Superior usability for HD video production
at 720p, 1080i or 1080p with high speed
shooting capability and 24p production
AK-HC5000 HD Studio Camera allows for superior 1080p video & 4x high-speed
shooting for vivid imaging for capturing exciting moments in sports and events.
The state-of-the-art 3MOS sensors from constantly evolving EFP/ENG production camcorders are now available in a studio camera
1080p 4x high-speed shooting included as standard function
The AK-HC5000 camera system has a high-speed shooting function that adds rich
expressions to video content production. High speed shooting at up to 240 fps is
achieved with four interleaved 1080p 3G SDI outputs, compatible with leading slow
motion playback servers.
* Image is simulated.
1
*
Newly developed 2/3-type MOS sensor
High-image-quality video production is realized with the newly developed
2/3-type MOS sensor. (See below chart for the supported video format.)
List of supported formats*
(3G-SDI)
HD
High-Speed(
SD
*1:
To obtain the 1/4 slow effect, a device to separately record 1080/239.76p, 200p is necessary.
*2: AK-UCU500 Camera Control Unit (CCU) outputs 4x HD/HD/SD video.
3G-SDI x 4
2
)
Control via serial or IP mode
CCU, Serial Mode
1080/59.94p, 50p, 59.94i, 50i, 23.98p over 59.94i,
29.97PsF, 25PsF, 23.98PsF, 720/59.94p, 50p
1080/239.76p, 200p, 239.76i, 200i
480/59.94i, 576/50i
AK-HC5000GJ/GSJ
AK-HC5000GJ/GSJ
AK-HC5000GJ/GSJ
Optical Fiber
Optical Fiber
Optical Fiber
AK-UCU500
AK-UCU500
AK-UCU500
CCU, IP Mode
Serial Connection
IP Connection
(PoE Hub)
AK-HRP1000GJ
AK-HRP1000GJ
AK-HRP1000GJ
or
AK-HRP1005GJ
or
AK-HRP1005GJ
or
AK-HRP1005GJ
2
Page 4
AK-HC5000 Key Features
High-quality video and excellent operability
With the AK-UCU500 Camera Control Unit (CCU), uncompressed longdistance transmission of 4K/HD video signals via optical fiber is supported.
The AK-HRP1000GJ/1005GJ Remote Operation Panel (ROP) is equipped with
a color LCD display that provides excellent visibility. In combination, this
system achieves high-quality video and excellent operability. In cases where
power is supplied by the CCU, it is possible to transmit at a long distance of
up to approx. 2,000 m between the camera and the CCU. The distance can
be extended up to 10,000 m
*1 by providing a local power supply at the
camera head and using general-purpose single mode optical fiber. Between
the CCU and the ROP, in addition to a dedicated serial line, IP connection via
LAN cable is also supported.
High sensitivity and low noise
The AK-HC5000 is equipped with a 2/3-type 3MOS sensor, and it also has two
shooting modes to choose from. In High Sense Mode, it achieves F10 59.94p
and F11 50p high sensitivity and low noise with an S/N ratio of 60 dB or higher.
Skew reduction realized through high-speed scans
Building on the knowhow accumulated in Panasonic's ENG camera
experience, the skewing characteristic of MOS sensors has been reduced by
reading out the MOS sensor signal at high speed.
Skew reduction images
Without compensation
Dynamic Range Stretch (DRS) function
3
*
The DRS function automatically suppresses blocked shadows and blown
highlights. When dark and bright areas are mixed in the same scene, such as
when looking outside from indoors, DRS can maintain a high level of
gradation expression in dark, bright, and intermediate tones, thereby
minimizing blocked shadows, blown highlights, and washed out colors. This
makes it possible to obtain visually wide dynamic range video in real time.
Images showing DRS (Dynamic Range Stretch) effect
Blocked shadows occur
DRS OFF
Blown highlights occur
DRS ON
* Images are simulated.
Selectable gamma curves
In addition to the Film Rec Gamma functions (V-REC, F-REC) supporting
digital film production, you can select the Filmlike 1/2/3 modes. They produce
natural gradations and rich color reproduction with a film-like quality.
With compensation
* Images are simulated.
Chromatic Aberration Compensation (CAC)
This exclusive technology utilizes communication between the lens and
camera to deploy for a sophisticated algorithm that will automatically
compensate for the registration error caused by lens chromatic aberration,
and minimize the circumjacent blur.
Images showing CAC (Chromatic Aberration Compensation) function effect
CAC OFFCAC ON
2
*
HDR (High Dynamic Range) compatibility
This mode enables the camera to apply an alternative optical electro transfer
function (OETF) to selected camera outputs so that the camera can provide a
high dynamic range (HDR) image for capable displays or function in a complete
HDR live broadcast system. HDR displays use their increased brightness and
contrast capabilities to take advantage of the cameras full dynamic range to
deliver compelling high contrast images with very bright highlights.
Shockless gain
It is possible to smoothly transition the image changes that occur when gain
is changed. In addition, with the 0.1 dB step master gain adjustment function,
you can fine tune the adjustments to match the scene being shot.
Diverse color correction functions
In addition to EBU and NTSC preset color matrix, camera users can save two custom
specified linear matrix tables, and additionally tune the saturation and hue individual
colors with 12-pole color correction system. Specific skin tones can also be adjusted
in addition to the primary secondary and tertiary colors in the 12-pole system.
Skin Tone Detail Correction
T
one down wrinkles and blemishes in on air personalities to beautifully shoot natural
skin tones. While designed to soften skin tones the skin tone detail feature can be
applied to any hue phase so it could likewise be used to soften areas of other colors
(such as green grass). The skin tone detail feature can define three independent skin
tone ranges to manage different light levels or different people on camera. Skintone-get feature finds a specific color in frame to simplify the set up process.
Images showing Skin Tone Detail Correction effect
No correction
* Images are simulated.
3
*1: Adverse conditions, additional patching and longer runs will require repeater devices. *2: For software supporting
Chromatic Aberration Compensation (CAC) file, please download from "Software download" on Panasonic website:
http://pro-av.panasonic.net/en/ *3: Only when in HD mode.
* Images are simulated.
Correction
Page 5
Servo control ND / CC filters
The cameras are equipped with filters for a variety of shooting environments.
[ND filters
[CC filters
] CAP, Through, 1/4, 1/16, 1/64
] Cross, 3200 K, 4300 K, 6300 K, Diffusion
Focus assist functions
Quick and accurate focusing is supported with focus assist functions such as
Focus Bar (indicates focus level), Focus-in-Red (uses color to indicate areas in
focus), MAG (magnifies central portion), and Square (shows focus status of
screen as a whole). Lenses with auto focus and focus assist capabilities are
also supported
Focus assist function examples
*1.
Focus-in-Red
MAG
Detailed settings and functions optimized for
operability
Color temperature display and adjustment function (2000 K to 15000 K
variable).
Transmission of up to 10,000 m possible using single fiber.*
It is possible to save camera settings, such as video adjustments, on
an SD memory card. Firmware version upgrades are also supported.
A lens file function to save flare and shading values.
Support for IP streaming and IP control.
The NewTek Software “NewTek AutoLink for Panasonic PTZ”*4, which is
available on the Internet, allows Panasonic professional cameras equipped
with IP streaming to be automatically detected from NewTek TriCaster® and
IP series Video Mix Engine on the network, enabling direct use of IP streaming
from the cameras with these NewTek products
.
DC12 V 2.5 A and 1.0 A output as a standard feature. This can be used as a
power source for large lenses, prompters, and sub-monitors.
There are four user buttons (enabling function selection) on the camera head
and four on the viewfinder. They support rapid shooting by the camera
operator.
3
Focus Square
Doll in focus
Panel in focus
Camera standalone output formats
For camera head output (HD SDI 1/HD SDI 2), it is possible to select 1080p,
1080i, and 720p.
Extensive video and data transmission (TRUNK)
functions
Since video and data can be transmitted between the camera and a Camera
Control Unit (CCU) using optical fiber cable alone, system expansion to match
operation conditions is possible.
HD SDI (CCU camera) two lines, VBS (CCU camera) two lines: Can be
used for monitoring with prompter
monitor), etc.
HD SDI (camera CCU) one line*2: This line can be used to transmit an
additional video signal of a handheld or remote camera to the studio.
Since the camera video input is equipped with a frame synchronizer,
asynchronous video signals can also be used.
LAN (1000BaseT)*2 one line: To be used to control external devices and remote
cameras by IP protocol. Transmission of streaming video is also supported.
DATA (RS422A or RS232C) two lines: Can be used to transfer lens and
pedestal position data in a virtual system.
, fixed return
or camera (studio floor
Intercom connection
With two independent intercom lines, in addition to Intercom 1 and Intercom
2 switching, an Intercom 1 and 2 mix mode has been added and can be
selected to observe the situation. With the Intercom front/rear switch and
front volume, it is possible to adjust the intercom audio level even when the
camera is being used from the shoulder.
Intercom Operation Panel
New slanted-line design improves mobility and
operability
The functional layout of controls improves ease of use and operator
performance. The low profile body design, along with the low center of
gravity, enhances right side visibility and comfort for the operator. The
shoulder pad can be in a 24 mm range so you can increase shooting stability
by adjusting the balance when lens weight changes.
HD SDI
(
FixedReturn
HD SDI
(PROMPT)
VBS 1
VBS 2
HD SDI 1
(InternalFS)
LAN
1000BaseT
(
DATA 1
RS422A
or
RS232C
DATA 2
RS422A
or
RS232C
)
)
Optical ber cable
HD SDI
(
FixedReturn
HD SDI
(PROMPT)
VBS 1
VBS 2
HD SDI 1
LAN
1000BaseT
(
DATA 1
RS422A
or
RS232C
DATA 2
RS422A
or
RS232C
)
)
*1: For the compatible lenses, please contact the manufacturer.
*2: Cannot be utilized when the camera system is UHD(4K) and HD high-speed mode is used.
*3: Adverse conditions, additional patching and longer runs will require repeater devices.
*4: For more details, please visit the following website
(http://pro-av.panasonic.net/en/products/newtek_autolink/).
The same AK-UCU500 supports both the AK-UC3000
4K capable camera and the AK-HC5000 HD high
speed camera, as do the other main camera
accessories, so production rental companies have
flexibility in preparing a camera rental or fly-pack.
Rear View
AK-HRP1000GJ
AK-HRP1005GJ
Remote Operation Panel (ROP)
Expand operation scope with two size options: a
full operation panel and a simplified panel. These
compact operation panels also support PoE
control.
3
*
and IP
Optical fiber transmission of uncompressed video signals over a distance
of approx. 2,000 m between camera and CCU*1.
The compact, lightweight unit measures 2U in height and is rack-
mountable.
Supported formats
HD (3G-SDI) : 1080/59.94p, 50p, 59.94i, 50i, 23.98p over 59.94i,
29.97PsF, 25PsF, 23.98PsF, 720/59.94p, 50p
HD High Speed(3G-SDI x 4)*
SD : 480/59.94i, 576/50i
Supports IP streaming (100 Base-T).
SD memory card can be used for saving user files and updating
firmware versions.
Input/output
SDI OUT x 7, SDI OUT (PM) x 1, VBS x 1, etc.
*HS MODE*2 : SDI OUT x 4 (HS), SDI OUT x 3, SDI OUT (PM) x 1, VBS x 1, VBS (PM) x 1
RET Input (SDI: 4ch, VBS: 1ch) etc.
LAN-TRUNK (100/1000BASE-T)
PROMPT Input (SDI : 1ch, ANALOG : 2ch)
*1: When power is supplied from CCU.
*2: When Connected with AK-HC5000 HD Studio Camera.
*3: Abbreviation of Power over Ethernet.
2
: 1080/239.76p, 200p, 239.76i, 200i
AK-HRP1000GJ
AK-HRP1005GJ
Rear View
AK-HRP1005GJ
AK-HRP1000GJ
Two models
LCD panels with enhanced visibility.
AK-HRP1000GJ: 8.9 cm (3.5 inches) (VGA)
AK-HRP1005GJ: 8.1 cm (3.2 inches) (VGA)
Camera serial control and IP control (RJ45 LAN cable) are possible.
Supports PoE*3, which can supply power via LAN cable (CAT5e or faster).
Functions for studio camera scene file registration and retrieval.
Equipped with SD memory card slot for saving user files, scene file and
updating firmware versions.
: 1/4 rack size (
AK-HRP1000GJ
) and 1/5 rack size (
AK-HRP1005GJ
).
5
Page 7
As of April, 2017
AK-HVF100GJ
22.9 cm (9 inches) LCD Color Viewfinder
Equipped with newly designed tilt
mechanism and extensive functions
such as focus assist and external
video input.
High-resolution 22.9 cm (9 inches) color LCD panel
displays full HD 1920
Focus assist functions (Focus-in-Red, Focus Bar*1)
Detail depends on zoom ratio*
External HD-SDI (3G SDI) input
External DC input (+12 V DC)
Four assignable function buttons
Contrast, brightness, and peaking are adjustable
Pan, tilt, and lift structure used
*1: When connected to AK-HC5000.
x
1080 pixels
1
AK-MSU1000GJ
Master Setup Unit (MSU)
Lift structure image
Rear View
Moves up
and down
Controls up to 99 CCU units via IP
IP and serial connections supported.
IP connection: Up to 99 units
Serial connection: Up to six units
7-inch Touch Panel LCD
Video monitoring function
HD SDI Input (Monitoring) (1080i)
Power DC12 V(DC10 V - DC17 V) or PoE+ (via PoE+ Hub)
Side Panel
AK-HBU500GJ
Build-up Unit
Enables use of large
studio-use lens.
Rear View
Rear control panel
Smooth camera mounting/removal possible
Precise optical axis (horizontal/vertical) adjustment structure
Rear control panel equivalent to that of a large camera
DC OUT 12V 7.5 A (XLR4-pin)/DC OUT 1.5 A (4-pin)
6
Page 8
Camera System
Other accessories
As of April, 2017
AJ-CVF50G
38.1 mm (1.5 inches) HD EVF
AK-HVF70G
17.8 cm (7 inches) LCD Color
Viewfinder
SHAN-TM700
Tripod Adapter
AJ-HVF21KG
50.8 mm (2 inches) HD EVF
59.94 Hz/50 Hz Switchable
Not available in some areas.
AJ-MC700P
Microphone Kit (monaural)
AG-CVF15G
87.6 mm (3.45 inches) Color HD EVF
Open two ways for LCD monitor viewing
AW-PS551
AC Adaptor
AG-CVF10G
87.6 mm (3.45 inches) Color HD EVF
Open one way for LCD monitor viewing
AJ-C10050G
Remote Control Cable
(50 m / 164 feet)
7
System Configuration
AJ-MC700P
Microphone
AJ-CVF50G/HVF21KG*
HD EVF
2/3-type 4K or HD Lens
Lens operation system
accessories
Studio Zoom Lens
2/3-type 4K or HD Lens
3
1
*
Camera
AK-HC5000
1
*
SD
memory
card
AK-HBU500GJ
Build-up Unit
AK-HVF100GJ
22.9 cm (9 inches) LCD Color Viewnder
Optical Fiber multi Cable
Max. 2,000 m
Tripod Adapter
SHAN-TM700
SD memory card
SD memory card
PoE
HUB
Serial
IP
AK-HRP1000GJ
Remote
Operation Panel
Camera Control Unit
AJ-C10050G
Remote Control Cable*
or
AK-HRP1005GJ
Remote
Operation Panel
AK-UCU500
4
AK-MSU1000GJ
Master Setup Unit
5
Serial*
AJ-C10050G
Remote Control Cable
PoE+
HUB
*1:
For software supporting Chromatic Aberration Compensation (CAC) le,
please download from "Software download" on Panasonic website:
http://pro-av.panasonic.net/en/
*2: A power cable is included with the AC Adaptor.
*3: Not available in some areas.
*4:
With the use of a serial remote control cable AJ-C10050G,
power for ROP is supplied from a CCU.
*5:
When AK-MSU1000 is connected to AK-UCU500 via serial cable,
AW-PS551 or PoE+ HUB is required.
IP
AW-PS551
AC Adaptor
Power Cable*
2
AC
SD
memory
card
Page 9
Specications
AK-HC5000GJ/HC5000GSJ
Power Supply
Power Consumption
Operating Temperature
Storage Temperature–20 °C to 60 °C (–4°F to 140°F)
Operating Humidity85% or less (relative humidity)
Weight
Dimensions (W x H x D)
Pickup Device2/3-type, 2.2 million pixels, MOS x 3
Optical Filter
Lens mount2/3-type bayonet
Sensitivity
Horizontal Resolution1000 TV lines or above (center)
S/N60 dB or above
Horizontal Modulation 50% or above (27.5 MHz)
Gain switching
Shutter speed
<HD SDI1> terminal
<HD SDI2> terminal
<AUX> terminal
<
G/L IN/PROMPTER OUT
terminal
<MIC 1> terminal
DC 12 V (when using an external power supply)
AC 240 V, 50 Hz/60 Hz (when AK-UCU500P/AK-UCU500PS/
AK-UCU500E/AK-UCU500ES is connected)
119 W (maximum, when connecting to an external 12 V
and including supply to an externally connected devices)
360 W (maximum, when AK-UCU500P/AK-UCU500PS/
AK-UCU500E/AK-UCU500ES is connected and including
supply to an externally connected devices)
–10 °C to 45 °C (14°F to 113°F)
(Preheating required under a temperature 0 °C (32 °F) or below)
Approx. 4.4 kg (9.70 lbs.) (body only, excluding the accessories)
Body only 151 mm x 267 mm x 371.5 mm
(5-31/32 inches x 10-17/32 inches x 14-21/32 inches)
(excluding protrusions)
BNC x 1
Functions as <HD TRUNK>
terminal/<PROMPTER2> terminal by switching
the setting in the menu
<HD TRUNK>: HD (1.5G)
<PROMPTER2>: VBS signal 1 V [p-p], 75 Ω
BNC x 1
<G/L IN>: Tri-level SYNC or BB (black burst)
>
<PROMPTER OUT>: VBS signal 1 V [p-p], 75 Ω
Functions as <G/L IN> when standalone, and as
<PROMPTER OUT> when AK-UCU500P/ AK-UCU500PS/
AK-UCU500E/AK-UCU500ES is connected
XLR x 1, 3-pin
<LINE>/<MIC>/<+48 V> switchable For <MIC>,
<FRONT>/<REAR> switchable
<LINE>: 0 dBu, +4 dBu menu selection available
<MIC>: –60 dBu, –40 dBu, or –20 dBu menu can be
selected
As of April, 2017
XLR x 1, 3-pin
<MIC 2> terminal
<MIC> terminal (front)
<INTERCOM1> terminal XLR x 1, 5-pin
<INTERCOM2> terminal XLR x 1, 5-pin
<EARPHONE> terminal Stereo mini jack x 1, 3-pin
<OPT FIBER> terminalOptical composite connector x 1
<LENS> terminal12-pin x 1
<VF> terminal20-pin x 1
<VF> terminal (rear)29-pin x 1
<DC IN> terminalXLR x 1, 4-pin, DC 12 V
<DC OUT 12 V 1 A>
terminal
<RET CTRL> terminal6-pin x 1
<EXT I/O> terminal20-pin x 1, DC 12 V, 0.5 A
<REMOTE> terminal10-pin x 1
<TRUNK> terminal12-pin x
<DC OUT 12 V 2.5 A>
terminal
<LAN> terminalRJ-45 x 1
<USB2.0> terminal
(host)
Build-up terminal20-pin x 1
<LINE>/<MIC>/<–48V> switchable
<LINE>: 0 dBu, +4 dBu menu selection available
<MIC>: –60 dBu, –40 dBu, or –20 dBu menu can be
selected
XLR x 1, 3-pin
Switchable with <MIC 1> terminal
4-pin x 1
2-pin x 1
Type A connector, DC 5 V, 0.5 A
Rear View
8
Page 10
Specications
As of April, 2017
AK-UCU500PJ/UCU500EJ/UCU500PSJ/UCU500ESJ
Power Supply
Power Consumption500 W (Without camera connected: 70 W)
Capacity for Supplying
Power to a Camera
Operating Temperature0°C to 40°C (32°F to 104°F)
Humidity10% to 90% (no condensation)
WeightApprox. 8.8 kg (19.4 lb)
Dimensions (W x H x D)
Video Output
HD TRUNK OutputHD-SDI: 1 line (cannot be used in UHD/HS mode)
AK-UCU500P/AK-UCU500PS: 100 V - 120 V AC, 50 Hz/60 Hz
AK-UCU500E/AK-UCU500ES: 100 V - 240 V AC, 50 Hz/ 60 Hz
240 V AC (tolerance: 5%), 1.46 A , 50 Hz/60 Hz
424 mm x 88 mm x 401 mm (
x 15-13/16 inches
3G/HD/SD-SDI: 7 lines (embedded audio is supported only for HD signals)
HD/SD-SDI: 1 line (shared with picture monitor output
embedded audio is supported only for HD signals)
Analog composite: 2 lines (
3G-HD/HD/SD-SDI: 4 lines (RET1 input has active-through output)
Analog composite: 1 line
HD-SDI:
1 line (with active-through output)
Analog composite:
2 lines (through output of 1 and input of 2 share the connector
It is not terminated when the unit is turned OFF. No through output.
B
B (black burst) / tri-level*2: 1 line
(automatic termination, connect to upper connector; BB signal and
tri-level signal automatically recognized, with loop-through output)
Intercom input/output (ENG / PROD, 0 dBm, 600 Ω (4 W) /
1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM) : 2 lines
PGM input (0 dBm/600 Ω) : 2 lines
Tally input (red, green, yellow) : 1 input each
WFM control
6-bit (open collector output, terminal shared with
camera microphone gain setting*
Camera microphone gain setting input
5-bit (photo-coupler input, terminal shared with WFM control
Down-conversion system setting input 2-bit (photo-coupler input)
RS-422 / RS-232C
2 lines
RS-422
1 line, 16 V DC output (only one of this and REAR ROP can
be selected at one time via the menu or the [ROP FRONT/
REAR] selection switch on the front panel)
RS-422
1 line, 16 V DC output (only one of this and FRONT ROP
can be selected at one time via the menu or the [ROP
FRONT/REAR] selection switch on the front panel)
RS-422
1 line, GPI for control
LAN connection with camera side via an optical cable
1 line, 100BASE-T, 1000BASE-T
Personal computer connection for distribution via the Web
1 line, 10BASE-T, 100BASE-TX (use a crossover cable when
connecting directly with a personal computer)
) (excluding protrusions)
1
*
16-5/8 inches x 3-7/16 inches
*1 ;
1 line shared with picture monitor output
*1)
1
*
1
)
*1)
*
*
AK-HRP1000GJ/HRP1005GJ
AK-HRP1000GJAK-HRP1005GJ
Power Supply
Power Consumption
Operating Temperature0°C to 40°C (32°F to 104°F)
Humidity90% or less
Storage Temperature-20°C to 60°C (-4°F to 140°F)
WeightApprox. 1.7 kg (3.75 lb)Approx. 1.5 kg (3.31 lb)
Dimensions (W x H x D)
Camera/CCU Control
Maximum Cable Length
12 V DC (Power supply from camera: 10 V - 16 V DC)
42 V - 57 V DC (PoE power supply)
0.51 A (Power supply from
camera: 10 V - 16 V DC)
0.15 A (PoE power supply)
102 mm x 385 mm x 113 mm
(4 inches x 15-3/16 inches x
4-7/16 inches)
Control signals (camera, CCU control)
Power supply 16 V DC (when CCU connected)*4,
12 V DC (when camera connected)*
When camera connected: 20 m (65.7 ft)
When CCU connected: 50 m (164 ft)
0.44 A (
Power supply from
camera: 10 V - 16 V DC
0.11 A (PoE power supply)
82 mm x 355 mm x 124.4 mm
(3-1/4 inches x 14 inches x
4-7/8 inches)
4
AK-MSU1000GJ
Power Supply
Power Consumption
Operating Temperature0°C to 40°C (-4°F to 140°F)
Humidity90% or less
Storage Temperature-20°C to 60°C (-4°F to 140°F)
WeightApprox. 4.0 kg (8.82 lb)
Dimensions (W x H x D)
*1)
Adjustment Functions
CCU ControlRS422 or IP
Maximum Cable LengthWhen CCU connected: 50 m (164 ft)
12 V DC (DC input range: 10 V - 16 V DC)
42 V - 57 V DC (PoE+ power supply)
1.6 A (Power supply: 12 V DC)
0.6 A (PoE+ power supply)
482 mm x 222 mm x 81.5 mm
(18-31/32 inches x 8-3/4 inches x 3-7/32 inches)
(including mounting brackets and dial heights)
Scene file, ND filter, CC filter, Color temperature
(COLOR TEMP), Master gain (MASTER GAIN),
Shutter (SHUTTER), Master pedestal (MPED), Iris
(IRIS), Camera selection
AK-HVF100GJ
Power SupplyDC 12 V (supplied from camera or XLR)
Power Consumption18 W
Operating Temperature0 °C to 45 °C (32 °F to 113 °F)
Operating Humidity10% – 85% (no condensation)
Storage Temperature-20 °C to 60 °C (-4 °F to 140 °F)
Weight
Dimensions (W x H x D)
Display Panel 9.0 inches
Number of Pixels1920 x 1080 (FHD)
Display ColorApprox. 16.77 million colors
Operation
3
3
)
Connector
Supported Signal Format
AK-HBU500GJ
Power Supply
Power Consumption
Operating Temperature-10°C to 45°C (14°F to 113°F)
Operating Humidity Range
Storage Temperature-20°C to 60°C (-4°F to 140°F)
WeightApprox. 12.8 kg (28.22 lb) (unit only)
Dimensions (W x H x D)
Camera Number Display1 to15 (depending on system settings)
LENS I/F Connector36-pin x 1
CAMERA I/F Connector20-pin x 1
[DC IN] ConnectorXLR x 1, 4-pin, 12 V DC
[DC OUT 12 V 1.5 A]
Connector
[DC OUT 12 V 7.5 A]
Connector
*1: Depending on the setting, only one of them can be selected at one time.
*2: The BB (black burst) signal and tri-level sync signal of the reference input are
recognized automatically.
*3: IP video cannot be transmitted when [CCU MODE] is set to [2160/23.98p],
[2160/23.98PsF], [1080/23.98p], or [1080/23.98PsF].
*4: Can be provided from CCU
Approx. 2.6 kg (5.73 lbs.) (not including hood) /
Approx. 3.0 kg (6.61 lbs.) (including hood)
340 mm x 234 mm x 193 mm
(13-13/32 inches x 9-7/32 inches x 7-5/8 inches)
(not including hood)
340 mm x 234 mm x 231 mm
(13-13/32 inches x 9-7/32 inches x 9-1/8 inches)
(including hood)
<POWER> switch, <MENU> button, <SELECT>
dial button, <F1>/<F2>/<F3>/<F4> buttons,
<BRIGHT> knob, <CONTRAST> knob,
<PEAKING> knob, <INPUT> switch
Camera I/F connector (D-sub 29 pins x 1)
SDI IN connector (BNC x 1)
DC IN connector (XLR 4 pins x 1)
CAM: 1080/59.94i, 1080/50i
SDI: 1080/59.94p, 1080/50p, 1080/59.94i,
1080/50i, 720/59.94p, 720/50p
12 V DC (when external power is supplied)
240 V AC 50 Hz/60 Hz (when AK-UCU500 is connected)
70 W (when external power is supplied)
165 W (when AK-UCU500 is connected)
85% or less (relative humidity)
300 mm x 417 mm x 510 mm
(16-7/16 inches x 20-1/16 inches x 11-13/16 inches)
4-pin x 1
XLR x 1, 4-pin
9
Page 11
Dimensions
82 (3-1/4)
342 (13-7/16)
355 (14)
Φ5
78 (3-1/16)
66.9 (2-5/8)
44.7
(1-3/4)
70.5 (2-3/4)
325 (12-13/16)
124.4 (4-7/8)
88.5
12.5
AK-HC5000GJ/HC5000GSJ
151 (5-31/32)
86 (3-13/32)
65 (2-9/16)
As of April, 2017
Unit: mm(inches)
216 (8-17/32)
176.7 (6-31/32)
105 (4-5/32)
7.5 (5/16)
AK-UCU500PJ/EJ/PSJ/ESJ
400 (15-3/4)
424 (16-5/8)
465(18)
76.2(3)
5.9(1/4)
29(1-1/8)
7.2(5/16)
6(1/4)
19(3/4)
50(1-15/16)
10.3(3/8)
48 (1-7/8)
323.4 (12-3/4)
335.3 (13-7/32)
371.5 (14-21/32)
TAJIMI
19(3/4)
28(1-1/8)
LEMO
401(15-13/16)
53.2(2-1/8)
22(7/8)
88(3-7/16)
88(3-7/16)88(3-7/16)
(3-1/2)
101(4)
(1/2)
12.5
(1/2)
0.5
0.5(1/32)
(1/32)
267 (10-17/32)
193 (7-5/8)
AK-HRP1000GJ
102(4)
385(15-3/16)
371(14-5/8)
Φ5
AK-HRP1005GJ
66(2-5/8)
55(2-3/16)
(1-1/4)
113(4-7/16)
31.9
67.5(2-5/8)
355(14)
AK-MSU1000GJ
146.1 (5-25/32)
AK-HBU500GJ
300(11-13/16)
482 (18-31/32)
465 (18-5/16)
400.6 (15-25/32)
417(16-7/16)
510(20-1/16)
19.5 (25/32)
10 (13/32)10 (13/32)
81.5 (3-7/32)
7 (9/32)
222 (8-3/4)
146.1 (5-25/32)
62 (2-15/32)
28 (1-1/8)
AK-HVF100GJ
340 (13-13/32)
193 (7-5/8)
234 (9-7/32)
10
Page 12
Please refer to the latest Non-linear Compatibilty Information, P2 Support, Download and
Service Information, etc. at the following Panasonic web site.
[Countries and Regions]
2-15 Matsuba-cho, Kadoma, Osaka 571-8503 Japan
http://pro-av.panasonic.net/
Argentina +54 11 4122 7200
Australia +61 (0) 2 9491 7400
Brazil +55 11 3889 4035
Canada +1 905 624 5010
China +86 10 6515 8828
Hong Kong +852 2313 0888
Czech Republic +421 (0) 903 447 757
Denmark +45 43 20 08 57
Egypt +20 2 23938151
Finland, Latvia, Lithuania, Estonia
+358 (9) 521 52 53
France +33 (0) 1 47 91 64 00
Germany, Austria, Switzerland
+49 (0) 6103 313887
Greece +30 210 96 92 300
Hungary +36 (1) 382 60 60
India +91 1860 425 1860
Indonesia +65 6277 7284
Iran
(Vida) +98 21 2271463
(Panasonic Office)
Italy +39 02 6788 367
Jordan +962 6 5859801
Kazakhstan +7 727 298 0891
Korea +82 2 2106 6641