Panasonic DMP-MST60, DMP-MS10 Owner's Manual

Owner’s Manual
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure that our customers are enjoying the latest technology. Panasonic recommends updating your firmware as soon as you are notified. For details, refer to “Owner’s Manual (Detailed Information)” or http://panasonic.jp/support/global/cs/ (This site is in English only.)
(Essential Information)
Streaming Player
Model No. DMP-MST60
DMP-MS10
Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use.
Unless otherwise indicated, illustrations in this Owner’s Manual are of DMP-MST60.
Read this manual before use. For information on the operations, read “Owner’s Manual (Detailed Information)” on the Web.
“Owner’s Manual (Detailed Information)” is available at the link on the right.
[MST60] “Owner’s Manual (Detailed Information)” can
also be displayed from the HOME menu. [HOME]
> “Setup” > “Owner’s Manual”
(Internet connection required.)
Please read Conditions for using “Owner’s Manual
(Detailed Information)” (> 5).
If you have any questions, contact: 1-800-211-PANA(7262)
Register online at www.panasonic.com/register (U.S. customers only)
P
https://eww.pavc. panasonic.co.jp/ oi/MST60-10/
VQT4X68
Table of contents
(Alkaline or manganese batteries)
Accessories.........................................................................................2
Precautions..........................................................................................3
Conditions for using “Owner’s Manual (Detailed Information)” ............5
Copyrights and Trademarks.................................................................6
Limited Warranty................ ............ ......................... ............. ............. ...8

Accessories

Check the supplied accessories before using this unit. Product numbers provided in this Owner’s Manual correct as of December 2012.
These may be subject to change.
1 Remote control ([MST60] N2QAYB000889 / [MS10] N2QAYB000883) 2 Batteries for remote control 1 AC adaptor (VSK0811)
For use with this unit only. Do not use it with other equipment.Do not use any other AC adaptors except the supplied one.
1 HDMI cable (K1HY19YY0012)
Using the remote control
Insert so the poles (i and j) match those in the remote control.
R6/LR6, AA
Product Identification Marking is located on the bottom of the unit.Use category 5 or above straight LAN cables (STP) when connecting to peripheral
devices.
Point it at the remote control signal sensor on this unit.
VQT4X68
2

Precautions

WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or splashing.Do not place objects filled with liquids, such as vases, on this unit.Use only the recommended accessories.Do not remove covers.Do not repair this unit by yourself. Refer servicing to qualified service personnel.
AC adaptor
The power plug is the disconnecting device. Install this unit so that the power plug can be unplugged from the socket outlet immediately.
CAUTION
Batteries
Mishandling of batteries can cause electrolyte leakage, which can damage items the fluid contacts and may cause a fire. Danger of explosion if battery is incorrectly replaced. Replace only with the type
recommended by the manufacturer.
When disposing the batteries, please contact your local authorities or dealer and
ask for the correct method of disposal.
Do not mix old and new batteries or different types at the same time.Do not heat or expose to flame.Do not leave the battery(ies) in a car exposed to direct sun light for a long period of
time with doors and windows closed.
Do not take apart or short circuit.Do not attempt to recharge alkaline or manganese batteries.Do not use batteries if the covering has been peeled off.
Remove bat teries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
AC adaptor
This AC adaptor operates on AC between 100 V and 240 V. But In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC
power supply only.
When connecting to an AC supply outside of the U.S.A. or Canada, use a plug
adaptor to suit the AC outlet configuration.
VQT4X68
3
Wireless LAN Connection
The following limits are in place regarding the usage of this unit. You must be aware of these limits before using this unit. Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this unit.
Data transmitted and received over radio waves may be intercepted and
monitored.
This unit contains delicate electro nic compo n en ts.
Please use this unit in the manner in which it was intended and follow the following points: – Do not expose this unit to high temperatures or direct sunlight. – Do not bend, or subject this unit to strong impacts. – Keep this unit away from moisture. – Do not disassemble or alter this unit in any way.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction s, may cause har mful inter fere nce to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the user’s authority to
operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094
Support Contact: Panasonic Consumer Marketing Company of North America Telephone No.: 1-800-211-PANA (7262)
4
VQT4X68
Loading...
+ 8 hidden pages