Panasonic aw-pb504n Operation Manual

SDI Card

AW-PB504N

Before attempting to connect, operate or adjust this product,

please read these instructions completely.

Printed in Japan
F1103S0 VQT0H53

D

-2-

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (service) instructions in the
literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.

indicates safety information.

FCC Note:

This device complies with Part 15 of the FCC Rules. To
assure continued compliance follow the attached
installation instructions and do not make any
unauthorized modifications.

This equipment has been tested and found to comply with
the limits for a class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own expense.

This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la class A est conforme à la
norme NMB-003 du Canada.

For CANADA

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER MOUNTING OF THE
OPTIONAL INTERFACE BOARD TO QUALIFIED
SERVICE PERSONNEL.

-3-

CONTENTS

WARNING/CAUTION FOR SAFETY ...................................................................................... 4

PREFACE .............................................................................................................................. 5

PRECAUTIONS ..................................................................................................................... 5

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ............................................... 6

MOUNTING ........................................................................................................................... 7

CONNECTION ....................................................................................................................... 9

APPEARANCE ....................................................................................................................... 10

SPECIFICATIONS .................................................................................................................. 11

STANDARD ACCESORIES .................................................................................................... 11

-4-

WARNING/CAUTION FOR SAFETY

WARNING

• Refer all servicing to qualified personnel

To reduce the risk of electric shock, don't remove
cover or back, unless you are a qualified personnel.
Refer all mountings, connections, servicing to
qualified service personnel.

• No water or moisture inside

Do not let water or moisture into the product, or
expose it to moisture, to prevent a fire and electric
shock.

• If you see smoke or smell an odor from the product,
if water or other foreign matter gets inside, if it is
damaged by dropping, or if you find anything wrong
with it, immediately stop using it.

• Do not disassemble or modify the product to
prevent a fire and electric shock.

CAUTION

• Do not drop the product, do not expose it to strong
shock, or do not step on it, to prevent a fire and
injuries.

• Do not install the product at a place full of moisture
and dust, which may cause a fire and electric
shock.