Omron HGM-112 User Manual

AUTO

BASIC

BLOOD GLUCOSE

MONITORING SYSTEM

HGM-112

INSTRUCTION MANUAL

IMPORTANT SAFETY PRECAUTIONS

READ BEFORE USE

1. Use this device ONLY for the intended use described in this manual.

2. Do NOT use accessories which are not specified by the manufacturer.

3. Do NOT use the device if it is not working properly or if it is damaged.

4. Do NOT use the equipment in places where aerosol sprays are being
used or where oxygen is being administered.

5. Do NOT use under any circumstances the device on neonates or infants.

6. This device does NOT serve as a cure for any symptoms or diseases.
The data measured is for reference only. User should not take any
decision of medical relevance without first consultation of medical
practitioner. Always consult your doctor to have the results interpreted.

7. Before using this device to test blood glucose, read all instructions
thoroughly and practice the test. Carry out all the quality control checks
as directed.

8. Use this instrument in a dry environment, if synthetic materials are
present (synthetic clothing, carpets etc.) it may cause damaging static
discharges that may cause erroneous results.

9. Do not use this instrument in close proximity to sources of strong
electromagnetic radiation, as these may interfere with the accurate
operation.

10.Do not use this meter near cellular or cordless telephones, walkie
talkies, garage door openers, radio transmitter, or other electrical or
electronic equipment that are sources of electromagnetic radiation, as
these may interfere with the proper operation of the meter.

11.The device for self-testing is used for the monitoring of an existing
disease (eg., diabetes), before changing treatment patients should refer
to a medical professional.

BLOOD GLUCOSE MONITORING SYSTEM-HGM-112

Contents

Chapter 1 HGM-112 Blood Glucose System

1.1 Introduction

1.2 Intended Use

1.3 List of Box Contents

1.4 Product and Meter Display

Chapter 2 Installing and Setting up the HGM-112 meter

2.1 Inserting / replacing battery

2.2 Performing a blood glucose test

Chapter 3 Finger Blood Glucose Testing

3.1 Preparation before glucose testing

3.2 Fingertip blood measurment

3.3 Alternate Site Testing (AST)

Chapter 4 Glucose Control Solution Testing (Optional)

4.1 HGM-112 system testing

2
2
3
3

5
6

7
8

12

14

Chapter 5 Caring for Your Strips and Meter

5.1 Caring for the strips

5.2 Caring for the meter

Chapter 6 Troubleshooting

Chapter 7 HGM-112 Performance Characteristics

Chapter 8 Specifications

8.1 Specification of HGM-112 meter

17
17

18

19

20

1

BLOOD GLUCOSE MONITORING SYSTEM-HGM-112

Chapter 1 HGM-112 Blood Glucose System

1.1 Introduction

The HGM-112 system measures the small electrical current and displays
the blood glucose results. The current is produced from the blood
glucose mixing well with chemicals on the test strip.

User needs to apply 1μL of fresh capillary whole blood for one test, and

the test result will be displayed in 5 seconds.Besides that, HGM-112 also
has unique strip technology with auto coding system. Users don’t need
to code the glucose meter.

1.2 Intended Use

Only the HGM-STP1A blood glucose test strips are used with HGM-112

meter. They are designed for users to measure the glucose

concentration in fresh capillary whole blood obtained from fingertips and

palm. HGM-112 system is intended to be used by people with diabetes

at home.

Warning: HGM-112 system should not be used for screening, diagnosis
of diabetes or testing neonates.

Warning: Do not change the therapy according to HGM-112 meter test
result without consulting healthcare professional. If you have
any question about the test results, please discuss with your
healthcare professionals.

Warning: Only for in-vitro diagnostic test.

Warning: Please read system instruction manual and strip manual

carefully

2

1.3 List of Box Contents

1. HGM-112 Glucose Meter

2. Lancing Device

3. AST Cap

4. 10 pcs Lancets

5. Carrying Case

6. Instruction Manual

7. Log Book

8. CR2032 x 1

1.4 Product and Meter Display

A.HGM-112 Blood Glucose Meter Display

Meter Display

Strip Slot ­Insert test strip
here

BLOOD GLUCOSE MONITORING SYSTEM-HGM-112

Battery Compartment

Caution: This meter will not display mmol/L.

C

BLOOD GLUCOSE MONITORING SYSTEM-HGM-112

B.HGM-STP1A Blood Glucose Test Strip

Warning: Touch the drop of sample to the top edge of the confirmation
window of the test strip. Do not smear sample on the strip.

. Function Display

Blood icon

Strip

Top Edge - Apply blood sample here

Confirmation Window

Inserting Bar - Insert this test strip into the
meter’s strip slot with this face up

Glucose data

Battery

Unit

4

BLOOD GLUCOSE MONITORING SYSTEM-HGM-112

Chapter 2 Installing and Setting up the HGM-112 Meter

2.1 Inserting/replacing battery

When should users change the battery?

1. When the symbol shows on the display, it means the battery
power is low and need to replace a battery as soon as possible. Even
the battery power is low, HGM-112 meter still can work well:
You still can use HGM-112 and the test results will still be accurate,
but we strongly suggest you replace the battery as soon as possible.

2. There is not enough power to support HGM-112 to operate whe
the symbol is shown on display after powering on. Thus, the
meter will shut down after 20 seconds when the symbol is shown
on display after powering on. It represents that the battery power is too
low to perform a test. You have to replace the battery to continue using
the HGM-112 meter.

How to replace HGM-112’s battery

1. Turn HGM-112 to the back side and open the battery compartment.

2. Take out the battery and insert one CR2032 battery with the (+) sign
facing up.

3. Push back the battery compartment until hearing a “click” sound.

4. After a new battery is inserted and the cover is shut, the device is
powered on automatically for 2 seconds. If not, please check the above
steps.

a. Open battery compartment

5

BLOOD GLUCOSE MONITORING SYSTEM-HGM-112

b. Take out and insert a new battery

c. Push back the battery compartment

Warning: Dispose of old battery according to your local
environmental regulations.

2.2 Performing a blood glucose test

A. Inserting a test strip

1. Insert the test strip into strip slot correctly; the HGM-112 meter will turn
on. All LCD segments will display for 1 second.

2. Then the display will show the latest test result for 2 seconds.

6