Omron MicroHAWK Installation Manual
MicroHAWK Optics and Lighting
Accessory Kit
Installation Guide
Z435-E-02 (84-9320017-02)
MicroHAWK Optics and Lighting Accessory Kit
Installation Guide
This guide contains instructions for how to install the optical accessories on a MicroHAWK ID/MV-20,
V/F320-F, V/F330-F, V/F420-F and V/F430-F.
Contents
1. MicroHAWK ID/MV-20 Diffuser and Polarizer Kit Installation
2. MicroHAWK V/F3XX-F Diffuser and Polarizer Kit Installation
3. MicroHAWK V/F4XX-F Window and LED Kit Installation
4. MicroHAWK V/F4XX-F With Ring Light Window and LED Kit Installation
5. MicroHAWK V/F4XX-F Polarizer Kit Installation
MicroHAWK Optics and Lighting Accessory List
Type Description Kit Part Number
ID/MV-20
Window Kits
V/F330-F
and
V/F320-F Window
Kits
V/F430-F
and
V/F420-F
Window Kits
V/F430-F
and
V/F420-F
LED Kits
V/F430-F
With Ring Light
Window Kits
V/F430-F
With Ring Light
LED Kits
Kit, Diffuser, MicroHAWK ID/MV-20 98-9000077-01
Kit, Polarizer, MicroHAWK ID/MV-20 98-9000062-01
Kit, Diffuser, MicroHAWK V/F330 V330-AF1
Kit, Polarizer, MicroHAWK V/F330 V330-AF2
Kit, Window, V/F4XX V430-AF10*
Kit, Diffuser, V/F4XX V430-AF11*
Kit, Polarizer, V/F4XX V430-AF12*
Kit, YAG Filter, V/F4XX V430-AF4
Kit, ESD Window, V/F4XX V430-AF5
Kit, Red Filter, V/F4XX V430-AF6
Kit, Blue Filter, V/F4XX V430-AF7
Kit, Red LED, V/F4XX V430-ALR
Kit, White LED, V/F4XX V430-ALW
Kit, Blue LED, V/F4XX V430-ALB
Kit, IR LED, V/F4XX V430-ALI
Kit, Window, RING LT, F/V430 V430-AF0R
Kit, Diffuser, RING LT, F/V430 V430-AF1R
Kit, Polarizer, RING LT, F/V430 V430-AF2R
Kit, Red LED, RING LT, F/V430 V430-ALRR
Kit, White LED, RING LT, F/V430 V430-ALWR
Kit, Blue LED, RING LT, F/V430 V430-ALBR
Kit, IR LED, RING LT, F/V430 V430-ALIR
MicroHAWK ID/MV-20 Diffuser and Polarizer Installation
Diffuser Kit Hardware, MicroHAWK ID/MV-20
Qty Description Kit Part Number
1
Diffuser Kit Installation, MicroHAWK ID-20/MV-20
Step 1: Peel the protective liner from the adhesive on the diffuser.
Step 2: Rest the narrow edge of the diffuser on the bottom edge of the window opening at an angle as
shown below.
Step 3: Center the diffuser left-to-right in the window opening.
Step 4: Affix the diffuser to the window.
Step 5: Run your finger over the surface of the diffuser using light pressure to complete the bond.
Kit, Diffuser, MicroHAWK ID/MV-20 98-9000077-01
Polarizer Kit Hardware, MicroHAWK ID-20/MV-20
Qty Description Kit Part Number
1
Kit, Polarizer, MicroHAWK ID/MV-20 98-9000062-01
Polarizer Kit Installation, MicroHAWK ID-20/MV-20
Step 1: Peel the protective liner from adhesive on the polarizer.
Step 2: Rest the narrow edge of the polarizer on the bottom edge of the window opening at an angle as
shown below.
Step 3: Center the polarizer left-to-right in the window opening.
Step 4: Affix the polarizer to the window.
Step 5: Run your finger over the surface of the polarizer using light pressure to complete the bond.
MicroHAWK V/F320 and V/F330 Diffuser and Polarizer Installation
Diffuser Kit Hardware, MicroHAWK V/F330 and V/F320
Qty Description Kit Part Number
1
Diffuser Kit Installation, MicroHAWK V/F330 and V/F320
Step 1: Follow same steps as above for the ID/MV-20
Note: Take care to align the Diffuser so that the narrow edge is at bottom, that there is an equal gap
laterally, and that the bottom edge is aligned with bottom edge of window.
.
Kit, Diffuser, MicroHAWK V/F330 V330-AF1
Polarizer Kit Hardware, MicroHAWK V/F330-F and V/F320-F
Qty Description Kit Part Number
1
Kit, Polarizer, MicroHAWK V/F330 V330-AF2
Polarizer Kit Installation, MicroHAWK V/F330 and V/F320
Step 1: Follow same steps as above for the ID/MV-20
Note: Take care to align the Polarizer so that the narrow edge is at bottom, that there is an equal gap
laterally, and that the bottom edge is aligned with bottom edge of window.
Loading...