ON Semiconductor NCP552, NCP553, NCV553 Technical data

查询NCP552SQ28T1供应商

NCP552, NCP553, NCV553

80 mA CMOS Low Iq
NOCAP Voltage Regulator

This series of fixed output NOCAP linear regulators are designed
for handheld communication equipment and portable battery powered
applications which require low quiescent. This series features an
ultra−low quiescent current of 2.8 A. Each device contains a voltage
reference unit, an error amplifier, a PMOS power transistor, resistors
for setting output voltage, current limit, and temperature limit
protection circuits. The NCP552 series provides an enable pin for
ON/OFF control.

These voltage regulators have been designed to be used with low
cost ceramic capacitors. The devices have the ability to operate
without an output capacitor. The devices are housed in the
micro−miniature SC82−AB surface mount package. Standard voltage
versions are 1.5, 1.8, 2.5, 2.7, 2.8, 3.0, 3.3, and 5.0 V. Other voltages
are available in 100 mV steps.

Features

• Pb−Free Packages are Available*

• Low Quiescent Current of 2.8 A Typical

• Low Output Voltage Option

• Output Voltage Accuracy of 2.0%

• Industrial Temperature Range of −40°C to 85°C

(NCV553, TA = −40°C to +125°C)

• NCP552 Provides an Enable Pin

T ypical Applications

• Battery Powered Consumer Products

• Hand−Held Instruments

• Camcorders and Cameras

• NCV Prefix for Automotive and Other Applications Requiring Site

and Control Changes

OFF

ON

+

Output

C2

Input

C1

GND Enable

V

+

V

in

out

http://onsemi.com

http://onsemi.com

4

1

SC82−AB (SC70−4)

SQ SUFFIX
CASE 419C

PIN CONNECTIONS &

MARKING DIAGRAMS

GND

1

xxxM

V

2

in

(NCP552 Top View)

GND

1

xxxM

V

2

in

(NCP553, NCV553 Top View)

xxx = Device Code
M = Date Code

4

3

4

3

Enable

V

out

N/C

V

out

This device contains 32 active transistors

Figure 1. NCP552 Typical Application Diagram

GND N/C

Input

+

C1

This device contains 32 active transistors

V

in

Figure 2. NCP553 Typical Application Diagram

 Semiconductor Components Industries, LLC, 2004

September, 2004 − Rev. 5

ORDERING INFORMATION

See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.

*For additional information on our Pb−Free strategy

and soldering details, please download the
ON Semiconductor Soldering and Mounting
Techniques Reference Manual, SOLDERRM/D.

NCP552/D

+

Output

C2

1 Publication Order Number:

V

out

NCP552, NCP553, NCV553

Á

Á

Á

Á

Á

Á

Á

Á

Á

Á

Á

Á

Á

Á

Á

Á

PIN FUNCTION DESCRIPTION

NCP552

ÁÁ

MAXIMUM RATINGS

Input Voltage
Enable Voltage (NCP552 ONLY)
Output Voltage
Power Dissipation and Thermal Characteristics

Power Dissipation

БББББББББББББББББ

Thermal Resistance, Junction−to−Ambient
Operating Junction Temperature T
Operating Ambient Temperature

БББББББББББББББББ

NCP552, NCP553

NCV553

БББББББББББББББББ

Storage Temperature

Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously . If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.

1. This device series contains ESD protection and exceeds the following tests:
Human Body Model 2000 V per MIL−STD−883, Method 3015
Machine Model Method 200 V

2. Latch up capability (85°C) 200 mA DC with trigger voltage.

NCP553

1
2
3
4

−

1
2
3

−

ÁÁ

4

Pin Name

GND

Vin

Vout

Enable

ÁÁ

N/C

Description

Power supply ground.
Positive power supply input voltage.
Regulated output voltage.
This input is used to place the device into low−power standby. When this input is pulled low, the

device is disabled. If this function is not used, Enable should be connected to Vin.

ББББББББББББББББББББББ

No internal connection.

Rating Symbol Value Unit

V

in

Enable

V

out

P

ÁÁÁÁ

ÁÁÁÁ

ÁÁÁÁ

D

R



JA
J

T

A

T

stg

БББББ

БББББ

БББББ

12

−0.3 to V

−0.3 to V

in
in

+0.3
+0.3

Internally Limited

400

+125 °C

−40 to +85

−40 to +125

−55 to +150

V
V
V

W

ÁÁ

°C/W

°C

ÁÁ

ÁÁ

°C

http://onsemi.com

2

NCP552, NCP553, NCV553

ELECTRICAL CHARACTERISTICS (V

in

= V

out(nom.)

+ 1.0 V, V

= Vin, Cin = 1.0 F, C

enable

= 1.0 F, TJ = 25°C, unless

out

otherwise noted.)

Characteristic

Output Voltage (TA = 25°C, I

= 10 mA)

out

1.5 V

1.8 V

2.5 V

2.7 V

2.8 V

3.0 V

3.3 V

5.0 V

Output Voltage (TA = −40°C to 85°C, I

1.5 V

1.8 V

2.5 V

2.7 V

2.8 V

3.0 V

3.3 V

5.0 V

Output Voltage (TA = −40°C, I

= 10 mA)

out

= 10 mA)

out

Symbol Min Typ Max Unit

V

out

V

out

V

out

1.455

1.746

2.425

2.646

2.744

2.94

3.234

4.900

1.455

1.746

2.425

2.619

2.716

2.910

3.201

4.900

1.5

1.8

2.5

2.7

2.8

3.0

3.3

5.0

1.5

1.8

2.5

2.7

2.8

3.0

3.3

5.0

1.545

1.854

2.575

2.754

2.856

3.06

3.366

5.100

1.545

1.854

2.575

2.781

2.884

3.09

3.399

5.100

4.900 5.0 5.100 V

NCV553 −5.0 V

Output Voltage (TA = +125°C, I

= 10 mA)

out

V

out

4.850 5.0 5.150 V

NCV553 −5.0 V

Line Regulation (Vin = V
Load Regulation (I
Output Current (V

1.5 V−3.9 V (V

4.0 V−5.0 V (V

out

= V

in

= 6.0 V)

in

Dropout Voltage (TA = −40°C to 125°C, I

V

−3.0%)

out

1.5 V

1.8 V

2.5 V

2.7 V

2.8 V

3.0 V

3.3 V

5.0 V

Quiescent Current

(Enable Input = 0 V)
(Enable Input = V

Output Short Circuit Current (V

1.5 V−3.9 V (V

4.0 V−5.0 V (V

= V

in

= 6.0 V)

in

Output Voltage Noise (f = 20 Hz to 100 kHz, I

(C

= 1.0 F)

out

Enable Input Threshold Voltage (NCP552 ONLY)

(Voltage Increasing, Output Turns On, Logic High)
(Voltage Decreasing, Output Turns Off, Logic Low)

Output Voltage Temperature Coefficient T

+ 1.0 V to 12 V, I

out

= 1.0 mA to 80 mA, Vin = V

out

= (V

at I

= 80 mA) −3.0%)

out

+ 2.0 V)

o(nom.)

= 0 V)

out

+ 2.0 V)

out

out(nom.)

, I

in

out(nom.)

out

out

= 1.0 mA to I

= 10 mA) Reg

out

+ 2.0 V) Reg

out

= 80 mA, Measured at

, Vin = V

out

+2.0 V)

out

= 10 mA)

load

I

o(nom.)

Vin−V

I

Q

I

out(max)

V

n

V

th(en)

C

line

out

− 2.0 4.5 mV/V

− 0.3 0.8 mV/mA

80
80

−

−

−

−

−

−

−

−

−

−

100
100

180
180

1300
1100

800
750
730
680
650
470

0.1

2.8

300
300

−

−

1800
1600
1400
1200
1200
1000
1000

800

1.0

6.0

450
450

− 90 − Vrms

1.3

−

−

−

−

0.3

− 100 − ppm/°C

3. Maximum package power dissipation limits must be observed.

T

J(max)TA

PD 

4. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible.

R

JA

V

V

mA

mV

A

mA

V

http://onsemi.com

3

NCP552, NCP553, NCV553

DEFINITIONS

Load Regulation

The change in output voltage for a change in output

current at a constant temperature.

Dropout Voltage

The input/output differential at which the regulator output
no longer maintains regulation against further reductions in
input voltage. Measured when the output drops 3.0% below
its nominal. The junction temperature, load current, and
minimum input supply r equirements a ffect t he d ropout l e vel.

Maximum Power Dissipation

The maximum total dissipation for which the regulator
will operate within its specifications.

Quiescent Current

The quiescent current is the current which flows through
the ground when the LDO operates without a load on its
output: internal IC operation, bias, etc. When the LDO
becomes loaded, this term is called the Ground current. It is
actually the difference between the input current (measured
through the LDO input pin) and the output current.

Line Regulation

The change in output voltage for a change in input voltage.
The measurement is made under conditions of low
dissipation or b y using pulse technique such that the average
chip temperature is not significantly affected.

Line Transient Response

Typical over and undershoot response when input voltage
is excited with a given slope.

Thermal Protection

Internal thermal shutdown circuitry is provided to protect
the integrated circuit in the event that the maximum junction
temperature is exceeded. When activated at typically 160°C,
the regulator turns off. This feature is provided to prevent
failures from accidental overheating.

Maximum Package Power Dissipation

The maximum power package dissipation is the power
dissipation level at which the junction temperature reaches
its maximum operating value, i.e. 125°C. Depending on the
ambient power dissipation and thus the maximum available
output current.

http://onsemi.com

4

NCP552, NCP553, NCV553

0.9

0.8

0.7

1

V

out(nom.)

= 3.0 V

80 mA

3.03

3.025

3.02

V

out(nom.)

I

= 5 mA

out

= 3.3 V

Vin = 12 V

0.6
Vin = 4 V

20 10060

0−40

, DROPOUT VOLTAGE (VOLTS)

out

− V

in

V

0.5

0.4

0.3

0.2

0.1

0

−50

40 mA

250−25

50 12575

TEMPERATURE (C)

100

3.015

, OUTPUT VOLTAGE (VOLTS)

3.005

out

V

3.01

3

−60

−20 40 80
TEMPERATURE (C)

Figure 3. Dropout Voltage versus Temperature Figure 4. Output Voltage versus Temperature

, QUIESCENT CURRENT (A)

q

I

3.25

2.75

2.5

2.25

1.75

3

2

−60

I

out

V

in

= 0 mA

= 4 V

0−40

−20 40 80

20 10060

TEMPERATURE (C)

4.5
V

4

I

out

out(nom.)

= 0 mA

= 3 V

3.5

3

2.5

2

1.5

1

, QUIESCENT CURRENT (A)

q

I

0.5

0

0

, INPUT VOLTAGE (VOLTS)

V

in

642

81210

Figure 5. Quiescent Current versus Temperature Figure 6. Quiescent Current versus Input Voltage

, INPUT

in

V

VOLTAGE (V)

200

100

DEVIATION (mV)

OUTPUT VOLTAGE

−100

6

I

5

out

C

4

0

0

1.510.5

2 4.532.5 3.5

TIME (s)

Figure 8. Line Transient Response

4

3.5
3

2.5
2

1.5
1

OUTPUT NOISE (V/Hz)

0.5
0

10 100

10 mA

50 mA

1000 10000 100000

FREQUENCY (Hz)

Figure 7. Output Noise Density

1000000

http://onsemi.com

5

= 1 mA

= 1 F

out

4

NCP552, NCP553, NCV553

600
400
200

0

DEVIATION (mV)

OUTPUT VOLTAGE

150
100

, OUTPUT

50

out

I

CURRENT (mA)

0

0

5
0

ENABLE

VOLTAGE (V)

3
2

(V)

1
0

OUTPUT VOLTAGE

200

Vin = 4 V
C

= 10 F

out

−200

DEVIATION (mV)

−400

OUTPUT VOLTAGE

0

Vin = 4 V
C

= 10 F

out

100

50

, OUTPUT

0

out

I

CURRENT (V)

10

20 50

30 40

TIME (ms)

−50
0

0.5 1 21.5
TIME (ms)

Figure 9. Load Transient Response Figure 10. Load Transient Response

3.5
3

2.5

2

1.5

, OUTPUT VOLTAGE (VOLTS)

out

V

0.5

1

0

0

24 126

Cin = 1 F
C
T

8

= 1 F

out

= 25 C

A

Vin, INPUT VOLTAGE (VOLTS)

I

= 10 mA

out

C

= 1 F

in

= 0.1 F

C

out

V

= 4 V

in

1000

200 700

500

400300 600

TIME (s)

10

Figure 11. Turn−On Response (NCP552 ONLY) Figure 12. Output Voltage versus Input Voltage

http://onsemi.com

6

NCP552, NCP553, NCV553

APPLICATIONS INFORMATION

A typical application circuit for the NCP552 series and

NCP553 series is shown in Figure 1 and Figure 2, front page.

Input Decoupling (C1)

A 1.0 F capacitor either ceramic or tantalum is
recommended and should be connected close to the package.
Higher values and lower ESR will improve the overall line
transient response. If large line or load transients are not
expected, then it is possible to operate the regulator without
the use of a capacitor.
TDK capacitor: C2012X5R1C105K, or C1608X5R1A105K

Output Decoupling (C2)

The NCP552 and NCP553 are very stable regulators and
do not require any specific Equivalent Series Resistance
(ESR) or a minimum output current. If load transients are not
to be expected, then it is possible for the regulator to operate
with no output capacitor. Otherwise, capacitors exhibiting
ESRs ranging from a few m up to 10  can thus safely be
used. The minimum decoupling value is 0.1 F and can be
augmented to fulfill stringent load transient requirements.
The regulator accepts ceramic chip capacitors as well as
tantalum devices. Larger values improve noise rejection and
load regulation transient response.
TDK capacitor: C2012X5R1C105K, C1608X5R1A105K,
or C3216X7R1C105K

Enable Operation (NCP552 ONLY)

The enable pin will turn on the regulator when pulled high
and turn off the regulator when pulled low. These limits of
threshold are covered in the electrical specification section
of this data sheet. If the enable is not used then the pin should
be connected to V

Hints

.

in

Please be sure the Vin and GND lines are sufficiently
wide. When the impedance of these lines is high, there is a

chance to pick up noise or cause the regulator to
malfunction.

Set external components, especially the output capacitor,
as close as possible to the circuit, and make leads as short as
possible.

Thermal

As power across the NCP552 and NCP553 increases, it
might become necessary to provide some thermal relief. The
maximum power dissipation supported by the device is
dependent upon board design and layout. Mounting pad
configuration on the PCB, the board material and also the
ambient temperature effect the rate of temperature rise for
the part. This is stating that when the devices have good
thermal conductivity through the PCB, the junction
temperature will be relatively low with high power
dissipation applications.

The maximum dissipation the package can handle is
given by:

T

PD 

J(max)TA

R

JA

If junction temperature is not allowed above the
maximum 125°C, then the NCP552 and NCP553 can
dissipate up to 250 mW @ 25°C.

The power dissipated by the NCP552 and NCP553 can be
calculated from the following equation:

[

P



Vin*I

tot

gnd(Iout

][

)

Vin V

out

]

*I

out

or

V

inMAX





P

tot

I

gnd

V

out

 I

out

*

I

out

If an 80 mA output current is needed then the ground
current from the data sheet is 2.8 A. For an NCP552 or
NCP553 (3.0 V), the maximum input voltage will then be

6.12 V.

http://onsemi.com

7

NCP552, NCP553, NCV553

SC82 AB

ORDERING INFORMATION

Nominal

Output Voltage

Device

NCP552SQ15T1
NCP552SQ18T1
NCP552SQ25T1
NCP552SQ27T1
NCP552SQ28T1
NCP552SQ30T1
NCP552SQ33T1
NCP552SQ50T1

NCP553SQ15T1
NCP553SQ18T1
NCP553SQ25T1
NCP553SQ27T1
NCP553SQ28T1
NCP553SQ30T1
NCP553SQ33T1
NCP553SQ50T1

NCP553SQ15T1G
NCP553SQ30T1G

NCV553SQ50T1 (Note 6) 5.0 LFT

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

5. Additional voltages in 100 mV steps are available upon request by contacting your ON Semiconductor representative.

6. Automotive qualified.

(Note 5)

1.5

1.8

2.5

2.7

2.8

3.0

3.3

5.0

1.5

1.8

2.5

2.7

2.8

3.0

3.3

5.0

1.5

3.0

Marking Package Shipping

LAW
LAX

LAY

LAZ
LBA
LBB
LBC
LBD

LBE
LBF
LBG
LBH

LBI

LBJ

LBK

LBL

LBE

LBJ

SC82−AB
(SC70−4)

3000 Units/

8″ Tape & Reel

(Pb−Free)

SC82−AB

(SC70−4)

†

http://onsemi.com

8

D3 PL

4

S

12

NCP552, NCP553, NCV553

PACKAGE DIMENSIONS

SC82−AB (SC70−4)

SQ SUFFIX

CASE 419C−02

ISSUE C

NOTES:

1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.

A

G

C

N

3

B

F

L

K

H

J

0.05 (0.002)

2. CONTROLLING DIMENSION: MILLIMETER.

3. 419C−01 OBSOLETE. NEW STANDARD IS
419C−02.

4. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.

DIM MIN MAX MIN MAX

A 1.8 2.2 0.071 0.087
B 1.15 1.35 0.045 0.053
C 0.8 1.1 0.031 0.043
D 0.2 0.4 0.008 0.016
F 0.3 0.5 0.012 0.020
G 1.1 1.5 0.043 0.059
H 0.0 0.1 0.000 0.004
J 0.10 0.26 0.004 0.010
K 0.1 −−− 0.004 −−−
L 0.05 BSC 0.002 BSC
N 0.2 REF 0.008 REF
S 1.8 2.4 0.07 0.09

INCHESMILLIMETERS

http://onsemi.com

9

NCP552, NCP553, NCV553

NOCAP is a trademark of Semiconductor Components Industries, LLC.

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA

Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center

2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051

Phone: 81−3−5773−3850

http://onsemi.com

ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder

For additional information, please contact your
local Sales Representative.

NCP552/D

10