Onkyo TX-SA806, TX SR806 User Manual

Speaker Hookup

QUICK SETUP

Model : TX-SR806/TX-SA806

Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting
speakers and AV components (DVD player, TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,
please see the Instruction Manual.

Speaker Layout (Main Room)

Front right

speaker

Center

speaker

Front left

speaker

Powered

subwoofer

Sub

woofer

Sub

woofer

Surround

Surround
Left

Left

Front

Front
Left

Left

Surround

Surround
Back

Back
Left

Left

TV

TV

Listener

Listener

Center

Center

Front

Front
Right

Right

Surround

Surround
Right

Right

Surround

Surround
Back

Back
Right

Right

5/8''

(15mm)

Surround back

right speaker

Surround right

speaker

See the other side of this sheet for the AV component hookup.

Surround

left speaker

Surround back

left speaker

SN 29344740(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.

* 2 9 3 4 4 7 4 0 *

AV Component Hookup

With an HDMI cable you can send both audio and video with a single cable,
making connecting simple and keeping wires neat.
If you have an HDMI-compatible TV and players, you can connect them
to the AV receiver/AV amplifier with HDMI cables. Digital audio signals received
at HDMI IN input are output by the speakers and headphones connected
to the AV receiver/AV amplifier.

See the other side of this sheet for the Speaker hookup.

If your TV or player doesn’t support HDMI, use the analog or digital
connections shown below.

IF NO HDMI

HDMI

OUT

HDMI

IN

TV

DVD player

DIGITAL

OUT

COAXIAL

AUDIO

OUT

L

R

VIDEO

OUT

DVD player

TV

VIDEO 1

IN

Please ensure the monitor input
(VIDEO 1, VIDEO 2, VIDEO 3, etc.)
selected corresponds to actual
connection used.

HDMI

OUT

Cable/satellite

Using the HDMI Inputs

If there’s no picture on your TV, you’ll need to
assign the HDMI inputs as necessary using the
onscreen setup menus.
If you connect your DVD player to the AV
receiver/AV amplifier’s HDMI IN 1, and connect
your cable or satellite receiver to HDMI IN 3,
as shown above, it’s not necessary to change
the default assignments.

Coaxial feed from
TV antenna

If you are not using

Antenna input

(e.g., RF IN)

Cable/satellite box,
please refer to the
instruction manual.

On the front panel On the front panel

MENU

1. Input Assign

2. Speaker Setup

3. Audio Adjust

4. Source Setup

5. Listening Mode Preset

6. Miscellaneous

7. Hardware Setup

8. Lock Setup

Using the Digital Inputs

If there’s no sound, you’ll need to assign the
digital inputs as necessary using the onscreen
setup menus.
If you connect your DVD player to the AV

1. Input Assign

1. HDMI Input

2. Component Video Input

3. Digital Audio Input

receiver/AV amplifier’s DIGITAL COAXIAL IN 1,
and your cable/satellite receiver to the DIGITAL COAXIAL
IN 3, as shown, it’s not necessary to assign the digital input.

In addition, you must set the “Monitor
Out” setting to “Analog” by pressing
the [HDMI OUT] button first.

DVD

VCR/DVR
CBL/SAT
GAME/TV
AUX

1–1. HDMI Input

HDMI 1

HDMI 2
HDMI 3
HDMI 4

- - - - -

COAXIAL

DIGITAL

OUT

VIDEO

OUT

AUDI O

OUT

L

R

Cable/
satellite

Antenna input

(e.g..RF IN)

Coaxial feed from
TV antenna

If you are not using
Cable/satellite box,
please refer to the
instruction manual.

MENU

1. Input Assign

2. Speaker Setup

3. Audio Adjust

4. Source Setup

5. Listening Mode Preset

6. Miscellaneous

7. Hardware Setup

8. Lock Setup

1. Input Assign

1. HDMI Input

2. Component Video Input

3. Digital Audio Input

1–3. Digital Audio Input

DVD

VCR/DVR
CBL/SAT
GAME/TV

AUX

COAX 1

COAX 2
COAX 3

OPT 1

FRONT