Panasonic AK-HC900 User Manual
Panasonic Broadcast
AK-HC900
Menu Information
Setting of Menu Items
_ Configuration of menu display screen
USER MENU
1.MAINTENANCE
2.SETTING
3.CAM ID
4.FILE MENU
USER MENU
Maintenance menu
MAINTENANCE
°°
1.BLACK SHADING
2.PED,GAMMA,FLARE
3.KNEE,WHITE CLIP
4.R/B GAIN
5.DTL
6.GAIN,AUTO IRIS
7.S.GAIN 1
8.S.GAIN 2
9.S.GAIN 3
10.FRAME MODE
11.COLOR CORRECTION1
12.COLOR CORRECTION2
Using condition setting menu
SETTING
°° °°
1.MODE
2.SHUTTER
3.H.PHASE
Camera ID setting menu
CAM ID
°°
°°
ID:AKHC900
File managing & renewing menu
H H FILE MENU
°°
FILE :USER1
(DATA REF :PRESET)
SAVE FILE? :USER1
SAVE :
18
Setting of Menu Items
_ USER menu (Initial screen)
USER MENU
1.MAINTENANCE
2.SETTING
3.CAM ID
4.FILE MENU
Menu operation is executed by the HD Controller AK-HRP900.
The readout data at start of power supply is
the data just before cutting off the power
supply, and the operation is started with the
data.
1. MAINTENANCE
It sets various adjusting data.
2. SETTING
It sets various modes.
3. CAM ID
It sets the camera ID.
4. FILE MENU
It executes file loading and saving, and
makes the basic setting of data display.
19
Setting of Menu Items
! Maintenance menu
MAINTENANCE
°°
1.BLACK SHADING
2.PED,GAMMA,FLARE
3.KNEE,WHITE CLIP
4.R/B GAIN
5.DTL
6.GAIN,AUTO IRIS
7.S.GAIN 1
8.S.GAIN 2
9.S.GAIN 3
10.FRAME MODE
11.COLOR CORRECTION1
12.COLOR CORRECTION2
°BLACK SHADING
DETECTION
CORRECT(DIG) :ON
°
≥ Move the cursor (arrow mark) to the item
to be adjusted and press the MENU key,
then it enters the adjustment menu thereunder.
≥ Move the cursor to MAINTENANCE and
press the MENU key, then it returns to
USER MENU.
1 Black shading correction menu
≥ When MENU key is pressed at DE-
TECTION, (BLK-SHD:ACTIVE) appears, then the lens is automatically
stopped down and ABB operation is
executed.
≥ When CORRECT (DIG) is turned ON,
horizontal and vertical shading correction is automatically executed.
When it is turned OFF, the current value
is maintained.
≥ Move the cursor to “BLACK SHADING”
and press the MENU key, then it returns to MAINTENANCE MENU.
Note:
It takes about 90 sec. until completion of
black shading correction.
20
Setting of Menu Items
! Maintenance menu
PED,GAMMA,FLARE
°° °°
M PED :+027
R PED :+000
B PED :+000
M GAMMA :0.45
R GAMMA :+00
B GAMMA :+00
R FLARE :010
G FLARE :000
B FLARE :017
GAMMA :ON
FLARE :ON
2 Pedestal, gamma, flare adjustment
menu
M PED: Master pedestal can be adjusted
only by turning the control panel VR.
The R, G, B pedestal can be totally adjusted.
R, B PED: R, B pedestal adjustment.
Besides the master pedestal adjustment,
R, B pedestal can be independently adjusted. It is not related to DATA REF. The
numeral display after normal ending of
ABB is “0” for both of R, B.
M GAMMA: Master gamma adjustment.
The R, G, B gamma can be totally adjusted.
R, B GAMMA: R, B gamma adjustment.
Besides the master gamma adjustment,
R, B gamma can be independently adjusted.
R FLARE: R flare adjustment
G FLARE: G flare adjustment
B FLARE: B flare adjustment
GAMMA: Gamma ON/OFF setting
FLARE: Flare ON/OFF setting
21
Loading...