Ophit DAD-U100 User Manual

Thank you for purchasing DAD-U100

Analog to Digital converter DAD-U100 converts your VGA analog signal to DVI digital signal so that display
devices without VGA port can be connected to your PC with VGA port easily and conveniently.

www.ophit.com

User’s Guide

VGA to DVI Converter

DAD-U100

User’s Guide

Check the package and make sure you have everything:

Contents
(1) DAD-U100 – VGA to DVI Converter
(2) +5V DC Power supply x 1pc
(3) User’s Guide

If any of these items are missing in your package, contact OPHIT or
your supplier for support.

Check your package

Installation

Installation Steps:

1. Connect the included +5V DC power supply to DAD-U100 and check
power indicator become active.

2. Connect the source device to DAD-U100 VGA input port.

3. Connect the display device to DAD-U100 DVI output port.

4. Connect the monitoring display device to DAD-U100 VGA output port.
It’s optional.

5. Resolution LED indicator will glow bright green.

NOTE: Package content may differ if you have placed a special
order or placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without
further notice to a product described herein to improve reliability,
design, packaging or function.

VGA Input

DC +5V

Power

DVI & VGA Output

Power LED

indicator

Resolution LED indicator

UXGA

WUXGA

1080p SXGA

XGA