Panasonic CQ-RG131W User Manual

High-Power Cassette Player/Receiver with Changer Control
Operating Instructions
CQ-RG131W
R
• Please read these instructions carefully before using this product and save this manual for future use.
2
E N G L
I S H
Contents
Panasonic welcomes you to their constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of enjoyment, and after you discover the quality, value, and reliability we have built into it, you too will be proud to be a member of our family.
Precautions
Volume Level
For your driving safety, keep the volume level low enough to be aware of road and traffic conditions.
Car Washing
To avoid electrical shorts which may cause fire or other damage, do not expose this equipment (including the speakers and tape) to water or excessive moisture.
Car Ventilation
If your car is parked for several hours in direct sunlight, the temperature inside the car may become very high. It is advisable to drive the car and give the interior a chance to cool down before switching the unit on.
Power Supply
This equipment is designed to be used in a car having 12-Volt negative ground battery system.
Tape Mechanism
Keep magnets, screwdrivers and other metallic objects away from the tape mechanism and tape head.
Service
This unit is made of precision parts. Do not attempt to disassemble or adjust any parts. For repair, please consult your nearest authorized Panasonic Service Center.
About Preset Memory
The preset memory is cleared to return to the original factory setting when the power connector or battery is disconnected.
Page
Precautions ................................................... 2
Power and Sound Controls ........................... 4
Radio Basics ................................................. 6
Casssette Tape Player Basics ...................... 8
CD Changer Basics .................................... 10
Clock Basics ............................................... 12
Installation Gudie......................................... 13
Page
Anti-Theft System ....................................... 16
Electrical Connections ................................ 18
Speaker Connections .................................. 19
Troubleshooting ........................................... 20
Fuse ............................................................ 21
Maintenance ............................................... 21
Specifications .............................................. 21
3
................................................ 3
..................................... 22
..................................... 24
....................... 26
................... 28
..................................... 30
....................................................... 31
................................................ 34
................................................ 36
............................................ 37
................................................ 38
.................................................... 39
....................................................... 39
....................................................... 39
4
E N G L
I S H
1
Power and Sound Controls
CQ-RG131W
LOUD
Power
Turn the key in the ignition until the accessory indicator lights. Press
[PWR] to switch on the power.
LO
U
D
Volume
Press [VOLjj] or [VOLii] to increase or decrease volume.
0 to 39
Volume Level
Press [VOLjj] or [VOLii] for more than 0.5 second to change numeric levels on the display rapidly.
CQ-RG131W
LOUD
Mute
Press [MUTE] mute the sound completely.
MUTE blinks while this operation.
Press [MUTE] again to cancel.
Tone Enhancement
Press and hold [MUTE] (LOUD) for more than 2 seconds to enhance bass and treble tones when listening at low or medium volume.
Press and hold [MUTE] (LOUD) for more than 2 seconds again to deactivate when listening at higher volumes.
Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic volume level adjuster so that you will not be deafened with sudden loud volume. This system operates as follows. When
[PWR] is switched on, the volume level is low. After that, the volume level gradually returns to the level as the same as the one before turning off. Anti-volume-blast circuit is not effective when volume level is lower than position 20 at the display.
Press and hold
CQ-RG131W
LOUD
5
E N G L
I S H
2
LO
U
D
D
Changing Audio Modes
Press [SEL] to switch the audio modes as follows.
VOL
a
BAS
a
TRE
(Volume) (Bass) (Treble)
cd
FAd
b
BAL
(Fader) (Balance)
Bass and Treble
Press [SEL] to select the BASS/TREBLE mode. Press [VOLjj] or [VOLii] to increase or decrease the bass/treble response.
12 to 0 (Center) to 12
12 to 0 (Center) to 12
Balance
Press [SEL] to select the BALANCE mode. Press [VOLjj] or [VOLii] to shift the sound volume to the right or left speakers.
1 to 15R or L
Balance Center
Fader
Press [SEL] to select the FADER mode. Press [VOLjj] or [VOLii] to shift the sound volume to the front or rear speakers.
1 to 15F or R
Fader Center
Note: When a control mode (BAS/TRE/BAL/FAd) is selected but no operation is made within 5 seconds (2 seconds at volume mode), the display will return to the normal operation (Radio, Cassette, etc.) mode. In such a case, press
[SEL] again to select the next control mode.
d
(R: Right, L: Left)
(F: Front, R: Rear)
LO
U
D
U
LO
6
E N G L
I S H
3
Radio Basics
CQ-RG131W
LOUD
CQ-RG131W
Change to the tuner mode
In case of Tape mode ..............................Eject a tape.
In case of CD Changer mode ..................Press [BAND].
CQ-RG1
L
O
U
D
Selecting a Band
Press [BAND] to select the band as follows.
FM1
a
FM2
a
FM3
a
AM
cd
"ST" indicator lights if the station is broadcasting in stereo.
CQ
L
O
U
D
Q
Manual Tuning
Press [TUNEjj] or [TUNEii] to move to a higher or lower frequency.
Seek Tuning
Press and hold [TUNEjj] or [TUNEii] for more than 0.5 second, then release. The radio automatically stops on the next station.
To reduce interference during FM broadcasts (MONO)
Press [MONO] for monaural reception in case a lot of interference is present in an FM stereo signal or to improve the listening quality of weak FM broadcasts. To turn it off, press
[MONO] again.
Hold and release
C
D
U
LO
CQ
LO
U
D
7
E N G L
I S H
4
Manual Station Preset
Press [BAND] to select a desired band.
Use manual or seek tuning to find a station that you want to program into memory.
Press and hold one of the station selector buttons [1] through [6] until the display blinks. The memory is now set for that
button on the band you have selected. Repeat the process to set other stations for the FM1 to AM bands.
Auto Preset Memory
Select a band, and press and hold [BAND] (APM) for more than 2 seconds.
The 6 strongest available stations will be automatically set in memory on preset buttons
[1] through [6].
Once set, the preset stations are sequentially scanned for 5 seconds.
Press the appropriate preset button for the station you want to hear.
Note: The stations manually preset on the selected band will be
deleted.
Note: You can change the memory setting by repeating the above procedure.
Preset Station Setting
Up to 24 stations can be preset in the station memory as follows;
FM1 FM2 FM3 AM
6 stations 6 stations 6 stations 6 stations
CQ-RG
LO
U
D
1
Preset Number
Press and hold
d
d
Caution: For safety reasons, do not attempt to program while driving.
Tuning in a Preset Station
Press any of the buttons [1] through [6] to tune in the station preset by the above steps
to .
Press and hold
1W
CQ-RG
D
U
LO
8
E N G L
I S H
5
Cassette Tape Player Basics
CQ-RG131W
LOUD
CQ-RG131W
U
D
Loading a Cassette
Gently insert a cassette with the exposed tape side facing to the right until the mechanism captures it, and playback starts.
Program Indicator (This indication “” rotates.)
Rewind and Fast Forward
When the program indicator ” lights, press [] to rewind or press
[] to fast forward the tape.
When the program indicator
lights, press [] to fast forward
or press
[] to rewind the tape.
To stop rewind or fast forward, gently press the button that is not in use. The tape will resume playing from that position.
Changing Sides
Press [] and [] at the same time to switch to the program on the other side of the tape. The display changes to indicate which program is playing.
Top Side Playing Bottom Side Playing
Press Both at the
same time
lights : Fast Forword
lights : Rewind
lights : Rewind
lights : Fast F orword
Exposed Tape
9
E N G L
I S H
6
CQ-RG131W
Once inserted into the unit, your tape will play continuously until you eject it. If you press
[u] (EJECT), the unit ejects the tape and returns to
radio operation. When you stop the car engine, the tape will stop but not be ejected.
Notes:
You can not change to CD Changer mode or Radio mode while tape is playing. If you want to change to CD Changer mode or Radio mode, eject the tape.
Always remove the cassette when you stop using the cassette player. This will prolong the life of your tape.
Stopping and Ejecting the Tape
Notes on Cassette Tapes
Pencil
Do not touch or pull out the tape.
Tape Slack: Use a pencil or similar object to take up the slack as shown. If a loose tape is used, this may result in the tape becoming tangled in the rotating parts of the unit.
Cautions:
To maintain your cassette player in top condition, avoid using tapes that are longer than 90 minutes (C-90).
If you insert into the unit a cassette with a loose tape caused by forcing it into cassette with a finger or the like, the cassette may not be properly reproduced. In such a case, eject the cassette, make the tape tight, then insert it back into the deck.
10
E N G L
I S H
7
CD Changer Basics
Note:
CD changer functions are applicable to units with optional CD changer unit. (sold separately)
CQ-RG131W
LOUD
To Changer mode
While a disc magazine is inserted in the CD changer, press [CD·C]. Play starts from the first track.
CQ-RG131W
LO
U
D
Selecting a Disc
Press [1] (iDISC) or [2] (DISCj) to select discs in ascending or descending order.
Selecting a Track
Press [TRACK] once to go to the next track. Press repeatedly to step forward through all the tracks. Press
[TRACK] once to play from the beginning of the current
track. Press twice to play the previous track. Press repeatedly to step backward through all the tracks.
Note: The cassette, if loaded, should be removed. Otherwise, the CD play will not start.
CQ
L
O
U
D
Play
Time
Disc Number
Track Number
11
E N G L
I S H
8
Error Display Messages
Searching a Track
Press and hold [TRACK] or [TRACK] for more than 0.5 second to activate fast forward or reverse through a track. Release [TRACK] or [TRACK] to resume the normal CD play from that position.
CQ
LO
U
D
Repeating a Track
Press [4] (REPEAT) to repeat the current selection. REPEAT indicator lights.
The current selection continues to repeat until you press [4] (REPEAT) again.
Hold and release
Random Selection
Press [5] (RANDOM) to random selection of music is played from all available CDs. “RANDOM” indicator lights.
To turn it off, press [5] (RANDOM) again.
Scanning Tracks
Press [3] (SCAN). The track number blinks and the first 10 seconds of each track on the discs play in sequence.
To stop scanning and continue with the current track, press [3] (SCAN) again.
Scanning Discs
Press and hold [3] (SCAN) for more than 2 seconds. The 1st track of all the discs in the magazine is played for 10 seconds each. Also, Disc Number blinks at the same time. To stop the current play of the disc scanning, press and hold
[3] (SCAN) for more
than 2 seconds again.
Displays when the compact disc is dirty or upside down. Selects the next available compact disc.
Displays when compact disc is scratched. Selects next available compact disc.
Displays when the compact disc stops operating for some reason. Please contact your nearest authorized Panasonic Service center.
Displays when there is no disc in the magazine.
Press and hold
12
E N G L
I S H
9
Clock Basics
(The clock system is 12-hours.)
CQ-RG131W
LOUD
Initial Time Setting
Press [DISP]. AdJ is displayed.
Press and hold [DISP] again for more than 2 seconds. “12” blinks indicating the time setting mode is activated.
To set hours, press [jj] or [ii].
Press [DISP] again for minute setting.
To set minutes, press [jj] or [ii].
Hold
[jj] or [ii]to change numbers
rapidly.
When you have set the time, press [DISP].
d
d
Resetting the Time
When you want to reset the time, press and hold [DISP] for more than 2 seconds to activate the time setting mode. Then, repeat step
to above.
Selecting the Clock Display
Press [DISP] for clock display. Press
[DISP] once again, the current audio display mode
resumes.
CQ
L
O
U
D
 
 
 
Press and hold
Press and hold
Loading...
+ 28 hidden pages