Ophit DQSP User Manual

Thank you for purchasing DQSP

Optical DVI dual link extender DQSP extends DVI dual link signal up to 300M using two strand s of multi -mode

optic fiber. It support single-link and dual-link DVI resolutions up to 3840x2160.

www.ophit.com

User’s Guide

DVI Dual link Optical Extender

DQSP

User’s Guide

Check the package and make sure you have everything:

Contents
(1) DQSP Transmitter & Receiver
(2) +5V DC Power supply x 2pc
(3) User’s Guide

If any of these items are missing in your package, contact OPHIT or

your supplier for support.

Check your package

Installation

Installation Steps:

1. Connect the Transmitter module to the DVI source device.

2. Connect the Receiver module to the display.

3. Connect two strands of multi-mode SC terminated
fiber optic cable(50/125㎛) from the Transmitter to the Receiver

module.

Each fiber optic port is identified by the letter A or B.
Make sure that the fiber optic cables between the Transmitter and
Receiver are connected to the proper port.

NOTE: Package content may differ if you have placed a special
order or placed order from anywhere other than OPHIT CO., LTD.

OPHIT CO., LTD. reserves the right to make changes without

further notice to a product described herein to improve reliability,
design, packaging or function.