Omron NSJ5-TQ01-G5D, NSJ5-TQ01B-G5D, NSJ5-SQ00-G5D, NSJ5-SQ00B-G5D, NSJ5-SQ01-G5D Brochure

HMI Integrated into a Controller.
The New SYSMAC One One-package Controller for High-precision Control

NSJ Series

Specifications

Model

Controller Section

Display Section

Display device Frame color Effective display area Resolution
NSJ5-TQ00-G5D
NSJ5-TQ00B-G5D
NSJ5-TQ01-G5D
NSJ5-TQ01B-G5D
NSJ5-SQ00-G5D
NSJ5-SQ00B-G5D
NSJ5-SQ01-G5D
NSJ5-SQ01B-G5D
NSJ8-TV00-G5D
NSJ8-TV00B-G5D
NSJ8-TV01-G5D
NSJ8-TV01B-G5D
NSJ10-TV00-G5D
NSJ10-TV00B-G5D
NSJ10-TV01-G5D
NSJ10-TV01B-G5D
NSJ12-TS00-G5D
NSJ12-TS00B-G5D
NSJ12-TS01-G5D
NSJ12-TS01B-G5D

Name

Memory Card
(for the Controller Section
and Display Section)

I/O capacity: 1,280
points
Program capacity:
60K steps
Data memory
capacity: 128K
words (DM: 32K
words, EM: 32K
words x 3 banks)
Function blocks
supported
(algorithms:
ladder diagram or
ST language)

High-definition
TFT color LCD

Color STN LCD

High-definition
TFT color LCD

Ivory
Black
Ivory
Black
Ivory
Black
Ivory
Black
Ivory
Black
Ivory
Black

Ivory
Black
Ivory
Black
Ivory
Black
Ivory
Black

117.2 x 88.4 (W x H) mm
(5.7-inch model)

320 x 240
(QVGA)

162.2 x 121.7 (W x H)
(8.4-inch model)

640 x 480
(VGA)

215.2 x 162.4 (W x H) mm
(10.4-inch model)

246.0 x 184.5 (W x H) mm
(12.1-inch model)

800 x 600
(SVGA)

Model

Display SectionBuilt-in port
RS-232C
port

DeviceNet
port

Ethernet
port

Printer
USB
port

Display
color

View
angle

Language

Standard
screen data
capacity

Slave
USB port

NSJ5-TQ00-G5D
NSJ5-TQ00B-G5D
NSJ5-TQ01-G5D
NSJ5-TQ01B-G5D
NSJ5-SQ00-G5D
NSJ5-SQ00B-G5D
NSJ5-SQ01-G5D
NSJ5-SQ01B-G5D
NSJ8-TV00-G5D
NSJ8-TV00B-G5D
NSJ8-TV01-G5D
NSJ8-TV01B-G5D
NSJ10-TV00-G5D
NSJ10-TV00B-G5D
NSJ10-TV01-G5D
NSJ10-TV01B-G5D
NSJ12-TS00-G5D
NSJ12-TS00B-G5D
NSJ12-TS01-G5D
NSJ12-TS01B-G5D

One port One port

Three ports
Display
Section:
A and B
Controller
Section: C

None

None

10/100
Base-T

None

10/100
Base-T

None

10/100
Base-T

None

10/100
Base-T

None

10/100
Base-T

One
port

256 colors
(32,768
colors for
BMP/JPEG
images)

Left/right
±70°,
Top 75°,
Bottom 50°

Left/right
±50°,
Top 45°,
Bottom 50°

Left/right
±65°,
Top 50°,
Bottom 60°

Left/right
±60°,
Top 35°,
Bottom 65°

Left/right
±60°,
Top 45°,
Bottom 75°

Japanese
and
English

20 MB

60 MB

Model Specifications
HMC-EF372 Flash Memory, 30 MB
HMC-EF672 Flash Memory, 64 MB
HMC-AP001 Memory Card Adaptor

Expansion
Unit

NSJ
Controller
Link Unit

NSJW­CLK21-V1

NSJ
Ethernet
Unit

NSJW­ETN21

Addition of Controller
Link port.
Same as the Controller
Link Unit for CJ-series
PLCs (CJ1W-CLK21-V1).

Addition of Ethernet port.
Same as the Ethernet Unit
for CJ-series PLCs (CJ1W­ETN21).

NSJ
I/O Control
Unit

NSJW-IC101

Addition of CJ-series
Expansion Racks.
Same as CJ-series I/O
Control Unit (CJ1W­IC101).

Full Lineup of Models in the 5.7" to 12" Class and Expansion Units

NSJ Series

Programmable Controller

Other specifications

Options and Expansion Units

CX-One

This catalog mainly provides information that is necessary for selecting suitable models, and
does not contain precautions for correct use. Always read the precautions and other
required information provided in product operation manuals before using the product.

The application examples provided in this catalog are for reference only. Check functions
and safety of the equipment before use.
Never use the products for any application requiring special safety requirements, such as
nuclear energy control systems, railroad systems, aviation systems, medical equipment,
amusement machines, vehicles, safety equipment, or other application involving serious risk
to life or property, without ensuring that the system as a whole has been designed to
address the risks, and that the OMRON products are properly rated and installed for the
intended use within the overall equipment or system.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and
workmanship for a period of one year (or other period if specified) from date of sale by
OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED,
REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR
PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER
OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE
REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, LOSS OF PROFITS, OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH
THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY,
NEGLIGENCE, OR STRICT LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the
product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER
CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE
PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE
MODIFICATION OR REPAIR.

Authorized Distributor:

Note: Specifications subject to change without notice. Cat. No. V403-E1-01

Printed in Japan
0206-1M

Note: Do not use this document to operate the Unit.

OMRON Corporation

Control Devices Division H.Q.

Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: [phone]
Fax: [phone]

Regional Headquarters

OMRON EUROPE B.V.

Wegalaan 67-69, NL-2132 JD Hoofddorp
The Netherlands
Tel:[phone]/
Fax:[phone]

OMRON ELECTRONICS LLC

1 East Commerce Drive, Schaumburg,
IL 60173 U.S.A.
Tel:[phone] /Fax: [phone]

OMRON ASIA PACIFIC PTE. LTD.

83 Clemenceau Avenue,
#11-01, UE Square,
Singapore 239920
Tel:[phone]/Fax :[phone]

OMRON (CHINA) CO., LTD.

Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120 China
Tel: [phone]/Fax: [phone]

Model

Name

CXONE­AL01C-E

1
license

CXONE­AL03C-E

3
licenses

CXONE­AL10C-E

10
licenses

CXONE­AL30C-E

30
licenses

CXONE­AL50C-E

50
licenses

CX-One
FA Integrated
Tool Package
Ver. 1.1

Specifications

Standard Models

The CX-One is an integrated tool
pack that provides programming
and monitoring
software for OMRON PLCs and
components. The CX-One runs on
any of the following
operating systems: Windows 98 SE,
Me, NT 4.0 (Service Pack 6a), 2000
(Service Pack 3 or higher), or XP.
CX-Designer version 1. is included
in the CX-One. Refer to the CX-One
catalog (R134) for details.

Site licenses are also available for users that need to use the CX-One on many computers.
Ask your OMRON representative for details.

CX-One Operating Environment

Recommended memory

256 Mbytes min. (See note 2.)

Hard disk free space

Approx. 1.8 GB or more available space is required
to install the complete CX-One package.

CD-ROM drive Required for installation

Display

SVGA (800 x 600) or better high-resolution display with
256 colors min.

Compatible OS

Recommended CPU

Pentium II 333 MHz or faster processor (Pentium III
1 GHz or faster recommended.)

Windows 98 SE, Me, NT 4.0 (Service Pack 6a),
2000 (Service Pack 3 or higher), or XP (See note 1.)

Note 1: CX-One OS precaution
The CX-One will not run on Microsoft Windows 95 or any other OS not listed above.
If such an OS is being used on the client computer, the OS must be upgraded before
installing the CX-One. System requirements and hard disk space may vary with the
system environment.
2: The amount of memory required varies the Support Software applications used in
CX-One. Refer to use documentation for Individual Support Software for details.

Printed on 100%
Recycled Paper

NSJW-CLK21-V1 Mounted

323

264

140

315

241

15.5

39 (min.)
42 (max.)

7.5

73.3 (NSJ10/12 max. dimensions)

227

89.3 (with Expansion Unit mounted)

1.1

(90.4)

249

No Expansion Unit

No Expansion Unit

No Expansion Unit

43.6

32.2

7.8

69.1

NSJW-CLK21-V1 Mounted

180

177

15.5

232

39 (min.)
42 (max.)

45.7

8.4

64.5

55.6

165

188

1.1

(90.4)

25

142

15.5
145
195

206.3

153.3

34 (min.)
38 (max.)

53.8

5

79 (NSJ5 max. dimensions)

130.5

1.1

(96.1)

95 (with Expansion Unit mounted)

6.5

81.5
77

23.7

44.55

25.4

NSJW-CLK21-V1 Mounted

NSJ12-TS0 (B)-G5D/NSJ10-TV0 (B)-G5D

NSJ5-SQ00 (B)-G5D/NSJ5-TQ0 (B)-G5D

NSJ8-TV0 (B)-G5D

Dimensions

Save Space

Equivalent to the SYSMAC
CJ-series PLCs

Continue Using Your Assets
and Support Tool

Expandable System

Integrated Software

Easy Diagnosis

If there is a failure in the Controller CPU or a DeviceNet master or
slave, information on the failure and the possible
countermeasure is displayed. The user can quickly apply
remedies for errors when they occur without referring to the
manual.

The SYSMAC One NSJ Series is a series of controllers that
include a CPU Unit equivalent to that of the SYSMAC CJ-series
CJ1G-CPU45H. The Display Section also includes a CPU for
display. The control programming therefore remains completely
unaffected even if there is a failure in the Display Section due to
the load on it.

Continue to use all the screen data for NS-series HMIs and ladder
programs for CS/CJ-series PLCs.The CX-Designer for NS-series
HMI and the CX-Programmer for ladder programming can be
used as the Support Software (see note), so customers who have
been using these software packages have no need to learn new
software. Function blocks and the Smart Active Part libraries can
of course also be used.

The system can be expanded with one Expansion Unit
(Controller Link Unit, Ethernet Unit or I/O Control Unit). By using
an I/O Control Unit, any CJ-series Unit until now can be used.

In addition to display screens, Controller Section
programming can also be backed up by following
on-screen instructions.

Built-in Troubleshooter for the Controller CPU and
DeviceNet

Memory Backup Using a Memory Card

Memory
Card

(Controller CPU of
NSJ Controller)

Smart FB

Smart Active Parts

(Display Section of

NSJ Controller)

USB cable

Active

window

FB

Controller Link Unit

Ethernet Unit

I/O Control
Unit

Expansion Unit

CJ-series Expansion Racks
(3 Racks max.)

Expansion Cable

Any one
Unit

Bit A

Connection source

Unit specification

Bit B

Bit C

(BOOL)
EN
(INT)
UnitSelect
(INT)
PortNo
(INT)
TCNo
(INT)
ChannelNo

_E5xx203_ReadSP

(BOOL)

ENO

(BOOL)

BUSY

(BOOL)

OK

(BOOL)

NG

(DINT)

SP

Processing after detecting
the target value

Processing Flag
Bit B
Normal Completion Flag
Bit C
Error Completion Flag
Bit D
Target value
D100

D101

D100

Target value (upper word)

Target value (lower word)

The PLC is located behind the
HMI and the terminal blocks
are placed underneath, so the
layout is extended vertically.

Place the terminal blocks
behind the HMI!

A change in the PLC configuration
extends the arrangement
horizontally, requiring redesigning
of the panel.

No need to redesign the panel.
The width left and right
remains unchanged. Panel
redesigning is not required!

Reduction
above and

below

Use only

a single panel.

PLC

PLC

Terminal blocks

Display

SYSMAC One

SYSMAC One

Control
panel

Control
panel

Issue

Solution

Issue

Solution

Note: The 5.7-inch
NSJ5 is pictured.

Click

Click

Slim NSJ-series Controller Construction

Only 73.3 mm (for the NSJ8/10/12)

Expansion Unit (optional)

One Unit can be mounted. The
Unit is only 16 mm thick.

Controller Section: Controller
CPU and DeviceNet

The CPU is equivalent to
the CJ1G-CPU45H CPU
Unit. The serial port is an
RS-232C port built into the
CPU. The Controller
Section is equipped with
DeviceNet as a standard
feature for I/O.

Display Section: Touch
Panel NS-series PT

The touch panel is based
on the NS-V2 PTs.
Communications with the
Controller Section are
performed using the
Controller Section's
internal bus.

(Unit: mm)

Precise Control Even from
an Integrated Product

Precise Control Even from

an Integrated Product

Precise Control Even from
an Integrated Product

One-package Construction Saves Space and Makes Life Easy

One-package Construction Saves Space and Makes Life EasyOne-package Construction Saves Space and Makes Life Easy

Numerous customers have requested even smaller control
panels. We recognized, however, that there are limits when
combining separate HMI and controllers. Therefore, we
redesigned the shape of the Controller. With it's all-in-one
design, the SYSMAC One NSJ Series saves space as well as
provides a variety of advantages.

FA Integrated
Tool Package
CX-One version 1.1

%BBBB

Serial port number

&1

Temperature Controller unit number

&2

Word number

&2

Note: SYSMAC One NSJ-series NSJ Controllers are supported by CX-One version 1.1 or higher.

73. 3 (NSJ8 max. dimensions

89.3 (with Expansion Unit mounted)

By using FA Integrated Tool Package CX-One, NS/NJ-series
design tool (CX­Designer) and the
network setting tool (CX­Integrator) can be called
up from ladder
programming tool (CX­Programmer).

CX-Programmer

CX-Integrator

CX-Designer

Best match with FA Integrated Tool Package CX-One

Ladder program from CX-Programmer and screen data from
CX-Designer can be quickly transferred. And both the
Controller Section and Display Section can be online at the
same time. Naturally, no cable connection or difficult
communications settings are required. The connection starts
simply by turning ON the power supply.

Easy and Fast Data Transfer Using an Off-the-shelf
USB Cable.

DeviceNet as a standard
feature

The Smart Active Parts are
accessed by selecting

Tools

Library

from the menu

bar of the CX-Designer.

Controller Shapes and Functions Designed to Respond to Customer Requirements for More Compact Machines
The New SYSMAC One One-package Controller NSJ Series