Panasonic BB-HCM701CE, BB-HCM701, BB-HCM705 Important Information Manual

Important Information
Network Camera (PoE Ready)
Model No.
BB-HCM701
This installation should be made by a qualified service person and should conform to all local codes.
BB-HCM705
Indoor Use Only
Indoor Use Only
This manual is written for both the BB-HCM701 and the BB-HCM705. Available features and operations vary slightly depending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera. Model number suffix “CE” is omitted from the following model numbers shown in this document, unless necessary. BB-HCM701CE, BB-HCM705CE All documentation can be found on the included CD-ROM.
• Important Information (PDF format; printed version also included)
This document. Provides general information and safety instructions for using the camera.
• Installation Guide (PDF format; printed version also included)
Describes how to physically connect the camera to the power supply and network, as well how to mount or place the camera for regular use.
• Setup Guide (PDF format; printed version also included)
Describes how to set up the camera so that it can be accessed using a PC.
• Operating Instructions (HTML format)
Explains how to operate, program, and maintain the camera.
• Troubleshooting Guide (HTML format)
Provides solutions for problems you may have when using the camera.
• Stand-alone SD Memory Card Recording Guide (PDF format; printed
version also included) Describes how to record images to an SD memory card without using a
PC.
Abbreviations
• The Network Camera is referred to as “the camera” in this document.
• The Setup CD-ROM is referred to as “the CD-ROM” in this document.
• The term “SD memory card” is used in this document to refer to SD memory cards and SDHC memory cards.
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury.
Note:
• References to the AC adaptor and the AC cord apply when using the optional BB-HCA7CE or BB-HCA7E AC Adaptor.
1. Read and understand all instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Attach the Safety Wire to the camera to prevent it from dropping.
6. After taking away the sand or the dust on the lens cover, wipe the lens cover with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
9. Protect the AC adaptor cord, the AC cord and the extension cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the unit.
10. The AC cord is used as the main disconnect device. Ensure that the socket-outlet shall be installed near the equipment and shall be easily accessible.
11. Only use attachments/accessories (such as the safety wire) specified by the manufacturer.
12. Do not touch the unit, the LAN cable, the AC adaptor, the AC adaptor cord, the AC cord and the extension cord during lightning storms.
13. Unplug the unit from power supply when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as when the AC adaptor, the AC adaptor cord, or the AC cord is damaged, the unit does not operate normally, or has been dropped.
15. Prolonged exposure to direct sunlight or halogen light may damage the image sensor.
16. The camera is intended for indoor use only.
17. Keep the SD memory card (customer-provided) out of reach of children to prevent swallowing.
18. Unplug this unit from power supply if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center.
19. If for some reason the camera is no longer used, uninstall the camera to avoid the risk of the camera falling.
SAVE THESE INSTRUCTIONS
Other Information
CAUTION:
• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• To reduce the risk of electric shock, do not remove cover (or back).
• The camera is to be connected only to PoE networks without routing to the outside plant when using PoE.
Environment:
Do not install the camera where the temperature is less than +0 ° C or greater than +40 °C. Allow 10 cm clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
Routine care:
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. When you leave the unit unused for a long period of time, disconnect the LAN cable (when using PoE) from the camera, or disconnect the AC adaptor from the outlet (when using the optional AC adaptor).
If you have any problems:
Consult an authorized service center.
Security Cautions
When using this product, take appropriate measures to avoid the following security breaches.
• Disclosure of private information via this product
• Unauthorized use of this product by a third party
• Interference or suspension of the use of this product by a third party
You are responsible for the security of this product and its use. Take the following measures to avoid security breaches.
• To prevent unauthorized access, disclosure of private information, or interference or suspension of access to the camera, make sure the camera’s firmware is up to date.
• Do not reveal the user names and passwords required to access the camera to an unknown party.
• If you choose to configure this product to allow access to parties without the need to enter a user name and password (i.e., guest users), be aware that unknown parties may access this product.
• Do not upload images produced by this product or otherwise release information where it may be accessed by unknown parties.
• M ount the camera where the camera will not be stolen.
• When sending this product for service or transferring this product to another party, make backup copies of its setup files, and reset this product to its factory default settings.
• When disposing of this product, reset the product to its factory default settings, or erase the product’s memory by means of electrical deletion or physical dismantlement.
• After the camera is accessed by the administrator, make sure to close the browser for added security.
• Change the administrator password periodically for added security.
User Name and Password Protection The use of unique user names and secret passwords is an important tool that will help limit unauthorized individuals from accessing the camera. If you choose to disable this tool by allowing guest (i.e. anonymous) access, the camera may be accessed by unauthorized individuals.
AVC/H.264 Visual License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (I) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE http://www.mpegla.com.
No responsibility will be taken by our company with respect to consequences resulting from the use, damage or both of the camera.
Please read this document before using the product, and save this document for future reference. Panasonic Network Camera Website:
http://panasonic.net/pcc/ipcam/
© Panasonic System Networks Co., Ltd. 2009 PNQX2141XA KK0909CQ3120 (CE)
MPEG-4 Visual License
This product is licensed under the MPEG-4 Visual patent portfolio license for the personal and non-commercial use of a consumer for (i) encoding video in compliance with the MPEG-4 Visual Standard (“MPEG-4 Video”) and/or (ii) decoding MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed by MPEG LA to provide MPEG-4 Video. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses and licensing may be obtained from MPEG LA, LLC. See
http://www.mpegla.com.
About the H.264/MPEG-4 Viewer Program
The H.264/MPEG-4 viewer program is an ActiveX® Control that is used to play H.264/MPEG-4 files within Internet Explorer. This software is installed automatically the first time you view H.264/MPEG-4 videos. A software license for the H.264/MPEG-4 decoder is included with the H.264/ MPEG-4 viewer program, and the license is valid for 1 PC. Please read the included End-User License Agreement before installing the viewer program. When installing the H.264/MPEG-4 viewer program on additional PCs, please purchase additional licenses (Model No. BB-HCA8CE, BB-HCA5CE).
System Requirements
Your PC and network must meet the following technical specifications in order for the camera to function properly.
*1 BB-HCM705 only
*2 What is IPv6?
• IPv6 is short for “Internet Protocol Version 6”.
• IPv6 was created to provide the additional IP addresses that will be needed as the Internet continues to expand.
• IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a number of years during a transition period.
• Though most ISPs (Internet Service Providers) do not yet support IPv6, many local networks already use it. When your ISP supports IPv6, your Panasonic Network Camera will be ready!
Note:
Refer to the Panasonic Network Camera website at
http://panasonic.net/pcc/support/netwkcam/
for details about network environment, and for information about the restrictions depending on which Windows operating system or Internet Explorer version you are using.
Audio and Video Recording Notice
Please note that under certain circumstances, audio/video recording may be prohibited by law. This device should be used only in compliance with all applicable laws and statutes.
About the Software License
• This software includes certain software derived from the RSA Security, Inc. MD5 Message-Digest Algorithm.
• This software includes certain software derived from OpenSSL and NetBSD according to their licensing terms, as well as software developed by ACME Labs.
For licensing terms, refer to “Software License Information” on the CD­ROM.
For European Union (EU)
Sales Department:
For information of Compliance with EU relevant Regulatory Directives, Contact to Authorised Representative: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany
Item Requirement
Operating System Microsoft
®
Windows® 7, Windows Vista®, Windows XP
Service Pack 2 or later
CPU 3.2 GHz Pentium
®
4 or faster
(2.13 GHz Intel
®
Core™2 Duo or faster when viewing
1280 x 960 images
*1
or the multi camera page )
RAM 512 MB or more; 1 GB or more recommended
(1 GB or more recommended when viewing 1280 x 960 images
*1
or the multi camera page)
For Windows 7
1 GB or more
Video RAM 256 MB or more
Display 1024 x 768 resolution or higher
Protocol For IPv4 Connection
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
For IPv6 Connection
*2
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ICMPv6, NDP)
Interface 10/100 Mbps network card
Web Browser Internet Explorer
®
6, Internet Explorer 7,
Internet Explorer 8 (32-bit)
Audio PC speaker or headphones (required to use the Listen
feature)
Additional
Software (For
Viewing Buffered
MPEG-4 Images)
For Windows 7
Windows Media
®
Player 12 or later
For Windows Vista
Windows Media Play er 11 or later
For Windows XP
Windows Media Player 9 or later
Panasonic UK Ltd
Panasonic House, Willoughby Road, Bracknell, Berks, RG12 8FP
Panasonic France
1-3 avenue Francois Mitterrand F-93218-La Plai ne Saint Denis
Panasonic Deutschland
a division of Panasonic Marketing Europe GmbH Winsbergring 15 22525 Hamburg
Panasonic Italia SpA
Via Lucini 19 20125 Milano
Panasonic Espana S.A.
WTC Almeda Park Plaza de la Pau s/ n Edificio 8, pla nta baja 08940 Cornella de Llobregat Barcelona
Panasonic Nordic AB
Ellipsvagen 12 S-141-06 Kungens Kurva Stoc khol m
Branch of Panasonic Nordic AB ProduKtionsvej26, DK-2600 Glostrup
Panasonic Belgium
Branch of Panasonic Markteting Europe GmbH Brusselsesteenwe g 502 - 1731 Zellik
Panasonic Eastern Europe H.m.b.H.
A-1232 Wien, Laxenburger Strabe 252
Kauko-Telko Oy
Kutojantie 4 02630 Espoo
Haagtechno bv
p.o.box 236 5201 AE’s-hertogenbosch eulopalaan 30 (5232 BC)
PROSONIC S.A.
Lisboa (Sede), Rua Rui Teles Palhinha num.3 - Leiao, 2744-015 Porto Salvo
INTERTECH S.A.
24, Afroditis St., GR-167 77 Helliniko
Önemli Bilgiler
Türkiye’deki kullanıcılar için
EEE Yönetmeliğine Uygundur.
Important Information
For users in Turkey
EEE Complies with Directive of Turkey.
İthalatçı Firma Panasonic Elektronik Satış A.Ş.
Maslak Mah. Bilim Sokak Sun Plaza Kat:16 Şişli İstanbul Tel : 0212 367 94 00 Faks: 0212 286 21 11 Müşteri Hizmetleri: 444 72 62 www.panasonic.com.tr
Trademarks
• SDHC Logo is a trademark.
• Microsoft, Windows, Windows Vista, ActiveX, Internet Explorer, and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
• Intel Core and Pentium are trademarks of Intel Corporation in the U.S. and other countries.
• All other trademarks identified herein are the property of their respective owners.
The information in this document is subject to change without notice.
Panasonic System Networks Co., Ltd.
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
Copyright:
This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.
Loading...