Panasonic AK-UC4000GSJ Specifications

Specications

AK-UC4000GJ/UC4000GSJ

Power Supply

Power Consumption

Operating Temperature

Storage Temperature –20 °C to 60 °C (–4 °F to 140 °F)

Operating Humidity 85% or less (relative humidity)

Weight Approx. 4.5 kg (9.90 lb) (body only)

Dimensions (W x H x D)

Pickup Device 11.14 million pixels, MOS x 1

Optical Filter

Lens mount 2/3-type bayonet

Sensitivity

DC 12 V (when using an external power supply)
AC 240 V, 50 Hz/60 Hz (when connecting to an AK-UCU600PJ/
AK-UCU600EJ/AK-UCU600PSJ/AK-UCU600ESJ

119 W (maximum for the camera only, when connecting
to an external 12 V) 360 W (when connecting to an AK­UCU600PJ/AK-UCU600EJ/AK-UCU600PSJ/AK-UCU600ESJ)

–10 °C to 45 °C (14 °F to 113 °F)
(Preheating required under a temperature 0 °C (32 °F) or below)

Body only 151 mm x 267 mm x 371.5 mm
(5-31/32 inches x 10-17/32 inches x 14-21/32 inches)
(excluding protrusions)

CC: 3200 K, 4300 K, 6300 K, Cross, Diffusion
ND: CAP, Clear, 1/4, 1/16, 1/64

Two shooting modes
[HIGH SENS]: F10 (59.94 Hz)/F11 (50 Hz)
[NORMAL]: F6 (59.94 Hz)/F7 (50 Hz)
2000 lx, 3200 K, when white reectivity is 89.9%

As of March, 2018

XLR x 1, 3-pin (female)

)

<MIC 2> terminal

<MIC> terminal (front)

<INTERCOM1> terminal XLR x 1, 5-pin (female)

<INTERCOM2> terminal XLR x 1, 5-pin (female)

<EARPHONE> terminal Stereo mini jack x 1

<OPT FIBER> terminal Optical composite connector x 1, Tajimi/LEMO

<LENS> terminal 12-pin x 1

<VF> terminal 20-pin x 1

<VF> terminal (rear) 29-pin x 1

<DC IN> terminal XLR x 1, 4-pin, DC 12 V
<DC OUT 12 V 1 A>

terminal
<RET CTRL> terminal 6-pin x 1

<EXT I/O> terminal 20-pin x 1, DC 12 V 0.5 A

<REMOTE> terminal 10-pin x 1

<TRUNK> terminal 12-pin x 1
<DC OUT> terminal 2-pin x 1, DC 12 V 2.5 A
<LAN> terminal RJ-45 x 1
<USB2.0> terminal

(host)
Build-up terminal 20-pin x 1

<LINE>/<MIC>/<–48V> switchable
<LINE>: 0 dBu, +4 dBu menu selection available
<MIC>: –60 dBu, –40 dBu, or –20 dBu menu can be
selected

XLR x 1, 3-pin (female)
Switchable with <MIC 1> terminal

4-pin x 1

Type A connector, DC 5 V 0.5 A

4K: 2000 TV lines or above (center)

Horizontal Resolution

S/N 62 dB or above

Horizontal Modulation 50% or above (27.5 MHz)

Gain switching

Shutter speed

<HD-SDI1> terminal

<HD-SDI2> terminal

<AUX> terminal

AK-UCU600PJ/AK-UCU600EJ/AK-UCU600PSJ/
AK-UCU600ESJ output
HD: 1000 TV lines or above (center)

[NORMAL]: −6, −3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36
[HIGH SENS]: −6, −3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36

•

[59.94i]/[59.94p] mode: 1/100, 1/120, 1/125, 1/250,
1/500, 1/1000, 1/1500, 1/2000

•

[29.97p] mode: 1/48, 1/50, 1/60, 1/96, 1/100,
1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000

•

[23.98p] mode:
1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000

•

[50i]/[50p] mode: 1/60, 1/100, 1/125, 1/250, 1/500,
1/1000, 1/1500, 1/2000

•

[25p] mode:
1/250, 1/500, 1/1000, 1/1500, 1/2000

BNC x 1
3G/1.5G-SDI: 0.8 V [p-p], 75 Ω

BNC x 1
3G/1.5G-SDI: 0.8 V [p-p], 75 Ω

BNC x 1
Functions as <HD TRUNK>
terminal/<PROMPTER2> terminal by switching
the setting in the menu
<HD TRUNK>: 1.5G-SDI: 0.8 V [p-p], 75Ω
<PROMPTER2>: VBS signal 1 V [p-p], 75 Ω

1/48, 1/50, 1/60, 1/96,

1/48, 1/50, 1/60, 1/96,

Rear View

1/100,

1/100, 1/125,

<

G/L IN/PROMPTER OUT

terminal

<MIC 1> terminal

BNC x 1
<G/L IN>: Tri-level SYNC or BB (black burst)
<PROMPTER OUT>: VBS signal 1 V [p-p], 75 Ω

>

Functions as <G/L IN> when standalone, and as
<PROMPTER OUT> when connecting to an
AK-UCU600PJ/AK-UCU600EJ/AK-UCU600PSJ/
AK-UCU600ESJ

XLR x 1, 3-pin (female)
<LINE>/<MIC>/<+48 V> switchable For <MIC>,
<FRONT>/<REAR> switchable
<LINE>: 0 dBu, +4 dBu menu selection available
<MIC>: –60 dBu, –40 dBu, or –20 dBu menu can be
selected

8

Specications

As of March, 2018

AK-UCU600PJ/UCU600EJ/UCU600PSJ/UCU600ESJ

Power Supply

Power Consumption 500 W (Without camera connected: 90 W)
Capacity for Supplying

Power to a Camera
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 10% to 90% (no condensation)
Weight Approx. 8.8 kg (19.4 lb)

Dimensions (W x H x D)

Video Output

HD TRUNK/TICO Output

Return Input

Prompter Input

Reference Input

Microphone Output 0 dBm/600 Ω, 2 lines (XLR, 3-pin, male)

Communication

AUX

TRUNK

FRONT ROP

REAR ROP

MSU

LAN TRUNK

LAN

3

*

AK-UCU600PJ/AK-UCU600PSJ: 100 V - 120 V AC, 50 Hz/60 Hz
AK-UCU600EJ/AK-UCU900ESJ: 100 V - 240 V AC, 50 Hz/60 Hz

240 V AC (tolerance: 5%), 1.46 A , 50 Hz/60 Hz

424 mm x 88 mm x 401 mm (
x 15-13/16 inches

3G/HD/SD-SDI: 7 lines (embedded audio is supported only for HD signals)
HD/SD-SDI: 1 line (shared with picture monitor output
embedded audio is supported only for HD signals)
Analog composite: 2 lines (

* For details on output formats, see "Supported formats" on page 5.

HD-SDI: 1 line (HD TRUNK output)
3G/HD-SDI: 1 line (TICO output)

3G-HD/HD/SD-SDI: 4 lines (RET1 input has active-through output)
Analog composite: 1 line

HD-SDI:
1 line (with active-through output)
Analog composite:
2 lines (through output of 1 and input of 2 share the connector
It is not terminated when the unit is turned OFF. No through output.

B

B (black burst) / tri-level*2: 1 line
(automatic termination, connect to upper connector; BB signal and
tri-level signal automatically recognized, with loop-through output)

Intercom input/output (ENG / PROD, 0 dBm, 600 Ω (4 W) /
1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM) : 2 lines
PGM input (0 dBm/600 Ω) : 2 lines
Tally input (red, green, yellow) : 1 input each

WFM control
6-bit (open collector output, terminal shared with
camera microphone gain setting*1)
Camera microphone gain setting input
5-bit (photo-coupler input, terminal shared with WFM control
Down-conversion system setting input 2-bit (photo-coupler input)

RS-422 / RS-232C
2 lines

RS-422
1 line, 16 V DC output (only one of this and REAR ROP can
be selected at one time via the menu or the [ROP FRONT/
REAR] selection switch on the front panel)

RS-422
1 line, 16 V DC output (only one of this and FRONT ROP
can be selected at one time via the menu or the [ROP
FRONT/REAR] selection switch on the front panel)

RS-422
1 line, GPI for control

LAN connection with camera side via an optical cable
1 line, 100BASE-T, 1000BASE-T

Personal computer connection for distribution via the Web
1 line, 10BASE-T, 100BASE-TX (use a crossover cable when
connecting directly with a personal computer)

) (excluding protrusions)

1

*

16-5/8 inches x 3-7/16 inches

*1 ;

1 line shared with picture monitor output

*1)

*1)

1

*

*1)

4

*

4

*

AK-HRP1000GJ/HRP1005GJ

AK-HRP1000GJ AK-HRP1005GJ

Power Supply

Power Consumption

Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 90% or less
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Weight Approx. 1.7 kg (3.75 lb) Approx. 1.5 kg (3.31 lb)

Dimensions (W x H x D)

Camera/CCU Control

Maximum Cable Length

12 V DC (Power supply from camera: 10 V - 16 V DC)
42 V - 57 V DC (PoE power supply)

0.51 A (Power supply from
camera: 10 V - 16 V DC)

0.15 A (PoE power supply)

102 mm x 385 mm x 113 mm
(4 inches x 15-3/16 inches x
4-7/16 inches)

Control signals (camera, CCU control)
Power supply 16 V DC (when CCU is connected)*5,
12 V DC (when camera is connected)*

When camera connected: 20 m (65.7 ft)
When CCU is connected: 50 m (164 ft)

0.44 A (

Power supply from

camera: 10 V - 16 V DC

0.11 A (PoE power supply)

82 mm x 355 mm x 124.4 mm
(3-1/4 inches x 14 inches x
4-7/8 inches)

5

)

AK-MSU1000GJ

Power Supply

Power Consumption

Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 90% or less
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Weight Approx. 4.0 kg (8.82 lb)

Dimensions (W x H x D)

Adjustment Functions

CCU Control RS422 or IP
Maximum Cable Length When CCU is connected: 50 m (164 ft)

12 V DC (DC input range: 10 V - 16 V DC)
42 V - 57 V DC (PoE+ power supply)

1.6 A (Power supply: 12 V DC)

0.6 A (PoE+ power supply)

482 mm x 222 mm x 81.5 mm
(18-31/32 inches x 8-3/4 inches x 3-7/32 inches)
(including mounting brackets and dial heights)

Scene le, ND lter, CC lter, Color temperature
(COLOR TEMP), Master gain (MASTER GAIN),
Shutter (SHUTTER), Master pedestal (MPED), Iris
(IRIS), Camera selection

AK-HVF100GJ

Power Supply DC 12 V (supplied from camera or XLR)
Power Consumption 18 W
Operating Temperature 0 °C to 45 °C (32 °F to 113 °F)
Operating Humidity 10% – 85% (no condensation)
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)

Weight

Dimensions (W x H x D)

Display Panel 22.9 cm (9.0 inches)
Number of Pixels 1920 x 1080 (FHD)
Display Color Approx. 16.77 million colors

Operation

Connector

Supported Signal Format

Approx. 2.6 kg (5.73 lbs.) (not including hood) /
Approx. 3.0 kg (6.61 lbs.) (including hood)

340 mm x 234 mm x 193 mm
(13-13/32 inches x 9-7/32 inches x 7-5/8 inches)
(not including hood)
340 mm x 234 mm x 231 mm
(13-13/32 inches x 9-7/32 inches x 9-1/8 inches)
(including hood)

<POWER> switch, <MENU> button, <SELECT>
dial button, <F1>/<F2>/<F3>/<F4> buttons,
<BRIGHT> knob, <CONTRAST> knob,
<PEAKING> knob, <INPUT> switch

Camera I/F connector (D-sub 29 pins x 1)
SDI IN connector (BNC x 1)
DC IN connector (XLR 4 pins x 1)

CAM: 1080/59.94i, 1080/50i
SDI: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i,
720/59.94p, 720/50p

AK-HBU500GJ

Power Supply

Power Consumption

Operating Temperature -10 °C to 45 °C (14 °F to 113 °F)
Operating Humidity Range
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Weight Approx. 12.8 kg (28.22 lb) (unit only)

Dimensions (W x H x D)

Camera Number Display 1 to15 (depending on system settings)
LENS I/F Connector 36-pin x 1
CAMERA I/F Connector 20-pin x 1
[DC IN] Connector XLR x 1, 4-pin, 12 V DC
[DC OUT 12 V 1.5 A]

Connector
[DC OUT 12 V 7.5 A]
Connector

*1: Depending on the setting, only one of them can be selected at one time.
*2: The BB (black burst) signal and tri-level sync signal of the reference input are
recognized automatically.
*3: Requires a firmware upgrade scheduled for release in the fall of 2018.
*4: IP video cannot be transmitted when [CCU MODE] is set to [2160/23.98p],
[2160/23.98PsF], [1080/23.98p], or [1080/23.98PsF].
*5: Can be provided from CCU

12 V DC (when external power is supplied)
240 V AC 50 Hz/60 Hz (when CCU is connected)

70 W (when external power is supplied)
165 W (when

85% or less (relative humidity)

300 mm x 417 mm x 510 mm
(16-7/16 inches x 20-1/16 inches x 11-13/16 inches)

4-pin x 1

XLR x 1, 4-pin

CCU

is connected)

9