Palm TREO ULTRA LIGHT WIRELESS HEADSET, ULTRALIGHT WIRELESS HEADSET User Manual
User Guide
Palm®Ultralight Wireless Headset
Table of Contents
Palm® Ultralight Wireless Headset............................................... 1
Package contents ......................................................................... 2
Charging your headset ................................................................. 3
Pairing your headset with your Bluetooth smartphone ................ 7
Turning your headset on and off ................................................ 10
Wearing your headset on your left or right ear .......................... 11
Using your headset .................................................................... 15
Making a call .............................................................................. 16
Answering a call ......................................................................... 17
Using auto answer ..................................................................... 18
Muting a call............................................................................... 19
What do the colored flashes and tones mean? ......................... 20
Advanced features ..................................................................... 21
Common questions.................................................................... 22
Customer support for your headset ........................................... 23
Caring for your headset.............................................................. 23
Glossary ..................................................................................... 24
Important battery safety information ......................................... 25
Product regulatory information .................................................. 26
ii
Palm® Ultralight Wireless Headset
Palm® Ultralight Wireless Headset
Before getting started, please review the safety booklet included in your
package.
Thank you for purchasing the Palm
be delighted with its operation.
Please read this guide to get started and make the best use of your headset’s
many features.
[!]
IMPORTANT
the driver, and this may increase the likelihood of an accident. When using the
phone while driving, keep conversations short and do not make notes or read
documents. Before answering calls, consider your circumstances. Pull off the
road and park before making or answering calls when driving conditions require
it—for example, bad weather, high traffic density, the presence of children in the
car, or difficult junctions or maneuvers. Always follow local laws.
What you’ll learn to do in this guide:
• Charge your headset and turn it on
• Switch between wearing your headset on your left or right ear
• Make, answer, and end a call
• Use the mute feature
• Use advanced features
Using a mobile phone while driving creates a distraction to
®
ultralight wireless headset. We hope you will
[*]
NOTE
Read the Glossary
important terms.
Palm®ultralight wireless headset 1
at the end of this guide to familiarize yourself with
Package contents
Package contents
Storage
case
Headset
carrying
pocket
Battery
holder
Charging
adapter*
* Use only the charger provided with your Palm® TreoTM smartphone and the charging
adapter provided.
** This is a AAA battery-powered charger that can be used to recharge your headset.
*** Replace the battery with only a nonrechargeable AAA battery.
2 Palm
Headset with a
built-in rechargeable
battery
Indicator light
Call control button
Volume/DSP/mute
button
Microphone
Battery
charger**
AAA
battery***
Earloop
®
ultralight wireless headset
Small,
medium,
and large
soft-gel
ear tips
Charging your headset
Charging your headset
Your headset contains a rechargeable battery that you must fully charge before
using it for the first time. You can use your fully charged headset for up to three
hours before it needs to be recharged.
There are two ways you can charge your headset:
With the AC charger provided with your Treo smartphone The charging adapter
included with your headset works only with the AC charger provided with your
Treo smartphone or replacement Palm branded AC charger, which can be
purchased separately.
[!]
IMPORTANT
headset and can void the warranty on the product.
With the AAA battery charger provided with your headset When you use the
AAA battery-powered charger to charge your headset, you can get two full
charges from a new AAA battery.
Charging the headset for three hours provides a full charge, charging it for an
hour provides a minimum charge. You must charge your headset for the full three
hours before using it the first time.
Using another AC charger may damage or destroy your
Palm®ultralight wireless headset 3
Charging your headset
Using your Treo smartphone’s AC charger
0
Connect the AC charger to the
1
charging adapter at the base of
your headset carrying pocket
and plug it into a wall outlet.
Insert your headset into the
2
headset carrying pocket. The
indicator light remains red
while your headset is charging.
Charge for three hours for a full
3
charge, and then remove the
AC charger from the headset
carrying pocket. The indicator
light turns off when your
headset is fully charged.
You are now ready to pair your headset and your smartphone. If your headset has
already been paired with your phone, you can begin using the headset
immediately.
3
2
1
4 Palm
®
ultralight wireless headset
Using the AAA battery–powered charger
0
Twist the bottom of the AAA battery–powered charger slightly
1
counterclockwise and remove the battery holder.
Insert the AAA battery into the holder, slide the battery holder back
2
into the battery charger, and turn the battery holder slightly clockwise.
See the figure that appears next to Step 4.
[!]
IMPORTANT
With the shirt clip facing you, separate the charging adapter from your
3
headset carrying pocket by grasping both attachments and gently
bending the outsides forward so that the components snap apart. Do
not twist the components.
Make sure you do not use a rechargeable battery.
Charging your headset
Palm®ultralight wireless headset 5
Charging your headset
Line up the opening on the battery
4
charger with the shirt clip on the
headset carrying pocket, and push
the battery charger into the headset
carrying pocket until it snaps into place.
Insert your headset into the headset carrying pocket. See the figure
5
that appears next to Step 4.
This is done
in Step 5 below.
Headset carrying
pocket
This is done
in this step.
Battery charger
This is done
in Step 2 above.
One AAA battery should be able to completely recharge your headset twice
before you need to replace it. When your headset is fully charged, the red light
turns off.
6 Palm
®
ultralight wireless headset
Pairing your headset with your Bluetooth smartphone
Pairing your headset with your Bluetooth smartphone
Pairing, also known as forming a partnership, creates a unique and encrypted
wireless link between two devices enabled with Bluetooth
such as your Treo smartphone and your Palm ultralight wireless headset.
If pairing is successful, the indicator light flashes blue every five seconds.
[*]
NOTE
process. If it is on, see Turning your headset on and off
Pairing with your Treo smartphone (Palm OS® versions)
0
1
2
3
4
5
Your headset must be turned off before you begin the pairing
Make sure your headset is off, and then press and hold the Call control
button until the headset indicator light alternately flashes red and blue.
On your smartphone, press Applications and select Bluetooth , or
tap the Bluetooth icon at the top of the screen.
Make sure the Bluetooth setting is on.
Select Setup Devices, and then select Hands-free Setup.
Select Next. When the smartphone finds your headset, it displays
“Palm Ultralight” with a headphone icon next to it. Select Palm
Ultralight, and then select OK.
®
wireless technology,
to learn how to turn it off.
Palm®ultralight wireless headset 7
Pairing your headset with your Bluetooth smartphone
A status message appears, telling you that your smartphone is
6
connecting with your headset. When your smartphone asks for a
passkey, enter 0000, and then select OK.
If the Device Select screen appears, select Headset and select Next.
7
On the confirmation screen, select Done.
8
Pairing with your Treo smartphone (Windows Mobile versions)
0
Make sure your headset is off, and then press and hold the Call control
1
button until the headset indicator light alternately flashes red and blue.
On your smartphone, go to the Today screen and tap Bluetooth .
2
Check the Turn on Bluetooth box if it is not already checked.
3
Select the Devices tab, and then select New Partnership. When the
4
smartphone finds your headset, it displays “Palm Ultralight” with a
headphone icon next to it. Select Palm Ultralight, and then select Next.
When your smartphone asks for a passkey, enter 0000, and then select
5
Next.
8 Palm
®
ultralight wireless headset
Pairing your headset with your Bluetooth smartphone
Check the Hands Free box if it is not already checked, and then select
6
Finish. Select OK.
Pairing with other Bluetooth phones
0
Make sure your headset is off, and then press and hold the Call control
1
button until the headset indicator light alternately flashes red and blue.
Set your Bluetooth phone to discover your headset by following your
2
phone’s instruction guide. Typically, the steps involve going to a setup,
connect, or Bluetooth menu on your phone and then selecting the
option to discover a Bluetooth device.
When your phone finds your Palm ultralight wireless headset, a
3
message appears asking if you want to pair; select Ye s or OK.
When a message on your phone screen asks for a passkey, enter 0000,
4
and then select Ye s or OK.
Palm®ultralight wireless headset 9
Loading...