One For All URC1669 User Manual

URC-1669

Instruction manual

URC-1669_Foxtel_2015_7950 Manual_gedrukt 08-05-15 13:47 Pagina 1

2 WW W.ONEFORALL.COM

Introduction

THE KEYPAD

3

SET UP

SETTING UP THE URC-1669

5

Direct code set up 5
Search Method 6

SET-UP CODES

TV : Television / LCD / Plasma / Projector / Rear Projector

. . . . . . .

10

SAT : Satellite Receiver / Set-Top-Box / DVB-S / DVB-T /

Freeview (UK) / TNT (F) / Digitenne (NL) / SAT/HDD

. . . . . . . .

17

CBL : Cable Converter / Set-Top-Box / DVB-C

. . . . . . . . . . . . . . . .

22

VAC : Video Accessory like Media Centres / AV Accessories /

AV Selectors

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

CODE BLINK OUT

(To find out which code is currently programmed)

7

QUICK CODE REFERENCE

7

EXTRA FEATURE

• Volume Punch-Through 8

TROUBLE-SHOOTING

9

CUSTOMER SERVICE

9

Table of Contents

Installing the Batteries

Your URC-1669 needs 2 new “AA/LR6” alkaline batteries.

1 Remove the battery cover from the back of your URC-1669.
2 Match the batteries to the + and - marks inside the battery case,

then insert the batteries.

3 Press the battery cover back into place.

Congratulations on the purchase of the URC-1669. The URC-1669 is a
replacement remote control that can be set up to control 2 devices.

- sat - Satellite Receiver, Digital Box or Cable Box

- tv - Television, Plasma- or LCD TV

The URC-1669 is preprogrammed to control your Foxtel iQ Box (no
set up required). Simply press the “sat” device key and your will
obtain Foxtel iQ Box functionality.

URC-1669_Foxtel_2015_7950 Manual_gedrukt 08-05-15 13:47 Pagina 2

WW W.ONEFORALL.COM 3

The Keypad

1 Power

The POWER key operates the same function it did on
the original remote control.

3 sat (LED) - device key for:

Satellite Receiver, Cable Converter, DSS / Video
Accessory (e.g.Media Centres) Personal Video
Recorder or Hard Disc Recorder.

The red LED (Light Emitting Diode) underneath the
sat key will light up every time a key is pressed in sat
mode.

As default: when in “sat” mode your URC-1669
will be set to control your Foxtel iQ Box.

2 tv (LED) - device key for:

Television, LCD, Plasma, Projector or Rear Projector. The
red LED (Light Emitting Diode) underneath the tv key
will light up every time a key is pressed in tv mode.

4 tv guide

This key gives you the possibility to preview the
complete tv listings.

5 box office

This key allows you to access the Box Office programs.

6 services (setup)

Displays the Setup screen where you can change the
set-top unit’s settings. This key provides a range of
features such as e.g. parental controls, subtitles and
favourites. For your particular device this key may
provide menu control.

7 interactive (active)

This key provides a selection of interactive services.

8 volume +/- Keys

These keys operate in the same way as the keys on
your original remote. In “tv” mode you may obtain

Colour + / - when you press and release the magic
key and then press Volume + / - .

9 channel +/- Keys

These keys operate in the same way as the keys on
your original remote. In “tv” mode you may obtain

Brightness + / - when you press and release the magic
key and then press Channel + / -.

10 Directional Keys

If available on your original remote, these keys will
allow you to navigate through the menu mode of
your device.

11 select

The select key will confirm your choice in the corre­sponding menu.

12 Mute Key

The Mute key operates the same function it did on
your original remote control.

URC-1669_Foxtel_2015_7950 Manual_gedrukt 08-05-15 13:47 Pagina 3

4 WW W.ONEFORALL.COM

13 i (info) Key

This key provides information about the pro
gram you’re watching.

14 back up Key

This key allows you to go back to the previous page.

15 text

Puts the television in the Teletext mode.

16 text off

Switches the television back to regular viewing mode.
On some televisions, this may be done by pressing the
text key several times.

17 16:9

This key provides you the (16:9) wide screen

view function, if available on your original remote).

18 help / FOXTEL

Takes you back to the last channel being watched on
Foxtel, also returns the remote from "AV" mode back
to "Foxtel".

19 Transport Keys

If available these keys operate the transport functions
(PLAY,FF, REW etc.) of your Foxtel iQ Box / Satellite
Receiver / Set Top Box / Cable Box. To prevent
accidental recording, the RECORD key mustbe pressed
twice to start recording.

19 red, green, yellow, blue

After pressing the tv key and accessing the text mode,
the keys marked red, green, yellow and blue, allow
you to access the Fastext functions of your
television. If on your original remote control these
keys are used for Menu navigation, the ONE FOR ALL
Fastext keys may operate in the same way.

20 Number Keys

The Number keys (0-9, / -/--) provide functions just like
your original remote. If your original remote has an
20 key, this function can be found under the AV key.

21 magic Key

The magic key is used to set up your URC-1669.

22 tv/sat Key

In tv mode you will obtain the AV / Input function. In
sat mode you will obtain the “TV/SAT” or “TV/DTV”
function, if available on your original remote.

Please note that the key pad description is mainly based on Foxtel
iQ Box functionality. This may differ from your particular device.

URC-1669_Foxtel_2015_7950 Manual_gedrukt 08-05-15 13:47 Pagina 4

Direct code set up

Example: To set up the URC-1669 for your television:

1 Find the code for your device in the Code list (page 10 - 23).

Codes are listed by device type and brand name.
The most popular code is listed first. Make sure your

device is switched on (not on standby).

2 Press the tv key on the URC-1669 for the device you wish

to Set-Up.

3 Press and hold down the magic key

until the red LED underneath the tv key
blinks twice (the red LED will blink once
then twice).

4 Enter your (four-digit device code) using the number

keys. The red LED will blink twice.

5 Now, aim the URC-1669 at your device and

press POWER If your device switches off, the URC­1669 is ready to operate your device.

6 Turn your device back on and try all the remote’s functions to ensure

they are working properly. If the functions do not work properly,
repeat steps 1-5 using another code listed under your brand.

7 If your device does not respond, follow steps 1 to 5 with

each code listed for your brand. If none of the codes listed
for your brand operate your device, or if your brand is not
listed at all, try the search method described on page 6.

Setting up the URC-1669

Before you start, please read these instructions carefully

Important notes:

- If your Set Top Box is not a standard Foxtel iQ Box, please follow
the steps above pressing “sat” instead of “tv” during step 2.

- Most Televisions do not switch on pressing the POWER key. Please try press­ing a “number” key or the “TV-text off” key to switch your TV back on.

- Some codes are quite similar. If your device does not respond or is not func­tioning properly with one of the codes, try another code listed under your
brand.

- CBL and VAC codes can be set up in “sat” mode.

- Remember to press the correct device key before operating your device.

ONE FOR A



Adyson

Agazi
AGB

Agef

0009
0087, 0093, 0363, 041

0217, 0216
0264

0516
0087

0216, 0009, 0037, 0
0037, 0274

_ _ _ _

x2

WW W.ONEFORALL.COM 5

URC-1669_Foxtel_2015_7950 Manual_gedrukt 08-05-15 13:47 Pagina 5

6 WW W.ONEFORALL.COM

The Search Method

If your device does not respond to the URC-1669 after you have tried all
the codes listed for your brand, try searching for your code. The Search
Method allows you to find the code for your device by scanning through all
the codes contained in the memory of the URC-1669. The Search Method
may also work if your brand is not listed at all.

Example: To search for your TV code:

1 Switch your television on (not on standby) and aim your ONE FOR ALL

at your TV.

2 Press the tv key on your URC-1669.

3 Press and hold down the magic key

until the red LED underneath the POWER key
blinks twice (the red LED will blink once
then twice).

4 Press 9 9 1. The red LED will blink twice.

5 Next, press POWER.

6 Aim the URC-1669 at your Television. Now press CH+ over

and over, until your Television turns off (everytime you
press the CH+ key the URC-1669 will send out a POWER
signal from the next code contained in the
memory). You may have to press this key many times (up
to 150 times) so please be patient. If you skip past a code,
you can go to the previous code(s) by pressing the CH­key. Remember to keep pointing the URC-1669 at your
Television while pressing this key.

7 As soon as your television turns off, press the MAGIC key

to store the code.

Important notes:

- If your Set Top Box is not a standard Foxtel iQ Box, please follow
the steps above pressing “sat” instead of “tv” during step 2.

- Most Televisions do not switch on pressing the POWER key. Please try press­ing a “number” key or the “TV-text off” key to switch your TV back on.

- To search for the code for another device follow the instructions above
only press the appropriate device key instead of TV during step 2.

x2

6 WW W.ONEFORALL.COM

URC-1669_Foxtel_2015_7950 Manual_gedrukt 08-05-15 13:47 Pagina 6

x2

Once you have Set-Up your URC-1669, you can blink back your
SET-UP CODE for future reference.

Example: To blink out your Television code:

1 Press tv once.

2 Press and hold down the magic key

until the red LED underneath the POWER key
blinks twice (the red LED will blink once
then twice).

3 Press 9 9 0. The red LED underneath the POWER key will

blink twice.

4 For the first digit of your four-digit code, press 1 and

count all the red blinks. If there are no blinks, the digit is
"0".

5 For the second digit, press 2 and count all the red blinks.

If there are no blinks, the digit is "0".

6 For the third digit, press 3 and count all the red blinks.

If there are no blinks, the digit is "0".

7 For the fourth digit, press 4 and count all the red blinks.

If there are no blinks, the digit is "0". Now you have

your four-digit code.

Code Blink out

(To find out which code is currently programmed)

Quick Code Reference

Device Code

sat_________________________

tv_________________________

■ ■ ■ ■

■ ■ ■ ■

WW W.ONEFORALL.COM 7

Important notes:

- If your Set Top Box is not a standard Foxtel iQ Box, please follow
the steps above pressing “sat” instead of “tv” during step 2 to
blink out the code programmed in “sat” mode.

URC-1669_Foxtel_2015_7950 Manual_gedrukt 08-05-15 13:47 Pagina 7

When controlling your Set-Top-Box (e.g. Foxtel iQ Box) you normally need
to press the “tv” button first if you wish to control the volume for your
Television. The URC-1669 gives you the possibility to punch though
TV-VOLUME without pressing the tv mode key. This is only possible if you
have programmed the URC-1669 to also control your Television.

To punch through to TV volume while in “sat” mode:

1. Press and hold down the magic key until the
red LED underneath the POWER key blinks twice
(the red LED will blink once then twice).

2. Press 9 9 3.

3. Then press the tv key and the red light will

blink twice.

To cancel the “Volume Punch Through“:

1 Press and hold down the magic key until the

red LED underneath the POWER key blinks twice
(the red LED will blink once then twice).

2. Press 9 9 3.

3. Press the Volume (+) key and the red light will

blink four times.

Volume Punch Through

8 WW W.ONEFORALL.COM

URC-1669_Foxtel_2015_7950 Manual_gedrukt 08-05-15 13:47 Pagina 8