PACE PM 200 User Manual

PM 200 PROCESS MONITOR

PM 200

PROCESS MONITOR

SOLUTIONS FOR THE ELECTRONICS INTERCONNECTION PROCESS

PM 200 PROCESS MONITOR

Sodr-Tek’s Process Monitor 200 provides an easy and convenient
way to monitor your soldering process. The PM 200 measures tip
temperature, tip to ground resistance, and AC tip leakage, allowing
for easy compliance with industry standards. The unit features an
easy to read digital display, grounding jack, and because it is a
“dual voltage” system, it operates on either 120V 60Hz or 230V
50Hz for maximum flexibility. The unit is completely portable so
it can be taken to the production line instead of having to move
soldering stations around which can disrupt operations.

When measuring tip temperature, the unit can be switched from
Celsius to Fahrenheit. The unit comes with 10 replacement
temperature sensors (P/N 1285-0046-P1) and an external K type,
beaded thermocouple for measuring the temperatures of ovens
or solder pots.

The system is uniquely designed in that it comes with a universal
AC inlet cable that plugs directly into the soldering system you are
testing. This ensures a common ground and AC power supply for
the most accurate tip to ground and AC tip leakage testing possible!
The universal power cord eliminates plugging and unplugging
power cords from AC wall outlets which makes calibration
and verification easy, to give you peace of mind.

PM 200

Part Number

Power Requirements

Temperature Scale

Display Resolution

Temperature Range

External Temperature Probe

Tip Temperature Probe Input

Replacement Sensors

Weight

Dimensions

SPECIFICATIONS

8007-0464-P1

120 VAC, 60 Hz & 230 VAC, 50 Hz

Celsius or Fahrenheit

1˚C or 1˚F

1 – 600˚C or 1 – 1200˚F

Standard beaded K-Type

Thermocouple

Replaceable Sensor

10 included, order as

P/N 1285-0046-P1

910 grams (2 lbs)

150mm W x 55mm H x 150mm D

(5.9” x 2.2” x 5.9”)

PM200_Tiptemp_Flyer 1/26/05 9:29 AM Page 1