Panasonic AWHR140PJ User Manual
AW-HR1 40
Full-HD Outdoor Integrated Camera
ScheduledforreleaseinSummer2017
Compatible with various
outdoor environments
and applications
o
alt
Outdoor integrated remote camera that maintains stable
recording performance in the toughest of environments
Outdoor housing and camera, lens, and pan head are integrated in this
remote camera system.
The camera is equipped with the same Digital Signal Processor (DSP)
and 1/2.86 type full HD 3MOS sensors as in the AW-HE130W/K. High
sensitivity, high S/N ratio, and high resolution are achieved by advanced
video processing.
In addition to the functions of the AW-HE130W/K, mechanisms needed
for shooting outdoors are enhanced as well. Flexible operation is
achieved by features compatible with tough outdoor environments such
as resistance to water and dust, wind pressure, and severe salt damage,
as well as hot environments.
1/2.86-type 3MOS sensors
for high-level video capture and production.
Equipped with the same 1/2.86-type full HD 3MOS sensors and DSP
(Digital Signal Processor) as AW-HE130W/K, AW-HR140 realizes high
sensitivity, a high S/N ratio and high resolution through the use of
advanced video processing.
High Performance 20x Zoom Lens/1.4x Digital Extender Zoom
In addition to a sharp, fast F1.6, 20x optical zoom lens, the AW-HR140 is
equipped with an innovative 1.4x digital extender that can increase the
effective focal length of the lens by 40% while delivering smooth, high
resolution video.
x1.4
*Images are simulated
Haze Reduction Function
For installations in places where haze tends to occur, this function performs
correction for a subject with low contrast to make the image clearer.
Three settings can be selected for the compensation level.
・White-tinged images are reduced and overall contrast is improved.
・
Intensit y of haze reduction effect can be adjusted manually according to the densit y of haze.
・
Haze reduction level can be selected from three stages: low, mid, and high.
Resistance to severe salt damage and compatibility
with hot environments
Aluminum and other metal parts are coated to protect against severe salt
damage, enabling installation in seaside areas subject to salt air. PTB/PPS
plastic is employed for the exterior, giving excellent heat resistance.
PBT (Polybutylene Terephthalate): Excellent long-term thermal stability
PPS (Polyphenylene Sulde): High heat resistance and excellent abrasion resistance
e t
severe salt damage and compatibility
ronments
ther metal parts are coated to protect against severe s
Defroster for temperatures down to -15 ºC (5 ºF)
Frosting, icing, and condensation are prevented by heating in environments
as cold as -15 ºC (5 ºF). Even in blizzards, snow that hits the glass surface
melts off to maintain visibility.
Equipped to inside
glass surface
Resistance to wind pressure
All functions are guaranteed to operate in wind speeds of up to 15 m/s.
Basic performance is maintained at wind speeds of up to 50 m/s without
destruction of the camera.
2
*Images are simulated
Lens wiper
The lens part is kept clear even when using in harsh
environments. The wiper can be controlled by a
remote camera controller (AW-RP120G/RP50) if
connected to the control terminal of a commercially
available washer unit from the camera’s washer
control terminal.
Wiper
Loading...