Omron E5cn-h Temperatura

Advanced Digital Temperature Controller

96 × 96 mm

E5AN-H

48 × 96 mm

E5EN-H

For the most recent information on models that have been certified fo safety standards, refer to your OMRON website.

E5AN-HSS@-500, E5EN-HSS@-500 in this catalog have been discontinued at the end of March 2018.

Refer to Safety Precautions for E5@N/E5@N-H.

Refer to Operation for E5@N/E5@N-H for operating procedures.

• Auto/manual switching

• Temperature Controller status display

• Simple program function

• Logic operations

• Control output ON/OFF count alarm

• PV change rate alarm

• Models available with RS-485, RS-422, or RS-232C communications

Event Inputs

• None

• Two

• Four

Universal Sensor Inputs

• Universal thermocouple/ Pt/analog (current/voltage) inputs.

Indication Accuracy

• Thermocouple/Pt input: ±0.1% of PV

• Analog input: ±0.1% FS

Sampling Period

• 60 ms

PF Key (Programmable key function)

Auxiliary Outputs

• Two

• Three

Remote SP Input

• One

3-level Display Simultaneously displays set items, such as the PV, SV, and MV.

5-digit Display with high resolution of 0.01°C

Infrared port

E5AN-H E5EN-H

Computer Support Software CX-Thermo

USB

Control Output 1 (built-in)

• SSR outputs *

Output Unit

• Relay output

• Voltage output (for driving SSR)

• Current output

• Linear voltage output

Control Output 2 (built-in)

• SSR outputs *

Output Unit

• Relay output

• Voltage output (for driving SSR)

• Current output

• Linear voltage output

* Orders will not be accepted after

March 31, 2018.

E5AN-H/E5EN-H

(96 x 96 mm and 48 x 96 mm)

A New High-performance Controller: High Resolution, High Speed, and High Input Accuracy. Logic Operations and Preventive Maintenance Function. Plus Infrared Port on Front Panel.

• High-resolution display with 5 digits/0.01°C display.

• High-speed sampling cycle of 60 ms.

• High Accuracy Thermocouple/Pt input: ±0.1% of PV Analog input: ±0.1% FS

• Universal inputs on all models (thermocouple, PT, or analog input) to handle various sensors with one Controller. Models also available with Remote SP. A PV/SV-status display function can be set to automatically alternate

• between displaying the status of the Temperature Controller (auto/ manual, RUN/STOP, and alarms) and the PV or SV.

• Flexible contact outputs with logic operations (AND, OR, and delays) set from the Support Software (CX-Thermo Ver. 4.0)

• Preventive maintenance for relays in the Temperature Controller using a Control Output ON/OFF Counter.

• Model available with position-proportional control

CSM_E5AN-H_E5EN-H_DS_E_3_13

Main I/O Functions

Lineup

1 23456789 1110

E5AN/E5EN-@@@@@@@M@-@-500

E53-@

1 2

E53-@@

This data sheet is provided as a guideline for selecting products. Be sure to refer to the following user manuals for application precautions and other information required for operation before attempting to use the product.

E5CN-H/E5AN-H/E5EN-H Digital Controllers User's Manual Advanced Type (Cat. No. H157)

E5CN-H/E5AN-H/E5EN-H Digital Controllers Communications Manual Advanced Type (Cat. No. H159)

E5AN-H/E5EN-H

Advanced Type

Note: The Controller can be used for heating/cooling control even if only 1 control output is used.

Terminal block

Fully universal input

Model Number Structure

Model Number Legend

Controllers

1. Type

H: Advanced

2. Control Mode

Blank: Standard or heating/cooling control P: Position-proportional control

3. Control Output 1

A: Control Output Unit R: Relay output S: SSR output *

4. Control Output 2

A: Control Output Unit R: Relay output S: SSR output *

5. Auxiliary Outputs

2: Two outputs 3: Three outputs

6. Option 1

Blank: None H: Heater burnout/SSR failure/Heater overcurrent detection (CT1) HH: Heater burnout/SSR failure/Heater overcurrent detection

(CT2)

7. Option 2

B: Two event inputs BF: Event input + Transfer output

8. Option 3

M: Option Unit can be mounted.

9. Power Supply Voltage

Blank: 100 to 240 VAC D: 24 VAC/VDC

10.Case Color

Blank: Black W: Silver

11.Terminal Cover

-500: With Terminal Cover

Option Units

1. Function

EN01: RS-232C communications EN02: RS-422 communications EN03: RS-485 communications AKB: Event input

Output Units

1. Control Output

R: Relay output Q: Voltage output (for driving SSR)

Q3: Voltage output (for driving SSR) + 24 VDC (NPN) Q4: Voltage output (for driving SSR) + 24 VDC (PNP) C3: Current output + 4 to 20 mA DC C3D: Current output + 0 to 20 mA DC V34: Linear voltage output + 0 to 10 VDC V35: Linear voltage output + 0 to 5 VDC

2. Version

Blank: Available for E5AN-E5EN-H. N: Available only for E5AN-H/E5EN-H.

1 control output

2 control outputs

2 auxiliary outputs

* Orders will not be accepted after March 31, 2018.

Ordering Information

E5AN-H

Power

Case

Size

1/4 DIN 96 × 96 × 78 (W × H × D)

color

Black

Silver

supply

voltage

100 to 240 VAC

24 VAC/ VDC

100 to 240 VAC

24 VAC/ VDC

* Orders will not be accepted after March 31, 2018.

Control method

Basic

Valve 2

Basic

Valve 2

Basic 2

Auxiliary

output

Control Output Unit × 21 2

SSR outputs × 212

Control Output Unit × 22 2

SSR outputs × 222

Control Output Unit × 22

SSR outputs × 22

Relay outputs × 22

Control Output Unit × 21 2

SSR outputs × 212

Control Output Unit × 22 2

SSR outputs × 222

Control Output Unit × 22

SSR outputs × 22

Relay outputs × 22

Control Output Unit × 21 2

Control Output Unit × 22 2

Control Output Unit × 21 2

Control output 1/2

Heater

burnout

Optional functions

Event

inputs

Transfer

4 to 20-mA output

output

RSP

4 to 20-mA input

E5AN-H/E5EN-H

Model

E5AN-HAA2HBM-500

E5AN-HSS2HBM-500 *

E5AN-HAA2HHBFM-500

E5AN-HSS2HHBFM-500 *

E5AN-HAA3BFM-500

E5AN-HSS3BFM-500 *

E5AN-HPRR2BM-500

E5AN-HPRR2BFM-500

E5AN-HAA2HBMD-500

E5AN-HSS2HBMD-500 *

5AN-HAA2HHBFMD-500

E5AN-HSS2HHBFMD-500 *

E5AN-HAA3BFMD-500

E5AN-HSS3BFMD-500 *

E5AN-HPRR2BMD-500

E5AN-HPRR2BFMD-500

E5AN-HAA2HBM-W-500

E5AN-HAA2HHBFM-W-500

E5AN-HAA2HBMD-W-500

E5EN-H

Size

1/8 DIN 48 × 96 × 78 (W × H × D)

Case color

Black

Silver

* Orders will not be accepted after March 31, 2018.

Power supply

voltage

100 to 240 VAC

24 VAC/VDC

100 to 240 VAC

24 VAC/VDC Control Output Unit × 21 2

Control method

Basic

Valve 2

Basic

Valve 2

Basic 2

Auxil-

output

Control output 1/2

iary

Control Output Unit × 21 2

SSR outputs × 212

Control Output Unit × 22 2

SSR outputs × 222

Control Output Unit × 22

SSR outputs × 22

Relay outputs × 22

Control Output Unit × 21 2

SSR outputs × 212

Control Output Unit × 22 2

SSR outputs × 222

Control Output Unit × 22

SSR outputs × 22

Relay outputs × 22

Control Output Unit × 21 2

Control Output Unit × 22 2

Heater

burn-

out

Optional Functions

Event

inputs

Transfer

output

4 to 20-mA output

E5AN-H/E5EN-H

RSP

4 to 20-mA input

E5EN-HAA2HBM-500

E5EN-HSS2HBM-500 *

E5EN-HAA2HHBFM-500

E5EN-HSS2HHBFM-500 *

E5EN-HAA3BFM-500

E5EN-HSS3BFM-500 *

E5EN-HPRR2BM-500

E5EN-HPRR2BFM-500

E5EN-HAA2HBMD-500

E5EN-HSS2HBMD-500 *

-HAA2HHBFMD-500

E5E

E5EN-HSS2HHBFMD-500

E5EN-HAA3BFMD-500

E5EN-HSS3BFMD-500 *

E5EN-HPRR2BMD-500

E5EN-HPRR2BFMD-500

E5EN-HAA2HBM-W-500

E5EN-HAA2HHBFM-W-500

E5EN-HAA2HBMD-W-500

Model

Accessories (Order Separately)

Output unit Model Specifications

Relay output

Voltage output (for driving SSR)

Current output

Linear

E53-RN

E53-QN

E53-Q3

E53-Q4

E53-C3N

E53-C3DN

E53-V34N

voltage output

E53-V35N

USB-infrared Conversion Cable

USB-Serial Conversion Cable

SPST-NO, 250 VAC, 5 A (resistive load), electrical life: 100,000 operations

12 VDC (PNP), max. load current: 40-mA, with short-circuit protection

24 VDC (NPN), max. load current: 20-mA, with short-circuit protection

24 VDC (PNP), max. load current: 20-mA, with short-circuit protection

4 to 20-mA DC, load: 600 Ω max., resolution: approx. 10,000

0 to 20-mA DC, load: 600 Ω max., resolution: approx. 10,000

0 to 10 VDC, load: 1 kΩ min., resolution: approx. 10,000

0 to 5 VDC, load: 1 kΩ min., resolution: approx. 10,000

Model

E58-CIFIR

Model

E58-CIFQ1

Terminal Cover

Connectable models Model

E5AN-H

E5EN-H

E53-COV16

Note: The Terminal Cover comes with the E5CN-@@@-500 models.

Mounting Brackets

Model

Y92H-9

Note:

These Mounting Brackets are provided with the Digital Controller.

Waterproof Packing

Connectable models Model

E5AN-H Y92S-P4

E5EN-H Y92S-P5

Note: The Waterproof Packing is included with the Controller.

Current Transformers (CTs)

Hole diameter Model

5.8 dia. E54-CT1

12.0 dia. E54-CT3

CX-Thermo Support Software

Model

EST2-2C-MV4

E5AN-H/E5EN-H

Specifications

Ratings

Power supply voltage

Operating voltage range 85% to 110% of rated supply voltage

Power consumption

Sensor input

Input impedance Current input: 150 Ω max., Voltage input: 1 MΩ min. (Use a 1:1 connection when connecting the ES2-HB-N.)

Control method ON/OFF control or 2-PID control (with auto-tuning)

Relay output

Voltage output (for driving SSR)

Control output

Auxiliary output

Event input

Logic operations

Transfer outputs

RSP input

Setting method Set digitally using keys on the front panel or by using the RSP input.

Indication method

Bank switching

Other functions

Ambient operating temperature −10 to 55°C (with no condensation or icing), for 3-year warranty: −10 to 50°C

Ambient operating humidity 25% to 85% Storage temperature −25 to 65°C (with no condensation or icing)

Current output

Linear voltage output

Relay output for position-proportional control

Number of outputs 2 or 3 max.

Output specifications

Number of outputs 2 or 4 (with an E53-AKB)

External contact input specifications

Number of operations 8 max.

Operations

Output One work bit per operation

Work bit assignment

Number of outputs 1 max. (Depends on model. Models with transfer output (F in model number) Output specifications Current output: 4 to 20 mA DC, Load: 600 Ω max., Resolution at 4 to 20 mA: Approx. 10,000

Number of inputs 1 Signal type Current input: 4 to 20 mA (input impedance: 150 Ω ±10%)

Analog input scaling

Accuracy (±0.2% of FS) ±1 digit max.

Input sampling period 60 ms

No D in model number: 100 to 240 VAC, 50/60 Hz D in model number: 24 VAC, 50/60 Hz; 24 VDC

100 to 240 VAC: 12 VA 24 VAC/VDC: 8.5 VA (24 VAC)/5.5 W (24 VDC)

Any of the following can be selected. Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II Platinum resistance thermometer: Pt100 or JPt100 Current input: 4 to 20 mA or 0 to 20 mA Voltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 V

Output Unit (Install the Output Unit (sold separately).)

Relay output: Open and close: SPST-NO, 250 VAC, 1 A (including in-rush current), electrical life: 100,000 operations min. Potentiometer input: Must be between 100 Ω and 2.5 kΩ for maximum open position.

Relay output: SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5 V, 10 mA

Contact input: ON: 1 kΩ max., OFF: 100 kΩ min.

Non-contact input: ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.

Current flow: Approx. 7 mA per contact

• Logic operation: Any of the following four patterns can be selected. The input status may be inverted.

• Delay: ON delay or OFF delay for the results of the logic operation given above.

• Output inversion: Possible

Any of The following can be assigned to up to eight work bits (logic operation results): Event input operations, auxiliary outputs, or control outputs.

Scaling of signal to engineering units (EU)

−19,999 to 30,000 (display: 30,000 max.)

11-segment digital display and individual indicators (7-segments displays also possible) Character height: E5AN-H: PV: 15.8 mm, SV: 9.5 mm, MV: 6.8 mm; E5EN-H: PV: 11.8 mm, SV: 8.1 mm, MV: 5.8 mm Content of 3-level display: PV/SV/MV, PV/SV/Bank No., or soak time remain Number of digits: 5 for PV and SV, 4 for MV

Supported (number of banks: 8) Local SP, alarm settings, PID sets (PID constants, MV upper limit, MV lower limit, etc.)

Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout detection, 40% AT, 100% AT, MV limiter, input digital filter, self-tuning, temperature input shift, run/stop, protection functions, control output ON/OFF counter, extraction of square root, MV change rate limit, PV/SV status display, logic operations, automatic cooling coefficient adjustment

(A and B) or (C and D), (A or C) and (B or D), A or B or C or D, A and B and C and D (A, B, C, and D are four inputs.)

Setting time: 0 to 9999 s or 0 to 9999 min

Input Ranges

Shaded settings are the default settings. The applicable standards for the input types are as follows: K, J, T, E, N, R, S, B: JIS C 1602-1995, IEC 584-1 L: Fe-CuNi, DIN 43710-1985 U: Cu-CuNi, DIN 43710-1985 W: W5Re/W26Re, ASTM E988-1990

JPt100: JIS C 1604-1989, JIS C 1606-1989 Pt100: JIS C 1604-1997, IEC 751 PL II: According to Platinel II electromotive force charts from BASF (previously

Engelhard)

Thermocouple/Platinum Resistance Thermometer (Fully Universal Inputs)

Input

type

Name Pt100 JPt100 K J T E L U N R S B W

Temperature range (°C)

−100.0

−200.0

Setting number

Platinum resistance

thermometer

2300

1800

1700

1600

1500

1400

1300

1200

1100

1000

850.0 850.0 850.0

900

800

700

600

500.0 500.0 500.0

500

400

300

200

100

−200.0−199.9 −199.9 −200.0 −200.0−199.9 −200.0 −200.0 −199.9−200.0

200.00 200.00 200.00 200.00

100.0 100.0

0.0 0.0 0.0 0.0 0.0 0.0

−50.00 −20.0 −50.00 −100.0 −20.0 −50.00 −50.00 −100.0

1300.0 1300.0 1300.0

400.0 400.0 400.0 400.0 400.0

Thermocouple Analog input

1800.0

1700.01700.0

600.0

100.0

01224345 6 21 7 8 22 9 102311121314151617181920 25 26 27 28 29

E5AN-H/E5EN-H

4 to

0 to

20 m

1 to 5V0 to 5V0 to

20 m

Usable in the following ranges by scaling:

−19999 to 32400,

−1999.9 to 3240.0,

−199.99 to 324.00, or

−19.999 to 32.400

2300.0

10 V

+ 11 hidden pages

Omron E5cn-h Temperatura

Specifications and Main Features

Frequently Asked Questions

User Manual