HDMI

HDMI INHDMI OUT

HDMI cable

Amplifier/

receiver

HDMI cable

(ARC compatible)

3D programmes can be played back when this unit is connected to a 3D compatible amplifier/receiver and a 3D compatible TV.

• You will not be able to view 3D programmes with this connection if your amplifier/receiver is not 3D compatible.

HDMI IN

HDMI

HDMI cable

Amplifier/receiver

HDMI cable

(ARC compatible)

3D programmes can be played back when this unit is connected to a 3D compatible TV.

• This connection only supports up to 5.1ch.

Connection

Amplifier/receiver connections

HDMI terminal

∫ Amplifier/receiver not compatible with 3D

• VIERA Link function is possible by connect ing to a TV or amplifier/receiver compatible with VIERA Link.

• When using a TV or an amplifier/receiver that does not display “ARC compatible” on the HDMI terminal, it is necessary to connect the TV and the amplifier/receiver with a digital audio cable to enjoy the TV audio on the amplifier/receiver.

VQT4W71

• VIERA Link function is possible by conn ecting to a TV or amplifier/receiver compatible with VIERA Link.

• When using a TV or an amplifier/receiver t hat does not display “ARC compatible” on the HDMI terminal, it is necessary to connect the TV and the amplifier/receiver with a digital audio cable to enjoy the TV audio on the amplifier/receiver.

Page 19

Getting started

AV IN

VIDEO

OPTICAL IN

Amplifier/receiver

Optical digital

audio cable

AV IN

VIDEO

COAXIAL IN

Amplifier/receiver

Coaxial cable

AV IN (EXT)

VIDEO

AUDIO IN

Audio cable

Amplifier/receiver

DIGITAL AUDIO OUT terminal

∫ Using Optical digital audio cable

∫ Using Coaxial cable

AUDIO OUT terminal

• Connect to terminals of the same colour.

• When you do not want the audio to be output from the TV, set “HDMI Audio Output” to “Off” (> 84, 95).

VQT4W71

Page 20

Getting started

Broadband router, etc.

Internet

LAN (ethernet) cable

Internet

Wireless router, etc.

Wireless LAN antenna

Connection

Network connection

When this unit is connected to the network, you can enjoy network functions (DLNA function, Network Service , Remote Recording, etc.).

For details about connection method, refer to the instructions supplied with the connected equipment.

After you make the LAN cable/Wireless LAN connection, the network setting is needed. (> 24, Easy Network Setting)

∫ Precautions of Wireless LAN connection

The following limits are in place regarding the usage of this unit. You must be aware of these limits before using this unit. Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this unit.

• Data transmitted and received over radio waves may be intercepted and monitored.

• This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and follow the following points:

- Do not expose this unit to high temperatures

or direct sunlight.

- Do not bend, or subject this unit to strong

impacts.

- Keep this unit away from moisture.

- Do not disassemble or alter this unit in any

way.

LAN cable connection

• Use category 5 or above straight LAN c ables (STP) when connecting to peripheral devices.

• Inserting any cable other than a LA N cable in the LAN terminal can damage the unit.

Wireless LAN connection

AV IN (EXT)

VIDEO

• For up-to-date compatibility information on your Wireless router refer to http://panasonic.jp/support/global/cs/ (This site is in English only.)

• The unit is not compatible with public wireless LAN services.

• Do not cover the wireless LAN antenna with a cable, etc. This will deteriorate the radio wave reception of this unit.

VQT4W71

Page 21

Settings

TV operation buttons (> right)

Select and enter buttons

To return to the previous screen

To exit the screen

FUNCTION MENU (> 26)

STATUS

RETURN

PLAY/x1.3

PAUSE

PAUSE LIVE TV

STOP

SLOW/SEARCH

SKIP

PAGE

RADIO/

INPUT



DRIVE SELECT



EXIT

OPTION

VOL

abc

jkl

tuv

1 4

ghi

qrs

def

mno

xyz

TIME SLIP

PROG/CHECK

DEL

AUDIO

-10s +60s

REC MODE

INPUT SELECT

REC TEXT STTL

CHAPTER

MANUAL SKIP

REWIND LIVE TV

INTERNET

LAST VIEW

Getting started

TV operation buttons

The TV can be operated from the TV operation buttons of the remote control.

• Perform the setting if you cannot operate the TV with the TV operation buttons.

While pressing [TV Í], enter the code with the number buttons.

Manufacturer and Code No.

Brand Code Brand Code

Panasonic 01/02/03/04 AIWA 35 AKAI 27/30 BEKO 05/71/72/73/74 BENQ 58/59 BRANDT 10/15 BUSH 05 CENTREX 66 CURTIS 05 DAEWOO 64/65 DESMET 05 DUAL 05 ELEMIS 05 FERGUSON 10/34 FINLUX 61 FISHER 21 FUJITSU 53 FUNAI 63/67 GOLDSTAR 05/50/51 GOODMANS 05 GRADIENTE 36 GRUNDIG 09 HITACHI 05/22/23/40/41 IRRADIO 30 ITT

25 JVC 17/30/39/70 KDS 52 KOLIN 45 KONKA 62

05/50/51 MAG 52 METZ 05/28/79 MITSUBISHI 05/19/20/47

MIVAR 24

• If your TV brand has more than one code listed, select the one that allows correct operation.

• If the brand of your TV is not listed o r the code number is invalid for your TV, this remote control is not compatible with your TV.

NEC 36 NOBLEX 33 NOKIA 25/26/27/60/61 NORDMENDE 10 OLEVIA 45 ONWA 30/39/70 ORION 05 PEONY 49/69 PHILCO 41/48/64 PHILIPS 05/06/46 PHONOLA 05 PIONEER 37/38 PROVIEW 52 PYE 05 RADIOLA 05 SABA 10 SALORA 26

32/42/43/65/68SAMSUNG SANSUI 05 SANYO 21/54/55/56 SCHNEIDER 05/29/30 SEG

05/69/75/76/77/78 SELECO 05/25 SHARP 18 SIEMENS 09 SINUDYNE 05 SONY 08

31/33/66/67/69TCL TELEFUNKEN 10/11/12/13/14 TEVION 52 THOMSON 10/15/44 TOSHIBA 16/57 WHITE

WESTINGHOUSE

YAMAHA 18/41

VQT4W71

Page 22

Getting started

Auto Setup

Progress

This will take about 3 minutes.

No. Channel Name Type Quality

Free TV: 0 Pay TV: 0 Radio: 0

Searching

100%

Settings

Easy Setting

The tuner in this unit is compatible with digital Cable broadcast services and digital terrestrial broadcast services.

• In these operating instructions,

[DVB-C] : indicates features applicable to digital cable broadcasts (DVB-C).

[DVB-T] : indicates features applicable to digital terrestrial broadcasts (DVB-T).

• This unit can receive only one of the two services at a time.

1 Turn on the TV, then select the appropriate

AV input to suit the connections to this unit.

2 Press [Í] on the remote control or [Í/I] on

this unit.

• The Easy Setting will start at the initial power on.

3 Select language, then press [OK]. 4 Select country, then press [OK]. 5 Select “Digital Cable (DVB-C) Channels” or

“Digital Terrestrial (DVB-T) Channels”, then press [OK].

1 [DVB-C]

Select the channel number allocation, then press [OK].

• For Germany and Austria: Normally set to “Preset Channel

Number”.

• For Switzerland: Normally set to “Operator’s Channel Number ( LCN )”.

2 [DVB-C]

Select “Start Auto Setup”, then press [OK].

• Frequency Auto

The preset frequency will be automatically used.

Manual

Enter the frequency specified by your cable provider with number buttons.

•Network ID Auto

The preset Network ID will be automatically used.

Manual

Enter the Network ID specified by your cable provider with number buttons.

• Frequency and Network ID settings may be

necessary depending on the cable provider. For details, consult the cable provider.

6 Auto Setup will start automatically.

(This operation may take some time.)

e.g., [DVB-C]

[DVB-C]

When tuning is completed, press [OK].

• To change channel allocation, restart Auto Setup in Basic Settings menu and change channel number allocation selection. (> 86)

VQT4W71

Page 23

Getting started

7 Clock will be set automatically.

If the clock setting screen appears, set the time manually (> 99, Clock).

8 Set Quick Start to “On”, “Off” or “Timer

Setting for Quick Start”, then press [OK].

•On

It is possible to start quickly from standby mode.

•Off

Power consumption in standby mode is minimized. (> 117) However, startup time from standby mode will be longer.

• Timer Setting for Quick Start

“Quick Start” is activated when the set time comes.

9 Select the item to match the type of TV

connected. For details, refer to “TV Aspect”. (> 94)

When “Easy Setting has been completed.” appears, Easy Setting is complete.

• Select “Yes” to proceed to “Easy Network Setting”. (> 24)

• Select “No” to finish the Easy Setting.

To stop partway

Press [RETURN ].

To restart setup or change TV signal type

1 Press [FUNCTION MENU]. (> 21) 2 Select “Basic Settings” in “Setup”, then press

[OK].

3 Select “Auto Setup” in “DVB Tuning”, then

press [OK].

4 Select “Yes”, then press [OK].

• If you are asked to select the auto setup method, refer to “Auto Setup”. (> 86)

To confirm that channels have been tuned correctly

Refer to “Using Channel List”. (> 28)

• If tuning is cancelled partway through, it may not be possible to receive the channels. Restart setup again.

VQT4W71

Page 24

Getting started

RETURN

Easy Network Setting

Settings and tests for connection required for home network and the Internet will be conducted. First, please select a connection mode.

LAN cable connection: Connect a LAN cable to the unit and select “Wired”.

Wireless LAN connection: Select “Wireless”.

Current setting : Wired

Wired Wireless

e.g.,

Settings

Easy Network Setting

After completing “Easy Setting”, you can continue with “Easy Network Setting”.

1 Select “Wired” or “Wireless”, then press

[OK].

2 Follow the on-screen instructions and make

the following confirmation and settings.

“Wired” connection:

- Home Network Connection Check

- Home Network function

- Remote Recording function

- Internet Connection Test

“Wireless” connection:

• Before beginning wireless connection setup obtain your Network name (SSID).

An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.

- Wireless Settings

- Home Network Connection Check

- Home Network function

- Remote Recording function

- Internet Connection Test

3 When “Easy Network Setting is finished.”

appears. Press [OK].

Connection method to wireless access point

Search for wireless network: 1 Select “Search for wireless network”, then

press [OK].

2 The available wireless networks will be

displayed. Select your network name and press [OK].

- If your Network name is not displayed search again by pressing the red button on the remote control.

- Stealth SSID will not be displayed. Enter manually by using “Wireless Settings”. (> 84, 96)

• If your wireless network is encrypted, Encryption Key Input Screen will be displayed. Input the encryption key of your network.

WPS (PUSH button):

If your Wireless router supports WPS (PUSH button), you can easily perform the settings by pressing WPS button on it. WPS (Wi-Fi Protected Setup™) is a standard that facilitates settings relating to the connection and security of wireless LAN devices.

1 Select “WPS (PUSH button)”, then press [OK]. 2 Press WPS button or corresponding button of

Wireless router until the lamp starts flashing.

• Wi-Fi Protected Setup™-compatible Wireless router may have the mark.

• For details, refer to the operating instruction of Wireless router.

3 Press [OK].

VQT4W71

Page 25

Getting started

When you experience problems

Refer to “When you experience problems with Easy Network Setting”. (> 115)

To restart Easy Network Setting

1 Press [FUNCTION MENU]. (> 21) 2 Select “Basic Settings” in “Setup”, then press

[OK].

3 Select “Easy Network Setting” in “Network”,

then press [OK].

To redo settings individually

If “Easy Network Setting” did not work properly or when you change the settings individually, perform the following steps: 1 Press [FUNCTION MENU]. (> 21) 2 Select “Basic Settings” in “Setup”, then press

[OK].

3 Select “Network Settings” in “Network”, then

press [OK].

4 Refer to “Network Settings”. (> 96)

Check security before using Home Network function

If you set “Home Network function” to “On”, all connected devices on the same network can access this unit. Ensure that the router for your home network has adequate security system to prevent unauthorized access.

• Refer to the operating instructions of t he hub or router.

• If you set “Home Network function” or “Remo te Recording function” to “On”, the setting for “Quick Start” is fixed to “On”.

• Do not use this unit to connect to a ny wireless network for which you do not have usage rights. During automatic searches in a wireless network environment, wireless networks (SSID) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access.

• After performing network settings on this unit, the settings (encryption level, etc.) of the Wireless router might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of Wireless router.

• Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party, or the leaking of data such as personal or secret information.

VQT4W71

Page 26

Getting started

RETURN

FUNCTION MENU

Media TV Guide

Home Network

Copy VideoSetup

Timer Recording

Contents on HDD

Watch TV

Network Service

Video

Contents on HDD

Title, Photo or Music on HDD can be played.

Photo

Music

Contents on HDD

RETURN

Press

e.g.,

FUNCTION MENU screen

You can easily access the desired functions, such as playback, timer recording, the unit’s settings etc. via the FUNCTION MENU.

1 Press [FUNCTION MENU].

2 Select the item, then press [OK].

FUNCTION MENU list

•Media

-BD/DVD

- SD Card

- USB device

- USB HDD

•TV Guide (> 28)

• Timer Recording (> 37)

• Network Service (> 76)

• Contents on HDD

- Video (> 40)

-Photo (> 64)

-Music (> 68)

• Home Network

- Miracast (> 75)

- DLNA Client (> 73)

- Media Renderer (> 74)

- Wi-Fi Direct (> 75)

•Setup

- Basic Settings (> 84)

• You can change the unit’s settings of DVB Tuning, Sound, Display, Connection, Network etc.

- Remote Recording (> 38)

- Wallpaper Personalize a background of the FUNCTION MENU.

• To select from among “Photo”, register photo

in advance. (> 65)

- BD-Video Data Management (> 44)

VQT4W71

•Watch TV (> 28)

• Copy Video

- Copy Menu (> 57)

- Copy Video (AVCHD) to DVD-R (> 63)

Page 27

Watching broadcasts

Watch ing broadcasts

Watching broadcasts

Instructions for operations are generally described using the remote control. (> 12)

1 Press [INPUT SELECT] and select “TV”,

then press [OK].

• If the Operator profile is being updated, a different display may appear on the screen. (> 30)

2 Press [CH WX] to select the channel.

• You can also select the channel by the following operations.

- Using number buttons

- Using Channel List (> 28)

- Using TV Guide system (> 28)

- Using channel information (> 29)

To switch to the channel you have previously watched

Press [LAST VIEW ].

• This function will work only for the channels you have watched for more than 10 seconds.

To switch to the radio channels or to the all channels

Press [RADIO/TV].

If this unit request a PIN

Enter the PIN with the number buttons by following the on-screen instructions.

• If you decide on a PIN, make a note it in case you forgot it.

• PIN (except CAM’s) can be changed via “PIN Entry”. (> 99)

• For CAM’s PIN, refer to your CAM’s operating instructions.

If encrypted channels do not appear

To watch an encrypted broadcast, insert the CI module into the CI slot. (> 14)

• Set according to the CI module. (> 84, 95, Common Interface)

• Selection of channel is made easy by crea ting a Favourite of the channels. (> 86, Favourites Edit)

• When you are watching the 3D programme, subtitles and TV Guide, etc., may not display correctly depending on the settings. (> 47, 48, 3D Type, Signal Format)

VQT4W71

Page 28

Watching broadcasts

All DVB Channels

Select

View

RETURN

Page up

Page down

Category

123/ABC

Sorting 123...

Channel names

Encrypted channel

Page Down

Information

Page Up

Category+24 hoursTimer Rec.

TUE 01.01

TV Guide

8:00 - 9:45

TUE 01.01.2013 8:05

Category: All DVB Channels

8:00 8:30 9:00 9:30 10:00 10:30

RETURN

Watching broadcasts

Using Channel List

You can select from the list of channel names.

1 Press [OK].

• To sort the channel, press the red button.

• To change the category, press the blue button.

2 Select the channel, then press [OK].

To skip unwanted channels

The channel is skipped next time you select the channel. 1 While watching the broadcast to skip, press

[DEL].

2 Press [OK].

• You can select the skipped channel with the number buttons.

• When you want to restore the skipped cha nnel, edit the channel list. (> 84, 87, 88)

To edit the channel list

Refer to “Channel List”. (> 87, 88)

Using TV Guide system

1 Press [GUIDE].

TV Guide screen appears.

2 Select the programme, then press [OK]. 3 Select “View”, then press [OK].

Page up/down

Press [CH WX].

To view a programme list for another day

Press the green button (Previous) or the yellow button (Next).

To see programme information

Press [STATUS ].

To retrieve the programme data for the area where data have not been acquired

Select the area, then press [STATUS ].

• Some broadcasters may not send the programme data. You cannot retrieve the data from them.

To set a timer Recording using the TV Guide System

Refer to “Timer recording”. (> 36)

VQT4W71

• If you make access to Rovi Guide via Network Service , you can use an additional TV Guide which can search programmes by keywords and can display the detailed information, etc. (current as of July, 2013). (> 76)

Page 29

Watching broadcasts

HDD

71:20 DR

10:30

Now

Dolby D

Change category

All DVB Channels

NEWS 9:00 - 11:00

Set timer

10:30

Now

Dolby D

Change category

All DVB Channels

NEWS 9:00 - 11:00

Set timer





 

e.g.,

Using channel information

While watching a programme Press [STATUS ].

Channel information appears.

1 Current Category 2 Encrypted broadcast 3 Set timer (> 38) 4 Subtitle 5 Te l et ex t 6 Multiple audio/Sub Channel 7 Data service (Hybrid Broadcast Broadband

TV) (> 30)

Operations while watching broadcast

To show subtitle

When “ ” appears in channel information (> left)

Press [STTL ].

• Press again to hide subtitle.

To change subtitle language

1 Press [OPTION]. 2 Select “Subtitle Language” in “Digital TV

Menu”, then press [OK].

3 Select the desired language.

• Press [EXIT ] to exit the screen.

• Some subtitle contents can be displayed using Teletext. (> 30)

Switching audio

Press [AUDIO].

• Audio will switch according to the contents of the programme every time it is pressed.

To show detailed information

Press [STATUS ] again.

To hide the information screen

Press [EXIT ].

To change Category

Press the blue button.

• To register your favourite channels

1 Press [OPTION]. 2 Select “Digital TV Menu”, then press [OK]. 3 Select “Favourites Edit”, then press [OK]. 4 Refer to “Favourites Edit”. (> 86)

To switch between the current programme and the next programme

Press [2, 1].

To switch to another channel

Press [3, 4], then press [OK].

VQT4W71

Page 30

Watching broadcasts

To use data service (Hybrid Broadcast Broadband TV)

You can enjoy the interactive data services for digital broadcasting.

To use Hybrid Broadcast Broadband TV application, perform network connection and settings. (> 20, 24)

When notification message is displayed: Follow the on-screen instructions.

When the Teletext is included in data service:

When [TEXT ] is pressed, the Teletext of data service will be displayed.

• Operation buttons:

[3, 4, 2, 1], [OK], number buttons or colour buttons, etc.

• Operations may vary depending on the b roadcaster.

• On-screen instructions may not correspond to the remote control buttons.

• It may take some time to show the data service.

• Not all the data services are available depending on the broadcaster.

• Some functions of the data service may be deactivated during recording.

To show the Teletext

When “ ” appears in channel information (> 29)

1 Press [TEXT ].

• When the Teletext of data service is

displayed, press [TEXT ] again.

2 Use [3, 4, 2, 1], number buttons or colour

buttons, etc. according to on-screen instructions.

• You can change the display mode. (> 93, Teletext)

Aspect

You can switch the screen mode. Refer to “Switching the aspect ratio of the screen”. (> 105)

To select the contents in the broadcast

When a programme includes audio signals etc., you can select signals.

1 Press [OPTION].

2 Select “Digital TV Menu”, then press [OK].

3 Select “Multi Audio” or “Sub Channel”, then

press [OK].

4 Select the item.

About Operator profile

Depending on your CAM, the channel list can be updated to the one recommended by the CAM.

To perform an update, operate following the instructions on the screen.

• If cancelled, the notification is instead displayed on the channel information (> 29).

e.g.,

NEWS 9:00 - 11:00

Now

Dolby D

Operator Profile Info

10:30

All DVB Channels

Change category

To execute channel list upgrade, press the red button.

• Performing an update will delete the e xisting channel list. To return to the original channel list, restart “Auto Setup” in “Basic Settings” menu. (> 86)

• The timer recording programmes may be cancelled. Please confirm a timer programme. (> 39)

VQT4W71

Page 31

Watching broadcasts

8:50:55 01.01.2013

Play



8:50.50

REWIND LIVE TV/PAUSE LIVE TV

This unit temporarily saves a live TV programme you are watching with this unit’s tuner on HDD.

REWIND LIVE TV

You can rewind live TV programme to the point where temporary save has started (up to

1.5 hours).

• REWIND LIVE TV does not work when watching a programme via external input.

PAUSE LIVE TV

You can pause live TV programme and restart watching from the paused position.

1 While watching TV

REWIND LIVE TV:

Press [SLOW/SEARCH 6] to rewind.

PAUSE LIVE TV:

Press [PAUSE ;] to pause.

• The maximum amount of the temporary save is 1.5 hours.

2 When you want to resume:

Press [PLAY/a1.3 1].

• You can perform search or Quick View, etc.

• If temporary save stops (> right), playback will be performed by that point.

Display information

While pausing or rewinding a broadcast:

Press [STATUS ].

8:05 9:35

Pause





• Press [STATUS ] again.

8:50



While pausing a programme via external input:

Press [STATUS ] twice.

8:50:55 01.01.2013



Play

8:50.50



1 The time that you can rewind the live

programme.

2 The amount of time temporarily saved on

HDD.

3 The time of the current playback position.

To stop REWIND LIVE TV or PAUSE LIVE TV

1Press [STOP∫]. 2 Select “Yes”, then press [OK].

To hide the display information

Press [EXIT ].

• The unit cannot rewind and play more than 1.5 hours prior to the current time.

• Temporary save stops in the following cases:

- When switching to other channels or other screen

- When recording of the watching programme is started

- When two programmes simultaneous recording is started

- When performing PAUSE LIVE TV or REWIND LIVE TV

for more than 8 hours (This may vary depending on the HDD free space.)

• These functions do not work in the fo llowing cases:

- When the clock is not set

- When setting clock manually (Contents protected title

(Retention limit) only) (> 15)

- While recording two programmes simultaneously

- While copying

- While watching a programme being recorded

- When a radio programme is selected

- While watching an encrypted programme

- REWIND LIVE TV:

When “REWIND LIVE TV” is set to “Off” (> 90)

- PAUSE LIVE TV:

When a timer recording via external input is started while watching a programme via external input.

• PAUSE LIVE TV: You can operate this unit with the TV remote control by using VIERA Link (> 81). Refer to the TV operating instructions.

VQT4W71

Page 32

Recording

Off (DR)

Conversion Mode Setting

RETURN

HDD Remain (DR)m

High Definition

Data Size

Large

Small

Large

Small

Standard Definition

Automatic Stop at 8:45

REC1/OTR

Recording Time

Continuous recording

30 min

8:00 - 8:45

Recording TV programmes

4 Select “Automatic Stop”, then press

• This operation will only record to built-in HDD.

• This unit can record two programmes being broadcasted at the same time.

• About CI Plus restriction (> 15)

• Notes for recording of an encrypted broadcast (> 34)

1 Select the channel to record.

2 Press [REC MODE] and select the

conversion mode, then press [OK].

• This unit will record the programmes in DR mode once, and then automatically convert to the selected recording mode while this unit is in standby.

• Recording mode (> 8)

• The conversion mode set here is used

as an initial value for the next recording.

To set the recording time

1 Select “Recording Time” or “Continuous

2 Press [OK].

[OK].

• One touch recording (OTR)

Recording stops automatically when the programme ends.

• You can also select “Recording Time” or “Continuous recording”. (> below)

recording” in step 4 (> above).

Recording Time:

You can set the length of recording time from 30 minutes to 4 hours.

• You can select the recording time with

[2, 1].

Continuous recording:

The recording is continued until you press [STOP ∫].

3 Press [REC ¥].

Recording starts.

• “REC1” or “REC2” will light on the unit’s display.

VQT4W71

Page 33

Recording

REC2

HDD

REC1/OTR AUTO

Recording programme displayed on the TV

Recording programme not displayed on the TV

Stop Recording

Yes

Recording of this programme is in progress. Stop this recording ?

RETURN

Stop Recording

2 recordings are in progress. Which recording would you like to stop ?

RETURN

To convert the recording mode after recording in DR mode

Refer to “File Conversion”. (> 52)

To confirm whether the conversion is completed

Refer to “To confirm whether the conversion is completed”. (> 52)

To cancel a conversion

Refer to “To cancel a “During standby” conversion”. (> 53)

• One recording will terminate when simultaneous recording is being done and timer recording starts.

• When the programme recorded in DR mode is c onverted, teletext will not be recorded.

• Data service will not be recorded.

• Following contents or media cannot be played back while recording.

- Xvid and MKV file

- photo

- USB HDD (For data files, > 9) and USB memory

• Copying cannot be performed while recordin g.

• When “Automatic Standby after OTR” is set to “On” (> 98), this unit is turned to standby mode if this unit is not operated for approximately 5 minutes after completing “Automatic Stop” or “Recording Time”.

• When a programme is recorded in encrypted form, conversion will not start until decryption has finished. (> 34)

• The title before conversion (the title recorde d in DR mode) will be deleted once the conversion is completed.

• Conversion will take about the same time as the recorded duration.

• When the HDD does not have enough re maining space, conversion will not start.

• Conversion is stopped when this unit is turn ed on. Conversion will start from the beginning again once the unit is switched to standby mode.

• The conversion will not start if the timer recording is scheduled within the time required for the conversion.

• When converted, audio content and su btitle will be converted with the same settings as at the start of recording.

Operation during Recording

To check the recording programme

Press [STATUS ].

e.g., While recording two programmes simultaneously

To stop recording

Press [STOP ∫].

When recording one programme:

If the following screen appears

Select “Yes”, then press [OK].

When recording two programmes:

If the following screen appears

1 Select the programme, then press [OK]. 2 Select “Yes”, then press [OK].

VQT4W71

Page 34

Recording

Page

Select

OPTION

Start Time Prog.Type:

Rec Time

Play RETURN

Channel Date Title Name

Delete

Drama

9:00 0:10(DR)

04.10

29.10

Channel Date Title Name

Recording TV programmes

To pause recording

After displaying the recording programme, press [PAUSE ;].

• Press again to restart recording. (A title is not split into separate titles.)

• Timer recording programme cannot be paused.

To record two programmes simultaneously

While recording, perform steps 1–4 on page 32.

• Channel or input can only be switched be tween the recording programmes.

Simultaneous rec and play

You can play the recording title from the beginning or the titles previously recorded to the HDD.

1 Press [DIRECT NAVIGATOR].

“[” is displayed on the recording programme.

2 Select the title, then press [OK].

Notes for recording of an encrypted broadcast

This unit allows you to record/view/play an encrypted programme by decryption using a supporting CI module.

Recording of encrypted broadcast

The recording of encrypted broadcasts differs according to the “Recording for Encrypted Channel” (> 90) settings as follows.

Supporting CI

module is

inserted

Automatic Record

(Decrypted)

Decrypt Recording Encrypt Recording

Depending on the specifications of the CI

Record

(Decrypted)

Record

(Encrypted)

module, the broadcast may be recorded in the encrypted form. (> below)

2 encrypted programmes simultaneous recording/viewing/playing

Two programmes (e.g., “A” and “B”) which need the same CI module for decryption will be recorded/viewed/played as follows:

• When “Automatic” is selected

Programme “A” “B”

While recording programme “A”, start recording programme “B”. While viewing/playing programme “A”, start timer recording programme “B”. While recording programme “A”, view/play programme “B”.

Supporting CI module is not

(Encrypted)

Record

(Decrypted)

Viewing/

playing

possible

Record

(Decrypted)

inserted

Record

Recording

impossible

Record

(Encrypted)

Record

(Encrypted)

Viewing/

playing

impossible

VQT4W71

Page 35

Recording

COPY

• When “Decrypt Recording” is selected

Programme “A” “B”

While recording programme “A”, start recording programme

Record

(Decrypted)

Recording

impossible “B”. While viewing/playing

programme “A”, start timer recording programme “B”.

While recording programme “A”, view/play programme “B”.

Viewing/

playing

impossible

Record

(Decrypted)

Record

(Decrypted)

Viewing/

playing

impossible

• When “Encrypt Recording” is selected

Programme “A” “B”

While recording programme “A”, start recording programme

Record

(Encrypted)

Record

(Encrypted) “B”. While viewing/playing programme “A”, start timer recording programme “B”. While recording programme “A”, view/play programme “B”.

Viewing/

playing

possible

Record

(Encrypted)

Record

(Encrypted)

Viewing/

playing

possible

Encrypted titles

Programmes recorded in encrypted form ( ) have the following restrictions:

- The encrypted title can be played back, but it does not mean that it is decrypted and saved in the decrypted form.

- Depending on the programme, it may not be possible to play back/decrypt after recording.

- There are restrictions on the playback and editing of encrypted programmes.

- To copy an encrypted programme, decryption must be performed.

Decryption

Decryption is performed when the unit is turned off. It will take about the same time as the recorded duration.

“COPY” on the unit's display remains lighted during decryption.

It is also possible to decrypt manually

Refer to “File Decryption”. (> 53)

• To decrypt, insert the CI module into the CI slot (> 14). During decryption, do not remove the CI module from this unit.

• The title before decryption will be deleted once decryption is completed.

• When the HDD does not have enoug h remaining space, decryption will not start.

• This function is stopped when this unit is turned on. Decryption will start from the beginning again once the unit is turned off.

• The decryption will not start if the timer recording is scheduled within the time required for the decryption.

• When a decryption fails, the screen icon ( ) is changed

to “ ” or “ (Grey)”.

- : In this case, try to decrypt the title manually. (> 53)

- (Grey): When the title is copy protected (Copying is

prohibited) by CI Plus CAM, operation on the title is not possible except for deletion. In this case, delete the title.

VQT4W71

Page 36

Recording

Page Down

Information

Page Up

Category+24 hoursTimer Rec.

TUE 01.01

TV Guide

8:00 - 9:45

TUE 01.01.2013 8:05

Category: All DVB Channels

8:00 8:30 9:00 9:30 10:00 10:30

RETURN

Timer recording

• This operation will only record to built-in HDD.

• This unit can record two programmes being broadcasted at the same time.

• About CI Plus restriction (> 15)

• Notes for recording of an encrypted broadcast (> 34)

Preparation

If you want to change the recording mode: Press [REC MODE] and select the recording mode, then press [OK].

To edit the timer recording on the TV Guide screen

1 Select the programme to edit, then press the

red button. 2 Select “Timer Rec Edit”, then press [OK]. 3 Go to step 3 on page 37, “Manually

programming timer recording”.

To cancel a timer recording on the TV Guide screen

1 Select the programme to cancel, then press

the red button. 2 Select “Timer Rec Cancel”, then press [OK].

(“F” disappears)

1 Press [GUIDE].

TV Guide screen appears.

2 Select the programme, then press the

red button.

The timer icon “F” (red) is displayed.

• If on-screen instructions are displayed, follow them.

To use TV Guide system

Refer to “Using TV Guide system”. (> 28)

To select the programmes of a specific category

1 On the TV Guide screen:

Press the blue button.

2 Select the item, then press [OK].

• To return to the previous TV Guide list Select “All DVB Channels”.

Operation during Recording

Refer to “Operation during Recording”. (> 33)

• Some broadcasters may not send prog ramme information. When programme information is not displayed correctly, use manual timer recording. (> 37)

• Category may not be assigned correctly depending on the programme information.

• The receipt of the TV Guide data via Set Top Box is not possible.

• When timer recording from the external eq uipment, use manual timer recording. (> 37)

• You can set the start and finish time to make the timer recording work successfully. (> 84, 90, Timer Record Start Buffer, Timer Record Stop Buffer)

VQT4W71

Page 37

Recording

Channel Name

Schedule

Mode

Space

OK RETURN

Page Up

Page Down

Turn Timer Off

Total 0/32

Timer Recording

30:30 DRHDD TUE 01.01.2013 8:05

Delete

New Timer Programme

Info

Channel Name

Schedule

Mode

Space

Timer Recording

30:30 DRHDD TUE 01.01.2013 8:05

New Timer Programme

Programme Name

WED 02.01 8:00 - 9:00

e.g.,

Manually programming timer recording

1 Press [PROG/CHECK].

2 Select “New Timer Programme”, then press

[OK].

3 Select the items and change the items.

(> right, Timer recording options)

4 Press [OK].

The timer programme is stored.

To confirm and edit the timer programme

Refer to “To confirm and edit a timer programme”. (> 39)

Operation during Recording

Refer to “Operation during Recording”. (> 33)

• When recording from the external equipmen t, “Mode” (recording mode) is XP, SP, LP, EP or FR.

Timer recording options

Select the items and change the items.

Timer Recording TUE 01.01.2013 8:05

Channel

1 WED 02.01

Title Name

RETURN

Channel

• You can select Category/AV with the red button.

Day/Date

• You can select “Date” or “Weekly” by pressing the green button.

• Auto Renewal Recording

(Only daily/weekly timer recording) The unit will record the new programme over the old one. Press the yellow button. “Renew : ON” is displayed.

Start/Stop

• Press and hold [3, 4] to alter in 15-minute increments.

Mode/Conv.

Refer to step 2. (> 32)

Subtitles

(Only when item other than “OFF” is selected in “Conv.”)

Title Name

1 Select “Title Name”, then press [OK]. 2 Refer to “Entering text”. (> 104)

HDD

30:24 DR

Day/Date Stop

Start 8:00 9:00

Category/ AV

Date/ Weekly

Mode

DR OFF

Conv. Subtitles

OFF

VQT4W71

Page 38

Recording

10:30

Now

Dolby D

Change category

All DVB Channels

NEWS 9:00 - 11:00

Set timer

e.g.,

This unit

PC, Smartphone, etc.

Internet

Timer recording

Timer recording from channel information

You can make timer recording of the current or next programme.

1 While watching a programme

Press [STATUS ].

2 Display the channel information of a

programme to record.

• Switch the programme with [2, 1].

• Switch the channel with [3, 4].

3 Press the yellow button. 4 Go to step 3 on page 37, “Manually

programming timer recording”.

Remote recording from outside

You can set a recording from a smartphone or a PC, etc. away from home. (You must register to a service to use this function.)

For details, please check the following website. http://panasonic.jp/support/global/cs/

(This site is in English only.)

Preparation

• Network connection (> 20, 24)

• Remote Recording Function Settings (> 84

• This unit will always be connected to the Internet when this function is activated.

• Please note that a regular maintenance or unexpected trouble may interrupt the service, and that the service content may be changed or revoked and operation menu screens may be changed with or without a prior notice.

, 97)

Notes on timer recording

• You can enter up to 32 programmes within a month in advance. (Each daily or weekly programme is counted as one programme.)

• When the programme recorded in DR mode is converted, the audio content and subtitle language will be selected according to the following settings:

- “Multi Audio” of “Preferred Language” (> 88)

- “Subtitles” of “Preferred Language” (> 88)

- Audio for HG / HX / HE / HL / HM Recording

(> 93)

• When the programme recorded in DR mode is converted, teletext will not be recorded.

• Data service will not be recorded.

• (Only when recording broadcast in other than DR mode) This unit will record in the DR mode once, and then convert to the selected mode automatically during standby. If the title has not been decrypted, conversion will start after decryption.

• Even if you switch the unit to standby mode during the timer recording, the recording is continued.

• When you programme successive timer recordings to start, about last 1 minute of earlier programme will not be recorded.

• Timer recording will not start while:

- copying a title in high speed mode [with

finalising or creating Top Menu ([+RW])]

- copying a title in normal speed mode

- converting a title in “File Conversion” (Only

when “Now” is selected)

- copying HD Video (AVCHD) from USB device

or SD card

- copying photos/music

-formatting

- finalising/creating Top Menu

• When “Pure Sound mode” is activated, timer recording does not start during playback of BD-Video, DVD-Video or music CD. (> 89)

VQT4W71

Page 39

Recording

Channel Name

Schedule

Mode

Space

OK RETURN

Page Up

Page Down

Turn Timer Off

Total 3/32

Timer Recording

30:30 DRHDD TUE 01.01.2013 8:05

Delete

Info

New Timer Programme

MON 07.01

MON 07.01 10:00 - 11:50

11:00 - 11:45

11:30 - 1:00

8:00 - 10:45

MON 07.01

TUE 01.01

e.g.,

To confirm and edit a timer programme

1 Press [PROG/CHECK].

2 Select the programme, then perform the

operations.

To deactivate a timer programme

Press the red button.

• The timer icon “F” will change from red to

grey.

• Press the red button again to activate timer

recording standby. (The timer icon “F” will change to red.)

To delete a timer programme

Press [DEL].

To edit a timer programme

1 Press [OK]. 2 Change the timer recording options.

• Refer to “Timer recording options”. (> 37)

3 Press [OK].

To show programme information

Press [STATUS ].

Screen icons

Red: Timer recording standby is activated.

Grey: Timer recording standby is deactivated.

Currently recording programme

[

A part or all of the programme will not be recorded since the programme is overlapping.

The HDD is full.

Copy-protected programme It was not recorded.

The recording of the programme was not completed because of some reason.

Auto Renewal Recording is set (> 37).

Displayed if timer recording of two encrypted programmes is overlapping.

(When “Recording for Encrypted Channel” is set to “Decrypt Recording” only) A part or all of the programme will not be recorded since the encrypted programme is overlapping.

Displayed if the recording can fit in the

remaining space

Daily or weekly timer programme is set.

(Date)

It may not be possible to record because:

- there is not enough space left.

- the number of possible titles has reached its maximum. (> 120)

- programmes are deactivated, etc.

To exit the timer recording list

Press [EXIT ].

VQT4W71

Page 40

Playing back video

Time Remaining 45:54 (DR)

HDD

Page

Select Copy

Grouped Titles

DIRECT NAVIGATOR

OPTION

Start Time Prog.Type:

Rec time

Play RETURN

Social/Economic

Sport AVCHDMovieNot Viewed

Video Menu

Channel Date Title Name Titles

All

Delete

Page Up

Page Down

Movie

9:00 0:01(DR)



Playback

Last Stopped

Beginning

Where do you want to start playback from ?

RETURN

Playing titles on the HDD

“For recorded titles (> 9)” only

1 Press [FUNCTION MENU]. 2 Select “Video” in “Contents on HDD”,

then press [OK].

e.g.,

1 Tab (> 41) 2 Programme type

• [USB_HDD] When connecting registered

USB HDD, “USB HDD” tab and registration number appears. Select “USB HDD” tab.

e.g.,

Video Menu

USB-HDD

USB HDD

All

3 Select the title, then press [OK].

Playback starts.

Resume play function

If the following screen appears, select the point to start playback.

Grouped Titles DIRECT NAVIGATO

Time Remaining 45:54 (DR) Registration number 1

Not Viewed

Movie

Social/Economic

Sport

DIRECT NAVIGATOR screen

Screen icons

[ Currently recording programme

Protected title

Title was not recorded due to recording protection

Title cannot be played

(When data is damaged etc.) Title is copy protected (One

generation copy is permitted) Title requires a CAM with a playback

licence to play back.

• The number of times the title can be played back may also be limited.

Title cannot be played back when a certain time has elapsed after the recording. The icon turns grey after the

playback period has passed.

• Playback period limit can be checked in the information of that title. (> 41, Showing Information)

Title is copy restricted.

AVCHD

(Gray)

Title requires a CAM with a playback licence to play back. If a certain time has elapsed after the recording, the

title cannot be played back.

• The number of times the title can be played back may also be limited.

Encrypted title

Title has failed to be decrypted

• Press [STATUS ] to show the reason of the failure.

Title cannot be played back, edited (except deleting) or copied.

Delete the title. (> 49)

Grouped titles

Title has not yet been played

VQT4W71

Page 41

Playing back video

&

Title is recorded using a different encoding system from that of the unit.

Change the “TV System” (> 84, 94).

Radio programme

3D contents

• This icon will not display even with 3D programmes when a broadcast programme is recorded.

Recorded in 1080/50p contents

Recorded in 1080/60p contents

Title has a rating level set by the CAM.

Title is restricted by Child Lock List or Parental Rating (> 88). Recording did not complete as the timer recording has started.

Title cannot be edited (except deleting) or copied.

Tab

Titles will be categorised automatically. You can quickly find the recorded titles by selecting the tab.

To select the tab

Press [2, 1].

Showing Information

Select the title, then press [STATUS ].

Switching the appearance

1 Press [OPTION].

2 Select “Grouped Titles” or “All Titles”, then

press [OK].

Grouped Titles:

Two or more titles recorded in the daily/weekly timer recording mode are bundled and displayed as one item.

All Titles:

Displays all titles.

Playing back grouped titles

1 On the Grouped Titles screen:

Select the item marked with .

2 When playing all titles:

Press [PLAY/a1.3 1].

• This function cannot be used if the group includes a ny

encrypted title ( ).

When playing the individual title:

Press [OK] and select the title, then press [OK].

To change the displayed programme type tab

1 Select the programme type, then press the

green button.

2 Select the item, then press [OK].

VQT4W71

Page 42

Playing back video

Chapter

Title

Chapter Marks

Press OK to start playing from the selected chapter. Selected chapter can be edited via OPTION. Press RETURN to go back to previous menu.

Page 001/001

0:00.00

001

0:12.29

Play

SelectEdit Chapter Mark

RETURN

OPTION

Delete

Playing titles on the HDD

Editing the grouped titles

1 Select the title or the group, then press the

yellow button.

• A check mark is displayed. Repeat this step.

• Press the yellow button again to cancel.

• If you perform “Remove”, select the title in the group.

2 Press [OPTION].

3 Select the item, then press [OK].

Create Group:

Selected titles are bundled to form a group. Select “Create”, then press [OK].

Release Grouping:

All the titles in the group are released. Select “Release”, then press [OK].

Remove:

Selected titles are removed from the group. Select “Remove”, then press [OK].

Changing the group name

1 Select the group, then press [OPTION]. 2 Select “Edit”, then press [OK].

3 Select “Enter Title Name”, then press [OK].

4 Refer to “Entering text”. (> 104)

Playback from Chapter View

Regarding chapters

You can divide a title into multiple chapters. Each section between the division points (Chapter Marks) becomes a chapter.

• Chapter Creation

This unit can create chapters automatically while recording broadcasting. (> 90)

• If the title is recorded in the encrypted form, the chapter will be created only after the title is decrypted.

1 Select the title, then press [OPTION].

2 Select “Chapter View”, then press [OK].

e.g., [HDD]

3 Select the chapter, then press [OK].

To edit the chapter in Chapter View

Refer to “Editing chapters”. (> 54)

VQT4W71

Page 43

Playing titles on the media

Menu screen

Selecting screen for each operation is displayed when the media is inserted, and you can access

“For data files (> 9)” only

1 Insert the media.

Depending on the type of the media, play starts from the specified position, or the screen appears.

• AVCHD: If the menu screen is not displayed

Press [PLAY/a1.3 1].

2 When the DIRECT NAVIGATOR screen or

menu screen etc., appears:

Select the item or title, then press [OK].

• Repeat this step if necessary.

Playback starts.

To play back the playlist created on other equipment

1 Press [FUNCTION MENU]. 2 Select “BD / DVD” in “Media”, then press [OK]. 3 Select “Playlists”, then press [OK]. 4 Select the playlist, then press [OK].

• [BD-V] You cannot play back while recording from external

equipment. Also, playback stops when the timer recording starts from external equipment.

• Some files may not be played back, depending on the video resolution and frame rate condition.

the operation screen easily.

e.g., [USB]

• Display items differ depending on what is recorded in each media.

If the menu screen is not displayed, display it by performing the following operation.

1 While stopped

2 Select “Media”, then press [OK]. 3 Select the media, then press [OK].

Video list screen

e.g.,

Screen icons:

USB

Play Video

View Photos

Play / Copy Music ( MP3 )

Copy Video ( AVCHD )

Copy New Photos

USB device is inserted.

RETURN

Press [FUNCTION MENU].

Videos \ Video \USB

Parent Folder

Folder 01

Folder 02

video01.mkv

video02.mkv

video03.mkv

video04.mkv

OK RETURN

Page 0001 / 0003

Playing back video

Page Up

Page Down

Folder

Titles

Move to the parent folder

VQT4W71

Page 44

Playing back video

Video Menu ( AVCHD )

RETURN

Date Day

Time

Title Name

Rec time

0:30.41

Page 03/03

OPTION

Page Up

Page Down

No.

01.01 5:00 Birds

02.01 9:30 World news

03.01 10:00 Football

03.01 11:30 House dog

04.01 2:00 Hunting

05.01 11:00 Shopping

05.01 10:00 Venus

06.01 3:45 Kitten

06.01 9:00 Moon

01.01 SUN MON TUE TUE WED THU THU FRI FRI

SUN 9:00 Dogs and Cats

SD Card

001 002 003 004 005 006 007 008 009 010

Playing titles on the media

DIRECT NAVIGATOR screen

e.g.,

Video Menu

BD-RE

All

Play RETURN

All Titles DIRECT NAVIGATOR

10:30 (DR)

Time Remaining

Channel Date Title Name

Dogs and Cats

29.10 Start Time 22:46 Rec time 0:10(HM)

04.10

Birds

04.10

World news Football

29.10

OPTION

Delete

CopySelect

Page Down

Page Up

Page 003/003

DEL

Showing Information

Select the title, then press [STATUS ].

Playback from Chapter View

1 Select the title, then press [OPTION]. 2 Select “Chapter View”, then press [OK]. 3 Select the chapter, then press [OK].

• Regarding chapters Refer to “Regarding chapters”. (> 42)

Video Menu ( AVCHD ) screen

[SD]

e.g.,

Notes for BD-Live discs

[BD-V]

BD-Live allows you to enjoy more functions such as subtitles, exclusive images and online games by connecting this unit to the Internet.

Preparation

1 Perform network connection and settings.

(> 20, 24)

2 Insert a disc.

For the playback method, refer to the instructions for the disc.

Delete BD-Video data

If you no longer need BD-Live data recorded on the built-in HDD, you can delete data with the following operation.

1 Press [FUNCTION MENU].

2 Select “BD-Video Data Management” in

“Setup”, then press [OK].

3 Select “Delete BD-Video data”, then press

[OK].

4 Select “Yes”, then press [OK].

5 Select “Start”, then press [OK]. 6 Press [OK].

Showing Information

1 Select the title, then press [OPTION]. 2 Select “Information”, then press [OK].

About screen icons

Refer to “Screen icons”. (> 40)

VQT4W71

• The usable functions and the opera ting method may vary with each disc, please refer to the instructions on the disc.

• You can restrict Internet access when BD-Live functions are used (> 84, 89, BD-Live).

• When “Pure Sound mode” is set to “On”, this unit cannot use BD-Live functions. (> 89)

Page 45

Operation during play

8:05:50 01.01.2013

T1 0:05.14 DR

0:30.00

Remain HDD

Playing back video

Quick View

Press and hold [PLAY/a1.3 1].

• Press again to return to normal speed.

• Depending on the media and the type of file, some operations may not be possible.

• Depending on the media, it may take time for the menu screen, pictures, sound, etc. to start.

• Discs continue to rotate while menus are displayed. Press [STOP ∫] when you have finished playback to protect the unit’s motor, your TV screen, etc.

General operations

Status messages

Press [STATUS ] twice.

e.g.,

Stop

Press [STOP ∫].

Resume play function

Press [PLAY/a1.3 1] to restart from the stopped position.

• Discs: On ly previous stopped position is memorized. The position may be cleared if the tray is opened or the unit is switched to standby mode.

• Xvid, MKV, MP4 and MPEG2: Quick View is not effective.

• Quick View is not effective when playing back the DVD-RW disc.

• Quick View may not work when recording in XP or FR mode.

• Quick View cannot be used on encrypted titles ( ).

Press [SLOW/SEARCH 6] or [SLOW/SEARCH 5].

•Press [PLAY/a1.3 1] to restart play.

• The speed increases up to 5 steps. ([+R] [+RW]: Up to 3 steps)

• Xvid, MKV, MP4 and MPEG2: Audio is not heard during all levels search.

Pause

Press [PAUSE ;].

•Press [PLAY/a1.3 1] to restart play.

Slow-motion

While paused, press [SLOW/SEARCH 6] or [SLOW/SEARCH 5].

•Press [PLAY/a1.3 1] to restart play.

• The speed increases up to 5 steps.

• Xvid, MKV, MP4 and MPEG2: Slow-motion is not effective.

• [BD-V], AVCHD ([DVD-R] [SD]): Forward direction [SLOW/SEARCH 5] only.

• Slow-motion cannot be used on encryp ted titles ( ).

VQT4W71

Page 46

Playing back video

Operation during play

Frame-by-frame

While paused, press [2](2;) or [1](;1).

• Each press shows the next frame.

• Press and hold to change in succession forward or backward.

•Press [PLAY/a1.3 1] to restart play.

• Xvid, MKV, MP4 and MPEG2: Frame-by-frame is no t effective.

• [BD-V], AVCHD ([DVD-R] [SD]): Forward direction [1](;1) only.

• Frame-by-frame cannot be used on encrypte d titles ( ).

Manual Skip

Skip forward 1 minute:

Press [MANUAL SKIP +60s].

Skip backward 10 seconds:

Press [MANUAL SKIP -10s].

• Xvid and MKV: Manual Skip is not effective.

Skipping the specified time

1 Press [TIME SLIP]. 2 Select the time with [3, 4].

• Press and hold [3, 4] to change the time by

10-minute.

3 Press [OK].

• Play skips the specified time.

To display menu

[BD-V] [DVD-V] 1 Press [OPTION].

2 Select “Playback Menu”, then press [OK]. 3 Select “Top Menu”, “Pop-up Menu” or “Menu”,

then press [OK].

Skipping the title or chapter

Press [SKIP :] or [SKIP 9].

• [HDD] [USB_HDD] (For recorded titles, > 9): It will not skip

the title. But the title in the grouped titles will be skipped. (> 41)

• [SKIP 9] is not effective for encrypted titles ( ).

To create Chapter Marks

[HDD] [USB_HDD] (For recorded titles, > 9) [BD-RE] [BD-R] [RAM]

During the playback or pause Press [CHAPTER].

To delete the Chapter Mark

[HDD] [USB_HDD] (For recorded titles, > 9) [BD-RE] [BD-R] [RAM]

1 While paused

Press [SKIP :] or [SKIP 9] and skip to the location you want to delete.

2 Press [CHAPTER].

3 Select “Yes”, then press [OK].

• [BD-V] [DVD-V], Xvid, MKV, AVCHD, MP4 and MPEG2: [TIME SLIP] is not effective.

VQT4W71

Page 47

Playing back video

Changing audio

Press [AUDIO].

• It will switch depending on the contents recorded every time it is pressed.

Switching subtitles

[HDD] [USB_HDD] (For recorded titles, > 9) [BD-RE] [BD-R]:

1 Press [STTL ].

2 Press [OK].

3 Select “On” or “Off”, then press [OK].

• If you want to switch the subtitle language, select it in the Basic Operation menu (> 82).

[BD-V] [DVD-V], Xvid and MKV:

Display with “Subtitle Settings” in the Basic Operation menu (> 82).

• Xvid and MKV: If the subtitles text are not d isplayed correctly, try changing the language settings (> 89, Subtitle Te xt ) .

Displaying the Teletext

[HDD] [USB_HDD] (For recorded titles, > 9) [BD-RE] [BD-R]

3D video playback

Preparation

Connect 3D compatible TV to this unit. (> 16)

• Perform the necessary preparations for the TV.

Play back following the instructions displayed on the screen.

Preparatory 3D settings

Perform the following settings as necessary.

3D BD-Video Playback

It is also possible to play back 3D discs in 2D (conventional video). (> 84, 89)

3D Type

If 3D video cannot be played back in 3D, you may be able to play it in 3D by changing the setting. (> 84, 94)

3D AVCHD Output

If 2D AVCHD video is recognised as 3D video and cannot be played back correctly, you may be able to play it by changing the setting. (> 84, 94)

3D Playback Message

Hide the 3D viewing warning screen. (> 84, 94)

Press [TEXT ].

• Teletext display mode is TOP (FLOF) only.

• Some functions may not work.

• Teletext cannot be displayed when the subtitles are set to ON.

Aspect

You can switch the screen mode. Refer to “Switching the aspect ratio of the screen”. (> 105)

VQT4W71

Page 48

Playing back video

Operation during play

3D settings during playback

Change this setting when the screen is not correctly displayed for 3D compatible programmes.

1 Press [OPTION].

2 Select “Playback Settings” in “Playback

Menu”, then press [OK].

3 Select “3D Settings”, then press [OK].

4 Select the item, then press [OK].

Signal Format

- Original: Keep original picture format.

- Side by side: 3D picture format comprising of left and right screens.

-2D to 3D: Converts 2D pictures to 3D effect while playing.

3D Picture Mode

-Normal: Normal 3D effects.

-Soft: Soft 3D effects.

• This function cannot be enabled when “Signal

Format” is set to “2D to 3D”.

- Manual: 3D effects set manually (> below)

• Depending on the contents, displayed items are different.

• This unit only guarantees the playba ck of the Frame Sequential and the Side-by-Side (Half) programme types.

• Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue. In the event that you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.

• Depending on the connected TV, the video being played back might switch to 2D video due to changes in resolution etc. Check the 3D setting on the TV.

• 3D video might not output the way it is set in “HDMI Video Format” (> 94) and “24p(4K)/24p Output” (> 94).

• It may display as Side-by-Side when play back of the 3D video is started.

Manual Settings

(To change the setting, set “3D Picture Mode” to “Manual”.)

Distance

Set the amount of depth perception.

Screen Type

Selects how the screen appears during 3D playback (flat or round).

Frame Width

Set the amount of feathering at the edge of screen.

Frame Colour

Set the colour of feathering at the edge of screen.

Graphic Display Level

Adjust the 3D position for the playback menu or message screen etc. (> 83)

VQT4W71

Page 49

Deleting/Editing recorded titles

Editing vid eo

Time Remaining 45:54 (DR)

HDD

Page

Select Copy

Grouped Titles DIRECT NAVIGATOR

OPTION

Start Time Prog.Type:

Rec time

Play RETURN

Social/Economic Sport AVCHDMovieNot Viewed

Video Menu

Channel Date Title Name Titles

All

Delete

Page Up

Page Down

Movie

9:00 0:01(DR)

Start Time Prog.Type:

Rec time

Channel Date Title Name

Movie

9:00

Once deleted, divided or partially deleted, recorded content cannot be restored to its original state. Make certain before proceeding.

“For recorded titles (> 9)” only

• If the disc is protected, release the protection. (> 102, Disc Protection)

• Depending on the media and the type of file, some operations may not be possible.

• PIN is required to edit the titles with in some functions.

(> 41)

Available disc space after deleting

• [HDD] [USB_HDD] [BD-RE] [RAM]

The space deleted becomes available for recording.

• [BD-R] [DVD-R] [+R]

Available space does not increase even after the contents are deleted.

• [DVD-RW] [+RW]

Available recording space increases only when the last recorded title is deleted.

Editing video

Deleting

1 On the DIRECT NAVIGATOR screen:

Select the title.

2 Press [DEL]. 3 Select “Delete”, then press [OK].

Multiple deleting

Select the title, then press the yellow button in step 1.

A check mark is displayed. Repeat this step.

• Press the yellow button again to cancel.

Deleting during play

1 Press [DEL] while playing.

2 Select “Delete”, then press [OK].

• Even after deletion is completed, it may take time until the updated available space is displayed.

VQT4W71

Page 50

Editing video

Time Remaining 45:54 (DR)

HDD

Page

Select Copy

Grouped Titles DIRECT NAVIGATOR

OPTION

Start Time Prog.Type:

Rec time

Play RETURN

Social/Economic Sport AVCHDMovieNot Viewed

Video Menu

Channel Date Title Name Titles

All

Delete

Page Up

Page Down

Movie

9:00 0:01(DR)

Set up Protection

Cancel Protection

Partial Delete

Divide Title

File Conversion

Enter Title Name

Delete Title

Playback

Information

Chapter View

Create Group

Release Grouping

Edit

All Titles

File Decryption

Deleting/Editing recorded titles

Editing

• If the title is contents protected, you may not perform editing other than deleting. (> 15)

1 On the DIRECT NAVIGATOR screen:

Select the title.

2 Press [OPTION]. 3 Select the item, then press [OK].

e.g.,

• “Edit” has several functions.

Deleting

1 Select “Delete Title”, then press [OK].

2 Select “Delete”, then press [OK].

Entering title name

1 Select “Enter Title Name” in “Edit”, then press

[OK].

2 Refer to “Entering text”. (> 104)

Multiple editing

Select the title, then press the yellow button in step 1. A check mark is displayed. Repeat this step.

• Press the yellow button again to cancel.

VQT4W71

Page 51

Editing video

Start Time Prog.Type:

Rec time

Social/Economic

MovieNot Viewed

Channel Date Title Name

All

Movie

9:00

Setting protection

[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM] [+R] [+RW] Protection setting prevents the title from accidental deletion.

1 Select “Set up Protection” or “Cancel

Protection” in “Edit”, then press [OK].

2 Select “Yes”, then press [OK].

appears when setting the protection.

• This function cannot be used on encrypted titles ( ).

Partial deleting

[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]

1 Select “Partial Delete” in “Edit”, then press

[OK].

2 Press [OK] at the start point and end point to

delete.

• You can find the desired point by using play, search, etc. (> 45)

3 Select “Continue”, then press [OK].

• Select “Next”, then press [OK] to delete other sections. Up to 20 sections can be set. (> go to step 2)

4 Select “Delete”, then press [OK].

• Chapter Mark is generated in the scene that was partially deleted.

5 Press [RETURN ].

Dividing title

[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]

1 Select “Divide Title” in “Edit”, then press [OK].

2 Press [OK] at the point to divide the title.

• You can find the desired point by using play, search, etc. (> 45)

3 Select “Continue”, then press [OK].

4 Select “Divide”, then press [OK].

To confirm the division point

After performing step 2. Select “Preview”, then press [OK].

• The unit plays 10 seconds before and after the division point.

To change the division point

After performing step 2. Restart play and select “Divide”, then press [OK] at the division point.

• [HDD] [USB_HDD] Divided titles will become a group of titles.

• This function cannot be used on en crypted titles ( ).

• This function cannot be used on encrypted titles ( ).

VQT4W71

Page 52

Editing video

File Conversion

Convert the selected title by changing its recording mode. Please select recording mode and other options, then press OK.

RETURN

Subtitles

Off

Recording Mode

HL -- Longer Play

Timing

During standby

Deleting/Editing recorded titles

File Conversion

[HDD] [USB_HDD] File Conversion is a function to convert the recording mode of the title in DR mode and

AVCHD contents. The size of the converted title will be small regularly. It will take about the same time as the recorded duration.

1 Select “File Conversion” in “Edit”, then press

[OK].

e.g.,

2 Set the conversion options, then press [OK].

Recording Mode (> 8):

• [USB_HDD] You cannot select XP, SP, LP and

EP mode.

Subtitles:

•Automatic

Subtitles will be recorded if they are included in the title, and will not be recorded if they are not included.

•Off

Subtitle will not be recorded.

Timing:

•Now

Conversion begins immediately after step 4.

• Timer recording will not be performed during conversion.

• If an encrypted title ( ) is included, “Now” cannot be selected.

• During standby

Conversion will be performed after the unit is switched to standby mode.

3 Select the item, then press [OK].

Convert & Delete:

The original title will be deleted to save HDD capacity after conversion.

Convert Only:

The original title remains after conversion.

• The original title will be deleted after File Conversion, if the selected title is indicated

with . (> 15)

4 “Now” conversion:

Select “Start”, then press [OK].

“During standby” conversion:

Press [OK].

• Conversion will be performed after the unit is switched to standby mode.

“COPY” or “CONV” on the unit’s display remains lighted during conversion.

• If the title is encrypted ( ), conversion

will start after decryption.

To cancel a “Now” conversion

Press and hold [RETURN ] for more than 3 seconds.

To confirm whether the conversion is completed

Press [DIRECT NAVIGATOR].

e.g.,

Channel Date Title Name Titles

04.10

29.10

29.10 Start Time Prog.Type:

9:00

Movie

Rec time

0:01(DR HL)

When “±± > ±± (Recording mode for conversion)” is displayed, the conversion has not finished.

VQT4W71

Page 53

Editing video

To cancel a “During standby” conversion

After performing steps 1–3 (> 50, Editing) 1 Select “File Conversion” in “Edit”, then press

[OK].

2 Select “Yes”, then press [OK].

• To use “File Conversion”, the HDD needs enough storage capacity.

• The size of converted title might increase depending on the title.

• Teletext will not be recorded.

• File Conversion is stopped when this unit is turned on during performing “During standby” conversion. Conversion will start from the beginning again once the unit is switched to standby mode.

• When converted, the audio content an d subtitle language will be selected according to the following settings:

- “Multi Audio” of “Preferred Language” (> 88)

- “Subtitles” of “Preferred Language” (> 88)

- Audio for HG / HX / HE / HL / HM Recording (> 93)

• When converted, 3D information may not be retained.

• In titles with the Auto Renewal Recording fu nction (> 37) set, a programme may be unintentionally converted while in “During standby”.

File Decryption

[HDD]

Encrypted titles ( ) can be decrypted manually.

1 Select “File Decryption” in “Edit”, then press

[OK].

2 Select whether to delete the original title or

not, then press [OK].

•Yes

The original title will be deleted to save HDD capacity after decryption.

•No

The original title remains after decryption.

3 Select “Start”, then press [OK].

Decryption starts. “Decrypting” appears during decryption.

• When a title that is copy protected (One generation copy is permitted) is selected, the original title will be deleted after decryption. (> 15)

• When a decryption fails, the screen icon

( ) is changed to “ ”.

To cancel the decryption

Press and hold [RETURN ] for more than 3 seconds.

• For decryption, the CI module tha t supports the programme is necessary.

• Depending on the programme, playba ck/decryption may not be possible.

• During decryption, do not remove the C I module from this unit.

VQT4W71

Page 54

Editing video

Deleting/Editing recorded titles

Editing chapters

[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]

1 Select “Chapter View”, then press [OK].

2 Perform the editing operations.

Edit Chapter Mark:

Select the point where you want to start a new chapter while viewing the title.

1 Press the green button. 2 Press [OK] at the point you want to divide.

• Repeat this step.

3 Press [RETURN ] to go to Chapter View

screen.

To delete the chapter:

1 Select the chapter, then press [DEL].

Multiple editing

Select the chapter, then press the yellow button. A check mark is displayed. Repeat this step.

• Press the yellow button again to cancel.

2 Select “Delete”, then press [OK].

To combine chapters (Delete chapter mark):

1 Select the chapter, then press [OPTION]. 2 Select “Combine Chapters”, then press

[OK].

3 Select “Combine”, then press [OK].

The selected chapter is combined to the next chapter.

• The maximum number of chapters: (Depends on the state of recording.)

[HDD] [USB_HDD]: Approx. 1000 per title [BD-RE] [BD-R] [RAM]: Approx. 1000 per disc

• [HDD] [USB_HDD] When the title has the maximum number of chapters, you cannot perform the Resume play function (> 40) with the title.

• This function cannot be used on en crypted titles ( ).

Playback from Chapter View

Refer to “Playback from Chapter View”. (> 42)

VQT4W71

Page 55

Copying titles

Copying video

§1, 2, 3

§1, 3

Start Time Prog.Type:

Rec time

Channel Date Title Name

Movie

9:00

Standby status can be changed if required. Please press OK to start copying.

RETURN

Automatic Standby after Copy

Off

§1

“For recorded titles (> 9)” only

§2

The title in the source media will be deleted.

§3

The recording mode cannot be changed.

Copying video

8 Set other settings, then press [OK].

e.g.,

(> 56, Setting the copying options)

1 Insert or connect the media.

2 Press [FUNCTION MENU].

3 Select “Video” in “Contents on HDD”,

then press [OK].

4 Select the title, then press the yellow

button.

A check mark is displayed. Repeat this step.

• Press the yellow button again to cancel.

5 Press the blue button.

6 Set the copy direction, then press [OK].

7 Select “Yes”, then press [OK].

• If you select “No”, you can change the selection. (> 56, To change the selection)

9 Select “Yes”, then press [OK].

To register the external HDD (USB HDD)

Refer to “Registering the USB HDD”. (> 80)

To copy HD Video (AVCHD) to the DVD-R in High Definition

Refer to “Copying HD Video (AVCHD) to the DVD-R in High Definition”. (> 63)

Release the disc protection

Refer to “Disc Protection”. (> 102)

• Encrypted titles ( ) cannot be copied. (> 34)

• During copying, do not remove the CI module from this unit.

• If you wish to choose the audio lang uage, select the language from “Multi Audio” of “Preferred Language” before copying (> 88).

• Simultaneous operation is not possible while copying with finalising or creating Top Menu. However, the titles on the HDD can be played back while high speed copying without finalising or creating Top Menu.

VQT4W71

Page 56

Copying video

HDD

Page

Select Copy

Grouped Titles BD-RE Remain

Start Time Prog.Type:

Rec time

OK RETURN

Social/Economic

Sport AVCHDMovieNot Viewed

Copy

Channel Date Title Name Titles

All

Page Up

Page Down

Movie

9:00 0:01(DR)

90%

OPTION

Remaining space

The order of copying

Copying titles

To change the selection

1 Select “No”, then press [OK] in step 7 (> 55).

e.g., [HDD] > [BD-RE]

2 To change the selected titles:

Select the title, then press the yellow button. Repeat this step to select titles.

To change the picture quality:

[HDD] > [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW]

[+R] [+RW]

1 Select the title, then press [OPTION]. 2 Select “Conversion Select”, then press

[OK].

3 Select the picture quality, then press [OK].

Repeat steps if necessary.

Setting the copying options

1 Select the item in step 8 (> 55). 2 Press [2, 1] to change the settings.

• Automatic Standby after Copy On:

This unit is turned to standby mode when it is not operated for approximately 5 minutes after completing copy.

• Subtitles Automatic:

Subtitles will be recorded if they are included in the title.

• If you wish to choose the sub title, select the language

from “Subtitles” of “Preferred Language” before copying (> 88).

•Finalise On:

[DVD-R] [DVD-RW] [+R] The discs become play-only and you can also play them on other DVD equipment.

• Create Top Menu On:

[+RW] You can play the disc on other DVD equipment.

3 Press the blue button.

4 Go to step 7. (> 55)

Screen icons

Titles that will be copied to the disc in normal speed

Titles that cannot be copied

About screen icons on the DIRECT NAVIGATOR

Refer to “Screen icons”. (> 40)

VQT4W71

• You can perform “Finalise” or “Create Top Menu” later. (> 104)

Page 57

Copying video

Start Time Rec time

Channel Date Title Name

9:00 0:30 (D

Copy

Cancel All

Copy Direction

Copy Mode

Create List

Start Copying

HDD

High Speed

RETURN

Press OK to start copying.

BD / DVD

Copy

HDD

BD / DVD

Source

Destination

Cancel All

Copy Direction

Copy Mode

Create List

Start Copying

HDD BD / DVD

High Speed

Select the copy direction.

RETURN

Information of the copy destination

- BD-RE

- Copy restricted titles can be copied on to disc

Copying from media other than HDD with DIRECT NAVIGATOR

[BD-RE] [BD-R] [RAM] [+RW] > [HDD]

1 Insert a disc.

The menu screen appears. (> 43)

2 Select “Play Video”, then press [OK]. 3 Select the title, then press the yellow button.

A check mark is displayed. Repeat this step.

4 Press the blue button.

• To change the detailed settings for copy, refer to “Copying titles with copying list”. (> right)

Copying titles with copying list

[HDD] ,.

[HDD] >

[USB_HDD]

§1, 3

[BD-RE] [BD-R] [RAM] [+RW]

§1

“For recorded titles (> 9)” only

§2

The title in the source media will be deleted.

§3

The recording mode cannot be changed.

[USB_HDD]

[BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW]

[BD-RE] [BD-R]

> [HDD]

§1, 2, 3

1 [HDD] ,. [USB_HDD]:

1 Press [FUNCTION MENU]. 2 Select “Copy Menu” in “Copy Video”, then

press [OK].

Except “[HDD] ,. [USB_HDD]”: 1 Insert a disc.

The menu screen appears. (> 43)

2 Select “Copy”, then press [OK].

2 Set the copy direction.

1 Select “Copy Direction”, then press

[1] (right).

2 Set “Source” and “Destination”. 3 Press [2].

5 Select “Start Copying”, then press [OK]. 6 Select “Yes”, then press [OK].

3 Set the recording mode (> 8).

1 Select “Copy Mode”, then press

[1] (right).

2 Set “Recording Mode”. 3 Press [2].

VQT4W71

Page 58

Copying video

Page 01/01

Size:

Destination Capacity:

No. Size

New item (Total=0)

Title

( 0% )

0 MB

3200 MB

Copying titles

4 Register titles for copy.

1 Select “Create List”, then press

[1] (right).

2 Select “New item”, then press [OK]. 3 Select the title, then press the yellow

button. Repeat this step to select titles.

e.g., [HDD]

Create List Grouped Titles

HDD

Time Rec time

Size 1360 MB

RETURN

• To change the appearance of the list or show information of the title

1 Press [OPTION]. 2 Select the item, then press [OK].

• Th e titles will be copied in the order of the copying list. If you want to specify the order, edit the copying list after the titles are selected. (> 59, Editing the copying list)

4 Press [OK]. 5 Press [2].

Data size of each registered title

9:00

0:30 (DR)

OPTION

Date Channel

01.01

02.01

03.01

04.01

05.01

06.01

Time

9:00

15:00

9:30 10:00 18:30

2:00 11:0 0 15:00

3:45

9:00

Page

Select

Size:

Data size recorded to the copy destination

001/003

Title Name

Page Up

Page Down

5 Make other settings.

1 Select “Other Settings”, then press

[1] (right).

e.g.,

Copy

Cancel All

Copy Direction

HDD BD / DVD

Copy Mode

Create List

Titles

1 1 1 1 1 1 1 1 1 1

Other Settings

Start Copying

RETURN

• This screen does not appear depending on the copying mode. (> go to step 6)

Press OK to change the setting.

Subtitles

Finalise

Off

2 Select the copying option, then press

[OK]. (> 56, Setting the copying options)

3 Select the item, then press [OK]. 4 Press [2].

6 Select “Start Copying”, then press [OK]. 7 Select “Yes”, then press [OK].

To cancel all registered copying settings and lists

After performing step 1 1 Select “Cancel All”, then press [OK]. 2 Select “Yes”, then press [OK].

• Encrypted titles ( ) cannot be copied. (> 34)

• If you wish to choose the audio lang uage and subtitle language, select the language from “Multi Audio” of “Preferred Language” before copying (> 88).

• Titles in the grouped titles and other titles cannot be registered simultaneously.

VQT4W71

Page 59

Copying video

Editing the copying list

1 Select the title after step 4-4 (> 58).

Copy

Cancel All

Copy Direction

HDD BD / DVD

Copy Mode

Create List

Other Settings

Start Copying

RETURN

OPTION

Create copy list.

Destination Capacity:

Size:

No. Size

0:30 DR (25%)

New item (Total=2)

Page 01/01

2:00

( 50% )

1:00

Title

2 Press [OPTION].

3 Select the item, then press [OK].

Delete All:

All titles that you registered to copy are deleted.

Select “Yes”, then press [OK].

Add:

Add new items to the copying list. 1 Select the titles with the yellow button. 2 Press [OK].

Delete:

Selected titles are deleted.

• Select the title, then press the yellow button before step 2. Repeat this step to select titles.

Select “Yes”, then press [OK].

Screen icons

Titles that cannot be copied in high speed mode

Titles that cannot be copied

Title contains photos

• Photos cannot be copied.

(NTSC)

(PAL)

Title recorded using a different encoding system from that of the unit.

• Titles displaying these marks cannot be selected.

About other screen icons

Refer to “Screen icons”. (> 40)

Move:

Change the order of items on the copying list.

• Select the title to move before step 2. Select the destination, then press [OK].

• When copying at normal speed, the total data size will change according to the recording mode.

• The total data size shown may be larger than the sum of the data sizes for each registered item.

VQT4W71

Page 60

Copying video

Copying titles

Notes for copying

Notes for high speed copy

High Speed Copying is the process of copying a title to disc in high speed while maintaining the original record mode and recording length. If any conversion is required during the copy process, the copying will be done at normal speed.

• The following recording mode and media combinations support high speed copying.

Original title’s

recording mode

DR HG HX HE

XP SP LP EP FR

• Converting the recording mode will result in a normal speed copy.

• High speed copy is possible only when there is enough recording capacity on the destination media.

Media

DVD-RAM only

Notes for normal speed copy

• [DVD-R] [DVD-RW] [+R] [+RW] You cannot copy to

the disc in the following cases.

- When there is not enough free space on the HDD.

- When the number of titles recorded to the HDD and the number of titles to be copied to the disc is greater than 999 in total.

• Copying will continue up to the point cancelled.

- [DVD-R] [DVD-RW] [+ R] [+RW] If copy is cancelled during the step while temporarily copying to the HDD, then nothing will be copied.

- [BD-R] [DVD-R] [DVD-RW] [+R] [+RW] Even if the title was not copied to the disc, the amount of remaining writable disc space becomes less.

• When copying title recorded in 1080/50p or 1080/60p, it cannot copy in progressive.

Notes for copying

You cannot copy the following titles.

- [USB_HDD] Protected titles

- [USB_HDD] HD Video (AVCHD)

- [RAM] Radio programme

• It is impossible to copy at high speed in the following cases:

- [HDD] > [BD-RE] [BD-R] :

• Copying radio programmes

- [HDD] > [DVD-R] [DVD-RW] [+R] [+RW] :

• Titles that contain many deleted segments

- [HDD] > [+R] [+RW] :

• Titles recorded in “EP” mode and “FR (recordings 5 hours or longer)” mode

• Titles recorded in 16:9 aspect

- [HDD] > [DVD-R] [DVD-RW] :

• Titles recorded via AV input in 16:9 aspect using “EP” mode or “FR (recordings 5 hours or longer)” mode

VQT4W71

Page 61

Copying video

Notes for copying 3D programmes

• It may not display correctly in 3D when a copied 3D programme is played back. In such a case, change the “Signal Format” during the playback of the title. (> 48)

• 3D information may not be copied.

• If you want to copy 3D AVCHD video to the disc in 3D, use BD-R or BD-RE and copying speed must be high speed.

About maintaining the chapter mark

• The position of the chapter might shift slightly.

• Maximum number of chapters on the disc is limited.

- [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] :

Approx. 1000

- [+R] [+RW] : Approx. 254

(Depends on the state of recording.)

Copying a finalised disc

[DVD-V] > [HDD] While playing a disc, the content being played is copied to the HDD according to the set time.

1 Press [FUNCTION MENU]. 2 Select “Copy Menu” in “Copy Video”, then

press [OK].

3 Set “Copy Mode”.

1 Select “Copy Mode”, then press

[1] (right).

2 Press [OK], then select the recording

mode (XP/SP/LP/EP).

3 Press [2].

4 Set “Copy Time”.

1 Select “Copy Time”, then press

[1] (right).

2 Select “Time Setting”, then press [OK]. 3 Select “On” or “Off”.

On:

Set the copying time.

• Set a few minutes longer than the source title, in order to include the operation time before play begins.

Off:

Copying all the content on the disc.

4 Press [2].

5 Select “Start Copying”, then press [OK].

VQT4W71

Page 62

Copying video

01/02

01 Mouse

Cattle

Tiger Rabbit

Copying titles

6 Select “Yes”, then press [OK].

• When the Top Menu is displayed: Select the title you want to start copying, then press [OK].

After the last title on the disc has finished playing the Top Menu is recorded until the set time is reached.

To stop copying

Press [STOP ∫].

• You can also press and hold [RETURN ] for 3 seconds.

• If stopped partway, copying will be up to that point.

• Operations and on-screen displays during c opy are also recorded.

• Almost all DVD-Video on sale have been treated to prevent illegal copying, and cannot be copied.

• If play does not begin automatically press [PLAY/a1.3 1] to start.

Copying Title Playing

[HDD] > [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R]

[+RW]

1 Play back the title to copy.

• Multiple audio, subtitle and Teletext displayed during playback will be copied.

- Select the multiple audio with “Multi

Audio” in the Basic Operation menu (> 82)

- Select the subtitles with “Subtitle

Language” in the Basic Operation menu. (> 82)

2 Press [OPTION]. 3 Select “Copy Title Playing”, then press [OK]. 4 Select “Start”, then press [OK].

Copying will start from the beginning of the title regardless of the playing position.

To stop copying

Press and hold [RETURN ] for 3 seconds.

• Encrypted titles ( ) cannot be copied.

• You can record to or play HDD while high speed copying. Press [OK] to exit the screen display.

• Press [STATUS ] to confirm the current progress.

VQT4W71

• Speed and recording mode when copying

The high speed copy is performed if available. Refer to “Notes for copying”. (> 60)

• [BD-RE] [BD-R] When copying the titles in DR, HG, HX, HE,

HL or HM modes and the copy destination does not have enough space, one from HG, HX, HE, HL or HM modes will be selected to match the available space.

• [RAM] [DVD-R] [DVD-RW] [+R] [+RW] When copying the titles

in DR, HG, HX, HE, HL or HM modes, copy will be performed at normal speed in FR mode.

• When copying the titles in XP, SP, LP, EP or FR modes

and the copy destination does not have enough space, copy will be performed at normal speed in FR mode.

Page 63

Copying HD Video (AVCHD) to the DVD-R in High Definition

You can copy HD Video (AVCHD) recorded on HDD to a DVD-R in High Definition quality.

[HDD] > [DVD-R]

1 Insert an unformatted DVD-R or DVD-R DL.

The menu screen appears. (> 43)

2 Select “Copy Video ( AVCHD ) to Disc”, then

press [OK].

3 Go to step 4 on page 58, “Copying titles with

copying list”.

To copy HD Video (AVCHD) from other equipment

Refer to “Copying the HD Video (AVCHD)”. (> 78)

• This function can only be used for unformatted disc.

• When a disc is named, formatting will be auto matically performed. Therefore, do not name a disc before this operation. (> 102, Disc Name)

• Discs will be automatically finalised after copy.

• The following HD Videos (AVCHD) cannot be copied to the disc in high definition.

- Exceeding 18 Mbps

- 1080/50p or 1080/60p

- Without the AVCHD information (video recorded with

certain non-Panasonic equipment, video copied to the HDD after copying it to BD-R or BD-RE once, etc.)

• 3D video will become 2D.

Copying video

VQT4W71

Page 64

Photo and Music

§2 §3§1

HDD

Page

SelectSlideshow

Calendar

OPTION

03.01.2012

29.10.2012

25.02.2013

15.03.2013

0002/0002

Copy

OK RETURN

Photo Menu

All

Page Up

Page Down

Ta b

HDD

Page

SelectSlideshow

Calendar

OPTION

03.01.2012

29.10.2012

25.02.2013

15.03.2013

0002/0002

Copy

OK RETURN

Photo Menu

All

Page Up

Page Down

e.g., [HDD]

Playing photos

§1

“For data files (> 9)” only (JPEG, MPO)

§2

[BD-RE] only

§3

[RAM] [DVD-R] only

• In order to play back 3D photo (MPO), this unit should be connected to a Full HD 3D compatible TV.

1 [HDD]

1 Press [FUNCTION MENU]. 2 Select “Photo” in “Contents on HDD”,

then press [OK].

[USB_HDD] [BD-RE] [RAM] [DVD-R] [CD] [SD] [USB]

1 Insert or connect the media.

The menu screen appears. (> 43)

2 Select “View Photos”, then press

[OK].

2 Select the folder, then press [OK].

e.g., [HDD]

To exit the Calendar screen

Press [PAUSE ;].

• When there are many files and/or folde rs, some files may not be displayed or not be playable. (> 120)

Photo Menu screen

Folder

• Photos imported to the HDD (> 67) are managed using folders. Folders and photos can be edited by pressing [OPTION]. (> 66)

Screen icons

(Tab)

3D photos (MPO) are automatically sorted. Select from this tab to play back in 3D. (It will play back in 2D when selected from other tabs.)

• To select the tab

Press [2, 1].

• Start Slideshow

Refer to “Slideshow settings”. (> 65)

• Switching to the Calendar screen

Press [PAUSE ;].

3 Select the photo, then press [OK].

•Press [2, 1] to display the previous or

next photo.

VQT4W71

Photo protected

New photo which is stored and not viewed

Page 65

Photo and Music

Slideshow

RETURN

Start Slideshow

Interval

Transition Effect

Repeat Play

Normal

Fade

Music Selection

No background music

Background Music

No List

Random BGM

Off

Photo play option

1 While displaying a photo:

Press [OPTION].

2 Select the item, then press [OK].

Aspect

You can switch the screen mode. (> 105)

Graphic Display Level

You can change the 3D position of the screen display, etc., during the 3D photo playback.

Photo Menu

•Start Slideshow

You can start a slideshow.

• Rotate RIGHT/Rotate LEFT

e.g.,

• The information of the rotated photos will not be stored depending on the media.

• This function is not available during the 3D photo playback.

• Information

Information (shooting date etc.) is shown.

• Wallpaper

A photo being played back is registered as wallpaper on the FUNCTION MENU screen. (> 26)

Slideshow settings

1 On the Photo Menu screen:

Press the green button.

2 Select the item, then press [OK].

Start Slideshow

You can start a slideshow.

Interval

You can set up the time until the next photo is to display.

Transition Effect

Effect for the next photo to display can be set.

Repeat Play

You can set up to play back repeatedly.

Music Selection

You can select background music on (either from HDD or USB) or off.

Background Music

You can select background music from HDD (My Favourites or Playlists) or USB (Folder).

Random BGM

You can play back the BGM (Background Music) in random order.

This function is not available during the 3D photo playback.

To pause the Slideshow

Press [PAUSE ;].

•Press [PAUSE;] again to restart.

To stop the Slideshow

Press [RETURN ].

VQT4W71

Page 66

Photo and Music

§1 §2

e.g., [HDD]

HDD

Page

SelectSlideshow

Calendar

OPTION

03.01.2012

29.10.2012

25.02.2013

15.03.2013

0002/0002

Copy

OK RETURN

Photo Menu

All

Page Up

Page Down

Editing photos

§1

[BD-RE] only

§2

[RAM] only

3 Select the item, then press [OK].

Enter Folder Name

Refer to “Entering text”. (> 104)

1 On the Photo Menu screen:

To edit the folder:

Select the folder.

To edit the photo:

1 Select the folder, then press [OK].

2 Select the photo to edit.

• To select multiple folders or photos

Press the yellow button when selecting the folder or photo. A check mark is displayed. Repeat this step.

• Press the yellow button again to cancel.

2 Press [OPTION].

• Selectable items will change depending on the media and the type of file.

Combine Folders

[HDD]

Select “Yes”, then press [OK].

Delete Folder

Select “Yes”, then press [OK].

Move Photos

[HDD]

Select “Move to new folder” or “Move to another folder”, then press [OK].

• If “Move to another folder” is selected, set a destination folder.

Delete Photos

Select “Yes”, then press [OK].

Set up Protection

[BD-RE] [RAM] [SD] Select “Yes”, then press [OK].

appears when the protection is set.

• Even if the protection is set, the photo may be deleted by another unit.

Cancel Protection

[BD-RE] [RAM] [SD] Select “Yes”, then press [OK].

VQT4W71

Photos For Music

[HDD]

Select “Yes”, then press [OK].

Page 67

Copying photos

§2 §3§1

Yes No

Start copying ?

Copy New Photos

RETURN

HDDSD card

Photo and Music

Copying automatically

§1

“For data files (> 9)” only (JPEG, MPO)

§2

[BD-RE] only

§3

[RAM] [DVD-R] only

Selecting and copying the photos

[HDD] > [BD-RE] [RAM] [SD]

[BD-RE] [RAM] [DVD-R] [CD] > [HDD] [SD]

[USB_HDD] [SD] [USB] > [HDD] [BD-RE] [RAM]

1 On the Photo Menu screen:

To copy the folder:

Select the folder, then press the blue button.

To copy the photo: 1 Select the folder, then press [OK].

2 Select the photos to copy, then press the

blue button.

• To select multiple folders or photos

Press the yellow button when selecting the folder or photo. A check mark is displayed. Repeat this step.

• Press the yellow button again to cancel.

2 Select the copying destination, then press

[OK].

3 Select “Yes”, then press [OK].

Copying starts.

[USB_HDD] [BD-RE] [RAM] [DVD-R] [CD] [SD] [USB]

> [HDD]

Newly added photos will automatically be copied to the HDD.

1 Insert the media.

The menu screen appears. (> 43)

2 Select “Copy New Photos”, then press [OK].

e.g., [SD]

3 Select “Yes”, then press [OK].

Copying starts.

4 Once the copy is completed, select “Yes” or

“No”, then press [OK].

To stop copying

Press and hold [RETURN ] for 3 seconds.

• Photos without shooting date will be c ategorised using the creation date.

• If the space on the destination drive runs out or the n umber of files/folders to be copied exceeds the maximum (> 120), copying will stop partway through.

• The name of the copied photos will be changed.

To stop copying

Press and hold [RETURN ] for 3 seconds.

• The name of the copied photos will be ch anged.

• If the number of files/folders to be copied exceeds the maximum (> 120), copying will stop partway through.

VQT4W71

Page 68

Photo and Music

§1 §2

Music Menu

No.

Track Name

Track List

0001 0002 0003 0004 0005

CD ( MP3 )

e.g., [CD] (MP3)

Playing music

§1

“For data files (> 9)” only (MP3)

§2

[DVD-R] only

Music CD:

Insert the disc.

Playback will automatically start.

MP3:

1 Insert or connect the media.

The menu screen appears. (> 43)

• [DVD-R] [CD] Playback will automatically

start if only MP3 is recorded.

2 Select “Play / Copy Music ( MP3 )”, then

press [OK].

Playback will start.

• Using the tree screen to find a folder 1 Press [OPTION]. 2 Select “Select Folder”, then press [OK]. 3 Select the folder, then press [OK].

To play other music (track)

Select the item, then press [OK].

Copying music (MP3) to HDD

[USB_HDD] [DVD-R] [CD] [USB] > [HDD]

After performing steps 1–2 (> left)

1 Press the blue button. 2 Select “Copy”, then press [OK].

To stop copying

Press and hold [RETURN ] for 3 seconds.

• While copying, no other operations can be performed. Timer recordings will not proceed.

• All tracks in the folder will be copied.

• Tracks recorded to HDD in one operation will be regarded as one album.

• The track/artist name will be displayed if the in formation is contained in ID3 tag of the MP3 file.

• If there is a large amount of photo data etc. within a MP3 file, play may not be possible.

VQT4W71

Page 69

Photo and Music

Music Menu

RETURN

Please select to access music.

Artists

Frequently Played

Albums

Total Tracks 53

HDD

Random Play

My Favourites

OPTION

Playlists

Playing music recorded on HDD

[HDD]

1 Press [FUNCTION MENU]. 2 Select “Music” in “Contents on HDD”, then

press [OK].

3 Select the item, then press [OK].

Artists

1 Press [2, 1] to select the initial of the

artist.

2 Select the name of the artist, then press

[OK]. 3 Select the album, then press [OK]. 4 Select the track, then press [OK].

Albums

1 Press [2, 1] to select the initial of the

album. 2 Select the album, then press [OK]. 3 Select the track, then press [OK].

Playlists

1 Select the playlist, then press [OK]. 2 Select the track, then press [OK].

Frequently Played

Tracks most often played recently (up to 30 tracks).

Select the track, then press [OK].

Random Play

Random playback of all tracks.

Playback starts.

Showing Track Information

On the track list screen:

1 Select the track, then press [OPTION].

2 Select “Information”, then press [OK].

My Favourites

Tracks registered in “My Favourites”.

Select the track, then press [OK].

• Registering a track to the “My Favourites”.

(Up to 99 tracks) While the track list screen is displayed: Select the track, then press the green button.

VQT4W71

Page 70

Photo and Music

Pleaseselectimageorphotofoldertobedisplayedduringscreensaver.

RETURN

Setting for Screen Saver

Original Image

Screen Saver Photo Folder

Playing music

Operations during music play

[HDD] [USB_HDD] [DVD-R] [CD] [USB]

Stop

Press [STOP ∫].

Pause

Press [PAUSE ;].

•Press [PLAY/a1.3 1] to restart play.

Press [SLOW/SEARCH 6] or [SLOW/SEARCH 5].

•Press [PLAY/a1.3 1] to restart play.

Skip

Press [SKIP :] or [SKIP 9].

Repeat Play/Random

Refer to “Repeat Play” or “Random” in Basic Operation menu (> 82).

Displaying photos (Screen Saver)

Photos can be displayed during music playback.

While playing the music Press the red button.

• To select the photos to display The original photo stored in the HDD by default or a folder registered with “Photos For Music” (> 66) can be selected. (3D photos in the folder are played back in 2D.)

1 While screen saver is displayed

Press [OPTION].

2 Select “Setting for Screen Saver”, then press

[OK].

3 Select the item, then press [OK].

e.g.,

To end the screen saver

Press [RETURN ].

Sound Effects

Refer to “Sound Effects” in Sound Settings menu (> 83).

VQT4W71

To play music continuously even if the Power off link works

Refer to “Playing music continuously even after turning off power to the TV”. (> 81)

Page 71

Editing music/playlist

Music Menu

RETURN

Please select to access music.

Artists

Frequently Played

Albums

Total Tracks 53

HDD

Random Play

My Favourites

OPTION

Playlists

Add to Playlist

Edit Album Name

Playback Settings

Delete Album

1 On the Music Menu screen:

Press [OPTION].

e.g.,

Photo and Music

Delete All Tracks

1 If the confirmation screen appears:

Select “Yes”, then press [OK].

2 Select “Delete”, then press [OK].

Delete Album

Select “Delete”, then press [OK].

Delete

Select “Delete”, then press [OK].

2 Select the item, then press [OK].

e.g., while selecting an Album

• Editing operations will change depending on the screen.

Edit Album Name/Edit Track Name/Edit Artist Name/Edit Playlist Name

Refer to “Entering text” on page 104.

Remove All Tracks

Select “Remove”, then press [OK].

• Tracks themselves are not deleted from the HDD.

Clear My Favourites/Clear Frequently Played

Select “Clear”, then press [OK].

• Tracks themselves are not deleted from the HDD.

Remove

Select “Remove”, then press [OK].

• Tracks themselves are not deleted from the HDD.

Add to Playlist

You can register your favourite albums and tracks into 10 preset playlists.

Select the playlist, then press [OK].

• New playlist cannot be added.

• Up to 999 tracks can be registered to each playlist.

VQT4W71

Page 72

Network

This unit (Server)

DLNA compatible

equipment (Client)

Smart Home Networking (DLNA)

Smart Home Networking (DLNA) allows you to watch the contents and broadcasts on Server equipment connected on the same network from Client equipment. This unit can be used both as Server and Client. Additionally, if used as Client, this unit can also be used as Media Renderer, which can be controlled by a Smartphone, etc.

Preparation

• Network connection (> 20, 24)

• Perform Home Network settings of the DLNA compatible equipment.

Using this unit as Server

You can watch broadcasts received by this unit (Multiroom TV Streaming), videos and photos saved on HDD of this unit on DLNA (Client) compatible equipment.

For more details, refer to the following website and the operating instructions for each item of equipment.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

• Some video or broadcasts cannot be enjoyed depending on the DLNA (Client) compatible equipment, the condition of this unit, or the file type.

• Ensure that the router for your home network has adequate security system to prevent unauthorized access.

For details regarding the connection and operation of equipment connected via a network, refer to their respective operating instructions.

DLNA function compatible software should be installed.

Preparation

• When DLNA (Server) Function is deactivated, make the settings. (> 84, 97, Home Network Settings)

1 Operate the playback equipment (Client) to

display the list of contents on this unit.

• Refer to their respective operating instructions.

2 Select the item, then press [OK].

• The titles with access restriction (e.g., cop y restriction) signals sent from broadcasters are not available for this function.

• You cannot play back music from the playback equipment (Client).

• The DLNA compatible device that is to be connected to the unit should be connected to the same hub or broadband router as the unit.

• Files not on the HDD cannot be played back.

• Playing back 3D video recorded on this unit may not work properly.

• 3D photos copied to this unit canno t be played back in 3D.

• Editing is not possible.

VQT4W71

Page 73

Network

This unit (Client)

DLNA compatible

equipment (Server)

Using this unit as Client

You can share videos, photos and music stored in the DLNA Certified media server (such as a PC with Windows 7 installed etc.).

1 Press [FUNCTION MENU]. 2 Select “DLNA Client” in “Home Network”,

then press [OK]. A list of equipment connected via the network is displayed.

• This list can be updated by pressing the red button.

3 Select the equipment, then press [OK]. 4 Select the item, then press [OK].

• Menu structure will be different depending on the equipment. Select the contents by repeating the operation.

• Convenient functions can be used by pressing [OPTION] depending on the contents.

• Control Panel

Control Panel is displayed once the playback starts. Operation can be performed with [3, 4, 2, 1], [OK] and [EXIT ].

• Press [OK] if the Control Panel is not

displayed.

• (While paying video or photo) Press

[RETURN ] to hide the Control Panel.

• You may not be able to use the Control Panel even if you use the Panasonic DLNA compatible equipment.

• Depending on the contents and the connected equipment, playback may not be possible.

• Playlist of Windows Media contents that are stored in the libraries.

• While playing back the 3D programme, yo u cannot set “3D Settings”. (> 48)

• Items displayed in grey on the display c annot be played back by this unit.

• Depending on the performance of the connected PC, video frames may be dropped during playback, or video may not be played back at all. (> 112)

Player can play back only the

VQT4W71

Page 74

Network

This unit

(Media Renderer)

Server

Controller

Server

This unit

(Media Renderer)

Smart Home Networking (DLNA)

Playable contents

When this unit works as a DLNA client, following contents are playable.

Video

§1

Video

codec

MPEG2

MPEG2 H.264

H.264

.mpo

Audio codec

Dolby Linear PCM

MPEG HE-AAC Dolby

Dolby

Dolby Linear PCM

Dolby

MP3 Dolby PCM Vorbis FLAC

Digital

Container

Recorded programmes (XP/SP/LP/

EP/FR)

Recorded programmes (DR/HG/HX/ HE/HL/HM)

§1

AVCHD

MP4 H.264 AAC .mp4

MPEG2 MPEG2

Xvid H.264 MP3

MKV H.264 AAC-LC

§1

Only when the server is another DIGA.

Photo

Format Example of file extension

JPEG .jpg

§2

MPO

§2

2D playback only.

Audio

Audio codec Example of file extension

MP3 .mp3

WAV .wav

AAC .m4a

WMA .wma

FLAC .flac

Linear PCM –

• Depending on the server, the contents other than stated above can be played back.

VQT4W71

Example of

file

extension

.mpg .mpeg

.m2ts .ts

.mts

.mpg .mpeg

.avi

.mkv

Using this unit as Media Renderer

This unit will work as Media Renderer, which allows you to play back the contents on DLNA Server by operating a Digital Media Controller (a smartphone, etc.).

Possible applications:

Digital Media Controller compatible software should be installed.

Following steps are necessary to use this unit as Media Renderer.

1 Press [FUNCTION MENU]. 2 Select “Media Renderer” in “Home Network”,

then press [OK].

3 Operate the Digital Media Controller

compatible equipment.

To exit from Home Network ( Media Renderer ) screen

Press [RETURN ].

• Depending on the contents and the connected equipment, playback may not be possible.

• Items displayed in grey on the display c annot be played back by this unit.

• This unit can be played back via connected equipment only when controlled using Digital Media Controller.

• Depending on the performance of the connected PC, video frames may be dropped during playback, or video may not be played back at all. (> 112)

Page 75

Network

Wi-Fi Direct compatible equipment

This unit

Connecting temporarily

Wi-Fi Direct Connection

Device not found. To connect with a Wi-Fi Direct compatible device, please check connection mode of pairing device and select “Search again”.

To connect with a Wi-Fi Direct incompatible device, please select “Next”.

Search again

Wi-Fi Direct Connection

Please select connection method. Press RED button to change the wireless type of connection with the pairing device. Press RETURN to finish.

Current Wireless type :

Wireless type

802.11n/g/b (2.4GHz)

RETURN

WPS (PUSH button)

Manual setting

WPS (PIN code)

Miracast compatible equipment

This unit

Using Smart Home Networking (DLNA) with Wi-Fi Direct

Wi-Fi Direct is a standard that enables wireless LAN devices to communicate each other directly without a wireless broadband router. This unit can be connected wirelessly and directly to other DLNA compatible equipment on a temporary basis, regardless of the network connection and settings of this unit.

1 Press [FUNCTION MENU].

2 Select “Wi-Fi Direct” in “Home Network”,

then press [OK].

3 Select the item, then press [OK].

• Set up the device to be connected so that a Wi-Fi Direct connection can be made. For details, refer to the operating instructions for the device to be connected.

4 Select the device to be connected, then

press [OK].

• If the device you want to connect to is not displayed, switch the connection method by pressing the green button.

5 When selected “DLNA Client”:

Go to step 4 on page 73.

When selected “DLNA Server”:

Operate the playback equipment (Client).

When selected “Media Renderer”:

Operate the Digital Media Controller.

When no devices are found

If the corresponding device is not found even after the search is run again, select “Next” and change the connection method.

Select the connection method according to the device to be connected.

Using Miracast

You can enjoy the content you are viewing on a Miracast-compatible smartphone, etc. on the big screen of your TV.

• Compatible with Android

device, ver. 4.2 and above and Miracast certified. For information on whether the smartphone, etc. supports Miracast, contact the manufacturer of the device.

1 Press [FUNCTION MENU]. 2 Select “Miracast” in “Home Network”, then

press [OK].

3 Operate the Miracast compatible equipment.

To exit from Miracast

Press [EXIT ].

VQT4W71

Page 76

Network

BACK

Featured Videos

XXXXXX

Communication Camera TY-CC20W or TY-CC10W

This unit’s rear panel

e.g.,

Enjoying Network Service

Network Service allows you to access some specific websites supported by Panasonic, and enjoy Internet contents such as photos, videos, etc. from Network Service home screen.

e.g.,

1 Press [INTERNET].

2 Select the item, then press [OK].

The message is displayed. Please read it carefully and then press [OK].

• The video communication service can be accessed directly by pressing [ ] button.

• Operable buttons: [3, 4, 2, 1], [OK], [RETURN ], colour buttons and number buttons.

Network Service home screen

• Images are for illustration purpose, contents may change without notice.

Preparation

• Network connection (> 20, 24)

To enjoy video communication (e.g., SkypeTM)

• Connect this unit with optional Communication Camera (TY-CC20W or TY-CC10W). Depending on the area, this optional camera may not be available. Please consult your local Panasonic dealer for advice.

• For operating method refer to the following website. http://panasonic.jp/support/global/cs/ (This site is in English only.)

• When this unit receives incoming call etc., “NEW MESSAGE” appear on the unit’s display.

• Cannot be used while recording, copying, playing BD-Video or performing Wi-Fi Direct.

To exit

Press [EXIT ].

• Some features of websites may not be available on this unit's web browser.

• In the following cases, settings are possible using “Network Service Settings” (> 84, 96)

- When restricting the use of Network Service.

- When the audio is distorted.

• If using slow Internet connection, the video may not be displayed correctly. A high-speed Internet service with a speed of at least 6 Mbps is recommended.

• Be sure to update the software (firmware) when a software (firmware) update notice is displayed on the screen. If the software (firmware) is not updated, you will not be able to use the Network Service function.

• The services through Network Service are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services.

• All features of websites or content of the service may not be available.

• Some contents may be inappropriate for some viewers.

• Some contents of Network Service may only be available for specific countries and may be presented in specific languages.

• If timer recording starts, Network Service will stop.

VQT4W71

Page 77

Recording from external equipment

With Other Equipment

Amplifier/receiver,

video camera, etc.

This unit

REC1/OTR

Recording Time

Automatic Stop

Continuous recording

30 min

To stop recording

Recording mode: XP, SP, LP, EP

Preparation

Connect the Set Top Box or video equipment (> 17)

1 Press [INPUT SELECT] and select “AV”,

then press [OK].

2 Press [REC MODE] to select the recording

mode.

3 Select the channel on the Set Top Box or

start play on the video equipment.

4 Press [REC ¥].

Recording starts.

Press [STOP ∫].

Manually programming timer recording from external equipment

Refer to “Manually programming timer recording” (> 37).

• Following contents or media cannot be played back while recording from external equipment.

- BD-Video

- Xvid, MKV and AVCHD file

- photo

-SD card

- USB HDD (For data files, > 9) and USB memory

With Other Equipment

5 Set the time to record. (> 32)

Input AV

VQT4W71

Page 78

With Other Equipment

video camera, etc.

Time Rec time

Size 200 MB

0:30

9:00

HDD

Copy Video ( AVCHD ) Destination Capacity

Size

002 003 004 AVCHD

AVC HD

001

No. Channel

e.g., [SD]

Copying the HD Video (AVCHD)

4 Select the title, then press the yellow button.

A check mark is displayed. Repeat this step.

“For data files (> 9)” only

e.g., Connecting to the Panasonic video camera

• Press the yellow button again to cancel. (All the recordings on the same date become a title.)

USB connection cable

(optional)

1 Connect the video camera or insert the

media.

• Make the video camera ready for data transfer.

The menu screen appears. (> 43)

2 Select “Copy Video ( AVCHD )”, then press

[OK].

3 When copying from an SD card or video

equipment: Select “Copy to HDD” or “Copy to Blu-ray Disc”, then press [OK].

VQT4W71

5 Press [OK]. 6 Select “Start”, then press [OK].

It will automatically format the unformatted disc, such as a new disc.

• It may take time for the copying to start.

To stop copying

Press and hold [RETURN ] for 3 seconds.

To copy to the DVD-R in High Definition

Refer to “Copying HD Video (AVCHD) to the DVD-R in High Definition”. (> 63)

• The original file must be in the AVCHD standard.

• If you connect a Panasonic product with a USB con nection cable, setup screen may be displayed on the connected equipment. For details, refer to the instructions for the connected equipment.

• An AVCHD title with 100 or more scenes will be divided into titles every 99th scene and copied.

Screen icons

(NTSC)

(PAL)

Title recorded using a different encoding system from that of the unit.

• Titles displaying these marks cannot be selected.

Page 79

Registering the external HDD (USB HDD)

This unit’s rear panel

e.g.,

USB HDD

Connecting the USB HDD

“For recorded titles (> 9)” only

If you intend to move recorded titles to a USB HDD, the USB HDD must be registered to this unit first.

Limitation information

• A USB HDD with a capacity of less than 160 GB cannot be used.

• Registering of a USB HDD will format the USB HDD and all the content already recorded will be deleted.

• Up to eight USB HDDs can be registered on this unit.

• Registered USB HDDs cannot be used with devices other than this unit.

Regarding the external HDD (USB HDD)

Please use a confirmed USB HDD.

For the latest information on confirmed USB HDDs, please check the following website.

http://panasonic.jp/support/global/cs/

• Certain non-confirmed USB HDDs cannot be used with this unit.

• If a problem occurs with the USB HDD, please contact the manufacturer of the device.

Connect this unit with optional USB HDD.

• Only one USB HDD (For recorded titles, > 9) can be connected at the same time.

• Do not connect additional HDDs using a USB hub.

• For details about connection method, refer to the instructions supplied with the USB HDD.

Disconnecting the USB HDD

Please use the following procedure to disconnect. Disconnecting without following this procedure may result in the loss of recorded content from the USB HDD or the internal HDD.

1 Press [FUNCTION MENU]. 2 Select “Basic Settings” in “Setup”, then press

[OK].

3 Select “Settings for USB HDD” in “HDD /

Disc / USB HDD”, then press [OK].

4 Select “USB HDD Disconnection”, then

press [OK].

5 Select “Yes”, then press [OK]. 6 Disconnect the USB HDD from this unit.

With Other Equipment

VQT4W71

Page 80

With Other Equipment

Registering the external HDD (USB HDD)

Registering the USB HDD

• If the registering screen appears when connecting the USB HDD, go to step 5.

1 Press [FUNCTION MENU].

2 Select “Basic Settings” in “Setup”, then press

[OK].

3 Select “Settings for USB HDD” in “HDD /

Disc / USB HDD”, then press [OK].

4 Select “USB HDD Registration”, then press

[OK].

5 Select “Yes”, then press [OK].

• If you have already registered eight USB HDDs, it will be necessary to delete one or more of them before registering a new USB HDD. The message screen appears: 1 Select “Yes”, then press [OK]. 2 Select the USB HDD to cancel, then

press [OK]. The confirmation screen appears.

3 Select “Yes”, then press [OK].

To cancel all USB HDD registrations

Refer to “Cancellation of all USB HDD Registrations”. (> 91)

• If you register a USB HDD, all the content already recorded on the USB HDD will be deleted.

• It is not possible to play back the con tent on the USB HDD whose registration has been cancelled.

• You can check the registration number of the USB HDD on the DIRECT NAVIGATOR. (> 40)

6 When the registering is complete, message

screen appears. Press [OK].

7 The confirmation screen appears.

Press [OK].

VQT4W71

Page 81

VIERA Link functions

Convenient functions

What is VIERA Link “HDAVI Control”?

VIERA Link “HDAVI Control” is a convenient function which will link the operations of this unit and a Panasonic TV (VIERA) or an amplifier/receiver. You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment.

Automatic input switching/ Power on link

When the following operations are performed, the input channel of the TV will be automatically switched and the screen of this unit will be displayed. Additionally when the TV is off, the TV will automatically turn on.

- When play starts on this unit

- When an action that uses DIRECT NAVIGATOR etc, is performed

Power off link

When you set the TV to standby mode, this unit is also automatically set to standby mode.

• Power off link function does not work when recording, copying etc.

Convenient functions

PAUSE LIVE TV

You can operate this unit with the TV remote control. Refer to “PAUSE LIVE TV”. (> 31)

• This function is available with the TV that supports “HDAVI Control 3” or later.

Direct TV Recording

This function allows you to immediately start recording the programme that you are viewing on the TV. Refer to the TV operating instructions for operation.

• This function is available with the TV that supports “HDAVI Control 3” or later.

Easy control only with Panasonic TV’s remote control

You can operate this unit using the TV remote control.

Refer to the operating instructions of the TV about the buttons that you can use.

• This function is available with the TV that supports “HDAVI Control 2” or later.

Playing music continuously even after turning off power to the TV

The following operations make it possible to keep the power of the unit on and to play music continuously.

When the unit is directly connected to an amplifier/receiver. 1 While playing music

Press [OPTION].

2 Select “TV Power Off”, then press [OK].

• Sound may be discontinued for several seconds when the power to the TV is turned off.

• This function is available with the TV that supports “HDAVI Control 2” or later.

• This unit supports “HDAVI Control 5” function. “HDAVI Control 5” is the standard for Panasonic’s HDAVI Control compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment. Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.

• VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.

• These functions may not work normally de pending on the equipment condition.

• Use the remote control supplied with this unit if you cannot operate this unit using buttons on the TV remote control.

• The operation of this unit may be inte rrupted when you press certain buttons on the TV remote control.

VQT4W71

Page 82

Convenient functions

Basic Operation

Multi Audio Audio1 (Dolby D)

Subtitle Language eng (MPEG)

Subtitle Settings On

Audio Channel LR

Repeat Play Off

Aspect Normal

Item

Setting

e.g.,

Playback menu

A variety of operations and settings such as changing the subtitles and audio languages can be performed during playback of video or music. Also, picture and sound quality can be set to your personal taste.

1 Press [OPTION]. 2 Select “Playback Settings” in “Playback

Menu” or select “Playback Settings”, then press [OK].

3 Select the menu, then press [OK]. 4 Select the item, then press [OK]. 5 Change the setting.

Depending on the condition of the unit (playing, stopped, etc.) and media contents, there may be some items which cannot be selected or for which the effects do not work properly.

To clear the Playback menu

Press [RETURN ] until the Playback menu disappears.

Basic Operation

Soundtrack

Show or change the soundtrack.

Multi Audio

Switch in the case of multiple audio.

Audio Channel

Change audio (LR/L/R) during playback.

Subtitle Settings

Turn the subtitle on/off, and change the language depending on the media.

Subtitle Settings Subtitle Style

Select the subtitle style recorded on the disc.

Subtitle Language

Select the subtitle language in the case of multiple languages.

Angle

Change the number to select an angle.

Repeat Play

Select the item which you want to repeat.

Random

Select whether to play random or not.

Video

The original video recording method (MPEG-4 AVC etc.) appears.

Primary Video

The original video recording method appears.

Secondary Video

Video

Select on/off of images. The original video recording method

appears.

Soundtrack

Select on/off of audio and the language.

Aspect (> 105) Reception

The radio wave status during the playback of Smart Home Networking (DLNA) is displayed. (Only when a wireless connection is used)

VQT4W71

With some discs, you may only be able to make changes using the menus on the disc.

Page 83

Convenient functions

Video Settings

Picture Mode

Select the picture quality mode.

HD optimizer

Reduces unnecessary noise in videos. The greater the value is the less noise will appear.

Chroma Process

Adjusts the colour bandwidth, saturation, and hue of images by correcting colour signals with a high degree of precision.

Super Resolution / Detail Clarity

Adjusts the sharpness of images. The greater the value is, the sharper images will be.

Luma Process

Adjusts the contrast, brightness, and black-and-white gradation.

Progressive

Select the method of conversion for progressive output to suit the type of title being played.

•Auto

Automatically detects the film and video content, and appropriately converts it.

•Video

Select this setting when the content is distorted if “Auto” is selected.

•Film

Select this if the edges of the film content appear jagged or rough when “Auto” is selected. However, if the video content is distorted as shown in the illustration to the right, then select “Auto”.

Reset to Default Video Settings

Restores the default settings of the Video Settings menu.

Sound Settings

Sound Effects

• This function is effective when “Digital Audio Output” is set to “PCM”. (> 92)

Re-master 1/Re-master 2

Sound becomes more natural by adding higher frequency signals not recorded on the track.

Dialogue Enhancer

The volume of the centre channel is raised to make dialogue easier to hear.

3D Settings

Signal Format (> 48) 3D Picture Mode (> 48) Manual Settings (> 48) Graphic Display Level

You can change the 3D position of the playback settings display, etc., during the 3D playback.

Language

ENG English JPN Japanese ARA Arabic

FRA French CHI Chinese HIN Hindi

DEU German KOR Korean PER Persian

ITA Italian MAL Malay IND Indonesian

ESP Spanish VIE Vietnamese MRI Maori

NLD Dutch THA Thai BUL Bulgarian

SVE Swedish POL Polish RUM Romanian

NOR Norwegian CES Czech GRE Greek

DAN Danish SLK Slovak TUR Turkish POR Portuguese HUN Hungarian ¢ Others

RUS Russian FIN Finnish

• The menu is not displayed when playing photos.

VQT4W71

Page 84

Convenient functions

Basic Settings

RETURN

DVB Tuning HDD / Disc / USB HDD Picture Sound Display Connection Network Others

Basic Settings

You can change the unit’s settings of DVB Tuning, Sound, Display, Connection, Network etc. in the menu.

Common procedures

1 Press [FUNCTION MENU]. 2 Select “Basic Settings” in “Setup”, then press

[OK].

3 Select the menu, then press [OK]. 4 Select the item, then make the setting.

(> right)

• Follow the instructions on the screen if further operations are necessary.

• Depending on the connection or the status of this unit some items cannot be selected or changed.

To return to the previous screen

Press [RETURN ].

VQT4W71

Menu list

The locations of the setting items are as follows. For details on each setting item, please refer to the following pages.

DVB Tuning

Favourites Edit (> 86) Auto Setup (> 86) Settings for DVB-C Channels (> 87)

Channel List (> 87) Manual Tuning (> 87) Update Channel List (> 87) Signal Condition (> 87) New Channel Message (> 87)

Settings for DVB-T Channels (> 88)

Channel List (> 88) Manual Tuning (> 88) Update Channel List (> 88) Signal Condition (> 88) New Channel Message (> 88)

Child Lock (> 88)

Child Lock List (> 88) Parental Rating (> 88)

Preferred Language (> 88)

HDD / Disc / USB HDD

Settings for Playback (> 89)

3D BD-Video Playback (> 89) Soundtrack (> 89) Subtitles (> 89) Menu (> 89) BD-Live (> 89) BD-Video Parental Control (> 89) DVD-Video Parental Control (> 89) Subtitle Text (> 89) Pure Sound mode (> 89)

Settings for Recording (> 90)

Timer Record Start Buffer (> 90) Timer Record Stop Buffer (> 90) REWIND LIVE TV (> 90) Recording for Encrypted Channel (> 90) PIN Entry for Decrypt Recording (> 90) Aspect for Recording (> 90) Chapter Creation (> 90) BD / DVD Speed for High Speed Copy (> 90)

HDD Management (> 91)

Delete all titles (> 91) Delete all photos (> 91) Format HDD (> 91)

Settings for USB HDD (> 91)

USB HDD Registration (> 91) USB HDD Disconnection (> 91) USB HDD Management (> 91)

Delete all titles (> 91) Format USB HDD (> 91)

Cancellation of all USB HDD Registrations (> 91)

Page 85

Convenient functions

Picture

Still Mode (> 91)

Sound

Dynamic Range Compression (> 92) Downmix (> 92) Bilingual Audio Selection (> 92) Digital Audio Output (> 92)

PCM Down Conversion (> 92) Dolby D / Dolby D + / Dolby TrueHD (> 92) DTS / DTS-HD (> 92) MPEG (> 92) BD-Video Secondary Audio (> 92)

Audio Delay (> 93) Audio for HG / HX / HE / HL / HM Recording (> 93)

Display

Language (> 93) On-Screen Information (> 93) Unit’s Display (> 93) Screen Saver (> 93) Teletext (> 93)

Connection

3D Settings (> 94)

3D Type (> 94) 3D AVCHD Output (> 94) 3D Playback Message (> 94)

TV Aspect (> 94) Aspect for 4:3 Video (> 94) TV System (> 94) HDMI Connection (> 94)

HDMI Video Format (> 94) 24p(4K)/24p Output (> 94) Deep Colour Output (> 95) HDMI Audio Output (> 95)

7.1ch Audio Reformatting (> 95) Contents Type Flag (> 95) VIERA Link (> 95)

Common Interface (> 95)

Network

Easy Network Setting (> 96) Network Settings (> 96)

LAN Connection Mode (> 96) Wireless Settings (> 96)

Connection Setting (> 96)

Double Speed Mode Setting ( 2.4GHz ) (> 96) IP Address / DNS Settings (> 96) Proxy Server Settings (> 96) Network Service Settings (> 96)

Lock (> 96)

Automatic Volume Control (> 96) Remote Recording Function Settings (> 97)

Remote Recording function (> 97)

Device ID (> 97)

Initialize Device Password (> 97) Home Network Settings (> 97)

Home Network function (> 97)

Setting device name (> 97)

Conversion Setting for DLNA (> 97)

Resolution Setting for DLNA (> 97)

Registration type for remote devices (> 98)

Remote device list (> 98)

Others

Standby Settings (> 98)

Quick Start (> 98) Automatic Standby (> 98) Automatic Standby after OTR (> 98) Automatic Standby after Copy (> 99)

[DVB-C] RF OUT ( CATV Signal ) (> 99) [DVB-T] RF OUT ( Aerial Signal ) (> 99)

Power Save for Network Standby (> 99)

Remote Control (> 99) Clock (> 99) PIN Entry (> 99) System Update (> 100)

Software Update in Standby (> 100) Software Update Now ( Broadcast ) (> 100) Software Update Now ( Internet ) (> 100) Software Licence (> 100)

System Information (> 100) Initialize (> 100)

Shipping Condition (> 100) Default Settings (> 100)

VQT4W71

Page 86

Convenient functions

Basic Settings

DVB Tuning

Favourites Edit

You can create four favourites of channels for making viewing and recording easier.

After editing as follows, save the Favourites.

Press [RETURN ], then press [OK].

• To select the other Favourites list: Press the green button.

• To add channels to the Favourites list: Select the channel in the “All DVB Channels” column, then press [OK]. Repeat this step.

• Red: Change the sorting mode.

• Yellow: Add continuous block of channels to

the list at once.

•Press [3, 4] to make the block, then press

[OK].

• Blue: Select the Category.

• To change the order of the channels list: 1 Select the channel in the “Favourites”

column to move, then press the green button.

2 Select the new position, then press the

green button.

• To delete channels: Select the channel in the “Favourites” column, then press [OK].

• Yellow: Delete all channels.

• To change the name of the Favourites list: 1 Press the red button in the “Favourites”

column.

2Press [3, 4, 2, 1] to select a character,

then press [OK]. Repeat this step to enter other characters.

• Red: Delete a character.

• Blue: Delete all characters.

3 Press [RETURN ].

Auto Setup

You can restart the Auto Setup. (> 22) 1 Select “Yes”, then press [OK].

• If the country selection screen appears: Select the country, then press [OK].

2 Follow the on-screen instructions and make

the following settings.

[DVB-C]

1 Select “Digital Cable (DVB-C) Channels”,

then press [OK].

2 Select the item, then press [OK].

(For details, consult the cable provider.)

3 Select the items and change the items.

(For details, consult the cable provider.)

Channel number allocation

• Preset Channel Number

• Operator’s Channel Number ( LCN )

Search Mode

• All Channels Search for all channels.

• Free Channels Search for free channels only.

Scan Mode

• Quick: Scans the suitable frequency for the

selected country.

• Full: Scans the whole frequency range.

Frequency/Symbol Rate/Network ID

Normally set to “Auto”. If “Auto” is not displayed or if necessary, enter the value specified by your cable provider with number buttons.

4 Select “Start scan”, then press [OK].

Auto Setup starts.

[DVB-T]

Select “Digital Terrestrial (DVB-T) Channels”, then press [OK].

Auto Setup starts.

• The timer recording programmes are cancelled.

VQT4W71

Page 87

Convenient functions

Settings for DVB-C Channels

[DVB-C]

Channel List

You can edit the channel list.

• To hide/reveal channels 1 Select the channel. 2 Press [OK].

The check mark is removed/displayed.

• Red: Change the sorting mode.

• Yellow: Reveal all channels.

• Blue: Change the Category.

• To change the channel number assignment

1 Select the channel to change, then press

the green button.

2 Enter the channel number to reassign

with the number buttons.

3 Press [OK].

Manual Tuning

You can add new channels manually. 1 Adjust the frequency, symbol rate and

service ID. (For details, consult the cable provider.)

• Adjust the frequency by checking the signal strength and signal quality displays.

2 Select “Start scan”, then press [OK].

• The set channel is displayed in the table.

Signal Condition

You can check the quality and strength of signals. Press [CH WX] to select the channel.

• When the signal is too strong (red bar), reduce the CATV signal. (For details, consult your dealer or the cable provider.)

• When the signal is weak, check that the current broadcast channel is correctly broadcasting.

New Channel Message

Set whether to obtain the information automatically when a new DVB channel is added.

• This function is not available d uring an Operator profile update. (> 30)

Update Channel List

You can update the channel list to the latest one.

• This function is not available d uring an Operator profile update. (> 30)

VQT4W71

Page 88

Convenient functions

Basic Settings

Settings for DVB-T Channels

[DVB-T]

Channel List

You can edit the channel list.

• To hide/reveal channels 1 Select the channel. 2 Press [OK].

The check mark is removed/displayed.

• Red: Change the sorting mode.

• Yellow: Reveal all channels.

• Blue: Change the Category.

• To change the channel number assignment

1 Select the channel to change, then press

the green button.

2 Enter the channel number to reassign

with the number buttons.

3 Press [OK].

Manual Tuning

You can add new channels manually. 1 Press [3, 4] to select the frequency.

• Adjust the frequency by checking the signal strength and signal quality displays.

2 Press [OK] to start scan.

• The set channel is displayed in the table.

Update Channel List

You can update the channel list to the latest one.

Signal Condition

You can check the quality and strength of signals. Press [CH WX] to select the channel.

• The channels you can receive are affected by weather conditions, seasons, time (day/night), region, length of the cable that is connected to the aerial, etc.

• When the signal is too strong (red bar), reduce the signal amplification at your aerial. (For details, consult your dealer.)

New Channel Message

Set whether to obtain the information automatically when a new DVB channel is added.

Child Lock

• PIN is required to change. (> 27)

Child Lock List

You can restrict the viewing of channels and playback of titles. You can lock each channel or AV input. 1 Select the channel or AV input to lock. 2 Press [OK].

is displayed.

• Press [OK] again to cancel.

• Green: Lock all channels.

• Yellow: Unlock all channels.

Parental Rating

You can restrict the viewing and recording of channels unsuitable to children. Set a ratings level to limit broadcast viewing and playback.

• Follow the on-screen instructions.

Preferred Language

Select the language for multi broadcast. If the selected language is not available, the original language will be selected.

VQT4W71

Page 89

Convenient functions

HDD / Disc / USB HDD

Settings for Playback

3D BD-Video Playback

Select the playback method of 3D compatible video software.

Soundtrack

Select the audio language.

• If “Original” is selected, the original language of each disc will be selected.

• Enter a code with the number buttons when you select “Other ¢¢¢¢”. (> 100, Language code list)

Subtitles

Select the language for subtitle.

• If “Automatic” is selected and the language selected for “Soundtrack” is not available, subtitles of that language will automatically appear if available on that disc.

• Enter a code with the number buttons when you select “Other ¢¢¢¢”. (> 100, Language code list)

Select the language for disc menus.

• Enter a code with the number buttons when you select “Other ¢¢¢¢”. (> 100, Language code list)

BD-Live

You can restrict Internet access when BD-Live functions are used.

• If “On ( Limit )” is selected, Internet access is permitted only for BD-Live contents which have content owner certificates.

BD-Video Parental Control

Set an age limit of BD-Video play.

• PIN is required to change. (> 27)

DVD-Video Parental Control

Set a rating level to limit DVD-Video play.

• PIN is required to change. (> 27)

Subtitle Text

Select the language for Xvid and MKV subtitles text.

• This item is displayed only after playing back a Xvid or MKV file with subtitle text.

Pure Sound mode

You can enjoy movies or music in an environment more suitable for viewing by stopping the rotation of the HDD when playing back commercial BD-Videos, DVD-Videos or music CDs.

• If “On” is selected, timer recording does not start during playback BD-Video, DVD-Video or music CD.

VQT4W71

Page 90

Convenient functions

Basic Settings

Settings for Recording

Timer Record Start Buffer

This function sets the timer recording to start earlier than the TV Guide time.

Timer Record Stop Buffer

This function sets the timer recording to stop later than the TV Guide time.

REWIND LIVE TV

Turn on/off the REWIND LIVE TV function.

• When “Automatic Standby” is set to “Off” (> 98), “On” cannot be selected.

Recording for Encrypted Channel

The function allows you to change the recording limitation on the encrypted programme. (> 34)

PIN Entry for Decrypt Recording

If your CAM requires a PIN for timer recording, it can be entered here in advance.

Aspect for Recording

Sets the aspect ratio when recording or copying except in DR mode.

• “HG”, “HX”, “HE”, “HL” or “HM” mode: If “Automatic” is selected, the title will be recorded with the original aspect ratio.

• “XP”, “SP”, “LP” or “FR (recordings less than 5 hours)” mode: If “Automatic” is selected, the title will be recorded with the original aspect ratio at the time when recording started (including when recording started at a commercial, etc.).

• “EP” or “FR (recordings 5 hours or longer)” mode:

If “Automatic” is selected, aspect is fixed to 4:3.

• In the following cases, the programme will be recorded with the original aspect ratio.

- [BD-RE] [BD-R] When the recording mode is

set to “XP”, “SP”, “LP”, “EP” or “FR”

• In the following cases, aspect is fixed to 4:3.

- When recording to a +R, +R DL and +RW.

Chapter Creation

Set the Chapter Creation method.

• Even if “Automatic” is selected, depending on the programme to be recorded, the chapter may not be created correctly.

BD / DVD Speed for High Speed Copy

Select the speed of high-speed copying. If “Normal ( Silent )” is selected, the time required for copying will be longer.

VQT4W71

Page 91

Convenient functions

HDD Management

Press and hold [OK] for 3 seconds to show the following settings.

Delete all titles

Delete all titles (video) on the built-in HDD.

• Delete does not work if one or more titles are protected.

Delete all photos

Delete all photos on the built-in HDD.

Format HDD

Formatting deletes all contents on the built-in HDD, and they cannot be restored. Check carefully before proceeding.

Settings for USB HDD

USB HDD Registration

USB HDD Disconnection

This function puts the USB HDD in a state in which it can be safely disconnected. (> 79)

USB HDD Management

Press and hold [OK] for 3 seconds to show the following settings.

Cancellation of all USB HDD Registrations

This function cancels the registrations of all the USB HDDs registered on this unit. Only do this if you are going to dispose of this unit.

• Before operation, perform “USB HDD Disconnection” (> left) and remove the USB HDD.

• It is not possible to play back the content from a USB HDD whose registration has been cancelled.

Picture

Still Mode

Select the type of picture shown when you pause play.

• Field: Select if jittering occurs when “Automatic” is selected. (The picture is coarser.)

•Frame: Select if small text or fine patterns cannot be seen clearly when “Automatic” is selected.

(The picture is clearer and finer.)

Delete all titles

Delete all titles on the USB HDD.

• Delete does not work if one or more titles are protected.

Format USB HDD

Formatting deletes all contents, and they cannot be restored. Check carefully before proceeding.

VQT4W71

Page 92

Convenient functions

Basic Settings

Sound

Dynamic Range Compression

To lower the dynamic range for playback (e.g., at night).

• This does not work depending on broadcasts and recorded titles.

Downmix

Select the downmix system of multi-channel to 2-channels sound.

• Select “Surround encoded”, when the connected equipment supports the virtual surround function.

• There is no effect on “Bitstream” via HDMI AV OUT and DIGITAL AUDIO OUT terminal.

• The audio will be output in “Stereo” in the following cases.

- AVCHD playback

- [BD-V] : Playback of clicking sound on the

menu and audio with secondary video in picture-in-picture mode.

Bilingual Audio Selection

Select whether to record the audio type (“M1” or “M2”) when:

- File Conversion (> 52)

- Copying to a DVD-R, DVD-RW, +R and +RW.

Digital Audio Output

PCM Down Conversion

Select how to output audio with a sampling frequency of 96 kHz.

•On: Signals are converted to 48 kHz. (Choose when the connected equipment cannot process signals with a sampling

frequency of 96 kHz.)

•Off: Signals are output as 96 kHz.

• The signals will be converted to 48 kHz

regardless of the setting in the following cases.

- The signals have a sampling frequency of over 96 kHz.

- The disc has copy protection.

- “BD-Video Secondary Audio” is set to “On”. ([BD-V]) (> below)

Dolby D / Dolby D + / Dolby TrueHD DTS / DTS-HD MPEG

Select the audio signal to output.

• Select “PCM” when the connected equipment cannot decode the respective audio format.

• Not making the proper settings may result in noise.

BD-Video Secondary Audio

Turn on/off the clicking sound on the menu and audio with secondary video.

VQT4W71

Page 93

Convenient functions

Audio Delay

Mis-sync between the video and audio is corrected by delaying the audio output.

Audio for HG / HX / HE / HL / HM Recording

If the programme has multi channel audio, priority is given to what you select.

• This setting will give effect in the following cases.

- Timer recording (> 36)

- File Conversion (> 52)

- Normal speed copy in HG, HX, HE, HL or HM

mode from a title recorded in DR mode. (> 57, 60)

Display

Language

Select the language for on-screen menus.

On-Screen Information

Select the time until the channel information screen (> 29) disappears automatically.

Unit’s Display

Changes the brightness of the unit’s display.

• If “Automatic” is selected, the display turns dark during play and disappears when the unit is in standby mode. While using this mode, the standby power consumption can be reduced.

• When “Quick Start” is set to “Off” or “Timer Setting for Quick Start” (> 98), this function is fixed to “Automatic”.

Screen Saver

This is to prevent burn-in on the screen.

Teletext

Select the Teletext (> 30) display mode.

VQT4W71

Page 94

Convenient functions

Basic Settings

Connection

3D Settings

3D Type

If 3D video cannot be played back in 3D, you may be able to play it in 3D by changing the setting.

• Change the settings for 3D on the TV also when “Side by side” is selected.

3D AVCHD Output

If 2D AVCHD video is recognised as 3D video and cannot be played back correctly, you may be able to play it by changing the setting.

3D Playback Message

Set to display or hide the 3D viewing warning screen.

TV Aspect

Set to match the type of TV connected.

• Pan & Scan: Side picture is trimmed for 16:9

picture. The pictures may be shown in the letterbox style depending on the content.

• Letterbox: Black bands appear for 16:9

picture.

HDMI Connection

HDMI Video Format

You can only select items compatible with the connected equipment.

• If “Automatic” is selected, the output resolution best suited to the connected TV (1080p, 1080i, 720p or 576p/480p) is automatically selected.

• To enjoy High Quality Video up-converted to 1080p, you need to connect the unit to 1080p compatible HDTV. If this unit is connected to an HDTV through other equipment, it must also be 1080p compatible.

24p(4K)/24p Output

When playing BD-Video recorded in 24 frames, this unit displays each frame at 1/24 second intervals–the same interval originally shot with the film movie.

• 24p(4K): This item is effective only when this unit is connected to a TV supporting 4K output and

“HDMI Video Format” is set to “Automatic”. (> above)

• 24p: This item is effective only when this unit is connected to a TV supporting 24p output

and “HDMI Video Format” is set to “Automatic” or “1080p”. (> above)

Aspect for 4:3 Video

To play a 4:3 title, set how to show pictures on a 16:9 TV.

TV System

Set in accordance with the TV System for the connected TV.

VQT4W71

• When BD-Video images other than 24p are played, images are output at 60p.

• “24p(4K)” works only when playing back in 2D.

Page 95

Convenient functions

Deep Colour Output

This setting is for selecting whether to use Deep Colour output when a TV that supports Deep Colour is connected.

HDMI Audio Output

Select “Off” when connected to an amplifier/receiver with a DIGITAL AUDIO OUT terminal.

7.1ch Audio Reformatting

[BCT835] [BD-V]

Surround sound with 6.1 ch or less is automatically expanded and played back at

7.1 ch.

• If “Off” is selected, sound is played over the original number of channels. (Note that in the case of 6.1 ch audio, playback will be at

5.1 ch)

Audio reformatting is enabled in the following cases:

- When you have selected “PCM” in “Digital Audio Output”. (> 92)

- When the audio is Dolby Digital, Dolby

Digital Plus, Dolby TrueHD or LPCM.

Common Interface

Access to software contained on CI module. (> 14)

• Select “Slot 1:” or “Slot 2:” and press [OK]. Follow the on-screen instructions.

• This setting cannot be made when “TV System” is set to “NTSC” (> 94).

• On-screen instructions may not correspond to the remote control buttons.

• For more information about TV service, please contact your service provider.

• Depending on the card, in some cases its use together with this unit may be limited or not possible.

Contents Type Flag

If “Automatic” is selected, the optimal method of playback depending on the TV (e.g. cinema) will automatically be selected (only when the TV supports Contents Type Flag).

VIERA Link

Select “Off” when you do not want to use “HDAVI Control”.

VQT4W71

Page 96

Convenient functions

Wireless Settings

Double Speed Mode Setting ( 2.4GHz )

Connection Setting

Current connection settings

The current connection settings and status are displayed.

Connection status

Current status

Network name ( SSID )

Wireless type

802.11n (2.4GHz/20MHz) Authentication type Encryption type

AES

Connected

Reception

  

Basic Settings

Network

Easy Network Setting

Press [OK] to start Easy Network Setting. (> 24)

Network Settings

LAN Connection Mode

Select the LAN connection method.

Wireless Settings

This allows to set and check the connection settings of the Wireless router.

e.g.,

1 Encryption type 2 Reception 3 Type of wireless router

Connection Setting

The Wireless router connection wizard will be displayed.

Double Speed Mode Setting ( 2.4GHz )

When a 2.4 GHz wireless format is used, this setting sets the connection speed.

• If you connect using the “Double Speed Mode (40MHz)”, 2 channels use the same frequency band, and there is consequently a greater risk of reception

interference. This can cause the connection speed to drop or the connection to become unstable.

VQT4W71

IP Address / DNS Settings

Check the connection of the network or set the IP address and DNS.

• To set the IP address and DNS 1 Set “IP Address Auto-assignment” and

“DNS-IP Auto-assignment” to “Off”.

2 Select the item, then press [OK] to show

the respective setting.

• When the router’s DHCP server function is not activated, check the numbers of other connected devices such as personal computers, then assign a number different from those of other devices for the “IP Address” and assign the same number for “Subnet Mask” and “Gateway Address”.

Proxy Server Settings

Check and set the connection to the Proxy server.

• Press [OK] to show the respective setting.

Network Service Settings

Lock

You can restrict using Network Service.

• PIN is required to change. (> 27)

Automatic Volume Control

Volume is adjusted automatically to the standard volume while using Network Service.

• Depending on contents, this function will not work.

• Select “Off” when the audio is warped.

Page 97

Convenient functions

Remote Recording Function Settings

You must register to a service to use this function. For details please check the following website. http://panasonic.jp/support/global/cs/

(This site is in English only.)

Remote Recording function

When you set a recording from a smartphone or a PC, etc. away from home, set this function to "On".

Device ID

This is the device ID and device password required for registering to and using a service.

Initialize Device Password

The device password for this unit is initialized.

• When you initialize the device password, you will not be able to use Remote Recording function. To use the Remote Recording function again, you must re-register to the service.

Home Network Settings

You can set the DLNA (Server) function. (> 72)

Home Network function

You can switch between enable/disable of the DLNA (Server) and DMR (Media Renderer) function.

• If “On” is selected, the setting for “Quick Start” is fixed to “On”. (> 98)

• If “Off” is selected, the setting for “Remote Recording function” is fixed to “Off”. (> left)

• This cannot be set to “On” if the connection with the wireless broadband router is not encrypted in the wireless connection.

Setting device name

It is also possible to change the name of this unit on the network.

• Select from a preset list Select the preset name, then press [OK].

• Create name Enter the name.

Refer to “Entering text”. (> 104)

Conversion Setting for DLNA

•On: When playing back on DLNA (Client) compatible equipment, this setting

reduces the chance of break-ups and freezing of an image by lowering the image quality.

• When this is set to “On”, switching the channel or starting playback will take longer.

Resolution Setting for DLNA

When “Conversion Setting for DLNA” is set to “On”, select the image quality.

VQT4W71

Page 98

Convenient functions

Basic Settings

Registration type for remote devices

• Automatic: All connected devices on the same

network can access this unit.

• Manual: Only registered devices can access this unit.

Remote device list

• To register equipment manually 1 Select the device name or the MAC

Address for the device you want to register, then press [OK].

2 Select “Yes”, then press [OK].

• To deregister equipment 1 Select the registered equipment,

then press [OK].

2 Select “Yes”, then press [OK].

• This function cannot be enabled when “Automatic” is selected in “Registration type for remote devices”. (> above)

• The maximum number of equipment that can be registered is 16.

Others

Standby Settings

Quick Start

•On: It is possible to start quickly from standby mode.

• Off: Power consumption in standby mode is minimized. (> 117) However, startup time from standby mode will be longer.

• Timer Setting for Quick Start: “Quick Start” is activated when the set time

comes.

• When “Home Network function” (> 97) or “Remote Recording function” (> 97) is set to “On”, the setting for this function is fixed to “On”.

• If “Off” or “Timer Setting for Quick Start” is selected, the setting for “Unit’s Display” is fixed to “Automati c”. (

• The setting may be changed to “On” automatically when the setting for video communication is changed. (> 76)

Automatic Standby

Set the time to turn the unit to standby mode automatically. When the unit is not operating, the unit will be turned to standby mode once the set time has passed.

• When “REWIND LIVE TV” is set to “On” (> 90), “Off” cannot be selected.

93)

Automatic Standby after OTR

•On: This unit is turned to standby mode when it

is not operated for approximately 5 minutes after completing “Automatic Stop” or “Recording Time” (> 32).

VQT4W71

Page 99

Convenient functions

Remember the PIN.

PIN Entry

0 0 0 0

Automatic Standby after Copy

•On: This unit is turned to standby mode when it is not operated for approximately 5 minutes after completing copy (> 57, Copying from

media other than HDD with DIRECT NAVIGATOR, Copying titles with copying list).

[DVB-C] RF OUT ( CATV Signal ) [DVB-T] RF OUT ( Aerial Signal )

Set whether to output the broadcasting signal from RF OUT or not while in standby mode (When “Quick Start” is not activated).

• If “On” is selected, the broadcasting signal is output from this unit.

Power Save for Network Standby

You can minimize power consumption in standby mode even when the “Quick Start”

function is activated. (> 117)

• When this is set to “On”, startup time when operating [GUIDE] and [DIRECT NAVIGATOR] from standby mode will be longer.

Remote Control

Change the remote control code on the main unit and the remote control if you place other Panasonic products close together.

• Use “BD 1”, the factory set code, under normal circumstances.

Clock

If the time is not set correctly, use the settings listed in the method below.

• Automatic This unit usually obtains time and date information from digital broadcasts.

• Time Zone When the time is not correct, set “Time Zone”. (GMT - 6 to + 6)

• Manual Setting 1 Select “Off” of “Automatic”, then press [OK]. 2 Select the item you want to change. 3 Change the setting. 4 Press [OK] when you have finished the

settings.

• Wh en the clock is set manually, you cannot perform

playing/recording/PAUSE LIVE TV/REWIND LIVE TV of the programmes that are copy protected (Retention limit). (> 15)

PIN Entry

You can set/change the PIN for parental control.

1 Enter your 4-digit PIN with the number

buttons.

2 Enter the new 4-digit PIN with the number

buttons.

• Make a note of PIN in case you forget it.

e.g.,

1 Select the code, then press [OK]. 2 While pressing [OK], press and hold the

number button ([1] to [6]) for more than

5 seconds. 3 Press and hold [OK] for more than 5 seconds. 4 Press [OK].

3 Press [OK].

VQT4W71

Page 100

Convenient functions

Basic Settings

System Update

Software Update in Standby

When you set this unit to standby mode,

software (firmware) updates (> 101) are

downloaded automatically at the time you

have specified.

Software Update Now ( Broadcast )

You can check for the latest software

(firmware) version and update the software

(firmware) from broadcaster immediately.

[DVB-C] However, some cable providers do

not support this function.

Software Update Now ( Internet )

Refer to “Software (Firmware) Update”.

(> 101)

• Network connection and setting are required. (> 20, 24)

Software Licence

Information about the software licence is displayed.

System Information

Display Software (firmware) version, HDAVI Control version and Wireless Module version (When using wireless connection only) of this unit.

Initialize

Shipping Condition

All the settings except for some settings return to the factory preset.

• The timer recording programmes are also cancelled.

• The device password is also initialized. (> 97)

Default Settings

All the settings other than the tuning settings, clock settings, disc language settings, rating PIN, remote control code, device password, etc. return to the factory presets.

Language code list

Abkhazian: 6566 Afar: 6565 Afrikaans: 6570 Albanian: 8381 Amharic: 6577 Arabic: 6582 Armenian: 7289 Assamese: 6583 Aymara: 6589 Azerbaijani: 6590 Bashkir: 6665 Basque: 6985 Bengali; Bangla: 6678 Bhutani: 6890 Bihari: 6672 Breton: 6682 Bulgarian: 6671 Burmese: 7789 Byelorussian: 6669 Cambodian: 7577 Catalan: 6765 Chinese: 9072 Corsican: 6779 Croatian: 7282 Czech: 6783 Danish: 6865 Dutch: 7876 English: 6978 Esperanto: 6979 Estonian: 6984 Faroese: 7079 Fiji: 7074 Finnish: 7073 French: 7082 Frisian: 7089 Galician: 7176 Georgian: 7565 German: 6869 Greek: 6976 Greenlandic: 7576 Guarani: 7178 Gujarati: 7185 Hausa: 7265 Hebrew: 7387 Hindi: 7273 Hungarian: 7285 Icelandic: 7383 Indonesian: 7378 Interlingua: 7365 Irish: 7165 Italian: 7384 Japanese: 7465 Javanese: 7487 Kannada: 7578 Kashmiri: 7583 Kazakh: 7575 Kirghiz: 7589 Korean: 7579 Kurdish: 7585 Laotian: 7679 Latin: 7665 Latvian, Lettish: 7686

Lingala: 7678 Lithuanian: 7684 Macedonian: 7775 Malagasy: 7771 Malay: 7783 Malayalam: 7776 Maltese: 7784 Maori: 7773 Marathi: 7782 Moldavian: 777 9 Mongolian: 7778 Nauru: 786 5 Nepali: 7869 Norwegian: 7879 Oriya: 7982 Pashto, Pushto: 8083 Persian: 7065 Poli sh: 80 76 Portuguese: 8084 Punjabi: 8065 Quechua: 8185 Rhaeto-Romance: 8277 Romanian: 8279 Russian: 8285 Samoan: 8377 Sanskrit: 8365 Scots Gaelic: 7168 Serbian: 8382 Serbo-Croatian: 8372 Shona: 8378 Sindhi: 8368 Singhalese: 8373 Slovak: 8375 Slovenian: 8376 Somali: 8379 Spanish: 6983 Sundanese: 8385 Swahili: 8387 Swedish: 8386 Tagalog: 8476 Tajik: 8471 Tamil: 8465 Tatar: 8484 Telugu: 8469 Thai: 8472 Tibetan: 6679 Tigrinya: 8473 Tonga: 8479 Turkish: 8482 Turkmen: 8475 Twi: 8487 Ukrainian: 8575 Urdu: 8582 Uzbek: 8590 Vietnamese: 8673 Volapük: 8679 Welsh: 6789 Wolof: 8779 Xhosa: 8872 Yiddish: 7473 Yo r u b a : 8 9 7 9 Zulu: 9085

100

VQT4W71

Panasonic DMR-BCT735, DMR-BCT835 Operating Instructions

Specifications and Main Features

Frequently Asked Questions

User Manual