1 Service Navigation ----------------------------------------------- 2
2 Specifications ----------------------------------------------------- 3
3 Features ------------------------------------------------------------- 4
4 T ec hnic al Desc ri ptions----------------------------------------- 5
5 Disassembly and Assembly Instr uctio ns---------------10
6 Block Diagram----------------------------------------------------13
7 Block Diagram----------------------------------------------------14
8 Wiring Connection Diagram---------------------------------16
9 Schematic Diagram---------------------------------------------17
10 Printed Circuit Board-------------------------------------------21
11 Exploded View and Replacement Parts List -----------25
12 Schematic Diagram for Printing with A4 Size----------33
• PCBs (manufactured) using lead free solder will have a Pb F
stamp on the PCB.
Caution :
• Pb free solder has a higher melting point than standard solder; Typically the melting point is 50 - 70°F (30 - 40°C)
higher. Please use a soldering iron with temperature control
and adjust it to 700 ± 20°F (370 ± 10°C). In case of using
high temperature soldering iron, please be careful not to
heat too long.
• Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
1.2.Laser Products
1.4.Maintenance
Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry, a soft cloth for routine exterior
cleaning. Never use benzine, thinner or other solvents.
1.5.Notes
[RADIO BLOCK]
Do not align the AM/FM package block. When the package
block is necessary, it will be supplied alrea dy alig ned at the factory.
[DVD DECK BLOCK]
This model has no servo alignment points because microcomputer controls the servo circuit.
1.3.Replacing the Fuse
Use fuses of the same s pe cif ied rati ng 15 a mps. Using different
substitutes or fuses with higher ratings, or connecting the unit
directly without a fu se, could cause fire or damage to th e st ere o
unit.
2
2Specifications
2.1.Specifications*
General
Power SupplyDC 12V (11V - 16V)
Test Voltage 14.4V
negative ground
T one controls(Bass/Treble)Bass;±12dB at 60 Hz, Treble;±12dB at
16 Hz
Variable range of equalizer-12dB to 12dB (2 dB step)
Current ConsumptionLess than 2.3A (DVD mode,0.5W 4-
speaker)
Maximum Power Output50 W x 4CH(at 400Hz)
Power Output22 W x 4CH (1kHz,1%, 4Ω)
Video signal systemNTSC/PAL 1.0 Vp-p 75Ω RCA pin jack
Speaker Impedance 4 -8 Ω
Tone adjustment range Bass;±12dB (at 100 Hz), Tre-
USB standard compatibility 1.1/2.0 full speed
File systemFAT 12/16/32
Maximum supply current500mA
Playable audio formatMP3/WMA
Recommended capacityLess than 4GB (1 partition)
Front AV input (AV1 IN)
Input impedance47 kΩ
Allowable external Input2.0 V
Connector3.5 mm Stereo mini pin (Equipped
with video input terminal)
Video input signalComposite video signal, 1.0 Vp-p (75
Ω)
Audio input sensitivity2 Vrms
Aux input
Input Impedance10kΩ
Alllowable external input2V
T one/SQ adjustab le rangeSQ Low/bass;±12 dB(at 60 Hz,80
* Specifications and the design are subject to possible modification
without notice due to improvements.
** Dimensions and Weight shown are approximate.
*** Above specifications comply with EIA standards.
2.2.Dimensions
Dimensions (W×H×D)**178×50×160mm
Weight**1.4 kg
Disc Player
DA Converter1 bit DAC system
Pick -up typeAstigama 3-beam
Light sourceSemiconductor laser
Frequency response20 Hz - 20kH (CD)
20 Hz - 22kHz(DVD video 48 kHz
sampling)
20 Hz - 44kHz(DVD video 96 kHz
sampling)
Signal to noise ratio95 dB (IHF, A )
WoW and fluterBelow measurable limits
FM stereo radio
Frequency range87.5 MHz - 108 MHz
Usable sensitivity6dB/µV (S/N 30 dB)
Stereo separation35 dB (at 1 kHz)
AM (MW) radio
Frequency range531 kHz - 1602 kHz
3
3Features
• FM/AM radio, DVD Video/Video CD player and CD/MP3/
DivX player.
1EFMINRF signal inputI2
2RFOUTRF signal outputO1.9
3LPFRF signal DC level detection
4PHLPFDefectdetectionlow-pass
5AINA signal inputI1.6
6CINB signal inputI1.6
7BINC signal inputI1.6
8DIND signal inputI1.6
9SLCISET SLCO output current setting
low-passfiltercapacitor
connevtion
filter capacitor connection
resistor connection
O2
O2
I0.5
6
Pin.
Part No.Part Name & DescriptionI/O(V)
No.
10RFMONICinternalanalogsignal
11VRFEVREF voltage outputO1.6
12JITTCJitterdetectioncapacitor
13EINE signal inputI1.6
14FINF signal inputI1.6
15PCNCNTEFM PLL Charge Pump Control
16TETE signal outputO0.6
17TEINTE signal input used for TES
18LDDLaser power control signal
19LDSLaser power control signal
20AVSSAnalog system ground.-0
21AVDDAnalog system power supply-3.2
22FDOFocuscontrolsignalout-
23TDOTracking control signal out-
24SLDOSled control signal output.D/
25SPDOSpindle control signal out-
26VVSS1Internal VCO ground-0
27PDOUT1Internal VCO control phase
28PDOUT0Internal VCO control phase
29PCKISTPDOUT0 1 output current set-
30VVDD1internal VCO power supply-3.2
31CONT5General purpose outputO0
32CONT3General purpose input/outputI/O 0
33DEFECTMonitor output pinI/O 3.8
34FSEQMonitor output pinI/O 3.8
35C2FMonitor output pinI/O 3.8
36DVDDDigotal system power supply-3.2
37DVSSDigotal system ground-0
38DVDD15Digotal circuit power supply
39VVDD3Internal PLL power supply-3.2
40VVSS3Internal PLL power ground-0
41DVDDDigotal system power supply-3.2
42DVSSDigotal system ground-0
43CEHost I/F:Chip enable signal