Panasonic AW-SF100 installation

AW-SF100

Standalone Version

Installation Procedures

Revision 0.06 November 26, 2015

Professional AV Systems Business Unit

Panasonic AVC Networks Company

Panasonic Co., Ltd.

1. INTRODUCTION .................................................................................................... 3

2. SETTING THE REMOTE CAMERA ............................................................................. 4

2.1. Setting AW-HE130 ............................................................................................. 4

2.2. Setting AW-UE70/AW-HE40 ................................................................................. 4

3. INSTALLATION ..................................................................................................... 6

3.1. Installation Procedure of MjpegProcessor ................................................................. 6

3.2. Installation Procedure of Auto Tracking Software......................................................... 9

4. STARTUP AND EXIT ............................................................................................. 12

4.1. Starting the Software ........................................................................................ 12

4.2. Exiting the Software ......................................................................................... 12

5. ABOUT THE OPERATION MANUAL ......................................................................... 12

5.1. Method of Displaying the Operation Manual ............................................................ 12

6. ABOUT ACTIVATION ............................................................................................ 12

1. Introduction

This manual describes the installation procedures of the Auto Tracking Software (Standalone
version) that runs on a Windows PC.

Operating Environment

The below-mentioned environment is necessary for using this software:

PC hardware

● CPU
Core i5-3320M (2.60 GHz) or above

● Memory
4 GB or above

● Display
1920 x 1080 or above

Software (Windows)

● OS
Windows 7 Professional (SP1), Ultimate (SP1) 32 bit/64 bit
Windows 8.1 32 bit/64 bit
Windows 10 32 bit/64 bit

● Visual C++ Runtime
Visual C++ 2010 Runtime (x86）

Remote camera

Panasonic remote camera

AW-UE70
AW-HE130
AW-HE40

<Notes>

• If you are using this software, you must install Visual C++ 2010 Runtime (x86). You may
download and install it from the Microsoft site.

• Use the latest version of the remote camera firmware. You can download the firmware from
the following Website:

http://pro-av.panasonic.net/en/

• Panasonic recommends a wired connection between the PC and remote camera. In the
case of a wireless connection, sufficient tracking performance may not be achieved.

2. Setting the Remote Camera

Before using this software, set the remote camera according to the procedures described below.

2.1. Setting AW-HE130

1. Start Internet Explorer.

2. Enter "http://[IP address of AW-HE130]" in the URL.

3. The Web screen of AW-HE130 opens.
* Perform installation when the installation message for Viewer appears.
* A confirmation message for confirming whether to enable the pop-up appears. Select "Enable".

4. Click the Setup tab at the top left of the Web screen.

5. An authentication dialog box appears. Enter the account and password for the remote camera.

6. The settings menu is displayed on the left of the Web screen. Click the Image/Audio button.

7. Click the Video over IP tab at the top of the Web screen.

8. Set the items of the Initial display settings for “Live” page as shown below, and then click the Set

button.

Stream : JPEG(1)
Refresh interval (JPEG) : 10 fps
Image quality (JPEG) : Quality 1

9. Set the items of JPEG(1) as shown below, and then click the Set button.

Image capture size : 640 x 360
Image quality Quality 1 : 5 Normal

Image quality Quality 2 : 8
* If the "Image capture size" setting in JPEG(2) or JPEG(3) is "640 x 360", change it to another
value, and then set the "Image capture size" for JPEG(1).

10. Set the items of H.264(1) as shown below, and then click the Set button.
H.264 transmission: OFF

11. Set the items of H.264(2), H.264(3), and H.264(4) in the same way as in step 10.

12. The settings are thus complete.

2.2. Setting AW-UE70/AW-HE40

1. Start Internet Explorer.